{"title":"Axe Offroad","description":null,"products":[{"product_id":"24x12-polished-wheel-af14-lex-6x135-6x5-5-44-241212h-44af14fp","title":"AF14 Lex Polished | 24x12 | 6x135\/6x5.5 -44mm Offset | 241212H-44AF14FP","description":"\u003cp\u003eFord and GM Truck Fitment in Two Bolt Patterns\u003c\/p\u003e\u003cp\u003eThe Axe Forged AF14 Lex is a 24x12 forged wheel drilled for both 6x135 and 6x139.7 (6x5.5) bolt patterns, covering a wide range of full-size truck and SUV platforms. On the 6x135 side, it fits the Ford F-150 (2004-2026), Ford Expedition (2003-2027), Lincoln Navigator (2003-2027), Ford F-150 Lightning (2022-2026), and Ford Bronco (2022-2026), plus one additional verified platform. The 6x139.7 pattern opens the door to GM full-size trucks and SUVs, including the Chevrolet Silverado 1500, GMC Sierra 1500, Tahoe, Suburban, Yukon, and Escalade, as well as Toyota Tundra, Tacoma, 4Runner, Nissan Titan, and similar applications. The 106mm hub bore fits these platforms, and the 2,600-lb load rating supports full-size truck payloads.\u003c\/p\u003e\u003cp\u003eSplit Eight-Spoke Mesh, Concave Face\u003c\/p\u003e\u003cp\u003eThe AF14 Lex carries a split eight-spoke mesh design with a concave face that gives the wheel visual depth and a layered profile. The eight split spokes fan outward from the hub in a tight mesh pattern, creating an open, detailed face that suits aggressive truck builds. Lug hardware is exposed and visible on the face, sitting in a circle around the hub bore where the wheel mounts to the vehicle. The outer lip adds further depth to the profile, and a center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eForged Construction, Polished Finish\u003c\/p\u003e\u003cp\u003eAxe Forged builds the AF14 Lex from a solid aluminum billet pressed under extreme force, refining the grain structure for density and strength throughout the wheel. At 24x12 inches and 60 lbs, the forged construction delivers the structural integrity this size demands while keeping the wheel's profile clean and the spoke geometry sharp. The polished finish is a full bright polish across the face, spokes, and lip, producing a mirror-like surface that suits show-quality builds and attention-forward truck setups.\u003c\/p\u003e\u003cp\u003eAggressive Offset for a Wide Stance\u003c\/p\u003e\u003cp\u003eAt -44mm, the mounting surface sits well rearward of the wheel's centerline, pushing the wheel outward for a wide, aggressive stance. On a 12-inch-wide barrel, this offset combination qualifies as genuinely aggressive fitment, with the wheel face sitting outboard for pronounced poke and a planted, wide-track presence. The 4.77 inches of backspacing reflects the outboard positioning. This combination is built for trucks running a lift kit, where the added clearance accommodates the wheel's outboard position and the 24-inch diameter.\u003c\/p\u003e\u003cp\u003ePart of a Broader AF14 Lex Lineup\u003c\/p\u003e\u003cp\u003eThe AF14 Lex is available in additional sizes, widths, finishes, and bolt-pattern options across the lineup, so if this specific combination does not match your build, other configurations are offered to cover a range of truck setups.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x135 \/ 6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-44 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.77\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePolished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eForged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e60 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Axe Offroad","offers":[{"title":"Default Title","offer_id":68712993030425,"sku":"241212H-44AF14FP","price":1315.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/af14lex_polished_6lug_white__89323.jpg?v=1794772214"},{"product_id":"24x14-polished-wheel-af14-lex-6x135-6x5-5-76-241412h-76af14fp","title":"AF14 Lex Polished | 24x14 | 6x135\/6x5.5 -76mm Offset | 241412H-76AF14FP","description":"\u003cp\u003eFord and GM 6-Lug Fitment in One Wheel\u003c\/p\u003e\u003cp\u003eThe Axe Forged AF14 Lex is dual-drilled for both 6x135 and 6x139.7 (6x5.5) bolt patterns, covering Ford F-150 (2004-2026), Ford Expedition (2003-2027), Lincoln Navigator (2003-2027), Ford F-150 Lightning (2022-2026), and Ford Bronco (2022-2026), plus one additional verified platform. The 6x139.7 pattern extends fitment to GM full-size trucks and SUVs, including the Silverado 1500, Sierra 1500, Tahoe, Suburban, Yukon, and Escalade, as well as Toyota Tundra, 4Runner, Sequoia, Nissan Titan, and similar applications. The 106mm hub bore fits these 6-lug platforms across both pattern groups. At 24 inches in diameter, this is a show-presence wheel that commands attention on any build it lands on.\u003c\/p\u003e\u003cp\u003eSplit Eight-Spoke Mesh Design\u003c\/p\u003e\u003cp\u003eThe AF14 Lex runs a split eight-spoke mesh layout with a deep concave profile that gives the face real visual depth. Each of the eight split spokes fans outward from the hub in a tight mesh arrangement, and the concave dish amplifies the three-dimensional effect when viewed head-on. Lug hardware sits exposed around the hub bore, visible on the face and adding a hardware-forward detail to the overall look. The polished finish covers the entire wheel in a bright, mirror-like surface that reflects light cleanly across the spokes and concave dish. A center cap is included.\u003c\/p\u003e\u003cp\u003eOne-Piece Forged Construction\u003c\/p\u003e\u003cp\u003eAxe Forged builds the AF14 Lex as a one-piece forged wheel, pressing solid aluminum billet under extreme force to refine the grain structure throughout the face, spokes, and barrel. That process produces a dense, strong wheel that carries the deep concave geometry and wide 14-inch barrel without adding unnecessary mass. At 60 lbs, the AF14 Lex delivers the structural integrity a 24-inch forged wheel demands. The 2,600-lb load rating supports full-size truck and SUV applications across both bolt-pattern groups.\u003c\/p\u003e\u003cp\u003eOffset and Stance at -76mm\u003c\/p\u003e\u003cp\u003eAt -76mm, the mounting surface sits well rearward of the wheel's centerline, pushing the face and barrel outward for an aggressive, wide stance. On a 14-inch-wide wheel at this diameter, that offset places the wheel face noticeably outside the fender plane on lifted truck builds, creating the outboard poke that defines the look. Backspacing measures 4.51 inches. This combination of width, diameter, and offset is built for trucks running substantial lift kits where clearance supports the aggressive outboard positioning this size calls for.\u003c\/p\u003e\u003cp\u003eAdditional Configurations Available\u003c\/p\u003e\u003cp\u003eThe AF14 Lex is offered across additional sizes, widths, and finishes beyond this polished 24x14 setup, with both 6-lug bolt patterns available throughout the lineup to cover a broad range of full-size truck and SUV builds.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x135 \/ 6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-76 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.51\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePolished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eForged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e60 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Axe Offroad","offers":[{"title":"Default Title","offer_id":68712993521945,"sku":"241412H-76AF14FP","price":1400.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/af14lex_polished_6lug_white__77947.jpg?v=1794772215"},{"product_id":"22x8-25-polished-wheel-af6-dually-8x200-228200146168af6fp-f","title":"AF6 Dually Polished | 22x8.25 | 8x200 0mm Offset | 228200146168AF6FP*F","description":"\u003cp\u003eBuilt for the 8x200 Dually Platform\u003c\/p\u003e\u003cp\u003eFord F-350 Super Duty owners (2005-2026) and Ram 3500 owners (2017-2026) running dually setups have a short list of wheels engineered for the 8x200 bolt pattern, and the Axe Forged AF6 Dually is one of the most refined options on it. At 22x8.25 inches with a 0mm offset, the mounting surface sits exactly at the wheel's centerline, keeping the wheel positioned symmetrically relative to the hub. The 154.20mm hub bore fits both platforms, and the 3,500-lb load rating supports the payload and towing demands these trucks are built to carry.\u003c\/p\u003e\u003cp\u003eSplit-Spoke Mesh Design, Polished Finish\u003c\/p\u003e\u003cp\u003eThe AF6 Dually carries a split eight-spoke mesh design across its face, with each pair of spokes forming a tight, interlocking pattern that gives the wheel visual density without closing off the face. Lug hardware sits exposed around the hub bore, visible on the face and adding a purposeful, hardware-forward look that suits the working character of a Super Duty or Ram 3500 build. The full polished finish covers the face in a bright, mirror-like surface that holds its presence against the scale of a dually fender. A center cap is included.\u003c\/p\u003e\u003cp\u003eOne-Piece Forged Construction\u003c\/p\u003e\u003cp\u003eAxe Forged builds the AF6 Dually as a one-piece forged wheel, pressing solid aluminum billet under extreme force to refine the grain structure throughout the disc and barrel. That process produces a wheel with the density and structural integrity to handle the sustained loads a dually platform puts through its rear axle. At 60 lbs, the weight reflects the combination of a 22-inch diameter, 8.25-inch width, and the material volume that one-piece forging at this scale requires. For a wheel carrying a 3,500-lb load rating on a heavy-duty dually, that construction is the right foundation.\u003c\/p\u003e\u003cp\u003eFitment Details for Dually Builds\u003c\/p\u003e\u003cp\u003eThe 8x200 bolt pattern is specific to Ford's heavy-duty dually lineup and the Ram 3500 dually, making this a purpose-built wheel for those two platforms. The 0mm offset and 4.62 inches of backspacing position the wheel symmetrically on the hub, which is the standard geometry for dually rear positions where dual-wheel spacing is determined by the axle flange rather than offset alone. This wheel fits the Ford F-350 Super Duty (2005-2026) and Ram 3500 (2017-2026) dually applications.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e8.25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e8x200\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.62\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e154.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePolished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eForged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e3500 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e60 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Axe Offroad","offers":[{"title":"Default Title","offer_id":68712993915161,"sku":"228200146168AF6FP*F","price":1074.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/af6dually_polished_front_white__17948.jpg?v=1794772217"},{"product_id":"24x8-25-polished-wheel-af6-dually-8x200-248200146168af6fp-f","title":"AF6 Dually Polished | 24x8.25 | 8x200 0mm Offset | 248200146168AF6FP*F","description":"\u003cp\u003eBuilt for the 8x200 Dually Platform\u003c\/p\u003e\u003cp\u003eFord F-350 Super Duty owners (2005-2026) and Ram 3500 drivers (2017-2026) running the 8x200 bolt pattern have a short list of wheel options that actually fit the dually hub. The Axe Forged AF6 Dually is purpose-built for that platform, sized at 24x8.25 with a 0mm offset and a 142mm hub bore that fits both applications. The 3,500-lb load rating supports the payload and towing demands these trucks are built around, and the 4.62-inch backspacing positions the mounting surface at the wheel's centerline for a balanced, symmetrical stance front and rear.\u003c\/p\u003e\u003cp\u003eSplit-Mesh Design with Polished Finish\u003c\/p\u003e\u003cp\u003eThe AF6 Dually carries a split eight-spoke mesh design across the face, with each spoke dividing into a tight, interlocking mesh pattern that gives the wheel visual density without closing off the face entirely. Lug hardware sits exposed around the hub bore, visible on the face and adding a purposeful, hardware-forward look that suits the scale of a heavy-duty dually build. The full polished finish covers the entire wheel in a bright, mirror-like surface that holds its character on a truck this size. At 24 inches in diameter, the AF6 Dually has the presence to match a Super Duty or Ram 3500's proportions, and the polished surface amplifies that scale in a way that suits show-quality builds and clean street trucks alike.\u003c\/p\u003e\u003cp\u003eOne-Piece Forged Construction\u003c\/p\u003e\u003cp\u003eAxe Forged builds the AF6 Dually as a one-piece forged wheel, pressing solid aluminum billet under extreme force to refine the grain structure throughout the face, spokes, and barrel. That process produces a dense, strong wheel capable of carrying the 3,500-lb load rating this platform demands. For a 24-inch dually wheel that needs to handle real-world HD payloads, forged construction delivers the structural integrity to back up the finish. At 60 lbs, the weight reflects the combination of a large-diameter forged barrel and the material needed to meet the load rating for Super Duty and Ram 3500 applications. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eFitment for F-350 Super Duty and Ram 3500\u003c\/p\u003e\u003cp\u003eThe 8x200 bolt pattern is specific to Ford's F-450\/F-550 Super Duty dually lineup and the Ram 3500 dually (2012 forward), making it one of the more platform-exclusive patterns in the heavy-duty segment. This wheel fits the Ford F-350 Super Duty (2005-2026) and Ram 3500 (2017-2026), covering the two primary platforms that run this bolt pattern in the dually configuration. The 142mm hub bore fits both applications. With only two verified platforms in the 8x200 universe, fitment is straightforward: if your truck is one of these, the AF6 Dually is sized and rated for it.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e8.25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e8x200\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.62\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e142 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePolished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eForged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e3500 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e60 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Axe Offroad","offers":[{"title":"Default Title","offer_id":68712994275609,"sku":"248200146168AF6FP*F","price":1380.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/af6dually_polished_front_white__87766.jpg?v=1794772218"},{"product_id":"22x12-black-milled-wheel-ax1-0-5x5-5x5-5-44-221210h-44ax1bm","title":"AX1.0 Black Milled | 22x12 | 5x5\/5x5.5 -44mm Offset | 221210H-44AX1BM","description":"\u003cp\u003eWide Stance on Dual 5-Lug Platforms\u003c\/p\u003e\u003cp\u003eThe Axe Offroad AX1.0 arrives in a 22x12 footprint with a -44mm offset, which shifts the mounting surface well rearward of the wheel's centerline and pushes the face outboard for a pronounced, aggressive stance. At 12 inches wide with a -44mm offset, this combination meets the threshold for wider-track framing: the wheel sits noticeably outboard relative to the hub, giving your build the poke and presence that defines an intentional fitment. Backspacing measures 4.77 inches. The 87.10mm hub bore fits the 5x127 (5x5) and 5x139.7 (5x5.5) platforms this wheel is drilled for.\u003c\/p\u003e\u003cp\u003eRotary Forged Construction\u003c\/p\u003e\u003cp\u003eThe AX1.0 is a one-piece rotary forged wheel. In this process, the cast aluminum barrel is heated and then spun under pressure, which refines and densifies the grain structure of the aluminum for a stronger barrel than low-pressure casting alone produces. That spinning step is what separates rotary forging from standard casting, and it's why the barrel can handle the side-load and impact demands of truck use at this size. At 45 lbs, the wheel comes in close to typical for a rotary forged 22-inch truck wheel in this width class.\u003c\/p\u003e\u003cp\u003eSplit Nine-Spoke Design with Milled Edges\u003c\/p\u003e\u003cp\u003eThe AX1.0 runs a split nine-spoke layout across a gloss black face, with the spoke edges milled to a brighter contrast finish. The milling removes material along the spoke edges to expose the raw aluminum beneath, creating a two-tone effect against the gloss black surfaces without adding a separate paint layer. Lug hardware sits exposed on the face around the hub bore, visible in a circle at the center of the wheel where it mounts to the vehicle. Rivets accent the face as well. A center cap is included, which covers the hub area when the lugs are not in use for display. The wheel also features a visible outer lip that adds depth to the profile on wider builds.\u003c\/p\u003e\u003cp\u003eFitment for 5x127 and 5x139.7 Platforms\u003c\/p\u003e\u003cp\u003eThis wheel is dual-drilled for both the 5x127 (5x5) and 5x139.7 (5x5.5) bolt patterns, opening fitment across two distinct platform groups. The 5x127 pattern covers Jeep Wrangler (2007-2026), Jeep Grand Cherokee (1999-2026), and older GM half-ton platforms including the Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999). The 5x139.7 pattern extends fitment to older Ford F-150, classic Bronco, Jeep Wagoneer, Cherokee XJ, and similar classic 5-lug truck and SUV platforms. In total, 32 verified fitment applications are confirmed across both bolt-pattern groups. The AX1.0 is also offered in additional sizes, widths, and finish options to suit a range of builds across the lineup.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127 \/ 5x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-44 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.77\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack Milled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eRotary Forged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e45 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Axe Offroad","offers":[{"title":"Default Title","offer_id":68712994668825,"sku":"221210H-44AX1BM","price":700.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/ax1.0_blackmilled_white__57484.jpg?v=1794772219"},{"product_id":"24x12-black-milled-wheel-ax1-0-5x5-5x5-5-44-241210h-44ax1bm","title":"AX1.0 Black Milled | 24x12 | 5x5\/5x5.5 -44mm Offset | 241210H-44AX1BM","description":"\u003cp\u003eWide Stance on a Dual-Drilled 5-Lug Platform\u003c\/p\u003e\u003cp\u003eThe Axe Offroad AX1.0 is a 24-inch, 12-inch-wide rotary forged wheel finished in Gloss Black with milled spoke edges. The -44mm offset places the mounting surface well rearward of the wheel's centerline, pushing the face outboard for an aggressive stance that commands attention. At 24 inches in diameter with a 12-inch width and -44mm offset, this is a wheel built for builds that want presence. Backspacing measures 4.77 inches. The 87.1mm hub bore fits both 5x127 (5x5) and 5x139.7 (5x5.5) platforms, and the dual-drilled pattern opens this wheel to a wide range of classic and modern 5-lug trucks and SUVs.\u003c\/p\u003e\u003cp\u003eRotary Forged Construction\u003c\/p\u003e\u003cp\u003eThe AX1.0 is built as a one-piece rotary forged wheel. In this process, the cast aluminum barrel is heated and then spun under pressure, which refines and densifies the grain structure of the aluminum for a stronger, more resilient barrel than low-pressure casting alone produces. The result is a wheel that handles the demands of truck use at this size and width. At 51 lbs, the AX1.0 comes in right at the typical weight for a rotary forged 24-inch truck wheel in this width class.\u003c\/p\u003e\u003cp\u003eSplit Nine-Spoke Design with Exposed Lugs\u003c\/p\u003e\u003cp\u003eThe AX1.0 runs a split nine-spoke face with milled edges along each spoke, creating a two-tone contrast between the gloss black surfaces and the bright milled lines. Lug hardware sits exposed in a circle around the hub bore at the center of the face, visible on the finished wheel. Rivets accent the design, adding a layered detail to the overall look. The wheel also features a lip, and a center cap is included.\u003c\/p\u003e\u003cp\u003eFitment for 5x127 and 5x139.7 Platforms\u003c\/p\u003e\u003cp\u003eThe dual-drilled pattern covers both 5x127 (5x5) and 5x139.7 (5x5.5) bolt patterns. Verified fits include the Jeep Wrangler (2007-2026), Jeep Grand Cherokee (1999-2026), Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), among 10 additional verified platforms. The 2,600-lb load rating is rated for full-size truck and SUV applications. The AX1.0 is also offered in additional sizes, widths, and finishes across the lineup for builds with different fitment needs.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127 \/ 5x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-44 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.77\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack Milled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eRotary Forged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e51 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Axe Offroad","offers":[{"title":"Default Title","offer_id":68712995062041,"sku":"241210H-44AX1BM","price":840.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/ax1.0_blackmilled_white__32720.jpg?v=1794772220"},{"product_id":"22x14-black-milled-wheel-ax1-0-8x180-76-22148180-76ax1bm","title":"AX1.0 Black Milled | 22x14 | 8x180 -76mm Offset | 22148180-76AX1BM","description":"\u003cp\u003eBuilt for GM Heavy-Duty Platforms\u003c\/p\u003e\u003cp\u003eThe Chevrolet Silverado 2500 HD and 3500 HD, GMC Sierra 2500 HD and 3500 HD, and GMC Sierra 3500 Classic (2007) all run the 8x180 bolt pattern, and the Axe Offroad AX1.0 is drilled specifically for that fitment. The 125.20mm hub bore fits these GM HD platforms, and the 3,200-lb load rating is sized for the payload and towing demands that come with heavy-duty truck ownership. One additional verified platform rounds out the fitment universe beyond the five named here.