{"title":"HD","description":null,"products":[{"product_id":"14x5-5-black-machined-wheel-canyon-trailer-5x4-5-0-cy1455650bk","title":"Canyon Trailer Black Machined | 14x5.5 | 5x4.5 0mm Offset | CY1455650BK","description":"\u003cp\u003eBuilt for the Trailer Platform\u003c\/p\u003e\u003cp\u003eThe HD Canyon Trailer is a 14x5.5 alloy wheel sized and drilled specifically for trailer applications running the 5x114.3 (5x4.5) bolt pattern. At 0mm offset, the mounting surface sits exactly at the wheel's centerline, placing the wheel in a neutral, balanced position that suits the load-bearing demands of trailer use. The 83mm hub bore fits 5x114.3 trailer hubs, and the 3.25 inches of backspacing positions the wheel evenly within the fender envelope. At 18.20 lbs, the Canyon Trailer brings alloy construction to a platform where weight and durability both matter.\u003c\/p\u003e\u003cp\u003eSplit Mesh Design with Exposed Hardware\u003c\/p\u003e\u003cp\u003eThe Canyon Trailer runs a split ten-spoke mesh layout across the face, with each pair of spokes forming a tight, interlocking mesh pattern that gives the wheel visual structure without adding bulk. The gloss black finish covers the face and barrel, while the spoke faces are machined to a brighter contrast, creating a two-tone look that stands out against the gloss black background. Rivets accent the face around the hub area, adding a finished, intentional detail to the overall design. Lug hardware sits exposed in a circle around the hub bore, visible on the face and contributing to the wheel's purposeful, hardware-forward appearance. A center cap is included.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eThe Canyon Trailer is cast in one-piece alloy, a construction that supports the complex split mesh geometry across the face in a single continuous form. One-piece alloy casting delivers proven structural integrity for trailer load cycles, keeping the spoke geometry consistent and the finish intact through repeated use. The construction also keeps the wheel accessible in a category where long-term value matters as much as appearance.\u003c\/p\u003e\u003cp\u003eFitment for 5x114.3 Trailer Applications\u003c\/p\u003e\u003cp\u003eThis wheel is built for trailer use on the 5x114.3 (5x4.5) bolt pattern, one of the most common five-lug patterns across utility, boat, and cargo trailer platforms. The 14-inch diameter and 5.5-inch width are standard trailer sizing, and the 0mm offset keeps the wheel centered for stable tracking under load. The 83mm hub bore fits this bolt pattern's trailer hub applications. If you need a different size, finish, or bolt pattern, the Canyon Trailer is offered across additional configurations in HD's trailer wheel lineup.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e5.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x114.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e3.25\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e83 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack Machined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e18.2 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"HD","offers":[{"title":"Default Title","offer_id":68713083207961,"sku":"CY1455650BK","price":134.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/canyontrailer_blackmachined_white__84606.jpg?v=1794772721"},{"product_id":"14x5-5-black-milled-wheel-canyon-trailer-5x4-5-0-cy1455650gb-m","title":"Canyon Trailer Black Milled | 14x5.5 | 5x4.5 0mm Offset | CY1455650GB-M","description":"\u003cp\u003eBuilt for the Trailer Platform\u003c\/p\u003e\u003cp\u003eThe HD Canyon Trailer is a 14x5.5 alloy wheel sized specifically for trailer applications running the 5x114.3 (5x4.5) bolt pattern. At 0mm offset, the mounting surface sits exactly at the wheel's centerline, placing the wheel in a neutral, balanced position that suits trailer axle geometry. The 83mm hub bore fits 5x114.3 trailer hubs, and the 3.25 inches of backspacing keeps the wheel centered in the fender. At 18.20 lbs, this one-piece alloy construction brings a solid, dependable weight profile for trailer duty.\u003c\/p\u003e\u003cp\u003eSplit Mesh Design with Exposed Hardware\u003c\/p\u003e\u003cp\u003eThe Canyon Trailer runs a split ten-spoke mesh layout across the face, with each pair of spokes branching outward from the hub in a tight, interlocking pattern that gives the wheel visual structure without adding bulk. The lug hardware is exposed and visible around the hub area, sitting in a circle at the center of the face where the wheel mounts to the axle. Rivets accent the face, adding a finished, intentional detail to the overall look. The combination of the mesh geometry, exposed lugs, and rivet accents gives this trailer wheel a presence that goes beyond a basic utility design.