\u003c\/p\u003e\u003cp\u003eAggressive Proportions, Intentional Stance\u003c\/p\u003e\u003cp\u003eAt 22 inches in diameter and 14 inches wide with a -76mm offset, this wheel pushes the mounting surface well rearward of centerline, positioning the face and barrel outboard for a wide, planted stance that makes a clear visual statement on lifted GM HD builds. The 4.51 inches of backspacing and 10.49 inches of frontspacing reflect just how far this wheel reaches outward. This is an assertive combination built for trucks running a lift kit, where the added clearance lets the full width of the barrel sit properly within the fender arch.\u003c\/p\u003e\u003cp\u003eSplit Nine-Spoke Design with Milled Edges\u003c\/p\u003e\u003cp\u003eThe AX1.0 runs a split nine-spoke layout with a gloss black finish and milled spoke edges that cut a bright contrast line along each spoke. The milled edges catch the geometry of the design and give the face a sharp, two-tone look without adding visual clutter. Rivets accent the wheel face, and the exposed lug hardware sits in a circle around the hub bore, visible on the face as part of the overall design. A center cap is included. The outer lip adds depth to the profile, reinforcing the wide-barrel presence this size delivers.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eThe AX1.0 is cast in one-piece alloy, a construction that supports the complex spoke geometry and deep barrel profile this design demands. Cast alloy molds accommodate the split-spoke undercuts and contoured lip in a single continuous shape, keeping the structural integrity of the design intact across the full load cycle. At 45 lbs, this wheel comes in near the typical weight for a 22-inch alloy truck wheel in this class. Axe Offroad's UK-rooted design sensibility comes through in the aggressive spoke geometry and the clean milled detailing, applied here to a wheel built specifically for the North American HD truck market.\u003c\/p\u003e\u003cp\u003eFitment Details\u003c\/p\u003e\u003cp\u003eThe AX1.0 is also offered in additional sizes, widths, finishes, and bolt patterns across the lineup, so there are options if this specific combination does not match your build.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e8x180\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-76 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.51\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e125.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack Milled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e3200 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e45 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Axe Offroad","offers":[{"title":"Default Title","offer_id":68712995520793,"sku":"22148180-76AX1BM","price":700.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/ax1.0_blackmilled_white__55129.jpg?v=1794772221"},{"product_id":"22x12-silver-wheel-ax1-1-5x5-5x5-5-44-221210h-44ax1sm","title":"AX1.1 Silver | 22x12 | 5x5\/5x5.5 -44mm Offset | 221210H-44AX1SM","description":"\u003cp\u003eWide Stance on a Dual-Drilled 5-Lug Platform\u003c\/p\u003e\u003cp\u003eThe Axe Offroad AX1.1 arrives in a 22x12 footprint with a -44mm offset, meaning the mounting surface sits well rearward of the wheel's centerline and pushes the face outboard from the hub. At 12 inches wide with a -44mm offset, this is an aggressive combination that commits to a wider track and pronounced outboard positioning. The dual-drilled pattern covers both 5x127 (5x5) and 5x139.7 (5x5.5), opening fitment to Jeep Wrangler JK and Grand Cherokee platforms, Ram 1500 (pre-2019), older Chevy half-ton trucks, classic Ford F-150 and Bronco applications, and similar 5-lug truck and SUV platforms, with 32 verified fits in total. The 87.10mm hub bore fits those 5x127 and 5x139.7 platforms, and backspacing comes in at 4.77 inches.\u003c\/p\u003e\u003cp\u003eSplit Nine-Spoke Face with Brushed Accents\u003c\/p\u003e\u003cp\u003eThe AX1.1 runs a split nine-spoke layout with a silver finish and brushed spoke accents that add a textural contrast across the face. The silver areas of the face carry a clean base tone while the brushed treatment on the spokes gives each of the nine split spokes a directional, metallic character. Lug hardware sits exposed and visible around the hub bore at the center of the face, and rivets are present on the wheel as well, adding further visual detail. A center cap is included with this wheel, covering the hub area when the exposed lug look is not the goal.\u003c\/p\u003e\u003cp\u003eRotary Forged One-Piece Construction\u003c\/p\u003e\u003cp\u003eThe AX1.1 is built as a one-piece rotary forged wheel. In this process, the cast aluminum barrel is heated and then spun under pressure, which refines and densifies the grain structure of the aluminum through that spinning step. That's what separates rotary forging from standard low-pressure casting: the spin compresses and aligns the material, producing a stronger barrel without the weight penalty of a fully forged wheel. At 45 lbs, this 22-inch, 12-inch-wide wheel comes in close to typical for its class. The 2,600-lb load rating supports truck and SUV applications across the verified fitment range.\u003c\/p\u003e\u003cp\u003eFitment for 5x127 and 5x139.7 Platforms\u003c\/p\u003e\u003cp\u003eVerified fits include the Jeep Wrangler (2007-2026), Jeep Grand Cherokee (1999-2026), Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), among 10 additional verified platforms. The dual-drilled pattern means a single wheel covers both the 5x127 Jeep and Ram universe and the 5x139.7 classic Ford and Dodge truck universe. The AX1.1 is also offered in additional sizes, widths, and finishes across the lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127 \/ 5x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-44 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.77\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSilver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eRotary Forged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e45 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Axe Offroad","offers":[{"title":"Default Title","offer_id":68712995848473,"sku":"221210H-44AX1SM","price":740.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/ax1.1_silver_white__59948.jpg?v=1794772223"},{"product_id":"24x12-silver-wheel-ax1-1-5x5-5x5-5-44-241210h-44ax1sm","title":"AX1.1 Silver | 24x12 | 5x5\/5x5.5 -44mm Offset | 241210H-44AX1SM","description":"\u003cp\u003eSplit Nine-Spoke Silver on a Dual-Drilled Platform\u003c\/p\u003e\u003cp\u003eThe Axe Offroad AX1.1 arrives in a 24x12 footprint with a silver finish and brushed spoke accents that give the face a two-tone contrast without going chrome. Nine split spokes radiate from the hub area, each carrying the brushed accent treatment against the silver background for a look that suits aggressive truck builds without leaning into a blacked-out aesthetic. Rivets sit on the wheel, adding a hardware-forward detail consistent with Axe's off-road design sensibility. A center cap is included, covering the lug hardware at the hub.\u003c\/p\u003e\u003cp\u003eRotary Forged Construction\u003c\/p\u003e\u003cp\u003eThe AX1.1 is a one-piece rotary forged wheel. In this process, the cast aluminum barrel is heated and spun under pressure, which refines and densifies the grain structure of the aluminum for a stronger barrel than low-pressure casting alone produces. The spinning step is what separates rotary forging from standard casting, and it's why the barrel can handle the lateral and impact loads that come with larger-diameter truck fitment. At 51 lbs, this 24-inch, 12-inch-wide wheel sits right in line with what the class typically weighs.\u003c\/p\u003e\u003cp\u003eOffset and Stance at -44mm\u003c\/p\u003e\u003cp\u003eA -44mm offset places the mounting surface well rearward of the wheel's centerline, pushing the face outboard from the hub. On a 12-inch-wide barrel, that combination qualifies as aggressive fitment: the wheel will sit with noticeable poke relative to the fender line. Backspacing measures 4.77 inches. This is a wheel sized and offset for builds running lift kits where fender clearance has been opened up to accommodate the wider track.\u003c\/p\u003e\u003cp\u003eFitment for 5x127 (5x5) and 5x139.7 (5x5.5) Platforms\u003c\/p\u003e\u003cp\u003eThe AX1.1 is dual-drilled, covering both the 5x127 (5x5) and 5x139.7 (5x5.5) bolt patterns in a single wheel. The 5x127 pattern fits Jeep Wrangler (2007-2026), Jeep Grand Cherokee (1999-2026), and older Chevy half-ton platforms including the Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999). The 5x139.7 pattern extends fitment to older Ford F-150 and Bronco applications, pre-2002 Dodge Ram 1500, Jeep Wagoneer and Cherokee XJ, and similar classic 5-lug truck platforms. The 87.1mm hub bore fits both bolt-pattern groups. Across both patterns, 32 verified fitment applications are confirmed, with 10 additional verified platforms beyond those named here. The AX1.1 is also offered in additional sizes, widths, and finishes across the lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127 \/ 5x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-44 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.77\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSilver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eRotary Forged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e51 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Axe Offroad","offers":[{"title":"Default Title","offer_id":68712996208921,"sku":"241210H-44AX1SM","price":900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/ax1.1_silver_white__17151.jpg?v=1794772224"},{"product_id":"24x12-red-wheel-ax1-2-5x5-5x5-5-44-241210h-44ax1rm","title":"AX1.2 Red | 24x12 | 5x5\/5x5.5 -44mm Offset | 241210H-44AX1RM","description":"\u003cp\u003eBold Candy Red Finish with Milled Spoke Edges\u003c\/p\u003e\u003cp\u003eThe Axe Offroad AX1.2 arrives in a Candy Red finish with milled spoke edges that cut a bright contrast against the deep red surfaces. The milled edges trace the length of each spoke, giving the face a two-tone character without adding a separate paint layer. Rivets accent the wheel face, adding a detail that suits the aggressive scale of a 24-inch diameter. At this size, the AX1.2 is built to draw attention, and the candy red finish makes that intent unmistakable. A center cap is included.\u003c\/p\u003e\u003cp\u003eSplit Nine-Spoke Face and Exposed Lug Hardware\u003c\/p\u003e\u003cp\u003eThe AX1.2 runs a split nine-spoke face. Each spoke divides as it extends outward from the hub, giving the face more visual complexity than a standard single-spoke layout. Lug hardware sits exposed in a circle around the hub bore, visible on the face rather than hidden behind a cap. The combination of the split spoke geometry, milled edges, rivets, and exposed lugs gives the wheel a layered look that holds up at the scale a 24-inch diameter demands.\u003c\/p\u003e\u003cp\u003eDimensions and Offset\u003c\/p\u003e\u003cp\u003eThis wheel measures 24 inches in diameter and 12 inches wide, with a -44mm offset. At -44mm, the mounting surface sits well rearward of the wheel's centerline, positioning the face outboard from the hub. On a 12-inch-wide barrel, that offset produces a notably aggressive outboard stance. The 87.10mm hub bore fits the 5x127 and 5x139.7 bolt-pattern platforms this wheel is drilled for. Backspacing is 4.77 inches. The load rating is 2,600 lbs. At 51 lbs, the AX1.2 comes in right at the typical weight for a one-piece alloy wheel at this diameter and width.\u003c\/p\u003e\u003cp\u003eDual-Drilled for 5x127 and 5x139.7 Platforms\u003c\/p\u003e\u003cp\u003eThe AX1.2 is dual-drilled for both 5x127 (5x5) and 5x139.7 (5x5.5) bolt patterns, opening fitment across two distinct platform groups. The 5x127 pattern covers Jeep Wrangler JK and JL generations (2007-2026), Jeep Grand Cherokee (1999-2026), and pre-2019 Ram 1500 applications, among others. The 5x139.7 pattern fits older Ford F-150 and Bronco platforms, pre-2002 Dodge Ram 1500, Jeep Wagoneer and Cherokee XJ, and similar classic five-lug truck applications. Verified fitment also includes the Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), with 10 additional verified platforms beyond those listed. Total verified fitment spans 32 applications across both bolt-pattern groups.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eThe AX1.2 is a one-piece alloy wheel. The entire structure, from hub to barrel, is formed as a single continuous casting with no welded joints or assembled sections. One-piece construction keeps the wheel's structural integrity consistent across the face and barrel without seam lines that can flex under repeated load. The AX1.2 is also offered in additional sizes, widths, and finishes across the lineup for builds with different fitment targets.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127 \/ 5x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-44 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.77\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eRed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e51 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Axe Offroad","offers":[{"title":"Default Title","offer_id":68712996634905,"sku":"241210H-44AX1RM","price":720.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/ax1.2_red_white__19786.jpg?v=1794772225"},{"product_id":"24x12-white-wheel-ax1-3-5x5-5x5-5-44-241210h-44ax1wm","title":"AX1.3 White | 24x12 | 5x5\/5x5.5 -44mm Offset | 241210H-44AX1WM","description":"\u003cp\u003eDual-Drilled for Jeep and Classic Truck Platforms\u003c\/p\u003e\u003cp\u003eJeep Wrangler and Grand Cherokee owners running the 5x127 (5x5) bolt pattern get a wheel sized for lifted builds, and the AX1.3 covers the 5x139.7 (5x5.5) pattern as well, opening fitment to classic Ford F-150, Dodge Ram 1500, Jeep Cherokee XJ, and similar five-lug truck platforms. Verified fitment spans 32 applications, including the Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), among 10 additional verified platforms beyond the primary list. The 87.1mm hub bore fits these 5x127 and 5x139.7 platforms, and the 2,600-lb load rating supports the demands of full-size truck and SUV use.\u003c\/p\u003e\u003cp\u003eSplit Nine-Spoke Design with Milled Edges\u003c\/p\u003e\u003cp\u003eThe AX1.3 runs a split nine-spoke layout with milled spoke edges that cut a bright contrast against the gloss white finish. Each spoke pair fans outward from the hub, giving the face an open, layered look with visual depth that suits the scale of a 24-inch wheel. Rivets accent the face, and the outer lip adds further dimension to the profile. Lug hardware sits exposed around the hub bore, visible on the face as part of the design rather than hidden behind a cap. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Cast Alloy Construction\u003c\/p\u003e\u003cp\u003eAxe Offroad's UK design sensibility shows in the AX1.3's face geometry: the split-spoke layout and milled detail demand a construction that can carry complex contours cleanly, and one-piece cast alloy delivers exactly that. Cast molds support the deep spoke profiles, undercuts, and contoured geometry that define this wheel's character, holding the design's shape through every load cycle. At 51 lbs, the AX1.3 comes in right at the typical weight for a 24-inch alloy wheel of this width, consistent with what cast construction at this scale produces.\u003c\/p\u003e\u003cp\u003eFitment at -44mm Offset\u003c\/p\u003e\u003cp\u003eAt -44mm, the mounting surface sits well rearward of the wheel's centerline, pushing the face outward for an aggressive, wide stance. On a 12-inch-wide barrel, that combination qualifies as a genuinely outboard wheel position: the face and spokes sit prominently outside the fender plane on lifted builds, which is exactly the look this size and offset are built for. Backspacing measures 4.77 inches. The AX1.3 is also offered in additional sizes, widths, and finishes across the lineup for builds that need a different fit.\u003c\/p\u003e\u003cp\u003eGloss White Finish with Milled Spoke Edges\u003c\/p\u003e\u003cp\u003eThe gloss white finish covers the face, spokes, and barrel, while the milled spoke edges strip back the paint to expose the raw aluminum beneath, creating a bright two-tone contrast that holds its character in any light. White is a bold choice at 24 inches, and the milled detail keeps the look sharp rather than flat. The finish suits builds where the wheel is meant to be noticed, and the gloss surface stays clean with standard washing.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127 \/ 5x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-44 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.77\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e51 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Axe Offroad","offers":[{"title":"Default Title","offer_id":68712997060889,"sku":"241210H-44AX1WM","price":1000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/ax1.3_white_white__84245.jpg?v=1794772226"},{"product_id":"22x12-brushed-wheel-ax1-4-5x5-5x5-5-44-221210h-44ax1kb","title":"AX1.4 Brushed | 22x12 | 5x5\/5x5.5 -44mm Offset | 221210H-44AX1KB","description":"\u003cp\u003eWide Stance on Dual 5-Lug Platforms\u003c\/p\u003e\u003cp\u003eThe Axe Offroad AX1.4 arrives in a 22x12 footprint with a -44mm offset, which shifts the mounting surface well rearward of the wheel's centerline and pushes the face outboard for an aggressive, wide-track stance. At 12 inches wide with a -44mm offset, this combination qualifies as genuinely aggressive fitment, and the 4.77 inches of backspacing reflects that outboard positioning. The 87.10mm hub bore fits both 5x127 (5x5) and 5x139.7 (5x5.5) platforms, making this a dual-drilled wheel that covers a broad range of classic and current 5-lug truck and SUV applications.\u003c\/p\u003e\u003cp\u003eSplit Nine-Spoke Design with Brushed Carbon Finish\u003c\/p\u003e\u003cp\u003eThe AX1.4 runs a split nine-spoke layout, with each pair of spokes branching from the hub area and fanning outward across the face. The spoke edges are milled to a brighter contrast against the brushed carbon background, giving the face a two-tone depth that shifts with the angle of light. Rivets sit on the wheel, adding a hardware-forward detail consistent with Axe Offroad's off-road-influenced design language. The exposed lug hardware is visible around the hub bore at the center of the face, keeping the mounting hardware as part of the visual rather than hiding it behind a cap. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eThis is a one-piece alloy wheel, formed as a single continuous unit rather than assembled from separate barrel and face sections. That construction eliminates joint lines and keeps the structural integrity consistent across the full wheel. At 45 lbs, the AX1.4 comes in close to the typical weight for a 22-inch alloy truck wheel in this width class. The 2,600-lb load rating is sized for truck and SUV applications across the verified fitment range.\u003c\/p\u003e\u003cp\u003eFitment for 5x127 and 5x139.7 Platforms\u003c\/p\u003e\u003cp\u003eVerified fitment includes the Jeep Wrangler (2007-2026), Jeep Grand Cherokee (1999-2026), Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), with 10 additional verified platforms beyond those five. The 5x127 (5x5) pattern covers Jeep JK and JL Wrangler, Grand Cherokee, and Ram 1500 applications, while the 5x139.7 (5x5.5) pattern extends fitment to older Ford F-150, classic Bronco, and similar legacy 5-lug truck platforms. The AX1.4 is also offered in additional sizes and finishes across the lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127 \/ 5x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-44 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.77\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBrushed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e45 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Axe Offroad","offers":[{"title":"Default Title","offer_id":68712997585177,"sku":"221210H-44AX1KB","price":740.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/ax1.4_brushed_white__23641.jpg?v=1794772227"},{"product_id":"24x12-brushed-wheel-ax1-4-5x5-5x5-5-44-241210h-44ax1kb","title":"AX1.4 Brushed | 24x12 | 5x5\/5x5.5 -44mm Offset | 241210H-44AX1KB","description":"\u003cp\u003eDual-Drilled for Jeep and Classic Truck Platforms\u003c\/p\u003e\u003cp\u003eJeep Wrangler owners (2007-2026) and Grand Cherokee builds (1999-2026) running the 5x127 (5x5) bolt pattern get a 24-inch wheel with serious visual presence and a -44mm offset that pushes the mounting surface rearward of centerline for an outboard stance. The same wheel also covers the 5x139.7 (5x5.5) pattern, opening fitment to classic platforms like older Ford F-150, Dodge Ram 1500 (pre-2002), and Jeep Cherokee XJ, among 32 total verified applications. At 24 inches in diameter, this is a show-forward size that commands attention on lifted builds. The 87.1mm hub bore fits both bolt-pattern groups, and the 2,600-lb load rating supports full-size truck and SUV payloads.\u003c\/p\u003e\u003cp\u003eSplit Nine-Spoke Design with Milled Edges\u003c\/p\u003e\u003cp\u003eThe AX1.4 runs a split nine-spoke layout across a 12-inch-wide barrel. Each of the nine split spokes carries a milled edge treatment that cuts a brighter contrast line against the Brushed Carbon finish, giving the face a layered, textured look without adding visual clutter. Rivets accent the design, and the exposed lug hardware sits in a circle around the hub bore at the center of the face, adding to the industrial character of the build. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eAxe Offroad's UK-rooted design sensibility shows in how the AX1.4 is built: one-piece cast alloy carries the full spoke geometry, milled detail, and outer lip in a single continuous structure. Cast construction handles the complex split-spoke profile and undercut geometry that the AX1.4's face demands, and the result is a wheel that holds its shape and finish through the load cycles a lifted Jeep or full-size truck puts it through. At 51 lbs, the weight is consistent with what a 24x12 alloy wheel of this construction typically runs.\u003c\/p\u003e\u003cp\u003eFitment for 5x127 and 5x139.7 Platforms\u003c\/p\u003e\u003cp\u003eJeep Wrangler JK and JL owners get a -44mm offset that places the mounting surface well behind the wheel's centerline, pushing the face outward for a wide, planted stance on lifted setups. The same geometry applies across the 5x139.7 group: Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), GMC Yukon (1992-1999), and similar classic 5-lug truck platforms. With 4.77 inches of backspacing, the wheel is sized for builds running lift kits that open up clearance for this diameter and width. The AX1.4 is also offered in additional sizes, widths, and finishes across the lineup for builds with different fitment targets.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127 \/ 5x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-44 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.77\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBrushed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e51 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Axe Offroad","offers":[{"title":"Default Title","offer_id":68712997978393,"sku":"241210H-44AX1KB","price":900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/ax1.4_brushed_white__31659.jpg?v=1794772229"},{"product_id":"20x12-black-milled-wheel-ax2-0-5x5-5x5-5-44-201210h-44ax2bm","title":"AX2.0 Black Milled | 20x12 | 5x5\/5x5.5 -44mm Offset | 201210H-44AX2BM","description":"\u003cp\u003eWide Stance on Dual 5-Lug Platforms\u003c\/p\u003e\u003cp\u003eThe Axe Offroad AX2.0 is a 20x12 rotary forged wheel in a Gloss Black with Milled Spoke Windows finish, drilled for both 5x127 (5x5) and 5x139.7 (5x5.5) bolt patterns. That dual-drilled setup opens fitment across two distinct 5-lug platform families: the 5x127 pattern covers Jeep Wrangler JK through current generation, Jeep Grand Cherokee, and Ram 1500 pre-2019 applications, while 5x139.7 reaches older Ford F-150, Jeep Cherokee XJ, Jeep Wagoneer, and similar classic 5-lug truck platforms, among 32 verified fits in total. The 87.10mm hub bore fits both bolt-pattern groups. At -44mm offset, the mounting surface sits well rearward of the wheel's centerline, pushing the face outboard for a pronounced wide-track stance. Combined with the 12-inch width, this is an aggressive fitment that commits to poke and presence. Backspacing measures 4.77 inches.\u003c\/p\u003e\u003cp\u003eRotary Forged Construction\u003c\/p\u003e\u003cp\u003eThe AX2.0 is built as a one-piece rotary forged wheel. In this process, the cast aluminum barrel is heated and then spun under pressure, which refines and densifies the grain structure of the aluminum through that spinning step. The result is a barrel that is stronger than what low-pressure casting alone produces, without the weight penalty of a fully forged wheel. At 37 lbs, this 20-inch, 12-inch-wide wheel comes in below the typical weight for rotary forged 20-inch truck wheels in this width class.\u003c\/p\u003e\u003cp\u003eSplit 8-Spoke Mesh Design with Milled Windows\u003c\/p\u003e\u003cp\u003eThe AX2.0 runs a split 8-spoke mesh design with milled spoke windows cut into each spoke. The gloss black finish covers the face and barrel, and the milling opens up bright aluminum contrast within the spoke openings, giving the wheel a two-tone look without a separate machined or painted layer. Rivets accent the face, and the lug hardware is exposed and visible around the hub area, sitting in a circle at the center of the face where the wheel mounts to the vehicle. A center cap is included.\u003c\/p\u003e\u003cp\u003eFitment Details\u003c\/p\u003e\u003cp\u003eVerified fitment includes Jeep Wrangler (2007-2026), Jeep Grand Cherokee (1999-2026), Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), with 10 additional verified platforms across both bolt-pattern groups. The 2,600-lb load rating is sized for truck and SUV applications. The AX2.0 is also offered in additional sizes, widths, and finish options to suit different build targets across the same platform families.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127 \/ 5x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-44 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.77\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack Milled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eRotary Forged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e37 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Axe Offroad","offers":[{"title":"Default Title","offer_id":68712998273305,"sku":"201210H-44AX2BM","price":575.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/ax2.0_blackmilled_white__50605.jpg?v=1794772230"},{"product_id":"22x12-black-milled-wheel-ax2-0-5x5-5x5-5-44-221210h-44ax2bm","title":"AX2.0 Black Milled | 22x12 | 5x5\/5x5.5 -44mm Offset | 221210H-44AX2BM","description":"\u003cp\u003eWide Stance on Dual 5-Lug Platforms\u003c\/p\u003e\u003cp\u003eThe Axe Offroad AX2.0 is a 22x12 one-piece rotary forged wheel finished in Gloss Black with milled spoke windows. At -44mm offset, the mounting surface sits well rearward of the wheel's centerline, pushing the face outboard for a pronounced wide stance. Combined with the 12-inch barrel width, this is an aggressive fitment that commits to poke and a wider track. The 2,600-lb load rating supports full-size truck and SUV applications, and backspacing measures 4.77 inches.\u003c\/p\u003e\u003cp\u003eRotary Forged Construction\u003c\/p\u003e\u003cp\u003eThe AX2.0 is built through a rotary forging process: after the initial cast, the barrel is heated and spun under pressure, which refines and densifies the aluminum grain structure for a stronger barrel than low-pressure casting alone. The spinning step is what separates this process from standard casting, and it's why the AX2.0 can carry a 12-inch-wide barrel at 22 inches without the weight penalty a conventional cast wheel would carry. At 45 lbs, this wheel comes in close to the typical weight for rotary forged 22-inch truck wheels in this width class.\u003c\/p\u003e\u003cp\u003eSplit 8-Spoke Mesh Design with Exposed Lugs\u003c\/p\u003e\u003cp\u003eThe face runs a split 8-spoke mesh layout, with each spoke pair framing milled windows that open up the disc and contrast the gloss black finish with a bright machined surface. Rivets accent the design, adding visual texture to the face. Lug hardware sits exposed in a circle around the hub bore at the center of the face, keeping the hardware visible as part of the design rather than concealing it behind a cap. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eFitment for 5x127 (5x5) and 5x139.7 (5x5.5) Platforms\u003c\/p\u003e\u003cp\u003eThis wheel is dual-drilled for two distinct 5-lug bolt patterns. The 5x127 (5x5) pattern covers Jeep Wrangler JK through current generation, Jeep Grand Cherokee, and Ram 1500 platforms. The 5x139.7 (5x5.5) pattern fits older Ford F-150, Jeep Cherokee XJ, Jeep Wagoneer, and similar classic 5-lug truck and SUV platforms. Verified fitment includes the Jeep Wrangler (2007-2026), Jeep Grand Cherokee (1999-2026), Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), among 10 additional verified platforms. The 87.10mm hub bore fits across these 5x127 and 5x139.7 applications. The AX2.0 is also offered in additional sizes, widths, and finishes across the lineup to suit different build targets.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127 \/ 5x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-44 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.77\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack Milled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eRotary Forged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e45 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Axe Offroad","offers":[{"title":"Default Title","offer_id":68712998732057,"sku":"221210H-44AX2BM","price":700.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/ax2.0_blackmilled_white__09254.jpg?v=1794772231"},{"product_id":"22x10-black-milled-wheel-ax2-0-5x5-5x5-5-19-221010h-19ax2bm","title":"AX2.0 Black Milled | 22x10 | 5x5\/5x5.5 -19mm Offset | 221010H-19AX2BM","description":"\u003cp\u003eDual-Drilled for Two Bolt-Pattern Groups\u003c\/p\u003e\u003cp\u003eThe Axe Offroad AX2.0 arrives in a 22x10 format drilled for both 5x127 (5x5) and 5x139.7 (5x5.5) bolt patterns, opening fitment across two distinct platform families. The 5x127 pattern covers Jeep Wrangler JK and Grand Cherokee applications, along with pre-2019 Ram 1500 and older Chevy half-ton platforms like the Tahoe, C1500, and GMC Yukon. The 5x139.7 side of the drill covers older Ford F-150 and Bronco generations, pre-2002 Dodge Ram 1500, Jeep Wagoneer and Cherokee XJ, and similar classic 5-lug truck platforms. In total, the AX2.0 spans 32 verified fitments across both bolt-pattern groups. The 87.10mm hub bore fits the platforms covered by both patterns.\u003c\/p\u003e\u003cp\u003eRotary Forged Construction\u003c\/p\u003e\u003cp\u003eThis is a one-piece rotary forged wheel. After the initial cast, the barrel is heated and spun under pressure, which refines and densifies the aluminum grain structure through that spinning step. The result is a barrel that is structurally stronger than what low-pressure casting alone produces. At 45 lbs, the AX2.0 comes in close to the typical weight for a rotary forged 22-inch truck wheel in this width class. The 2,600-lb load rating supports truck and SUV applications across the verified fitment range. Backspacing measures 4.75 inches.\u003c\/p\u003e\u003cp\u003eSplit Eight-Spoke Mesh Design with Exposed Lugs\u003c\/p\u003e\u003cp\u003eThe AX2.0 runs a split eight-spoke mesh design. The spokes divide and branch outward from the hub area, creating an open, layered face with a mesh-like visual depth. Milled spoke windows cut through the gloss black finish to reveal the raw aluminum beneath, giving the face a two-tone contrast without any paint or secondary coating on those surfaces. Rivets accent the face, adding a hardware-forward detail consistent with Axe Offroad's off-road styling direction. Lug hardware sits exposed and visible in a circle around the hub bore at the center of the face, keeping the mounting hardware on display as part of the overall look. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOffset and Stance at -19mm\u003c\/p\u003e\u003cp\u003eAt -19mm, the mounting surface sits rearward of the wheel's centerline, pushing the face outboard from the hub. On a 10-inch-wide barrel, that combination qualifies as an aggressive outboard position, moving the wheel toward the fender and widening the track relative to stock. This offset suits builds running leveling kits or lift kits where additional clearance and a wider stance are part of the goal. Verified fitment covers Jeep Wrangler (2007-2026), Jeep Grand Cherokee (1999-2026), Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), GMC Yukon (1992-1999), and 10 additional verified platforms across both bolt-pattern groups.\u003c\/p\u003e\u003cp\u003eFinish and Availability\u003c\/p\u003e\u003cp\u003eThe Gloss Black with Milled Spoke Windows finish pairs a deep gloss black across the face and barrel with raw milled surfaces on the spoke windows for a clean, high-contrast look. The AX2.0 is also offered in additional sizes, widths, and finish options across the lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127 \/ 5x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-19 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.75\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack Milled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eRotary Forged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e45 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Axe Offroad","offers":[{"title":"Default Title","offer_id":68712999092505,"sku":"221010H-19AX2BM","price":675.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/ax2.0_blackmilled_white__26439.jpg?v=1794772232"},{"product_id":"24x14-black-milled-wheel-ax2-0-5x5-5x5-5-76-241410h-76ax2bm","title":"AX2.0 Black Milled | 24x14 | 5x5\/5x5.5 -76mm Offset | 241410H-76AX2BM","description":"\u003cp\u003eDual-Drilled Fitment for Two Classic 5-Lug Platforms\u003c\/p\u003e\u003cp\u003eThe Axe Offroad AX2.0 is drilled for both 5x127 (5x5) and 5x139.7 (5x5.5) bolt patterns, opening it up to a wide range of classic 5-lug truck and SUV applications. The 5x127 pattern covers platforms like the Jeep Wrangler JK, Jeep Grand Cherokee, and Ram 1500 pre-2019 generation. The 5x139.7 side brings in older Ford F-150, Jeep Cherokee XJ, and similar classic 5-lug truck platforms. Verified fitment includes the Jeep Wrangler (2007-2026), Jeep Grand Cherokee (1999-2026), Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), with 10 additional verified platforms beyond those five. The 87.10mm hub bore fits across these bolt-pattern groups without modification.\u003c\/p\u003e\u003cp\u003eRotary Forged Construction at 24 Inches\u003c\/p\u003e\u003cp\u003eThe AX2.0 is built as a one-piece rotary forged wheel. In this process, the cast aluminum barrel is heated and spun under pressure, which refines and densifies the grain structure of the aluminum for a stronger barrel than low-pressure casting alone produces. At 51 lbs in a 24x14 size, that is consistent with what rotary forged construction delivers at this diameter and width. The process is what separates this wheel from a standard cast piece, and it shows in the barrel integrity at a size that puts real demands on the structure.\u003c\/p\u003e\u003cp\u003eSplit 8-Spoke Mesh Design with Exposed Lugs\u003c\/p\u003e\u003cp\u003eThe AX2.0 runs a split 8-spoke mesh design with a gloss black finish and milled spoke windows that open up the face with a contrasting machined surface. The milling cuts through the gloss black to reveal the aluminum beneath, giving the face a two-tone look without any additional paint or coating. Lug hardware is exposed and visible on the face around the central hub area, which is a deliberate part of the design rather than something hidden behind a cap. Rivets accent the wheel as well, adding to the layered visual detail. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOffset and Stance at -76mm\u003c\/p\u003e\u003cp\u003eAt -76mm offset, the mounting surface sits well rearward of the wheel's centerline, pushing the face outboard from the hub. On a 14-inch-wide barrel, that combination places the wheel significantly outside the factory track width. This is an aggressive outboard position that suits builds running lift kits where fender clearance has been opened up. Backspacing measures 4.51 inches. The 2,600-lb load rating covers truck and SUV applications across the verified fitment range.\u003c\/p\u003e\u003cp\u003eA 24-Inch Show-Ready Presence\u003c\/p\u003e\u003cp\u003eAt 24 inches in diameter, the AX2.0 is built to draw attention. This is a size that commands presence at truck meets and shows, and the split mesh design with milled windows and exposed hardware gives it the detail work to back up the scale. The AX2.0 is also offered in additional sizes, widths, and finishes across the lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127 \/ 5x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-76 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.51\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack Milled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eRotary Forged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e51 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Axe Offroad","offers":[{"title":"Default Title","offer_id":68712999485721,"sku":"241410H-76AX2BM","price":840.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/ax2.0_blackmilled_white__44453.jpg?v=1794772233"},{"product_id":"24x12-black-milled-wheel-ax2-0-6x135-6x5-5-44-241212h-44ax2bm","title":"AX2.0 Black Milled | 24x12 | 6x135\/6x5.5 -44mm Offset | 241212H-44AX2BM","description":"\u003cp\u003eFord and GM Full-Size Fitment in One Wheel\u003c\/p\u003e\u003cp\u003eThe Axe Offroad AX2.0 is a dual-drilled 24x12 wheel covering two of the most common 6-lug truck bolt patterns: 6x135 and 6x139.7 (6x5.5). The 6x135 pattern fits the Ford F-150 (2004-2026), Ford Expedition (2003-2027), Lincoln Navigator (2003-2027), Ford F-150 Lightning (2022-2026), and Ford Bronco (2022-2026), plus one additional verified platform. The 6x139.7 pattern opens this wheel up to Chevy Silverado 1500, GMC Sierra 1500, Tahoe, Suburban, Yukon, Escalade, Toyota Tacoma, 4Runner, Nissan Titan, and similar applications. The 106.10mm hub bore fits these platforms, and the 2,600-lb load rating supports full-size truck use. A center cap is included.\u003c\/p\u003e\u003cp\u003eAggressive Offset, Wide Barrel\u003c\/p\u003e\u003cp\u003eAt -44mm on a 12-inch-wide barrel, the AX2.0 pushes the mounting surface well rearward of centerline, moving the wheel outward for a wide, aggressive stance. This combination of 12-inch width and -44mm offset puts the wheel firmly in aggressive fitment territory, with noticeable outboard positioning and poke relative to stock. Backspacing measures 4.77 inches. This is a wheel sized and offset for builds running a lift kit, where the added clearance lets the 24-inch diameter and wide barrel sit properly in the fender arch without interference.\u003c\/p\u003e\u003cp\u003eSplit Eight-Spoke Mesh with Milled Windows\u003c\/p\u003e\u003cp\u003eThe AX2.0 runs a split eight-spoke mesh layout with milled spoke windows cut into the face, giving the gloss black surface a two-tone contrast between the deep black finish and the brighter milled openings. Rivets accent the design, and the exposed lug hardware sits in a circle around the hub bore at the center of the face, adding to the aggressive, hardware-forward look. The outer lip adds depth to the profile, and the overall design suits builds going for a bold, intentional presence on lifted full-size trucks.\u003c\/p\u003e\u003cp\u003eOne-Piece Cast Construction\u003c\/p\u003e\u003cp\u003eThe AX2.0 is built as a one-piece cast alloy wheel. Cast construction supports the complex mesh design geometry and milled spoke window detail in a single continuous shape, keeping the design's depth and surface complexity intact. At 51 lbs, this wheel comes in right at the typical weight for a 24-inch alloy wheel of this width, consistent with what cast construction delivers at this scale. The one-piece build keeps the wheel straightforward to mount and maintain across daily-driven and weekend-use lifted trucks.\u003c\/p\u003e\u003cp\u003eBolt Pattern and Size Breadth\u003c\/p\u003e\u003cp\u003eThe AX2.0 is also offered in additional sizes, widths, finishes, and bolt-pattern options across the lineup, so if this specific combination does not match your build, other configurations are available to explore.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x135 \/ 6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-44 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.77\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack Milled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e51 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Axe Offroad","offers":[{"title":"Default Title","offer_id":68712999813401,"sku":"241212H-44AX2BM","price":840.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/ax2.0_blackmilled_white__41424.jpg?v=1794772234"},{"product_id":"20x10-black-milled-wheel-ax2-0-6x5-5-19-20106139-19ax2bm","title":"AX2.0 Black Milled | 20x10 | 6x5.5 -19mm Offset | 20106139-19AX2BM","description":"\u003cp\u003eSplit Eight-Spoke Presence on a 6x139.7 Platform\u003c\/p\u003e\u003cp\u003eThe Axe Offroad AX2.0 arrives in a 20x10 footprint with a gloss black finish and milled spoke windows that open up the face with contrast between the dark painted surfaces and the bright machined detail. Eight split spokes radiate from the hub in a mesh-influenced pattern, giving the wheel a layered, structured look that suits aggressive truck builds. Rivets accent the face, adding a hardware-forward detail consistent with Axe Offroad's off-road design language. A center cap is included with this wheel, covering the lug hardware at the hub for a finished look when you want it.\u003c\/p\u003e\u003cp\u003eRotary Forged Construction\u003c\/p\u003e\u003cp\u003eThe AX2.0 is built as a one-piece rotary forged wheel. In this process, the cast aluminum barrel is heated and then spun under pressure, which refines and densifies the grain structure of the aluminum through that spinning step. The result is a barrel that is stronger than what low-pressure casting alone produces. At 37 lbs for a 20-inch, 10-inch-wide wheel, the construction reflects what the rotary forging process delivers at this size and width.\u003c\/p\u003e\u003cp\u003eOffset, Exposed Lugs, and Face Detail\u003c\/p\u003e\u003cp\u003eThe -19mm offset places the mounting surface rearward of the wheel's centerline, pushing the face outboard relative to the hub. On a 10-inch-wide wheel, that combination moves the wheel outward for a wider stance than stock. The 4.75 inches of backspacing works with that offset to position the barrel in the wheel well. Lug hardware is exposed and visible on the face, sitting in a circle around the 106.10mm hub bore where the wheel mounts to the vehicle. The hub bore fits 6x139.7 (6x5.5) platforms including Chevy Silverado 1500, GMC Sierra 1500, Toyota Tacoma, Toyota Tundra, and Chevrolet K1500, among 114 verified fits across the full fitment universe.\u003c\/p\u003e\u003cp\u003eFitment Across Full-Size and Mid-Size Trucks\u003c\/p\u003e\u003cp\u003eVerified fitment covers the Chevrolet Silverado 1500 from 1999 through 2026, GMC Sierra 1500 from 2000 through 2026, Toyota Tacoma from 1995 through 2026, Toyota Tundra from 2000 through 2026, and Chevrolet K1500 from 1988 through 1999, with 10 additional verified platforms beyond those five. The 2,600-lb load rating is rated for full-size and mid-size truck applications. The AX2.0 is also offered in additional sizes, widths, and finishes across the lineup to cover other builds and bolt-pattern groups.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-19 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.75\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack Milled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eRotary Forged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e37 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Axe Offroad","offers":[{"title":"Default Title","offer_id":68713000206617,"sku":"20106139-19AX2BM","price":530.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/ax2.0_blackmilled_white__22099.jpg?v=1794772235"},{"product_id":"20x12-silver-wheel-ax2-1-5x5-5x5-5-44-201210h-44ax2sm","title":"AX2.1 Silver | 20x12 | 5x5\/5x5.5 -44mm Offset | 201210H-44AX2SM","description":"\u003cp\u003eWide Stance on Dual 5-Lug Platforms\u003c\/p\u003e\u003cp\u003eThe Axe Offroad AX2.1 arrives in a 20x12 footprint with a -44mm offset, which shifts the mounting surface well rearward of the wheel's centerline and pushes the face outboard for a pronounced wide-stance look. At 12 inches wide with a -44mm offset, this is an aggressive combination that commits to poke and presence. Backspacing measures 4.77 inches. The 87.1mm hub bore fits the 5x127 (5x5) and 5x139.7 (5x5.5) platforms this wheel is drilled for.\u003c\/p\u003e\u003cp\u003eDual-Drilled for Two Classic 5-Lug Families\u003c\/p\u003e\u003cp\u003eThe AX2.1 is dual-drilled to cover two distinct 5-lug bolt-pattern groups. The 5x127 (5x5) pattern fits Jeep Wrangler JK and Grand Cherokee applications, Ram 1500 trucks from the pre-2019 generation, and older Chevy half-ton platforms. The 5x139.7 (5x5.5) pattern covers older Ford F-150 and Bronco builds, pre-2002 Dodge Ram 1500, Jeep Wagoneer and Cherokee XJ, and similar classic 5-lug truck and SUV platforms. Verified fitment spans 32 applications, including Jeep Wrangler (2007-2026), Jeep Grand Cherokee (1999-2026), Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), among 10 additional verified platforms.\u003c\/p\u003e\u003cp\u003eSplit 8-Spoke Mesh Design with Exposed Hardware\u003c\/p\u003e\u003cp\u003eThe AX2.1 carries a split 8-spoke mesh layout with a silver finish and brushed spoke accents that add tonal contrast across the face. The silver areas of the face provide a clean backdrop, while the brushed treatment on the spokes gives the wheel a layered, dimensional look without going chrome or gloss. Rivets sit on the wheel, adding a hardware-forward detail consistent with Axe Offroad's off-road-influenced design language. Lug hardware is exposed and visible around the hub area at the center of the face, keeping the mounting hardware on display as part of the overall aesthetic. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eRotary Forged One-Piece Construction\u003c\/p\u003e\u003cp\u003eThe AX2.1 is built as a one-piece rotary forged wheel. In this process, the cast aluminum barrel is heated and then spun under pressure, which refines and densifies the grain structure of the aluminum for a stronger barrel than low-pressure casting alone produces. That spinning step is what separates rotary forging from standard casting and is the defining characteristic of the construction. The wheel weighs 37 lbs, which is slightly under the typical weight for a rotary forged 20-inch wheel in this width class. The 2,600-lb load rating supports truck and SUV applications across the verified fitment range.\u003c\/p\u003e\u003cp\u003eBuild Fit and Availability\u003c\/p\u003e\u003cp\u003eThis 20x12 at -44mm is sized for builds running leveling kits or lift kits where the added clearance accommodates the outboard positioning and wider track. The AX2.1 is also offered in additional sizes, widths, finishes, and bolt-pattern options across the lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127 \/ 5x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-44 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.77\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSilver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eRotary Forged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e37 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Axe Offroad","offers":[{"title":"Default Title","offer_id":68713000534297,"sku":"201210H-44AX2SM","price":600.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/ax2.1_silver_white__31435.jpg?v=1794772237"},{"product_id":"22x10-silver-wheel-ax2-1-5x5-5x5-5-19-221010h-19ax2sm","title":"AX2.1 Silver | 22x10 | 5x5\/5x5.5 -19mm Offset | 221010H-19AX2SM","description":"\u003cp\u003eSplit Eight-Spoke Mesh in Silver with Brushed Accents\u003c\/p\u003e\u003cp\u003eThe Axe Offroad AX2.1 arrives in a 22x10 footprint with a silver finish and brushed spoke accents that add contrast across the face. Eight split spokes radiate outward in a mesh-style arrangement, giving the wheel a layered, open look that suits aggressive truck and SUV builds. Lug hardware sits exposed around the hub bore, visible on the face and adding a hardware-forward detail to the overall look. Rivets accent the design as well, reinforcing the intentional, built-out character Axe Offroad brings from its UK-rooted off-road styling sensibility. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eRotary Forged One-Piece Construction\u003c\/p\u003e\u003cp\u003eThe AX2.1 is built as a one-piece rotary forged wheel. In this process, the cast aluminum barrel is heated and then spun under pressure, which refines and densifies the grain structure of the aluminum for a stronger barrel than low-pressure casting alone produces. The spinning step is what separates rotary forging from standard casting, and it results in a barrel that handles the side-load and impact demands of truck and SUV use. At 45 lbs, this 22-inch, 10-inch-wide wheel comes in close to typical for its class.\u003c\/p\u003e\u003cp\u003eOffset and Stance at -19mm\u003c\/p\u003e\u003cp\u003eAt -19mm, the mounting surface sits rearward of the wheel's centerline, pushing the face outboard from the hub. Combined with a 10-inch width, this wheel meets the threshold for wider-stance framing: the outboard positioning adds visual presence and a more aggressive track relative to stock. The 4.75 inches of backspacing and the 87.10mm hub bore fit the 5x127 (5x5) and 5x139.7 (5x5.5) platforms this wheel is drilled for.\u003c\/p\u003e\u003cp\u003eDual-Drilled for 5x127 and 5x139.7 Platforms\u003c\/p\u003e\u003cp\u003eThe AX2.1 is dual-drilled, covering both the 5x127 (5x5) and 5x139.7 (5x5.5) bolt patterns in a single wheel. The 5x127 pattern fits platforms like the Jeep Wrangler JK and Grand Cherokee, pre-2019 Ram 1500, and older Chevrolet half-ton trucks. The 5x139.7 pattern covers older Ford F-150 and Bronco applications, pre-2002 Dodge Ram 1500, Jeep Wagoneer and Cherokee XJ, and similar classic 5-lug truck platforms. Verified fitment includes the Jeep Wrangler (2007-2026), Jeep Grand Cherokee (1999-2026), Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), among 15 additional verified platforms. The 2,600-lb load rating is sized for truck and SUV applications across this fitment range. The AX2.1 is also offered in additional sizes and finishes for builds with different requirements.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127 \/ 5x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-19 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.75\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSilver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eRotary Forged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e45 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Axe Offroad","offers":[{"title":"Default Title","offer_id":68713000960281,"sku":"221010H-19AX2SM","price":675.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/ax2.1_silver_white__13250.jpg?v=1794772238"},{"product_id":"22x12-silver-wheel-ax2-1-5x5-5x5-5-44-221210h-44ax2sm","title":"AX2.1 Silver | 22x12 | 5x5\/5x5.5 -44mm Offset | 221210H-44AX2SM","description":"\u003cp\u003eSplit Eight-Spoke Mesh on a Dual-Drilled Platform\u003c\/p\u003e\u003cp\u003eThe Axe Offroad AX2.1 is a 22x12 one-piece rotary forged wheel finished in Silver with Brushed Spoke Accents. Eight split spokes radiate outward in a mesh-influenced pattern, with the silver surfaces contrasting against the brushed spoke faces for a layered, textured look. Rivets accent the face, and the exposed lug hardware sits in a circle around the hub bore, keeping the mounting hardware visible as part of the design rather than hidden behind a cap. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eRotary Forged Construction\u003c\/p\u003e\u003cp\u003eThe AX2.1 is built using a rotary forging process: after the initial cast, the barrel is heated and spun under pressure, which refines and densifies the aluminum grain structure for a stronger barrel than low-pressure casting alone. That spinning step is what separates rotary forged wheels from standard cast production. At 45 lbs for a 22-inch, 12-inch-wide wheel, the weight is consistent with what this construction method and size class deliver.\u003c\/p\u003e\u003cp\u003eOffset and Stance at -44mm\u003c\/p\u003e\u003cp\u003eAt -44mm, the mounting surface sits well rearward of the wheel's centerline, pushing the face outboard from the hub. On a 12-inch-wide barrel, that combination places the wheel significantly outside the stock track. This is an aggressive outboard stance, and it suits builds running lift kits where fender clearance has been opened up. Backspacing measures 4.77 inches. The 87.10mm hub bore fits both 5x127 (5x5) and 5x139.7 (5x5.5) platforms.\u003c\/p\u003e\u003cp\u003eFitment for 5x127 and 5x139.7 Platforms\u003c\/p\u003e\u003cp\u003eThis wheel is dual-drilled, covering two distinct bolt-pattern groups. The 5x127 (5x5) pattern fits Jeep Wrangler JK and JL generations (2007 and newer), Jeep Grand Cherokee, Ram 1500 pre-2019, and older GM half-ton platforms including the Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999). The 5x139.7 (5x5.5) pattern covers older Ford F-150 and Bronco, pre-2002 Dodge Ram 1500, Jeep Wagoneer and Cherokee XJ, and similar classic 5-lug truck platforms. Across both patterns, there are 32 verified fitment applications. The 2,600-lb load rating is rated for truck use across this range.\u003c\/p\u003e\u003cp\u003eAvailable Across the AX2.1 Lineup\u003c\/p\u003e\u003cp\u003eThe AX2.1 is offered in additional sizes, widths, finishes, and bolt-pattern options beyond this 22x12 Silver setup, so there are paths to match different builds and platform requirements within the same design family.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127 \/ 5x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-44 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.77\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSilver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eRotary Forged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e45 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Axe Offroad","offers":[{"title":"Default Title","offer_id":68713001353497,"sku":"221210H-44AX2SM","price":740.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/ax2.1_silver_white__14893.jpg?v=1794772239"},{"product_id":"24x14-silver-wheel-ax2-1-5x5-5x5-5-76-241410h-76ax2sm","title":"AX2.1 Silver | 24x14 | 5x5\/5x5.5 -76mm Offset | 241410H-76AX2SM","description":"\u003cp\u003eDual-Drilled for Two Classic 5-Lug Platforms\u003c\/p\u003e\u003cp\u003eThe Axe Offroad AX2.1 arrives in a 24x14 footprint with a -76mm offset, drilled for both 5x127 (5x5) and 5x139.7 (5x5.5) bolt patterns. The 5x127 pattern covers Jeep Wrangler JK and Grand Cherokee builds, along with pre-2019 Ram 1500 and older Chevy half-ton platforms like the Tahoe, C1500, and GMC Yukon. The 5x139.7 side opens the wheel to older Ford F-150 and Bronco applications, pre-2002 Dodge Ram 1500, Jeep Wagoneer and Cherokee XJ, and similar classic 5-lug truck platforms. Across both patterns, the AX2.1 covers 32 verified fitments, with the five primary fits including Jeep Wrangler (2007-2026), Jeep Grand Cherokee (1999-2026), Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), among 10 additional verified applications. The 87.10mm hub bore fits both bolt-pattern groups.\u003c\/p\u003e\u003cp\u003eRotary Forged Construction at 24 Inches\u003c\/p\u003e\u003cp\u003eThe AX2.1 is a one-piece rotary forged wheel. In this process, the cast aluminum barrel is heated and spun under pressure, which refines and densifies the grain structure of the aluminum for a stronger barrel than low-pressure casting alone produces. At 51 lbs for a 24-inch, 14-inch-wide wheel, the weight is right in line with what this class and width demand. A center cap is included.\u003c\/p\u003e\u003cp\u003eSplit 8-Spoke Mesh Design with Exposed Lugs\u003c\/p\u003e\u003cp\u003eThe face carries a split 8-spoke mesh layout with rivets accenting the design. Each of the eight split spokes carries a brushed finish accent against the silver background, giving the face a two-tone contrast without machining. The lug hardware sits exposed and visible in a circle around the hub bore at the center of the face, a deliberate styling choice that puts the mounting hardware on display rather than concealing it behind a cap. The wheel also features a visible outer lip that adds depth to the profile at this 14-inch width.\u003c\/p\u003e\u003cp\u003eWhat a -76mm Offset Means for Your Build\u003c\/p\u003e\u003cp\u003eAt -76mm, the mounting surface sits well rearward of the wheel's centerline, pushing the face and barrel outward from the hub. On a 14-inch-wide wheel at this diameter, that offset produces substantial outboard positioning. This is an aggressive fitment suited to builds running lift kits where fender clearance has been opened up. The 4.51 inches of backspacing reflects how far the inner barrel sits from the mounting face. The 2,600-lb load rating covers the truck and SUV platforms this wheel is built for.\u003c\/p\u003e\u003cp\u003eA 24-inch diameter at this width and offset is a show-forward choice, the kind of wheel that commands attention at truck meets and lifted-truck events. The AX2.1 is also offered in additional sizes, widths, and finishes across the lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127 \/ 5x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-76 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.51\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSilver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eRotary Forged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e51 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Axe Offroad","offers":[{"title":"Default Title","offer_id":68713001746713,"sku":"241410H-76AX2SM","price":900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/ax2.1_silver_white__48058.jpg?v=1794772240"},{"product_id":"20x10-silver-wheel-ax2-1-6x5-5-19-20106139-19ax2sm","title":"AX2.1 Silver | 20x10 | 6x5.5 -19mm Offset | 20106139-19AX2SM","description":"\u003cp\u003eSplit Eight-Spoke Presence on a 6x139.7 Platform\u003c\/p\u003e\u003cp\u003eThe Axe Offroad AX2.1 arrives in a 20x10 footprint with a silver finish and brushed spoke accents that give the face a two-tone contrast without going chrome. Eight split spokes radiate from the hub in a mesh-influenced pattern, with the brushed treatment on the spoke surfaces setting them apart from the silver surrounding areas. Exposed lug hardware sits in a ring around the 106.1mm hub bore, keeping the mounting hardware visible as part of the face's overall look. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eRotary Forged Construction\u003c\/p\u003e\u003cp\u003eThe AX2.1 is built as a one-piece rotary forged wheel. In this process, the cast aluminum barrel is heated and then spun under pressure, which refines and densifies the grain structure of the aluminum through that spinning step. The result is a barrel that is stronger than what low-pressure casting alone produces. At 37 lbs for a 20-inch, 10-inch-wide wheel, the construction reflects what the rotary forging process delivers at this size and width.\u003c\/p\u003e\u003cp\u003eOffset and Stance\u003c\/p\u003e\u003cp\u003eAt -19mm, the mounting surface sits rearward of the wheel's centerline, pushing the face outboard from the hub. Combined with the 10-inch width, this is an aggressive fitment that moves the wheel outward for a wider track and more poke relative to stock positioning. Backspacing measures 4.75 inches. This combination suits builds running leveling kits or lift kits where the added clearance accommodates the outboard positioning.\u003c\/p\u003e\u003cp\u003eFitment Across 6x139.7 Platforms\u003c\/p\u003e\u003cp\u003eThe 6x139.7 (6x5.5) bolt pattern and 106.1mm hub bore fit the Chevrolet Silverado 1500 (1999-2026), GMC Sierra 1500 (2000-2026), Toyota Tacoma (1995-2026), Toyota Tundra (2000-2026), and Chevrolet K1500 (1988-1999), with 10 additional verified platforms in the fitment universe. In total, this wheel fits 114 verified applications across the 6x139.7 platform group, which also includes Nissan Titan, Toyota 4Runner, Sequoia, and similar 6-lug truck and SUV platforms. The AX2.1 is also offered in additional sizes and finish options across the lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-19 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.75\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSilver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eRotary Forged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e37 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Axe Offroad","offers":[{"title":"Default Title","offer_id":68713002172697,"sku":"20106139-19AX2SM","price":575.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/ax2.1_silver_white__14067.jpg?v=1794772242"},{"product_id":"20x10-red-wheel-ax2-2-5x5-5x5-5-19-201010h-19ax2rm","title":"AX2.2 Red | 20x10 | 5x5\/5x5.5 -19mm Offset | 201010H-19AX2RM","description":"\u003cp\u003eDual-Drilled for Jeep and Classic Truck Platforms\u003c\/p\u003e\u003cp\u003eJeep Wrangler and Grand Cherokee owners get a wheel sized for the 5x127 (5x5) bolt pattern, covering Wrangler builds from 2007 through 2026 and Grand Cherokee applications from 1999 through 2026. The AX2.2 is also drilled for 5x139.7 (5x5.5), opening fitment to classic Ford F-150 and Bronco platforms, pre-2002 Dodge Ram 1500, Jeep Cherokee XJ, and similar legacy 5-lug truck applications. The 87.1mm hub bore fits both bolt-pattern groups, and the 2,600-lb load rating supports the demands of full-size Jeep and truck builds. Beyond the five primary verified platforms, this wheel fits 10 additional verified applications across both patterns.\u003c\/p\u003e\u003cp\u003eCandy Red Finish with Milled Spoke Windows\u003c\/p\u003e\u003cp\u003eThe AX2.2 wears a Candy Red finish with milled spoke windows, a combination that puts two distinct surface treatments on the same face. The deep, saturated candy red covers the wheel's body while the milled windows cut through each spoke section to expose a contrasting bright aluminum surface. Rivets accent the design, adding a hardware-forward detail that suits the off-road character Axe Offroad brings to its truck and SUV lineup. Lug hardware sits exposed on the face around the hub bore, visible in a circle at the center of the wheel where it mounts to the vehicle. A center cap is included.\u003c\/p\u003e\u003cp\u003eOne-Piece Cast Alloy Construction\u003c\/p\u003e\u003cp\u003eThe AX2.2 is built as a one-piece cast alloy wheel, a construction that handles the split eight-spoke mesh geometry and milled window detail in a single continuous form. Cast aluminum supports the complex spoke geometry and undercut milling without requiring assembly, keeping the design structurally intact through the load cycles a Jeep or truck build puts on it. At 37 lbs, this wheel comes in below the typical weight for a 20-inch alloy truck wheel in this width class, which typically runs closer to 45 lbs for a 10-inch-wide 20-inch wheel.\u003c\/p\u003e\u003cp\u003eOffset and Stance at -19mm\u003c\/p\u003e\u003cp\u003eAt -19mm, the mounting surface sits rearward of the wheel's centerline, pushing the wheel outward from the hub. On a 10-inch-wide wheel, that combination qualifies as an aggressive, outboard stance that adds visible poke and a wider track presence to Jeep and truck builds. The 4.75 inches of backspacing positions the inner barrel accordingly. This offset is well-suited to builds running a lift kit, where the added clearance lets the wider stance work without interference.\u003c\/p\u003e\u003cp\u003eBuild Range and Availability\u003c\/p\u003e\u003cp\u003eThe AX2.2 is offered across additional sizes, widths, and finish options beyond this Candy Red 20x10 setup, with both 6-lug and 5-lug bolt patterns available across the lineup. If this size or finish does not match your build, other configurations in the AX2.2 family cover a broader range of truck and Jeep applications.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127 \/ 5x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-19 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.75\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eRed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e37 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Axe Offroad","offers":[{"title":"Default Title","offer_id":68713002500377,"sku":"201010H-19AX2RM","price":450.