\u003c\/p\u003e\u003cp\u003eGloss Black with Milled Spoke Edges\u003c\/p\u003e\u003cp\u003eThe finish is gloss black across the face and barrel, with the spoke edges milled to a bright, contrasting silver. That contrast between the deep gloss black and the milled edges traces the split-spoke geometry cleanly, making the mesh pattern stand out without any additional color or graphic work. The milled edges follow the spoke lines precisely, so the finish reinforces the wheel's structure rather than competing with it. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eFitment for 5x114.3 Trailer Applications\u003c\/p\u003e\u003cp\u003eThe 5x114.3 (5x4.5) bolt pattern covers a wide range of trailer axle hubs, from utility and cargo trailers to boat trailers and equipment haulers built around this common five-lug spacing. The 14-inch diameter and 5.5-inch width sit in the standard range for single-axle and tandem trailer setups. The 0mm offset and centered backspacing keep the wheel tracking true on the axle without pushing outboard or tucking inboard. The Canyon Trailer is also offered in additional sizes and finish options across the HD lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e5.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x114.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e3.25\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e83 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack Milled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e18.2 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"HD","offers":[{"title":"Default Title","offer_id":68713083633945,"sku":"CY1455650GB-M","price":144.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/canyontrailer_blackmilled_white__58649.jpg?v=1794772722"},{"product_id":"14x5-5-black-orange-wheel-canyon-trailer-5x4-5-0-cy1455650ml3-or","title":"Canyon Trailer Black Orange | 14x5.5 | 5x4.5 0mm Offset | CY1455650ML3-OR","description":"\u003cp\u003eSplit Ten-Spoke Mesh Design for Trailers\u003c\/p\u003e\u003cp\u003eThe HD Canyon Trailer brings a sharp, truck-inspired look to trailer applications with a split ten-spoke mesh layout and gloss black finish accented by orange machined spoke faces. The contrast between the deep gloss black and the bright machined orange gives the wheel a purposeful, color-forward appearance that stands out on utility, recreational, and sport trailers alike. Rivets on the face add a finishing detail that reinforces the aggressive character of the design. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eGloss Black with Orange Machined Spoke Faces\u003c\/p\u003e\u003cp\u003eThe finish starts with a gloss black base across the wheel body, with each spoke face machined to expose the aluminum beneath and then finished in orange. That two-tone treatment gives the Canyon Trailer a bold, high-contrast look that holds up to road exposure. The machined spoke faces catch the orange accent cleanly, and the gloss black surrounding them keeps the overall profile sharp and intentional.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eHD builds the Canyon Trailer as a one-piece alloy wheel, a construction that has made it the most widely used method in aftermarket wheel manufacturing for good reason. The single-piece form supports the split mesh spoke geometry and the machined spoke faces without the complexity of multi-piece assembly, and the alloy material keeps weight manageable at 17 lbs per wheel. The 1,750-lb load rating is sized for trailer duty, covering a wide range of single-axle and tandem-axle trailer applications.\u003c\/p\u003e\u003cp\u003eFitment for 5x114.3 (5x4.5) Trailer Applications\u003c\/p\u003e\u003cp\u003eThe 5x114.3 (5x4.5) bolt pattern is one of the most common patterns in the trailer wheel market, shared across a broad range of utility, boat, and recreational trailer hubs. At 14x5.5 with a 0mm offset, the mounting surface sits exactly at the wheel's centerline, placing the wheel symmetrically on the hub for a balanced, neutral stance. The 83mm hub bore fits 5x114.3 trailer hubs, and the 3.25 inches of backspacing positions the wheel evenly within the fender profile. The Canyon Trailer is also offered in additional sizes and finish options across the HD lineup for builds that need a different fit.