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/ax2.2_red_white__56281.jpg?v=1794772243"},{"product_id":"20x12-red-wheel-ax2-2-6x135-6x5-5-44-201212h-44ax2rm","title":"AX2.2 Red | 20x12 | 6x135\/6x5.5 -44mm Offset | 201212H-44AX2RM","description":"\u003cp\u003eFord and GM Truck Fitment in Two Bolt Patterns\u003c\/p\u003e\u003cp\u003eThe Axe Offroad AX2.2 is a dual-drilled 20x12 wheel covering two of the most common 6-lug truck bolt patterns: 6x135 and 6x139.7 (6x5.5). The 6x135 pattern fits the Ford F-150 (2004-2026), Ford Expedition (2003-2027), Lincoln Navigator (2003-2027), Ford F-150 Lightning (2022-2026), and Ford Bronco (2022-2026), plus one additional verified platform. The 6x139.7 pattern opens the AX2.2 to GM full-size trucks and SUVs including the Silverado 1500, Sierra 1500, Tahoe, Suburban, Yukon, and Escalade, along with Toyota Tundra, 4Runner, Tacoma, Nissan Titan, and similar applications. The 106.10mm hub bore fits across these platforms. Load rating comes in at 2,600 lbs, and backspacing measures 4.77 inches.\u003c\/p\u003e\u003cp\u003eCandy Red Finish with Milled Spoke Windows\u003c\/p\u003e\u003cp\u003eAxe Offroad's UK-rooted design sensibility shows up clearly in the AX2.2's finish: a deep Candy Red with milled spoke windows that cut through the color to expose the raw aluminum beneath. The contrast between the saturated red and the bright milled surfaces gives the wheel a layered, intentional look that stands out on any build. Rivets accent the face, adding a hardware-forward detail consistent with Axe's off-road styling direction. Lug hardware sits exposed around the hub bore, visible on the face and adding to the aggressive, purposeful character of the design. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eSplit Eight-Spoke Mesh Design\u003c\/p\u003e\u003cp\u003eThe AX2.2 runs a split eight-spoke mesh pattern, with each spoke pair branching outward from the hub to create an open, layered face. The mesh geometry gives the wheel visual depth without overcomplicating the design, and the milled spoke windows break up the red surfaces with bright contrast at regular intervals across the face. The outer lip adds further dimension to the profile, framing the face with a clean edge that suits the wheel's overall character.\u003c\/p\u003e\u003cp\u003eOne-Piece Cast Alloy Construction\u003c\/p\u003e\u003cp\u003eThe AX2.2 is built as a one-piece cast alloy wheel, a construction that supports the complex spoke geometry and milled window detail the design demands. Cast aluminum molds accommodate the split-spoke mesh profile, the contoured lip, and the precise milled surfaces in a single continuous structure. At 37 lbs, this wheel comes in below the typical weight for a 20-inch alloy truck wheel in this width class, where comparable pieces often run closer to 45 lbs. The AX2.2 is also offered in additional sizes, widths, and finishes across the lineup for builds with different fitment needs.\u003c\/p\u003e\u003cp\u003eAggressive Offset for a Wide Stance\u003c\/p\u003e\u003cp\u003eAt -44mm offset on a 12-inch-wide barrel, the AX2.2 pushes the mounting surface well rearward of the wheel's centerline, positioning the face outboard for a wide, aggressive stance. This combination of 12-inch width and -44mm offset qualifies as a genuinely aggressive fitment, with the wheel sitting noticeably outboard relative to stock positioning. Trucks running a lift kit get the most out of this setup, where the added clearance lets the full width of the wheel sit without interference.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x135 \/ 6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-44 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.77\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eRed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e37 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Axe Offroad","offers":[{"title":"Default Title","offer_id":68713002926361,"sku":"201212H-44AX2RM","price":450.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/ax2.2_red_white__90432.jpg?v=1794772244"},{"product_id":"24x14-red-wheel-ax2-2-6x135-6x5-5-76-241412h-76ax2rm","title":"AX2.2 Red | 24x14 | 6x135\/6x5.5 -76mm Offset | 241412H-76AX2RM","description":"\u003cp\u003eA 24-Inch Statement in Candy Red\u003c\/p\u003e\u003cp\u003eThe Axe Offroad AX2.2 arrives in a Candy Red finish with milled spoke windows, a combination that puts deep color and machined contrast on the same face. At 24 inches in diameter, this is a wheel sized for presence, the kind of fitment that draws attention at truck meets and on the street. The split eight-spoke mesh design gives the face an open, layered look, and the milled windows cut through each spoke to add a bright accent against the red. Exposed lug hardware sits in a circle around the hub bore, keeping the mounting hardware visible as part of the face's visual character. A center cap is included.\u003c\/p\u003e\u003cp\u003eRotary Forged Construction\u003c\/p\u003e\u003cp\u003eThe AX2.2 is built as a one-piece rotary forged wheel. In this process, the cast aluminum barrel is heated and then spun under pressure, which refines and densifies the grain structure of the aluminum through that spinning step. The result is a barrel that is stronger than what low-pressure casting alone produces, without adding significant mass. At 51 lbs, this 24x14 sits right in line with what the class typically runs. The 2,600-lb load rating supports full-size truck applications. Backspacing measures 4.51 inches.\u003c\/p\u003e\u003cp\u003eDual-Drilled for Ford and GM Platforms\u003c\/p\u003e\u003cp\u003eThe AX2.2 is dual-drilled for 6x135 and 6x139.7 (6x5.5) bolt patterns, covering two of the most common six-lug truck platforms in a single wheel. The 6x135 pattern fits the Ford F-150 (2004-2026), Ford Expedition (2003-2027), Lincoln Navigator (2003-2027), Ford F-150 Lightning (2022-2026), and Ford Bronco (2022-2026), with one additional verified platform in the fitment universe. The 6x139.7 pattern opens the wheel to GM 1500 trucks and SUVs, including the Silverado 1500, Sierra 1500, Tahoe, Suburban, Yukon, and Escalade, as well as Nissan Titan and Armada, Toyota Tundra (pre-2007), and similar applications. The 106.10mm hub bore fits across these platforms.\u003c\/p\u003e\u003cp\u003eOffset and Stance at -76mm\u003c\/p\u003e\u003cp\u003eA -76mm offset places the mounting surface well rearward of the wheel's centerline, pushing the face and barrel outboard from the hub. On a 14-inch-wide wheel, that combination produces an aggressive outboard position that commits to a wide track. This is a fitment for builds running lift kits where fender clearance has been opened up to accommodate the width and outboard positioning. Rivets accent the face, adding another layer of detail to the overall look. The AX2.2 is also offered in additional sizes, widths, finishes, and bolt-pattern options across the lineup for builds with different fitment targets.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x135 \/ 6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-76 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.51\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eRed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eRotary Forged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e51 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Axe Offroad","offers":[{"title":"Default Title","offer_id":68713003319577,"sku":"241412H-76AX2RM","price":720.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/ax2.2_red_white__61047.jpg?v=1794772245"},{"product_id":"22x12-white-wheel-ax2-3-8x170-44-22128170-44ax2wm","title":"AX2.3 White | 22x12 | 8x170 -44mm Offset | 22128170-44AX2WM","description":"\u003cp\u003eBuilt for Ford Super Duty Platforms\u003c\/p\u003e\u003cp\u003eThe Ford F-250 and F-350 Super Duty (1999-2026) own the 8x170 bolt pattern, and the Axe Offroad AX2.3 is sized and drilled specifically for that platform. At 22x12 with a -44mm offset, the mounting surface sits well rearward of the wheel's centerline, pushing the wheel outward for an aggressive, wide-stance look that suits lifted Super Duty builds. The 125.2mm hub bore fits these Ford platforms, and the 3,200-lb load rating supports the payload and towing demands that come with heavy-duty truck ownership. Backspacing measures 4.77 inches. One additional verified fit exists beyond the F-250 and F-350.\u003c\/p\u003e\u003cp\u003eSplit Eight-Spoke Mesh Design\u003c\/p\u003e\u003cp\u003eThe AX2.3 runs a split eight-spoke mesh layout across the face, with each spoke pair branching outward from the hub toward the outer barrel. Milled spoke windows open up the face between the spokes, cutting through the gloss white surface to expose the raw aluminum beneath and creating a sharp two-tone contrast that gives the wheel visual depth. Rivets accent the face, adding a hardware-forward detail that fits the aggressive character of the design. Lug hardware sits exposed around the hub bore, visible on the face as part of the wheel's intentional look. A center cap is included.\u003c\/p\u003e\u003cp\u003eOne-Piece Cast Alloy Construction\u003c\/p\u003e\u003cp\u003eAxe Offroad's UK-rooted design sensibility shows in how the AX2.3 balances visual complexity with structural reliability. Cast one-piece alloy construction supports the deep spoke geometry and milled window detailing in a single continuous form, keeping the design intact through load cycles without the added complexity of multi-piece assembly. At 45 lbs, this wheel comes in at a competitive weight for a 22-inch cast alloy wheel of this width, sitting below the typical range for this class. The one-piece build also means there are no seams or hardware joints to maintain over time.\u003c\/p\u003e\u003cp\u003eGloss White Finish with Milled Accents\u003c\/p\u003e\u003cp\u003eThe gloss white finish covers the face, spokes, and barrel in a clean, high-contrast surface that stands out against dark fenders and body panels. The milled spoke windows cut through the white to the bare aluminum, creating a bright contrast detail that keeps the wheel from reading as a single flat color. This finish combination suits lifted Super Duty builds where the wheel needs to hold its own against larger tires and raised ride height. The AX2.3 is also offered in additional sizes, widths, and finish options across the lineup for builds with different fitment needs.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e8x170\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-44 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.77\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e125.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e3200 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e45 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Axe Offroad","offers":[{"title":"Default Title","offer_id":68713003712793,"sku":"22128170-44AX2WM","price":900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/ax2.3_white_white__97896.jpg?v=1794772246"},{"product_id":"22x10-brushed-wheel-ax2-4-5x5-5x5-5-19-221010h-19ax2kb","title":"AX2.4 Brushed | 22x10 | 5x5\/5x5.5 -19mm Offset | 221010H-19AX2KB","description":"\u003cp\u003eBrushed Carbon Finish with Milled Spoke Edges\u003c\/p\u003e\u003cp\u003eThe Axe Offroad AX2.4 arrives in a Brushed Carbon finish with milled spoke edges that cut a bright contrast against the darker brushed surface. The milled treatment runs along the edges of each spoke, giving the face a two-tone depth without adding chrome or paint. Lug hardware sits exposed around the hub bore, visible on the face and adding a hardware-forward look that suits the AX2.4's aggressive character. Rivets accent the design as well, reinforcing the bold, purposeful aesthetic Axe Offroad brings from its UK-rooted design sensibility applied to truck and SUV builds. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eSplit Eight-Spoke Mesh Design\u003c\/p\u003e\u003cp\u003eThe AX2.4 runs a split eight-spoke mesh layout across the face. Each spoke divides as it moves outward from the hub, creating the layered, interlocking geometry that defines the mesh style. The design has visual weight without closing off the face entirely, and the milled spoke edges keep the detail sharp across the full 22-inch diameter. At 10 inches wide, the barrel gives the face room to fill out proportionally at this diameter.\u003c\/p\u003e\u003cp\u003eDual-Drilled for 5x127 and 5x139.7 Platforms\u003c\/p\u003e\u003cp\u003eThis wheel is dual-drilled to cover two distinct bolt-pattern groups. The 5x127 (5x5) pattern fits Jeep Wrangler JK and Grand Cherokee applications, Ram 1500 trucks from the pre-2019 generation, and older Chevrolet half-ton platforms. The 5x139.7 (5x5.5) pattern opens fitment to older Ford F-150, Bronco, and E-Series trucks, pre-2002 Dodge Ram 1500, Jeep Wagoneer and Cherokee XJ, and similar classic 5-lug truck platforms. The 87.10mm hub bore fits both bolt-pattern groups across these applications. Verified fitment covers 32 platforms in total, including Jeep Wrangler (2007-2026), Jeep Grand Cherokee (1999-2026), Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), GMC Yukon (1992-1999), and 10 additional verified platforms.\u003c\/p\u003e\u003cp\u003eOffset, Width, and Stance\u003c\/p\u003e\u003cp\u003eAt -19mm offset, the mounting surface sits rearward of the wheel's centerline, pushing the face outboard from the hub. Combined with the 10-inch width, this positions the AX2.4 for an aggressive outboard stance that steps noticeably beyond stock positioning. Backspacing measures 4.75 inches. The 2,600-lb load rating covers full-size truck and SUV applications across the verified platform list.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eThe AX2.4 is built as a one-piece alloy wheel, forming the face, barrel, and hub from a single continuous casting. At 45 lbs, the wheel comes in close to the typical weight for a 22-inch alloy truck wheel in this class. The AX2.4 is also offered in additional sizes, widths, and finishes across the lineup for builds with different fitment targets.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127 \/ 5x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-19 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.75\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBrushed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e45 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Axe Offroad","offers":[{"title":"Default Title","offer_id":68713004073241,"sku":"221010H-19AX2KB","price":675.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/ax2.4_brushed_white__92218.jpg?v=1794772248"},{"product_id":"24x14-brushed-wheel-ax2-4-6x135-6x5-5-76-241412h-76ax2kb","title":"AX2.4 Brushed | 24x14 | 6x135\/6x5.5 -76mm Offset | 241412H-76AX2KB","description":"\u003cp\u003eDual-Drilled for Ford and GM Platforms\u003c\/p\u003e\u003cp\u003eThe Axe Offroad AX2.4 is a 24-inch, 14-inch-wide one-piece alloy wheel drilled for both 6x135 and 6x139.7 (6x5.5) bolt patterns, opening it up to a wide range of full-size truck applications. The 6x135 pattern fits the Ford F-150 (2004-2026), Ford Expedition (2003-2027), Lincoln Navigator (2003-2027), Ford F-150 Lightning (2022-2026), and Ford Bronco (2022-2026), with one additional verified platform in the fitment universe. The 6x139.7 pattern covers GM 1500 trucks and SUVs, including the Silverado 1500, Sierra 1500, Tahoe, Suburban, Yukon, and Escalade, as well as Nissan Titan, Toyota Tundra, and similar 6-lug truck platforms. The 106.10mm hub bore fits both bolt-pattern groups. Backspacing is 4.51 inches.\u003c\/p\u003e\u003cp\u003eBrushed Carbon Finish with Milled Spoke Edges\u003c\/p\u003e\u003cp\u003eThe finish is Brushed Carbon with milled spoke edges. The brushed carbon surface gives the wheel a dark, textured appearance, while the milled edges along each spoke introduce a brighter contrast line that traces the spoke geometry. The result is a two-tone effect that comes from the material itself rather than paint, keeping the look tied to the wheel's structure. Rivets are present on the wheel, adding a hardware-forward detail to the face.\u003c\/p\u003e\u003cp\u003eSplit Eight-Spoke Mesh Design\u003c\/p\u003e\u003cp\u003eThe AX2.4 uses a split eight-spoke mesh layout. Each spoke divides as it moves outward from the hub, creating the interlocking mesh pattern that fills the face. Lug hardware is exposed and visible on the face, sitting in a circle around the hub bore where the wheel mounts to the vehicle. A center cap is included with this wheel, covering the hub area when installed. The wheel has a visible outer lip that adds depth to the profile at 24 inches in diameter.\u003c\/p\u003e\u003cp\u003eOffset and Stance at This Width\u003c\/p\u003e\u003cp\u003eAt -76mm, the mounting surface sits well rearward of the wheel's centerline, pushing the face and barrel outward from the hub. On a 14-inch-wide wheel, this offset places the wheel significantly outboard, which is an aggressive outward position relative to the fender. This combination of width and negative offset is built for trucks running lift kits where additional clearance and a wide track are part of the build intent. The 2,600-lb load rating is rated for full-size truck use.\u003c\/p\u003e\u003cp\u003eSize and Weight\u003c\/p\u003e\u003cp\u003eAt 24 inches in diameter, the AX2.4 sits in show-wheel territory, making a strong visual statement on any full-size truck build. The wheel weighs 51 lbs, consistent with what you'd expect from a 24-inch alloy at this width. The AX2.4 is also offered in additional sizes, widths, and finishes across the lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x135 \/ 6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-76 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.51\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBrushed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e51 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Axe Offroad","offers":[{"title":"Default Title","offer_id":68713004433689,"sku":"241412H-76AX2KB","price":900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/ax2.4_brushed_white__54505.jpg?v=1794772249"},{"product_id":"22x12-polished-wheel-ax2-5-5x5-5x5-5-44-221210h-44ax2fp","title":"AX2.5 Polished | 22x12 | 5x5\/5x5.5 -44mm Offset | 221210h-44AX2FP","description":"\u003cp\u003eDual-Drilled for Jeep and Classic Truck Platforms\u003c\/p\u003e\u003cp\u003eJeep Wrangler (2007-2026) and Grand Cherokee (1999-2026) owners running the 5x127 (5x5) bolt pattern get a wheel sized for lifted builds, and the AX2.5 delivers that in a 22x12 polished alloy package. The secondary 5x139.7 (5x5.5) pattern opens fitment to classic Ford F-150 and Bronco platforms, older Dodge Ram 1500 (pre-2002), Jeep Wagoneer and Cherokee XJ, and similar classic 5-lug truck applications. Across both patterns, the 87.1mm hub bore fits these platforms. The 2,600-lb load rating supports the demands of full-size truck and SUV use. In total, this wheel covers 32 verified fitment applications, including the Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), among 10 additional verified platforms beyond those listed here.\u003c\/p\u003e\u003cp\u003eSplit Eight-Spoke Mesh Design\u003c\/p\u003e\u003cp\u003eThe AX2.5 runs a split eight-spoke mesh layout across the face, with each spoke dividing as it moves outward from the hub toward the outer edge. The mesh geometry creates visual depth and an open, layered look that suits lifted Jeep and truck builds. Rivets accent the face, adding a hardware-forward detail consistent with Axe Offroad's aggressive off-road design language. Lug hardware sits exposed around the hub bore, visible on the face and contributing to the purposeful, mechanical character of the wheel. The polished finish brings a bright, reflective surface across the entire face and barrel, making the spoke geometry and rivet detail stand out clearly against the wheel's profile.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eAxe Offroad builds the AX2.5 as a one-piece alloy wheel, a construction that supports the complex split-spoke mesh geometry from hub to outer edge in a single continuous form. Cast alloy handles the undercuts and layered spoke profiles this design demands, and the one-piece structure keeps the wheel's proportions consistent across the full 12-inch barrel. At 45 lbs, this wheel comes in close to the typical weight for a 22-inch alloy truck wheel in this width class. A center cap is included.\u003c\/p\u003e\u003cp\u003eOffset and Stance at -44mm\u003c\/p\u003e\u003cp\u003eAt -44mm, the mounting surface sits well rearward of the wheel's centerline, pushing the face outward for an aggressive, wide-track stance. On a 12-inch-wide barrel, that combination qualifies as a genuinely outboard wheel position: the face and spokes sit prominently outside the fender plane on lifted builds running appropriate clearance. The 4.77 inches of backspacing reflects that outboard bias. This is a wheel sized and offset for builds that want presence, and the dual-drilled pattern means it serves that purpose across both the Jeep 5x127 universe and the classic 5x139.7 truck platform group.\u003c\/p\u003e\u003cp\u003eAdditional Configurations Available\u003c\/p\u003e\u003cp\u003eThe AX2.5 is also offered in additional sizes, widths, and finishes beyond this polished 22x12 setup, covering a range of bolt-pattern groups for buyers who need a different fit within the lineup.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127 \/ 5x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-44 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.77\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePolished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e45 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Axe Offroad","offers":[{"title":"Default Title","offer_id":68713004957977,"sku":"221210h-44AX2FP","price":740.