\u003c\/p\u003e\u003cp\u003eSpecs That Match the Application\u003c\/p\u003e\u003cp\u003eAt 14 inches in diameter and 5.5 inches wide, this wheel is sized for standard trailer fitment where a 14-inch tire is the correct match. The exposed lug hardware sits in a circle around the hub bore at the center of the face, visible against the gloss black finish and adding to the wheel's purposeful look. With a 1,750-lb load rating per wheel and one-piece alloy construction, the Canyon Trailer is built to handle the demands of regular trailer use without sacrificing the visual character that sets it apart from plain steel trailer wheels.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e5.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x114.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e3.25\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e83 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack Orange\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e1750 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e17 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"HD","offers":[{"title":"Default Title","offer_id":68713084059929,"sku":"CY1455650ML3-OR","price":159.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/canyontrailer_blackorange_white__04416.jpg?v=1794772724"},{"product_id":"14x5-5-gloss-black-wheel-canyon-trailer-5x4-5-0-cy1455650agb","title":"Canyon Trailer Gloss Black | 14x5.5 | 5x4.5 0mm Offset | CY1455650AGB","description":"\u003cp\u003eBuilt for the Trailer Platform\u003c\/p\u003e\u003cp\u003eThe HD Canyon Trailer is a 14x5.5 alloy wheel sized and rated for trailer applications running the 5x114.3 (5x4.5) bolt pattern. At 0mm offset, the mounting surface sits exactly at the wheel's centerline, placing the barrel evenly between the hub face and the outer edge for a balanced, symmetrical profile. The 83.10mm hub bore fits 5x114.3 trailer hubs, and the 1,750-lb load rating supports the demands of trailering duty. Backspacing measures 3.25 inches.\u003c\/p\u003e\u003cp\u003eSplit Ten-Spoke Mesh Design\u003c\/p\u003e\u003cp\u003eThe Canyon Trailer runs a split ten-spoke mesh layout across the face, with each pair of spokes forming a tight V-shape that repeats around the hub in a dense, interlocking pattern. The mesh geometry gives the wheel visual structure without adding unnecessary weight, and the open negative space between spoke pairs keeps the design from looking heavy on smaller trailer applications. Exposed lug hardware sits in a circle around the hub bore, visible on the face and adding a purposeful, hardware-forward detail to the overall look. Rivets accent the face as well, reinforcing the intentional, finished character of the design.\u003c\/p\u003e\u003cp\u003eGloss Black Finish on One-Piece Alloy\u003c\/p\u003e\u003cp\u003eHD builds the Canyon Trailer as a one-piece alloy wheel, and the construction suits what trailer wheels are asked to do: hold a consistent load rating across a wide range of conditions without the complexity of multi-piece assembly. The gloss black finish covers the face and barrel in a clean, uniform coat that holds up to road exposure and pairs well with a wide range of trailer colors and trim. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eFitment for 5x114.3 Trailer Applications\u003c\/p\u003e\u003cp\u003eThe 5x114.3 (5x4.5) bolt pattern covers a broad range of trailer axle hubs, making the Canyon Trailer a practical fit across utility, cargo, and recreational trailer builds. The 14-inch diameter and 5.5-inch width are a standard trailer sizing combination, and the 0mm offset keeps the wheel centered on the hub without pushing outboard or tucking inward. The Canyon Trailer is also offered in additional sizes and finishes across the HD lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e5.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x114.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e3.25\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e83.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eGloss Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e1750 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e18.53 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"HD","offers":[{"title":"Default Title","offer_id":68713084420377,"sku":"CY1455650AGB","price":129.