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/ax2.5_polished_white__94167.jpg?v=1794772250"},{"product_id":"24x14-polished-wheel-ax2-5-5x5-5x5-5-76-241410h-76axfp","title":"AX2.5 Polished | 24x14 | 5x5\/5x5.5 -76mm Offset | 241410H-76AXFP","description":"\u003cp\u003eA Bold 24-Inch Statement in Polished Alloy\u003c\/p\u003e\u003cp\u003eThe Axe Offroad AX2.5 arrives in a 24x14 format with a full polished finish and a -76mm offset that pushes the mounting surface deep behind the wheel's centerline, positioning the face well outboard for a wide, aggressive stance. At 14 inches wide with a -76mm offset, this is a wheel built for builds that commit to presence: the outboard positioning is substantial, and the proportions are sized for trucks and SUVs running lift kits to clear the added width. Backspacing measures 4.51 inches. The 87.10mm hub bore fits both 5x127 (5x5) and 5x139.7 (5x5.5) platforms.\u003c\/p\u003e\u003cp\u003eSplit Eight-Spoke Mesh Design\u003c\/p\u003e\u003cp\u003eThe AX2.5 runs a split eight-spoke mesh layout across the face. Each spoke divides as it extends outward from the hub, creating the layered, interwoven look that defines the mesh style. The full polished finish covers the entire wheel, giving the face, spokes, and barrel a bright, mirror-like appearance that holds its character across the full 24-inch diameter. At this size, the AX2.5 is a show-oriented wheel: the diameter and finish are calibrated for visual impact. Rivets accent the face, and the lug hardware sits exposed around the hub bore, visible on the face in a circle at the center of the wheel. A center cap is included.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eThe AX2.5 is a one-piece alloy wheel, formed as a single continuous unit without welded joints or assembled sections. This construction keeps the structure unified across the face and barrel. The wheel carries a 2,600-lb load rating and weighs 51 lbs, consistent with a 24-inch alloy wheel of this width.\u003c\/p\u003e\u003cp\u003eFitment for 5x127 and 5x139.7 Platforms\u003c\/p\u003e\u003cp\u003eThe AX2.5 is dual-drilled, covering both the 5x127 (5x5) and 5x139.7 (5x5.5) bolt patterns in a single wheel. The 5x127 pattern fits Jeep Wrangler JK through current generation (2007-2026), Jeep Grand Cherokee (1999-2026), and older GM half-ton platforms including the Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999). The 5x139.7 pattern covers older Ford F-150 and Bronco applications, pre-2002 Dodge Ram 1500, Jeep Wagoneer and Cherokee XJ, and similar classic 5-lug truck platforms. Across both patterns, there are 32 verified fitment applications. The AX2.5 is also offered in additional sizes, widths, and finishes across the lineup for builds with different fitment targets.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127 \/ 5x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-76 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.51\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePolished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e51 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Axe Offroad","offers":[{"title":"Default Title","offer_id":68713005383961,"sku":"241410H-76AXFP","price":800.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/ax2.5_polished_white__19543.jpg?v=1794772251"},{"product_id":"22x10-polished-wheel-ax2-5-6x135-6x5-5-19-221012h-19ax2fp","title":"AX2.5 Polished | 22x10 | 6x135\/6x5.5 -19mm Offset | 221012H-19AX2FP","description":"\u003cp\u003eFord and GM Full-Size Fitment in One Wheel\u003c\/p\u003e\u003cp\u003eThe Axe Offroad AX2.5 is a dual-drilled 22x10 wheel covering two of the most popular 6-lug truck bolt patterns on the market: 6x135 and 6x139.7 (6x5.5). The 6x135 pattern fits the Ford F-150 (2004-2026), Ford Expedition (2003-2027), Lincoln Navigator (2003-2027), Ford F-150 Lightning (2022-2026), and Ford Bronco (2022-2026), among one additional verified platform. The 6x139.7 pattern opens the AX2.5 to GM full-size trucks and SUVs, including the Chevrolet Silverado 1500, GMC Sierra 1500, Tahoe, Suburban, Yukon, and Escalade, as well as Toyota Tundra, 4Runner, Sequoia, Nissan Titan, and similar applications. The 106.10mm hub bore fits these platforms across both bolt-pattern groups.\u003c\/p\u003e\u003cp\u003eSplit Eight-Spoke Mesh Design\u003c\/p\u003e\u003cp\u003eAxe Offroad's UK-rooted design sensibility comes through clearly on the AX2.5. The face runs a split eight-spoke mesh pattern, where each spoke divides as it moves outward from the hub, creating a dense, layered look that suits aggressive truck builds. Rivets accent the design, adding a hardware-forward detail that reinforces the off-road character. Lug hardware is exposed and visible on the face, sitting in a circle around the hub bore where the wheel mounts to the vehicle, making the mounting hardware part of the visual statement rather than hiding it behind a cap. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003ePolished Alloy, One-Piece Construction\u003c\/p\u003e\u003cp\u003eThe AX2.5 is cast in one-piece alloy with a full polished finish across the face and barrel. Cast construction supports the complex mesh geometry of the split-spoke design, holding the layered spoke profile and outer lip in a single continuous form. The polished finish brings a high-reflective, bright surface that stands out against dark body panels and complements chrome or stainless trim. At 60 lbs, the weight reflects the 22-inch diameter, 10-inch width, and the structural demands of a 2,600-lb load rating on a full-size truck platform. Backspacing measures 4.75 inches.\u003c\/p\u003e\u003cp\u003eOffset and Stance on 6x135 and 6x139.7 Platforms\u003c\/p\u003e\u003cp\u003eAt -19mm offset, the AX2.5's mounting surface sits rearward of the wheel's centerline, pushing the face outward for a more aggressive, outboard wheel position than stock. On a 10-inch-wide barrel with a -19mm offset, this combination qualifies as a genuinely wide stance: the wheel pushes noticeably beyond the fender plane on most full-size truck applications, and the look is most at home on builds running a leveling kit or lift kit where fender clearance supports the outboard position. The AX2.5 is also offered in additional sizes, widths, and finishes across the lineup for builds with different fitment targets.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x135 \/ 6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-19 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.75\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePolished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e60 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Axe Offroad","offers":[{"title":"Default Title","offer_id":68713005711641,"sku":"221012H-19AX2FP","price":675.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/ax2.5_polished_white__58812.jpg?v=1794772252"},{"product_id":"22x12-black-milled-wheel-ax3-0-5x5-5x5-5-44-221210h-44ax3bm","title":"AX3.0 Black Milled | 22x12 | 5x5\/5x5.5 -44mm Offset | 221210H-44AX3BM","description":"\u003cp\u003eSplit Seven-Spoke Design with Milled Windows\u003c\/p\u003e\u003cp\u003eThe Axe Offroad AX3.0 is a 22x12 one-piece rotary forged wheel finished in gloss black with milled spoke windows. Seven split spokes radiate from the hub, and each spoke window is milled to open up the face with a bright contrast against the gloss black surfaces. Rivets accent the design, and the exposed lug hardware sits in a circle around the hub bore, keeping the mounting hardware visible as part of the overall look. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eRotary Forged Construction\u003c\/p\u003e\u003cp\u003eThe AX3.0 is built using a rotary forging process: the cast aluminum barrel is heated and then spun under pressure, which refines and densifies the grain structure of the aluminum. That spinning step is what separates rotary forged construction from standard low-pressure casting, producing a barrel with greater structural integrity at a given wall thickness. The result is a one-piece wheel that weighs 45 lbs in this 22x12 size, which falls within the expected range for rotary forged truck wheels at this diameter and width.\u003c\/p\u003e\u003cp\u003eOffset and Stance at 22x12 -44mm\u003c\/p\u003e\u003cp\u003eAt -44mm offset, the mounting surface sits well rearward of the wheel's centerline, pushing the face outboard from the hub. Combined with the 12-inch width, this wheel meets the threshold for aggressive outboard positioning: the face and spokes will sit noticeably outside the hub plane, giving the truck a wider visual track. Backspacing measures 4.77 inches. This is a wheel sized and offset for builds running leveling kits or lift kits where fender clearance has been opened up.\u003c\/p\u003e\u003cp\u003eDual-Drilled for 5x127 and 5x139.7 Platforms\u003c\/p\u003e\u003cp\u003eThe AX3.0 is dual-drilled to fit both 5x127 (5x5) and 5x139.7 (5x5.5) bolt patterns, covering a wide range of truck and SUV platforms. The 5x127 pattern fits Jeep Wrangler JK and JL generations (2007-2026), Jeep Grand Cherokee (1999-2026), and pre-2019 Ram 1500 applications, among others. The 5x139.7 pattern covers older Ford F-150, classic Bronco, Jeep Wagoneer and Cherokee XJ, and similar classic 5-lug truck platforms. The 87.10mm hub bore fits these bolt-pattern platforms. Verified fitment includes the Jeep Wrangler (2007-2026), Jeep Grand Cherokee (1999-2026), Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), GMC Yukon (1992-1999), and 10 additional verified platforms across 32 total fitments.\u003c\/p\u003e\u003cp\u003eAvailable Across the AX3.0 Lineup\u003c\/p\u003e\u003cp\u003eThe AX3.0 is offered in additional sizes, widths, offsets, and finish options beyond this 22x12 gloss black with milled spoke windows setup, with both 6-lug and 5-lug bolt patterns available across the lineup to cover a broader range of truck and SUV applications.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127 \/ 5x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-44 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.77\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack Milled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eRotary Forged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e45 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Axe Offroad","offers":[{"title":"Default Title","offer_id":68713006137625,"sku":"221210H-44AX3BM","price":700.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/ax3.0_blackmilled_white__10018.jpg?v=1794772254"},{"product_id":"22x12-silver-wheel-ax3-1-5x5-5x5-5-44-221210h-44ax3sm","title":"AX3.1 Silver | 22x12 | 5x5\/5x5.5 -44mm Offset | 221210H-44AX3SM","description":"\u003cp\u003eSplit Seven-Spoke Silver with Brushed Accents\u003c\/p\u003e\u003cp\u003eThe Axe Offroad AX3.1 arrives in a 22x12 format with a silver finish and brushed spoke accents that add contrast across the face. The seven split spokes radiate from the hub with a clean separation between each pair, and the brushed treatment on the spoke surfaces sets them apart from the surrounding silver areas. Rivets sit on the face near the hub, adding a detail that suits the AX3.1's off-road character. Lug hardware is exposed and visible around the hub bore, keeping the mounting hardware as part of the visual presentation rather than hiding it behind a cap. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eRotary Forged Construction at 22 Inches\u003c\/p\u003e\u003cp\u003eThe AX3.1 is a one-piece rotary forged wheel. In this process, the cast aluminum barrel is heated and then spun under pressure, which refines and densifies the grain structure of the aluminum for a stronger barrel than low-pressure casting alone produces. At 45 lbs for a 22-inch, 12-inch-wide wheel, the weight is in line with what this class and width demand. The 2,600-lb load rating supports truck and SUV applications across the platforms this wheel fits.\u003c\/p\u003e\u003cp\u003eOffset and Stance at -44mm\u003c\/p\u003e\u003cp\u003eAt -44mm, the mounting surface sits well rearward of the wheel's centerline, pushing the face outboard from the hub. On a 12-inch-wide barrel, that combination places the wheel significantly outside the stock track, giving the build a wider, more aggressive stance. The 4.77 inches of backspacing and 8.23 inches of frontspacing reflect how the barrel distributes across the hub face. This is a wheel sized and offset for builds that want real outboard presence.\u003c\/p\u003e\u003cp\u003eDual-Drilled for 5x127 and 5x139.7 Platforms\u003c\/p\u003e\u003cp\u003eThe AX3.1 is dual-drilled, covering both the 5x127 (5x5) and 5x139.7 (5x5.5) bolt patterns. The 5x127 pattern fits platforms like the Jeep Wrangler JK and Grand Cherokee, along with pre-2019 Ram 1500 and older Chevy half-ton trucks. The 5x139.7 pattern covers older Ford F-150, Bronco, and E-Series applications, pre-2002 Dodge Ram 1500, Jeep Wagoneer and Cherokee XJ, and similar classic 5-lug truck platforms. The 87.10mm hub bore fits both bolt-pattern groups. Verified fitment includes the Jeep Wrangler (2007-2026), Jeep Grand Cherokee (1999-2026), Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), among 15 additional verified platforms. The AX3.1 is also offered in additional sizes, widths, and finishes across the lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127 \/ 5x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-44 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.77\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSilver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eRotary Forged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e45 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Axe Offroad","offers":[{"title":"Default Title","offer_id":68713006498073,"sku":"221210H-44AX3SM","price":740.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/ax3.1_silver_white__27292.jpg?v=1794772255"},{"product_id":"22x12-black-milled-wheel-ax4-0-5x5-5x5-5-44-221210h-44ax4bm","title":"AX4.0 Black Milled | 22x12 | 5x5\/5x5.5 -44mm Offset | 221210H-44AX4BM","description":"\u003cp\u003eSplit Eight-Spoke Design with Milled Accents\u003c\/p\u003e\u003cp\u003eThe Axe Offroad AX4.0 is a 22x12 wheel finished in gloss black with milled spoke windows and accents. Eight split spokes radiate from the hub, and the milling opens up the face with contrast detailing that breaks up the gloss black surface without adding chrome or polished elements. Rivets sit on the wheel face, adding a hardware-forward look that suits the AX4.0's off-road character. Lug hardware is exposed and visible around the hub bore, keeping the mounting hardware as part of the face's visual statement rather than hiding it behind a cap. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eRotary Forged Construction\u003c\/p\u003e\u003cp\u003eThe AX4.0 is built as a one-piece rotary forged wheel. In this process, the cast aluminum barrel is heated and spun under pressure, which refines and densifies the grain structure of the aluminum for a stronger barrel than low-pressure casting alone produces. The spinning step is what separates rotary forging from standard casting, and it's why the barrel can handle the lateral and impact loads that come with larger tire sizes and off-road use. At 45 lbs for a 22-inch, 12-inch-wide wheel, the weight reflects the wide barrel and the structural demands of this size class. The 2,600-lb load rating supports full-size truck and SUV applications.\u003c\/p\u003e\u003cp\u003eOffset and Fitment Geometry\u003c\/p\u003e\u003cp\u003eThe -44mm offset places the mounting surface well rearward of the wheel's centerline, pushing the face outboard from the hub. On a 12-inch-wide barrel, that combination produces a stance that sits noticeably wider than stock. Backspacing measures 4.77 inches. The 87.1mm hub bore fits the 5x127 (5x5) and 5x139.7 (5x5.5) bolt patterns this wheel is drilled for.\u003c\/p\u003e\u003cp\u003eDual-Drilled for 5x127 and 5x139.7 Platforms\u003c\/p\u003e\u003cp\u003eThe AX4.0 is dual-drilled, covering two distinct bolt-pattern groups in a single wheel. The 5x127 (5x5) pattern fits platforms including the Jeep Wrangler (2007-2026), Jeep Grand Cherokee (1999-2026), and Chevrolet Tahoe (1995-1999), among others. The 5x139.7 (5x5.5) pattern extends fitment to classic 5-lug truck platforms including older Ford F-150, Jeep Cherokee XJ, and Dodge Ram 1500 (pre-2002) applications. Verified fitment covers 32 platforms across both bolt-pattern groups, including the Chevrolet C1500 (1988-1999) and GMC Yukon (1992-1999). The AX4.0 is also offered in additional sizes, widths, and finish options across the lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127 \/ 5x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-44 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.77\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack Milled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eRotary Forged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e45 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Axe Offroad","offers":[{"title":"Default Title","offer_id":68713006858521,"sku":"221210H-44AX4BM","price":700.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/ax4.0_blackmilled_white__58584.jpg?v=1794772256"},{"product_id":"22x12-black-milled-wheel-ax5-0-5x5-5x5-5-44-221210h-44ax5bm","title":"AX5.0 Black Milled | 22x12 | 5x5\/5x5.5 -44mm Offset | 221210H-44AX5BM","description":"\u003cp\u003eDual-Pattern Fitment for Jeep and Classic Truck Platforms\u003c\/p\u003e\u003cp\u003eJeep Wrangler (2007-2026) and Grand Cherokee (1999-2026) owners running the 5x127 (5x5) bolt pattern get a wheel sized for lifted builds, and the AX5.0 delivers exactly that. The 5x139.7 (5x5.5) drilling opens the same wheel to classic Ford F-150, Bronco, E-Series, early Dodge Ram 1500, Jeep Wagoneer, Cherokee XJ, and similar legacy 5-lug truck platforms. Verified across 32 fitment applications, the AX5.0 also fits Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), GMC Yukon (1992-1999), and 10 additional verified platforms beyond those listed here.\u003c\/p\u003e\u003cp\u003eSplit Five-Spoke Mesh Design with Milled Accents\u003c\/p\u003e\u003cp\u003eThe AX5.0 runs a split five-spoke mesh layout, with each spoke branching outward from the hub in a tight, interlocking pattern that gives the face visual density without closing it off. The finish is gloss black with milled spoke accents: the black surfaces hold a deep, clean tone while the milled areas catch contrast across the face, sharpening the geometry of each spoke. Lug hardware sits exposed around the hub bore, visible on the face and adding a purposeful, hardware-forward look that suits the AX5.0's off-road character. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eAxe Offroad builds the AX5.0 as a one-piece alloy wheel, a construction that suits the complex mesh spoke geometry well. Cast molds support the interlocking spoke structure and the contoured face detail in a single continuous shape, keeping the design intact through the load cycles a lifted truck or Jeep puts on its wheels. At 45 lbs, the AX5.0 comes in close to the typical weight for a 22-inch alloy wheel in this class. The 2,600-lb load rating and 4.77 inches of backspacing round out the structural profile.\u003c\/p\u003e\u003cp\u003eOffset and Stance at 22x12 with -44mm\u003c\/p\u003e\u003cp\u003eAt 22 inches in diameter and 12 inches wide with a -44mm offset, the mounting surface sits well rearward of the wheel's centerline, pushing the barrel outward for an aggressive, wide-stance look. This combination of 12-inch width and -44mm offset qualifies as genuinely outboard fitment: the wheel positions itself with poke and presence that suits lifted Jeep and truck builds where fender clearance has been opened up. The 87.1mm hub bore fits the 5x127 and 5x139.7 platforms this wheel is drilled for.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127 \/ 5x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-44 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.77\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack Milled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e45 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Axe Offroad","offers":[{"title":"Default Title","offer_id":68713007218969,"sku":"221210H-44AX5BM","price":700.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/ax5.0_blackmilled_white__75428.jpg?v=1794772257"},{"product_id":"24x12-black-milled-wheel-ax5-0-8x6-5-44-24128165-44ax5bm","title":"AX5.0 Black Milled | 24x12 | 8x6.5 -44mm Offset | 24128165-44AX5BM","description":"\u003cp\u003eHeavy-Duty Fitment on an 8x165.1 Pattern\u003c\/p\u003e\u003cp\u003eRam 2500 and 3500 owners, along with Chevrolet Silverado 2500 HD and GMC Sierra 2500 HD drivers, make up the core fitment universe for the Axe Offroad AX5.0. This 8x165.1 (8x6.5) bolt pattern covers Ram 2500 models from 1994 through 2027, Silverado 2500 HD and Sierra 2500 HD from 2001 to 2010, and Dodge Ram 1500 from 2006 to 2008, with 10 additional verified platforms rounding out a 99-application fitment list. The 125.20mm hub bore fits these heavy-duty platforms, and the 3,500-lb load rating is built for the demands of full-size HD truck use.\u003c\/p\u003e\u003cp\u003eSplit Five-Spoke Mesh Design\u003c\/p\u003e\u003cp\u003eThe AX5.0 runs a split five-spoke mesh layout that gives the face an open, layered look with visual depth across the full 24-inch diameter. Each of the five split spokes fans outward from the hub in a mesh pattern, creating a busy, aggressive face that suits lifted HD truck builds. Exposed lug hardware sits in a circle around the hub bore at the center of the face, keeping the mounting hardware visible as part of the design rather than hidden behind a cap. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eGloss Black with Milled Spoke Accents\u003c\/p\u003e\u003cp\u003eThe finish is gloss black across the face and barrel, with milled accents cut into the spoke surfaces to reveal the raw aluminum beneath. That contrast between the deep gloss black and the bright milled lines gives the AX5.0 a two-tone look that holds up well against the scale of a 24-inch diameter. At 24 inches, this wheel carries the visual presence of a show-oriented piece while still meeting the load and fitment specs HD truck platforms require. Backspacing measures 4.77 inches.\u003c\/p\u003e\u003cp\u003eAggressive Offset for a Wide Stance\u003c\/p\u003e\u003cp\u003eAt -44mm on a 12-inch-wide barrel, the AX5.0 places the mounting surface well rearward of the wheel's centerline, pushing the wheel outward for a wide, aggressive stance. This combination of 12-inch width and -44mm offset qualifies as a genuinely outboard setup, with the wheel face sitting noticeably outside the fender line on lifted builds. The 51-lb weight is in line with what a one-piece alloy wheel of this size and width typically runs.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eAxe Offroad builds the AX5.0 as a one-piece alloy wheel, a construction that supports the complex split-spoke mesh geometry across the full face without seams or assembly points. One-piece alloy casting allows the deep spoke profile and milled accent surfaces to be formed as a continuous shape, keeping the design's geometry intact through every load cycle. The AX5.0 is also offered in additional sizes and finishes across the lineup for builds with different fitment targets.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e8x165.1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-44 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.77\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e125.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack Milled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e3500 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e51 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Axe Offroad","offers":[{"title":"Default Title","offer_id":68713007677721,"sku":"24128165-44AX5BM","price":840.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/ax5.0_blackmilled_white__25472.jpg?v=1794772258"},{"product_id":"22x12-silver-wheel-ax5-1-5x5-5x5-5-44-221210h-44ax5sm","title":"AX5.1 Silver | 22x12 | 5x5\/5x5.5 -44mm Offset | 221210H-44AX5SM","description":"\u003cp\u003eDual-Pattern Fitment for Classic and Modern Truck Platforms\u003c\/p\u003e\u003cp\u003eThe Axe Offroad AX5.1 is a 22x12 one-piece alloy wheel in a Brushed Silver finish with a mirror machined lip, drilled for both 5x127 (5x5) and 5x139.7 (5x5.5) bolt patterns. That dual-pattern drilling opens the AX5.1 to a wide range of platforms: the 5x127 pattern covers Jeep Wrangler (2007-2026), Jeep Grand Cherokee (1999-2026), and older GM half-ton platforms including the Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), among 32 verified fits total. The 5x139.7 pattern extends coverage to older Ford F-150 and Bronco applications, pre-2002 Dodge Ram 1500, Jeep Cherokee XJ and Wagoneer, and similar classic 5-lug truck and SUV platforms. The 87.10mm hub bore fits across these 5x127 and 5x139.7 applications.\u003c\/p\u003e\u003cp\u003eSplit Five-Spoke Mesh Design\u003c\/p\u003e\u003cp\u003eAxe Offroad's UK-rooted design sensibility shows in the AX5.1's split five-spoke mesh layout: each of the five spokes divides into a tighter mesh pattern as it moves outward from the hub, giving the face visual complexity without cluttering the profile. The brushed silver surfaces carry a textured, directional sheen, while the mirror machined lip adds a bright contrast ring around the outer edge. Lug hardware sits exposed on the face around the hub bore, keeping the mounting hardware visible as part of the wheel's overall look. A center cap is included.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eCast aluminum one-piece construction gives the AX5.1 the structural depth to carry the mesh spoke geometry cleanly from hub to barrel. The single-piece form holds the split-spoke profile in a continuous shape, and cast molds support the undercuts and contoured transitions that a mesh design like this demands. The 2,600-lb load rating supports the truck and SUV platforms this wheel targets. At 45 lbs, the AX5.1 comes in close to the typical weight for a 22-inch alloy wheel at this width.\u003c\/p\u003e\u003cp\u003eOffset and Stance\u003c\/p\u003e\u003cp\u003eAt -44mm, the mounting surface sits well rearward of the wheel's centerline, pushing the wheel outward for an aggressive, wide stance. On a 12-inch-wide barrel, that combination qualifies as genuinely outboard positioning: the wheel will poke noticeably beyond the fender plane on most builds, and a lift kit is the natural pairing to open up clearance and let the stance land the way it was intended. Backspacing measures 4.77 inches. The AX5.1 is also offered in additional sizes, widths, and finishes across the lineup for builds with different fitment targets.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127 \/ 5x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-44 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.77\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSilver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e45 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Axe Offroad","offers":[{"title":"Default Title","offer_id":68713008070937,"sku":"221210H-44AX5SM","price":740.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/ax5.1_silver_white__33147.jpg?v=1794772259"},{"product_id":"24x12-silver-wheel-ax5-1-6x135-6x5-5-44-241212h-44ax5sm","title":"AX5.1 Silver | 24x12 | 6x135\/6x5.5 -44mm Offset | 241212H-44AX5SM","description":"\u003cp\u003eFord and GM Truck Fitment in One Wheel\u003c\/p\u003e\u003cp\u003eThe Axe Offroad AX5.1 is dual-drilled for both 6x135 and 6x139.7 (6x5.5) bolt patterns, covering Ford F-150, Expedition, Navigator, F-150 Lightning, and Bronco (2003-2027 depending on model), plus one additional verified platform, alongside the full range of 6x139.7 applications including Chevy Silverado 1500, GMC Sierra 1500, Tahoe, Suburban, Yukon, and Escalade, Toyota Tundra, 4Runner, Tacoma, Nissan Titan, and similar 6-lug truck platforms. The 87.10mm hub bore fits these platforms, and the 2,600-lb load rating supports full-size truck use. A center cap is included.\u003c\/p\u003e\u003cp\u003eSplit Five-Spoke Mesh Design\u003c\/p\u003e\u003cp\u003eAxe Offroad's UK-rooted design sensibility shows up clearly in the AX5.1's split five-spoke mesh layout. Each of the five spokes divides into two tines as it moves outward from the hub, creating an open, layered face with visual depth that suits the scale of a 24-inch diameter. The lug hardware is exposed and visible on the face around the hub area, adding a purposeful, hardware-forward look that fits the wheel's off-road character. The mirror machined lip provides a bright contrast ring around the outer edge, separating the brushed silver face from the tire sidewall with a clean, reflective border.\u003c\/p\u003e\u003cp\u003eBrushed Silver Finish with Machined Lip\u003c\/p\u003e\u003cp\u003eThe finish is a brushed silver across the face and spokes, with the outer lip machined to a mirror-bright contrast. Brushed silver carries a textured, directional sheen that holds up to road film and brake dust better than a high-polish surface, while the machined lip keeps the wheel's profile sharp and visible from the side. The combination gives the AX5.1 a two-tone presence without requiring a painted accent.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eThe AX5.1 is cast in one-piece alloy, a construction that supports the complex split-spoke mesh geometry across the face without seams or assembly hardware. Cast alloy handles the deep spoke profiles, undercuts, and contoured lip in a single continuous shape, making it well-suited to a design with this level of face detail. At 51 lbs, the wheel comes in right at the typical weight for a 24-inch alloy wheel of this width, consistent with what the construction and size call for.\u003c\/p\u003e\u003cp\u003eOffset and Stance at 24x12 -44mm\u003c\/p\u003e\u003cp\u003eAt -44mm offset on a 12-inch-wide barrel, the AX5.1's mounting surface sits well rearward of the wheel's centerline, pushing the face outward for an aggressive, wide-stance look on lifted truck builds. Backspacing measures 4.77 inches. This combination of 12-inch width and -44mm offset qualifies as a genuinely aggressive fitment, with the outboard wheel position and wide barrel working together to fill the fender arch on trucks running a lift kit. The AX5.1 is also offered in additional sizes, widths, and finishes across the lineup for builds with different fitment targets.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x135 \/ 6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-44 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.77\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSilver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e51 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Axe Offroad","offers":[{"title":"Default Title","offer_id":68713008365849,"sku":"241212H-44AX5SM","price":726.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/ax5.1_silver_white__17691.jpg?v=1794772261"},{"product_id":"24x12-red-wheel-ax5-2-8x6-5-44-24128165-44ax5rm","title":"AX5.2 Red | 24x12 | 8x6.5 -44mm Offset | 24128165-44AX5RM","description":"\u003cp\u003eHeavy-Duty Fitment on the 8x165.1 Pattern\u003c\/p\u003e\u003cp\u003eThe Ram 2500 (2011-2027) and Dodge Ram 2500 (1994-2010) are the natural home for the Axe Offroad AX5.2, and the 8x165.1 (8x6.5) bolt pattern confirms it. This pattern also covers the Chevrolet Silverado 2500 HD (2001-2010), GMC Sierra 2500 HD (2001-2010), and Dodge Ram 1500 (2006-2008), with 10 additional verified platforms across 99 total fitments. The 125.2mm hub bore fits these heavy-duty applications, and the 3,500-lb load rating is built for the demands of full-size HD truck use.\u003c\/p\u003e\u003cp\u003eCandy Red Finish with Milled Spoke Accents\u003c\/p\u003e\u003cp\u003eThe AX5.2 arrives in a Candy Red finish with milled spoke accents that cut through the color to expose the raw aluminum beneath. The contrast between the deep red and the bright milled lines gives the wheel a layered, intentional look that suits builds where visual presence is part of the plan. At 24 inches in diameter, this is a wheel that commands attention on any HD platform it mounts to. A center cap is included.\u003c\/p\u003e\u003cp\u003eSplit Five-Spoke Mesh Design\u003c\/p\u003e\u003cp\u003eThe AX5.2 runs a split five-spoke mesh layout, where each of the five spokes divides into a tight mesh pattern across the face. The design opens up the disc with visual depth while keeping the structure cohesive from hub to outer edge. Lug hardware sits exposed around the hub bore, visible on the face and adding a purposeful, hardware-forward detail to the overall look. The wheel also features an outer lip that frames the face and adds profile depth when viewed from the side.\u003c\/p\u003e\u003cp\u003eOne-Piece Cast Alloy Construction\u003c\/p\u003e\u003cp\u003eAxe Offroad builds the AX5.2 as a one-piece alloy wheel, a construction that supports the complex mesh geometry and deep spoke profile this design demands. Cast aluminum molds accommodate the intricate split-spoke mesh layout in a single continuous form, keeping the face geometry intact through every load cycle. At 51 lbs, the weight is in line with what a 24-inch, 12-inch-wide alloy wheel of this complexity typically runs.\u003c\/p\u003e\u003cp\u003eOffset and Stance at 24x12 with -44mm\u003c\/p\u003e\u003cp\u003eAt -44mm offset on a 12-inch-wide barrel, the mounting surface sits well rearward of the wheel's centerline, pushing the wheel outward for an aggressive, wide-stance look. This combination qualifies as genuinely aggressive fitment: the outboard wheel position adds poke and visual width that stock-offset wheels cannot match. Backspacing measures 4.77 inches. The AX5.2 is also offered in additional sizes, widths, and finishes across the lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e8x165.1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-44 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.77\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e125.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eRed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e3500 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e51 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Axe Offroad","offers":[{"title":"Default Title","offer_id":68713008857369,"sku":"24128165-44AX5RM","price":720.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/ax5.2_red_white__94820.jpg?v=1794772262"},{"product_id":"22x12-silver-wheel-ax6-1-6x135-6x5-5-44-221212h-44ax6sm","title":"AX6.1 Silver | 22x12 | 6x135\/6x5.5 -44mm Offset | 221212H-44AX6SM","description":"\u003cp\u003eFord and GM Full-Size Fitment in One Wheel\u003c\/p\u003e\u003cp\u003eThe Axe Offroad AX6.1 is dual-drilled for both 6x135 and 6x139.7 (6x5.5) bolt patterns, covering a wide range of full-size truck and SUV platforms from a single wheel. On the 6x135 side, it fits the Ford F-150 (2004-2026), Ford Expedition (2003-2027), Lincoln Navigator (2003-2027), Ford F-150 Lightning (2022-2026), and Ford Bronco (2022-2026), plus one additional verified platform. The 6x139.7 pattern opens the wheel to Chevy Silverado 1500, GMC Sierra 1500, Tahoe, Suburban, Yukon, Toyota Tacoma, 4Runner, Nissan Titan, and similar 6-lug truck and SUV applications. The 87.1mm hub bore fits these platforms. With a 2,600-lb load rating, this 22-inch wheel is sized for the demands of full-size truck use.\u003c\/p\u003e\u003cp\u003eSplit Eight-Spoke Design with Machined Detail\u003c\/p\u003e\u003cp\u003eAxe Offroad's UK-rooted design sensibility comes through clearly on the AX6.1. Eight split spokes radiate from the hub in pairs, giving the face an open, layered look that suits the scale of a 22-inch diameter. The Brushed Silver finish covers the face and spokes, while the outer lip is mirror machined to a brighter, reflective contrast. That combination of brushed and machined surfaces gives the wheel visual depth without relying on a single flat tone. Lug hardware is exposed and visible around the hub bore, adding a hardware-forward detail that fits the wheel's off-road character. A center cap is included.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy at 22x12\u003c\/p\u003e\u003cp\u003eThe AX6.1 is cast in one piece from alloy aluminum. One-piece construction supports the complex split-spoke geometry and deep barrel profile in a single continuous shape, keeping the design structurally intact across the full 12-inch width. At 45 lbs, the wheel carries the mass expected for a 22x12 alloy at this scale. Backspacing measures 4.77 inches.\u003c\/p\u003e\u003cp\u003eAggressive Offset for a Wide Stance\u003c\/p\u003e\u003cp\u003eAt -44mm offset on a 12-inch-wide barrel, the AX6.1 pushes the mounting surface well rearward of centerline, positioning the wheel outboard for a wide, aggressive stance. This combination of 12-inch width and -44mm offset qualifies as a genuinely aggressive fitment, with the wheel face sitting noticeably outside the fender plane on most full-size truck builds. Trucks running a lift kit get the most out of this offset, with added clearance to take full advantage of the outboard wheel position. The AX6.1 is also offered in additional sizes, widths, and finishes across the lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x135 \/ 6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-44 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.77\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSilver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e45 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Axe Offroad","offers":[{"title":"Default Title","offer_id":68713009217817,"sku":"221212H-44AX6SM","price":678.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/ax6.1_silver_white__64070.jpg?v=1794772263"},{"product_id":"24x12-silver-wheel-ax6-1-8x180-44-24128180-44ax6sm","title":"AX6.1 Silver | 24x12 | 8x180 -44mm Offset | 24128180-44AX6SM","description":"\u003cp\u003eBuilt for the GM Heavy-Duty Platform\u003c\/p\u003e\u003cp\u003eThe Chevrolet Silverado 2500 HD and 3500 HD, GMC Sierra 2500 HD and 3500 HD, and GMC Sierra 3500 Classic (2007) all run the 8x180 bolt pattern, and the Axe Offroad AX6.1 is sized and drilled specifically for that platform. The 125.20mm hub bore fits these GM heavy-duty applications, and the 3,500-lb load rating supports the payload and towing demands that come with running a 2500 or 3500 series truck. One additional verified platform rounds out the fitment universe beyond the five named here.\u003c\/p\u003e\u003cp\u003eSplit Eight-Spoke Design with Machined Contrast\u003c\/p\u003e\u003cp\u003eThe AX6.1 carries a split eight-spoke layout across a 24-inch face, giving the wheel an open, layered look that suits the scale of a heavy-duty truck. The spokes fan outward from the hub in pairs, creating visual depth without overcrowding the face. Lug hardware sits exposed around the hub bore, visible on the face and adding a purposeful, hardware-forward detail to the center of the wheel. The brushed silver finish runs across the face and spokes, while the outer lip is mirror machined to a brighter, reflective contrast. That two-tone combination gives the AX6.1 a finished, intentional look at 24 inches. A center cap is included.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eAxe Offroad's UK design roots show up in the AX6.1's clean, structured geometry, and the one-piece alloy construction supports that design across the full 24x12-inch form. Cast alloy molds support the split-spoke geometry, the contoured lip, and the hub detail in a single continuous shape, keeping the structural integrity intact through every load cycle. At 60 lbs, the wheel carries the mass appropriate for a 24-inch heavy-duty truck application. Backspacing measures 4.77 inches.\u003c\/p\u003e\u003cp\u003eOffset and Stance on a 24x12 Wheel\u003c\/p\u003e\u003cp\u003eAt -44mm, the mounting surface sits well rearward of the wheel's centerline, pushing the face outward for an aggressive, wide-stance look on GM HD trucks. On a 12-inch-wide, 24-inch-diameter wheel, that offset positions the wheel face noticeably outboard, which is exactly the intent for builds running lift kits where fender clearance opens up to accommodate the wider track. The AX6.1 is also offered in additional sizes and finishes across the lineup for builds with different fitment targets.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e8x180\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-44 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.77\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e125.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSilver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e3500 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e60 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Axe Offroad","offers":[{"title":"Default Title","offer_id":68713009578265,"sku":"24128180-44AX6SM","price":726.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/ax6.1_silver_white__18369.jpg?v=1794772264"},{"product_id":"24x14-red-wheel-ax6-2-6x135-6x5-5-76-241412h-76ax6rm","title":"AX6.2 Red | 24x14 | 6x135\/6x5.5 -76mm Offset | 241412H-76AX6RM","description":"\u003cp\u003eBold Color, Aggressive Scale\u003c\/p\u003e\u003cp\u003eThe Axe Offroad AX6.2 arrives in a Candy Red finish with milled spoke accents, a combination that puts this 24-inch wheel in a category of its own. The deep candy red coat gives the face a rich, saturated color, while the milled accents along the spokes cut through with a bright contrast that keeps the design from reading as a single flat tone. At 24 inches in diameter and 14 inches wide, this is a show-presence wheel built to dominate the fender arch on lifted Ford and GM full-size truck platforms.\u003c\/p\u003e\u003cp\u003eSplit Eight-Spoke Design with Exposed Lugs\u003c\/p\u003e\u003cp\u003eThe AX6.2 runs a split eight-spoke layout, with each pair of spokes branching outward from the hub in a pattern that adds visual complexity without cluttering the face. The lug hardware sits exposed around the hub bore, visible on the face and adding a purposeful, hardware-forward look to the center of the wheel. A center cap is included with this wheel. The outer lip adds depth to the profile, and the milled spoke accents give the design a machined-metal contrast against the candy red surfaces.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eThe AX6.2 is cast in one-piece alloy, a construction that supports the complex split-spoke geometry and deep profile this design demands. Cast molds handle the spoke branching, contoured surfaces, and milled accent areas in a single continuous pour, keeping the structural integrity of the design intact from hub to barrel. The 2,600-lb load rating supports full-size truck applications, and the 87.10mm hub bore fits the 6x135 and 6x139.7 platforms this wheel is drilled for. Backspacing measures 4.51 inches. At 51 lbs, this wheel comes in right at the typical weight for a 24-inch alloy wheel of this width.\u003c\/p\u003e\u003cp\u003eFitment for 6x135 and 6x139.7 Platforms\u003c\/p\u003e\u003cp\u003eFord F-150 owners (2004-2026) are the primary audience for the 6x135 drilling, with the Expedition (2003-2027), Lincoln Navigator (2003-2027), F-150 Lightning (2022-2026), and Ford Bronco (2022-2026) also fitting this pattern. The secondary 6x139.7 (6x5.5) drilling opens the wheel to GM full-size platforms including the Silverado 1500, Sierra 1500, Tahoe, Suburban, Yukon, and Escalade, along with Toyota Tundra, 4Runner, Nissan Titan, and similar 6-lug truck applications, covering six verified platforms in total.