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/canyontrailer_glossblack_white__52215.jpg?v=1794772725"},{"product_id":"14x5-5-milled-black-wheel-canyon-trailer-5x4-5-0-cy1455650ml3","title":"Canyon Trailer Milled Black | 14x5.5 | 5x4.5 0mm Offset | CY1455650ML3","description":"\u003cp\u003eBuilt for Trailer Applications\u003c\/p\u003e\u003cp\u003eThe HD Canyon Trailer is a 14x5.5 alloy wheel sized and rated for trailer use, drilled for the 5x114.3 (5x4.5) bolt pattern. At 0mm offset, the mounting surface sits exactly at the wheel's centerline, placing the barrel evenly on both sides of the hub for a balanced, symmetrical profile. The 83mm hub bore fits 5x114.3 trailer hubs, and the 3.25-inch backspacing positions the wheel squarely within the fender envelope. At 18.2 lbs, this is a solid alloy wheel that brings both durability and a cleaner look than a stamped steel alternative.\u003c\/p\u003e\u003cp\u003eMesh Design with Milled Spoke Faces\u003c\/p\u003e\u003cp\u003eThe Canyon Trailer runs a split ten-spoke mesh layout across the face, with each of the ten split spokes milled to a bright contrast against the gloss black background. The milled spoke faces catch the eye without adding visual clutter, giving the wheel a finished, intentional appearance that suits utility trailers, boat trailers, and cargo applications where looks still matter. Rivets accent the face near the hub area, adding a detail that ties the design together. Lug hardware is exposed and visible on the face, sitting in a circle around the hub bore where the wheel mounts.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eThe Canyon Trailer is cast in one-piece alloy, a construction that supports the complex mesh spoke geometry and milled face detail in a single continuous shape. One-piece alloy brings proven long-haul reliability at a price point that makes sense for trailer builds, where multiple wheels are often purchased at once. The construction holds the milled finish consistently across the spoke faces without the variability that comes with multi-piece assembly.\u003c\/p\u003e\u003cp\u003eFitment for 5x114.3 Trailer Platforms\u003c\/p\u003e\u003cp\u003eThe 5x114.3 (5x4.5) bolt pattern covers a wide range of trailer axle hubs, making this wheel a straightforward fit for single-axle and tandem utility, boat, and cargo trailer setups running this pattern. The 0mm offset and 3.25-inch backspacing keep the wheel centered on the hub without pushing outboard or tucking inward. A center cap is included with this wheel. The Canyon Trailer is also offered in additional sizes and finish options to cover other trailer configurations across the HD lineup.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e5.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x114.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e3.25\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e83 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eMilled Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e18.2 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"HD","offers":[{"title":"Default Title","offer_id":68713084813593,"sku":"CY1455650ML3","price":149.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/canyontrailer_milledblack_white__76504.jpg?v=1794772726"},{"product_id":"14x5-5-silver-machined-wheel-canyon-trailer-5x4-5-0-cy1455650sm","title":"Canyon Trailer Silver Machined | 14x5.5 | 5x4.5 0mm Offset | CY1455650SM","description":"\u003cp\u003eSplit Ten-Spoke Style for Trailer Applications\u003c\/p\u003e\u003cp\u003eThe HD Canyon Trailer brings a sharp, truck-inspired look to a 14x5.5 trailer wheel. The split ten-spoke mesh design gives the face an open, layered appearance that stands apart from the plain stamped steel wheels common on most trailers. Rivets accent the hub area, and the lug hardware sits exposed on the face in a circle around the hub bore, adding a purposeful, hardware-forward detail that suits the wheel's overall character. A center cap is included.\u003c\/p\u003e\u003cp\u003eGloss Silver with Machined Spoke Faces\u003c\/p\u003e\u003cp\u003eThe finish is gloss silver across the wheel, with the spoke faces machined to a brighter, contrasting tone. That two-tone result gives the Canyon Trailer visual depth without going loud: the machined surfaces catch attention while the gloss silver areas keep the overall look clean and coordinated. It's a finish combination that holds up well on a working trailer while still looking intentional at the job site or on the road.