\u003c\/p\u003e\u003cp\u003eOffset and Stance at This Scale\u003c\/p\u003e\u003cp\u003eThe -76mm offset places the mounting surface well rearward of the wheel's centerline, pushing the face outward for an aggressive, wide-stance look on lifted truck builds. At 14 inches wide with a -76mm offset, this combination is purpose-built for trucks running substantial lift kits where fender clearance supports the outboard wheel position. The AX6.2 is also offered in additional sizes, widths, and finish options across the lineup for builds with different fitment targets.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x135 \/ 6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-76 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.51\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eRed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e51 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Axe Offroad","offers":[{"title":"Default Title","offer_id":68713010004249,"sku":"241412H-76AX6RM","price":786.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/ax6.2_red_white__48973.jpg?v=1794772265"},{"product_id":"22x12-red-wheel-ax6-2-8x6-5-44-22128165-44ax6rm","title":"AX6.2 Red | 22x12 | 8x6.5 -44mm Offset | 22128165-44AX6RM","description":"\u003cp\u003eHeavy-Duty Fitment on the 8x165.1 Pattern\u003c\/p\u003e\u003cp\u003eRam 2500 and 3500 owners, along with Chevrolet Silverado 2500 HD and GMC Sierra 2500 HD drivers running the 8x165.1 (8x6.5) bolt pattern, have 99 verified fitment matches for the Axe Offroad AX6.2. Primary fits include the Ram 2500 (2011-2027), Dodge Ram 2500 (1994-2010), Chevrolet Silverado 2500 HD (2001-2010), GMC Sierra 2500 HD (2001-2010), and the Dodge Ram 1500 (2006-2008), with 10 additional verified platforms beyond those. The 125.2mm hub bore fits these heavy-duty platforms, and the 3,500-lb load rating supports the payload and towing demands that come with HD truck ownership.\u003c\/p\u003e\u003cp\u003eCandy Red Finish with Milled Spoke Accents\u003c\/p\u003e\u003cp\u003eThe AX6.2 wears a Candy Red finish with milled spoke accents, a combination that puts sharp contrast directly on the wheel face. The deep, saturated red coat covers the split eight-spoke structure, while the milled accents cut through to a brighter aluminum surface along the spokes, giving the wheel a two-tone look that holds its character across different lighting conditions. It is a bold choice that suits builds where the wheel is meant to be noticed.\u003c\/p\u003e\u003cp\u003eSplit Eight-Spoke Cast Alloy Construction\u003c\/p\u003e\u003cp\u003eThe AX6.2 is a one-piece cast alloy wheel, and cast construction is the right foundation for a design this detailed. The split eight-spoke layout, with its layered spoke geometry and milled surface work, benefits from the mold-formed shaping that casting supports. Cast aluminum carries complex spoke profiles and contoured faces in a single continuous structure, and at 45 lbs for a 22-inch, 12-inch-wide wheel, the AX6.2 comes in close to the typical weight for this class. The exposed lug hardware sits in a circle around the hub bore, visible on the face and adding a purposeful, hardware-forward look to the overall design. A center cap is included.\u003c\/p\u003e\u003cp\u003eOffset and Stance at 22x12 with -44mm\u003c\/p\u003e\u003cp\u003eAt -44mm offset on a 12-inch-wide barrel, the AX6.2 pushes the mounting surface well rearward of the wheel's centerline, moving the wheel outward for an aggressive, wide-stance look on lifted HD truck builds. The 4.77 inches of backspacing reflects that outboard positioning. This is a combination built for trucks already running a lift kit, where the added clearance lets the wide barrel and outboard wheel position work as intended without interference. The AX6.2 is also offered in additional sizes and finishes across the lineup for builds with different fitment targets.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e8x165.1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-44 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.77\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e125.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eRed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e3500 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e45 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Axe Offroad","offers":[{"title":"Default Title","offer_id":68713010364697,"sku":"22128165-44AX6RM","price":678.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/ax6.2_red_white__88081.jpg?v=1794772266"},{"product_id":"22x12-white-milled-wheel-ax6-3-6x135-6x5-5-44-221212h-44ax6wm","title":"AX6.3 White Milled | 22x12 | 6x135\/6x5.5 -44mm Offset | 221212H-44AX6WM","description":"\u003cp\u003eFord and GM Full-Size Fitment in One Wheel\u003c\/p\u003e\u003cp\u003eThe Axe Offroad AX6.3 is dual-drilled for both 6x135 and 6x139.7 (6x5.5) bolt patterns, covering Ford F-150 (2004-2026), Ford Expedition (2003-2027), Lincoln Navigator (2003-2027), Ford F-150 Lightning (2022-2026), and Ford Bronco (2022-2026), plus one additional verified platform. The 6x139.7 pattern extends fitment to Chevy Silverado 1500, GMC Sierra 1500, Tahoe, Suburban, Yukon, and similar GM full-size platforms. The 87.10mm hub bore fits both bolt-pattern groups. With six verified fitments across two major truck families, this wheel covers a wide range of full-size builds from a single SKU.\u003c\/p\u003e\u003cp\u003eSplit Eight-Spoke Design with Milled Accents\u003c\/p\u003e\u003cp\u003eThe AX6.3 runs a split eight-spoke layout across a 22-inch face, with each pair of spokes branching outward from the hub in a clean, open pattern. The finish is Gloss White with milled spoke accents: the white gloss surfaces carry the base color across the face and barrel, while the milled accents cut through to expose the raw aluminum along the spoke faces for a two-tone contrast. Lug hardware sits exposed around the hub bore, visible on the face as part of the design rather than hidden behind a cap. A center cap is included with this wheel. The outer lip adds depth to the profile on this 12-inch-wide barrel, and the non-directional layout means no side-specific mounting.\u003c\/p\u003e\u003cp\u003eOne-Piece Cast Alloy Construction\u003c\/p\u003e\u003cp\u003eAxe Offroad builds the AX6.3 as a one-piece cast alloy wheel, a construction that supports the complex split-spoke geometry and deep barrel profile in a single continuous form. Cast alloy handles the contoured spoke shapes and milled surface work without the assembly complexity of multi-piece construction, and the one-piece form keeps the structural integrity intact across the full load cycle. The 2,600-lb load rating supports full-size truck payloads, and at 60 lbs the wheel reflects the mass of a 22x12 cast alloy piece built to this scale.\u003c\/p\u003e\u003cp\u003eAggressive Offset for a Wide Stance\u003c\/p\u003e\u003cp\u003eAt -44mm offset on a 12-inch-wide barrel, the AX6.3 pushes the mounting surface well rearward of the wheel's centerline, positioning the face outboard for a wide, aggressive stance. This combination of 12-inch width and -44mm offset qualifies as a genuinely aggressive fitment: the wheel sits noticeably further outboard than stock, with poke that shows on lifted builds running this size. Backspacing measures 4.77 inches. This offset is built for trucks running a lift kit, where the added clearance lets the outboard wheel position work without interference. The AX6.3 is also offered in additional sizes, widths, and finishes across the lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x135 \/ 6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-44 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.77\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eWhite Milled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e60 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Axe Offroad","offers":[{"title":"Default Title","offer_id":68713010659609,"sku":"221212H-44AX6WM","price":678.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/ax63_whitemilled_white__00479.jpg?v=1794772267"},{"product_id":"24x12-white-milled-wheel-ax6-3-6x135-6x5-5-44-241212h-44ax6wm","title":"AX6.3 White Milled | 24x12 | 6x135\/6x5.5 -44mm Offset | 241212H-44AX6WM","description":"\u003cp\u003eFord and GM Platforms, One Dual-Drilled Wheel\u003c\/p\u003e\u003cp\u003eThe Axe Offroad AX6.3 is drilled for both 6x135 and 6x139.7 (6x5.5), covering two of the most popular 6-lug truck platforms in a single wheel. On the 6x135 side, it fits the Ford F-150 (2004-2026), Ford Expedition (2003-2027), Lincoln Navigator (2003-2027), Ford F-150 Lightning (2022-2026), and Ford Bronco (2022-2026), plus one additional verified platform. The 6x139.7 pattern opens the wheel to Chevy Silverado 1500, GMC Sierra 1500, Tahoe, Suburban, Yukon, Escalade, Toyota Tacoma and 4Runner, Nissan Titan, and similar 6-lug truck and SUV applications. The 87.10mm hub bore fits across these platforms. At 2,600 lbs load rating, this 24-inch wheel is sized for full-size truck duty.\u003c\/p\u003e\u003cp\u003eSplit Eight-Spoke Design in Gloss White\u003c\/p\u003e\u003cp\u003eThe AX6.3 runs a split eight-spoke layout, with each pair of spokes branching outward from the hub to the outer barrel. The finish is Gloss White with milled spoke accents: the white gloss surfaces carry the base color across the face, while the milled treatment cuts through to expose the raw aluminum along the spoke faces for a two-tone contrast. Exposed lug hardware sits in a circle around the hub bore, visible on the face and adding a hardware-forward look to the design. A center cap is included. The outer lip adds depth to the profile on this 12-inch-wide barrel.\u003c\/p\u003e\u003cp\u003eCast Alloy Construction at 24 Inches\u003c\/p\u003e\u003cp\u003eAt 24 inches in diameter and 12 inches wide, the AX6.3 is built as a one-piece cast alloy wheel. Cast construction supports the complex split-spoke geometry and the deep barrel profile in a single continuous shape, keeping the design's visual depth intact without the added complexity of a multi-piece assembly. The wheel comes in at 69 lbs, consistent with a 24x12 cast alloy wheel carrying this level of face detail and barrel depth. Backspacing measures 4.77 inches.\u003c\/p\u003e\u003cp\u003eAggressive Stance at -44mm Offset\u003c\/p\u003e\u003cp\u003eA -44mm offset places the mounting surface well rearward of the wheel's centerline, pushing the face outward for a wide, aggressive stance. On a 12-inch-wide barrel, that combination qualifies as a genuinely outboard wheel position: the face sits noticeably outside the fender plane on most truck builds, and the look is most at home on setups running a lift kit where fender clearance opens up to match the wheel's proportions. At 24 inches, this is a show-presence size that commands attention on the road and at truck meets alike. The AX6.3 is also offered in additional sizes, widths, and finishes across the lineup for builds with different fitment targets.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x135 \/ 6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-44 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.77\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eWhite Milled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e69 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Axe Offroad","offers":[{"title":"Default Title","offer_id":68713011085593,"sku":"241212H-44AX6WM","price":726.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/ax63_whitemilled_white__02256.jpg?v=1794772269"},{"product_id":"22x12-polished-wheel-ax6-5-6x135-6x5-5-44-221212h-44ax6fp","title":"AX6.5 Polished | 22x12 | 6x135\/6x5.5 -44mm Offset | 221212H-44AX6FP","description":"\u003cp\u003eFord and GM Full-Size Fitment in One Wheel\u003c\/p\u003e\u003cp\u003eThe Axe Offroad AX6.5 is a dual-drilled 22x12 wheel that covers two of the most popular 6-lug truck bolt patterns: 6x135 and 6x139.7 (6x5.5). On the 6x135 side, it fits the Ford F-150 (2004-2026), Ford Expedition (2003-2027), Lincoln Navigator (2003-2027), Ford F-150 Lightning (2022-2026), and Ford Bronco (2022-2026), plus one additional verified platform. The 6x139.7 pattern opens the wheel to GM full-size trucks and SUVs including the Silverado 1500, Sierra 1500, Tahoe, Suburban, Yukon, and Escalade, as well as Toyota Tundra, Tacoma, 4Runner, Nissan Titan, and similar applications. The 87.1mm hub bore fits across these platforms.\u003c\/p\u003e\u003cp\u003eSplit Eight-Spoke Design with Polished Finish\u003c\/p\u003e\u003cp\u003eThe AX6.5 runs a split eight-spoke layout with a full polished finish across the face, spokes, and barrel. Rivets accent the wheel face, adding a hardware-forward detail that suits the aggressive proportions of this size. Lug hardware is exposed and visible around the hub area, keeping the mounting hardware as part of the visual statement rather than hiding it behind a cap. A center cap is included with this wheel. The outer lip is present and contributes to the wheel's depth profile at 22 inches.\u003c\/p\u003e\u003cp\u003eOne-Piece Cast Alloy Construction\u003c\/p\u003e\u003cp\u003eAxe Offroad's UK design sensibility shows in the AX6.5's one-piece cast alloy build, which supports the complex split-spoke geometry and deep polished surface without the seams or hardware of a multi-piece assembly. Cast construction handles the contoured spoke profile and the full-face polish in a single continuous form, and the 2,600-lb load rating supports full-size truck and SUV applications. At 45 lbs, this wheel comes in near the typical weight for a 22-inch alloy wheel of this width, consistent with what one-piece cast construction delivers at this scale.\u003c\/p\u003e\u003cp\u003eOffset and Stance at 22x12\u003c\/p\u003e\u003cp\u003eAt -44mm offset on a 12-inch-wide barrel, the AX6.5 pushes the mounting surface well rearward of the wheel's centerline, positioning the face outboard for an aggressive, wide-stance look. This combination of 12-inch width and -44mm offset qualifies as genuinely aggressive fitment, with the wheel sitting noticeably outboard relative to stock positioning. Backspacing measures 4.77 inches. This size works best on builds running a lift kit, where the added ride height gives the wider track room to clear fenders and suspension components cleanly. The AX6.5 is also offered in additional sizes, widths, and finishes across the lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x135 \/ 6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-44 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.77\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePolished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e45 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Axe Offroad","offers":[{"title":"Default Title","offer_id":68713011478809,"sku":"221212H-44AX6FP","price":888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/ax6.5_polished_white__87067.jpg?v=1794772270"},{"product_id":"24x12-polished-wheel-ax6-5-6x135-6x5-5-44-241212h-44ax6fp","title":"AX6.5 Polished | 24x12 | 6x135\/6x5.5 -44mm Offset | 241212H-44AX6FP","description":"\u003cp\u003eFord and GM Platforms, One Dual-Drilled Wheel\u003c\/p\u003e\u003cp\u003eThe Axe Offroad AX6.5 is drilled for both 6x135 and 6x139.7 (6x5.5), covering Ford's full-size truck and SUV lineup alongside the most common 6-lug GM platforms. On the Ford side, verified fitment includes the F-150 (2004-2026), Expedition (2003-2027), Lincoln Navigator (2003-2027), F-150 Lightning (2022-2026), and Ford Bronco (2022-2026), plus one additional verified platform. The 6x139.7 pattern opens the AX6.5 to Chevy Silverado 1500, GMC Sierra 1500, Tahoe, Suburban, Yukon, and Escalade builds, along with Toyota Tundra, 4Runner, Tacoma, Nissan Titan, and similar applications. The 106.10mm hub bore fits across these platforms. A center cap is included.\u003c\/p\u003e\u003cp\u003eSplit Eight-Spoke Design with Polished Finish\u003c\/p\u003e\u003cp\u003eThe AX6.5 runs a split eight-spoke layout with a full polished finish across the face, spokes, and barrel. Each of the eight split spokes fans outward from the hub in a symmetrical pattern, giving the wheel visual depth without heavy surface detail. The polished aluminum finish delivers a mirror-bright appearance that suits builds where presence is the priority. Rivets accent the wheel face, and the exposed lug hardware sits in a ring around the hub bore, visible on the face as part of the design. The outer lip adds further depth to the profile at this 24-inch diameter.\u003c\/p\u003e\u003cp\u003eOne-Piece Cast Alloy Construction\u003c\/p\u003e\u003cp\u003eAt 24 inches across and 12 inches wide, the AX6.5 relies on one-piece cast alloy construction to carry the split-spoke geometry cleanly from hub to barrel in a single continuous form. Cast molds support the complex spoke geometry and contoured lip this design demands, and the proven construction delivers reliable long-haul value for full-size truck applications. The wheel weighs 51 lbs, which is right in line with typical weight for a 24-inch alloy wheel of this width.\u003c\/p\u003e\u003cp\u003eFitment Details: -44mm Offset, 24x12 Proportions\u003c\/p\u003e\u003cp\u003eFord F-150 and Expedition owners get a wheel sized for lifted builds, where the 24-inch diameter and 12-inch width fill the fender arch with authority. The -44mm offset places the mounting surface rearward of the wheel's centerline, pushing the face outward for an aggressive, wide stance. At 12 inches wide with a -44mm offset, this combination qualifies as genuinely aggressive fitment: expect outboard wheel positioning and visible poke on lifted setups. Backspacing measures 4.77 inches. The 2,600-lb load rating supports full-size truck payloads. The AX6.5 is also offered in additional sizes, widths, and finishes across the lineup for builds with different fitment targets.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x135 \/ 6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-44 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.77\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePolished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e51 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Axe Offroad","offers":[{"title":"Default Title","offer_id":68713011872025,"sku":"241212H-44AX6FP","price":895.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/ax6.5_polished_white__65690.jpg?v=1794772271"},{"product_id":"20x9-5-gloss-black-wheel-artemis-6x135-6x5-5-15-209512h-15artgb","title":"Artemis Gloss Black | 20x9.5 | 6x135\/6x5.5 -15mm Offset | 209512H-15ARTGB","description":"\u003cp\u003eFord and GM Full-Size Fitment in One Wheel\u003c\/p\u003e\u003cp\u003eThe Axe Offroad Artemis is a dual-drilled 20x9.5 wheel covering two of the most common 6-lug truck bolt patterns: 6x135 for Ford F-150, Expedition, Navigator, F-150 Lightning, and Bronco (2003-2027), and 6x139.7 (6x5.5) for GM full-size platforms including the Silverado 1500, Sierra 1500, Tahoe, Suburban, Yukon, and Escalade, along with Toyota Tundra, Tacoma, 4Runner, Nissan Titan, and similar applications. One additional verified platform rounds out the fitment list. The 106mm hub bore fits these Ford and GM applications, and the 2,600-lb load rating supports full-size truck use. A center cap is included.\u003c\/p\u003e\u003cp\u003eEight-Spoke Concave Design with Exposed Lugs\u003c\/p\u003e\u003cp\u003eThe Artemis carries Axe Offroad's off-road-influenced design sensibility into a clean, truck-scaled package. Eight spokes sweep inward toward a concave face, giving the wheel visual depth and a forward-leaning profile that suits aggressive truck builds. Lug hardware sits exposed around the hub bore on the wheel face, adding a raw, hardware-forward look that complements the concave geometry. The outer lip frames the barrel profile, and the gloss black finish ties the whole face together in a high-contrast, low-maintenance look that holds up through road film and seasonal use.\u003c\/p\u003e\u003cp\u003eOne-Piece Cast Alloy Construction\u003c\/p\u003e\u003cp\u003eThe Artemis is built as a one-piece cast alloy wheel, a construction that supports the complex concave spoke geometry and deep face profile in a single continuous shape. Cast alloy has earned its place as the most widely used construction in aftermarket truck wheels for good reason: it delivers proven structural integrity and reliable long-haul value at a price point that makes sense for a daily-driven or weekend-built truck. At 50 lbs, the Artemis carries the weight that comes with a 20-inch diameter, a 9.5-inch barrel, and the structural depth of a concave face.\u003c\/p\u003e\u003cp\u003eOffset and Stance Details\u003c\/p\u003e\u003cp\u003eAt -15mm offset, the Artemis positions the mounting surface rearward of the wheel's centerline, pushing the face outward relative to the hub. On a 9.5-inch-wide wheel, this offset moves the wheel outboard for a more planted, filled-out stance compared to stock positioning. Backspacing measures 4.66 inches. This combination suits trucks running a leveling kit or lift kit, where the outboard wheel position and 20-inch diameter work together to fill the fender arch with presence. The Artemis is also offered in additional sizes, widths, and finishes across the lineup for builds with different fitment targets.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x135 \/ 6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-15 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.66\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eGloss Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e50 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Axe Offroad","offers":[{"title":"Default Title","offer_id":68713012363545,"sku":"209512H-15ARTGB","price":385.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/artemis_glossblack_56lug_white__21222.jpg?v=1794772272"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/collections\/images_20_2831_29_1791847777__07182.jpg?v=1794865758","url":"https:\/\/offroadsource.com\/collections\/axe-offroad.oembed","provider":"Offroad Source","version":"1.0","type":"link"}