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eHD builds the Canyon Trailer as a one-piece alloy wheel, and that construction suits what this wheel is asked to do. Cast alloy supports the split ten-spoke mesh geometry in a single continuous shape, keeping the design's detail intact through load cycles. At 18.53 lbs, the wheel carries a 1,750-lb load rating, appropriate for single-axle and light tandem trailer setups. The 3.25-inch backspacing pairs with the 0mm offset, placing the mounting surface exactly at the wheel's centerline.\u003c\/p\u003e\u003cp\u003eFitment for 5x114.3 (5x4.5) Trailer Platforms\u003c\/p\u003e\u003cp\u003eThe Canyon Trailer is drilled for the 5x114.3 (5x4.5) bolt pattern, one of the most common patterns found on utility, landscape, and light cargo trailers. The 83.10mm hub bore fits the hubs on these trailer applications. At 14 inches in diameter and 5.5 inches wide, this wheel is sized for standard trailer tire fitments in the ST175 and ST185 range. The 0mm offset keeps the wheel centered on the hub, a straightforward geometry for trailer axle setups where even load distribution matters.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e5.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x114.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e3.25\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e83.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSilver Machined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e1750 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e18.53 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"HD","offers":[{"title":"Default Title","offer_id":68713085337881,"sku":"CY1455650SM","price":139.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/canyontrailer_silvermachined_white__49800.jpg?v=1794772727"},{"product_id":"15x6-black-machined-wheel-canyon-trailer-5x4-5-0-cy1560650bk","title":"Canyon Trailer Black Machined | 15x6 | 5x4.5 0mm Offset | CY1560650BK","description":"\u003cp\u003eBuilt for the Trailer Platform\u003c\/p\u003e\u003cp\u003eThe HD Canyon Trailer is a 15x6 alloy wheel sized and rated for trailer applications running the 5x114.3 (5x4.5) bolt pattern. At 0mm offset, the mounting surface sits exactly at the wheel's centerline, placing the wheel in a neutral, symmetrical position that suits the balanced load demands of trailer use. The 83mm hub bore fits 5x114.3 trailer hubs, and at 21.40 lbs, the Canyon Trailer brings solid alloy construction to a platform where reliability under sustained load matters.\u003c\/p\u003e\u003cp\u003eSplit Ten-Spoke Mesh Design\u003c\/p\u003e\u003cp\u003eThe Canyon Trailer runs a split ten-spoke mesh layout across the face, with each pair of spokes forming a tight, interlocking pattern that gives the wheel visual depth and structure. The spoke faces are machined to a brighter contrast against the gloss black finish, creating a two-tone look that stands out against the trailer's body. Rivets accent the face around the hub area, adding a detail that reinforces the wheel's purposeful character. Lug hardware sits exposed in a circle around the hub bore, visible on the face and part of the overall look rather than hidden behind a cap. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eCast in one piece from alloy, the Canyon Trailer keeps its construction straightforward and dependable. One-piece alloy construction supports the complex mesh spoke geometry in a single continuous form, maintaining structural integrity through the load cycles a trailer wheel sees over long hauls and varied road surfaces. The finish is applied over the full face, with the machined spoke faces providing a contrast that holds up to the elements trailer wheels regularly face.\u003c\/p\u003e\u003cp\u003eFitment for 5x114.3 Trailer Applications\u003c\/p\u003e\u003cp\u003eThe 5x114.3 (5x4.5) bolt pattern covers a wide range of trailer hubs, making the Canyon Trailer a practical fit across utility, boat, and cargo trailer setups. The 15-inch diameter and 6-inch width are a standard trailer sizing, and the 3.5 inches of backspacing positions the wheel evenly within the fender. This wheel is also offered in additional sizes and finishes across the HD lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x114.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e3.5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e83 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack Machined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e21.4 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"HD","offers":[{"title":"Default Title","offer_id":68713085731097,"sku":"CY1560650BK","price":154.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/canyontrailer_blackmachined_white__06131.jpg?v=1794772728"},{"product_id":"15x6-black-milled-wheel-canyon-trailer-5x4-5-0-cy1560650gb-m","title":"Canyon Trailer Black Milled | 15x6 | 5x4.5 0mm Offset | CY1560650GB-M","description":"\u003cp\u003eBuilt for the Trailer Platform\u003c\/p\u003e\u003cp\u003eThe HD Canyon Trailer is a 15x6 alloy wheel sized and drilled specifically for trailer applications running the 5x114.3 (5x4.5) bolt pattern. At 0mm offset, the mounting surface sits exactly at the wheel's centerline, placing the barrel evenly on both sides of the hub for a balanced, symmetrical stance that suits trailer duty. The 83mm hub bore fits 5x114.3 trailer hubs, and the 3.5-inch backspacing keeps the wheel positioned correctly within the fender envelope. At 21.4 lbs, this is a solid alloy build for the application.\u003c\/p\u003e\u003cp\u003eSplit Mesh Design with Milled Spoke Edges\u003c\/p\u003e\u003cp\u003eThe Canyon Trailer runs a split ten-spoke mesh layout, with each pair of spokes forming a tight, interlocking pattern across the face. The Gloss Black finish covers the face and barrel, while the spoke edges are milled to a bright contrast that breaks up the dark field and gives the wheel a finished, intentional look. Rivets accent the face around the hub area, adding a hardware detail that suits the wheel's structured mesh geometry. The lug hardware is exposed and visible on the face, sitting in a circle around the hub bore where the wheel mounts.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eHD builds the Canyon Trailer as a one-piece cast alloy wheel. Cast construction supports the mesh spoke geometry cleanly, holding the split-spoke profile and milled edge detail in a single continuous shape. For a trailer wheel that needs to hold its form load cycle after load cycle, cast alloy delivers the proven structural reliability the application calls for. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eFitment Details\u003c\/p\u003e\u003cp\u003eThe Canyon Trailer fits trailer applications drilled for the 5x114.3 (5x4.5) bolt pattern. The 0mm offset and 3.5-inch backspacing are matched to trailer hub geometry, keeping the wheel centered and the load path straight. This wheel is purpose-built for trailer use and is available in additional sizes and finishes across the HD Canyon Trailer lineup for builds with different hub specs.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x114.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e3.5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e83 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack Milled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e21.4 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"HD","offers":[{"title":"Default Title","offer_id":68713086124313,"sku":"CY1560650GB-M","price":159.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/canyontrailer_blackmilled_white__45205.jpg?v=1794772729"},{"product_id":"15x6-gloss-black-wheel-canyon-trailer-5x4-5-0-cy1560650agb","title":"Canyon Trailer Gloss Black | 15x6 | 5x4.5 0mm Offset | CY1560650AGB","description":"\u003cp\u003eBuilt for the Trailer Platform\u003c\/p\u003e\u003cp\u003eThe HD Canyon Trailer is a 15x6 alloy wheel sized and rated for trailer applications running the 5x114.3 (5x4.5) bolt pattern. With a 3,600-lb load rating, this wheel handles the demands of loaded trailer use without compromise. The 0mm offset places the mounting surface exactly at the wheel's centerline, splitting the 6-inch barrel evenly front to back, with 3.5 inches of backspacing. The 83.1mm hub bore fits 5x114.3 trailer hubs. A center cap is included.\u003c\/p\u003e\u003cp\u003eSplit Ten-Spoke Mesh Design\u003c\/p\u003e\u003cp\u003eThe Canyon Trailer runs a split ten-spoke mesh layout across the face, giving the wheel an open, structured look that suits utility and recreational trailer builds alike. Rivets accent the face, adding a detail that carries through the design without overcomplicating it. Exposed lug hardware sits in a circle around the hub bore at the center of the face, visible once the center cap is removed, keeping the mounting hardware accessible and the look intentional.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eHD built the Canyon Trailer as a one-piece alloy wheel, a construction that delivers reliable long-haul value and consistent structural integrity across load cycles. The one-piece form keeps the wheel's mesh design and hub geometry in a single continuous shape, well-suited to the repetitive stress patterns of trailer use. At 20.73 lbs, the Canyon Trailer brings a practical weight profile for a 15-inch trailer wheel rated to 3,600 lbs.\u003c\/p\u003e\u003cp\u003eGloss Black Finish\u003c\/p\u003e\u003cp\u003eThe gloss black finish gives the Canyon Trailer a clean, uniform appearance that holds up against road film and weather exposure common in trailer environments. No machined or milled surfaces interrupt the finish, keeping the look consistent across the entire face. The result is a straightforward, low-maintenance appearance that works across enclosed, open, and recreational trailer builds.\u003c\/p\u003e\u003cp\u003eFitment Details\u003c\/p\u003e\u003cp\u003eThe 5x114.3 (5x4.5) bolt pattern covers a wide range of trailer hub applications. At 0mm offset on a 6-inch barrel, the wheel sits centered on the hub with equal spacing on both sides of the mounting surface. The 3,600-lb load rating supports loaded trailer configurations, and the 83.1mm hub bore fits the corresponding trailer hub platforms. The Canyon Trailer is also offered in additional sizes and finish options across the HD lineup for builds with different load or fitment requirements.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x114.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e3.5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e83.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eGloss Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e3600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e20.73 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"HD","offers":[{"title":"Default Title","offer_id":68713086550297,"sku":"CY1560650AGB","price":149.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/canyontrailer_glossblack_white__75835.jpg?v=1794772730"},{"product_id":"15x6-milled-black-wheel-canyon-trailer-5x4-5-0-cy1560650ml3","title":"Canyon Trailer Milled Black | 15x6 | 5x4.5 0mm Offset | CY1560650ML3","description":"\u003cp\u003eBuilt for the Trailer Platform\u003c\/p\u003e\u003cp\u003eThe HD Canyon Trailer is a 15x6 alloy wheel sized and rated for trailer applications running the 5x114.3 (5x4.5) bolt pattern. At 0mm offset, the mounting surface sits exactly at the wheel's centerline, placing the barrel evenly on both sides for a balanced, symmetrical profile that suits trailer builds. The 83mm hub bore fits 5x114.3 trailer hubs, and the wheel weighs in at 21.4 lbs. A center cap is included.\u003c\/p\u003e\u003cp\u003eSplit Mesh Design with Milled Spoke Faces\u003c\/p\u003e\u003cp\u003eThe Canyon Trailer carries a split ten-spoke mesh design that gives the face an open, layered look. Each of the ten split spokes runs from the hub area outward, creating the interlocking mesh geometry the design is known for. The lug hardware is exposed and visible on the wheel face, sitting in a circle around the hub bore where the wheel mounts. Rivets accent the face, adding a hardware-forward detail that suits the wheel's utilitarian character.\u003c\/p\u003e\u003cp\u003eGloss Black Finish with Milled Contrast\u003c\/p\u003e\u003cp\u003eThe finish is gloss black with milled spoke faces. The milling removes material from the spoke surfaces to expose the raw aluminum beneath, creating a bright silver contrast against the gloss black surrounding areas. That two-tone result gives the Canyon Trailer a sharper, more finished appearance than a single-color wheel, without adding visual complexity that would feel out of place on a working trailer setup.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eHD builds the Canyon Trailer as a one-piece alloy wheel. Cast alloy construction supports the mesh spoke geometry in a single continuous shape, keeping the face's interlocking spoke pattern structurally intact. At 21.4 lbs, the wheel is appropriately sized for the 15-inch trailer application it was built for. The one-piece build also simplifies maintenance: there are no separate sections or hardware joints to inspect over time.\u003c\/p\u003e\u003cp\u003eFitment for 5x114.3 Trailer Applications\u003c\/p\u003e\u003cp\u003eThe 5x114.3 (5x4.5) bolt pattern covers a wide range of trailer axle hubs, making the Canyon Trailer a practical fit across single-axle and tandem trailer setups running this pattern. The 0mm offset and 3.5 inches of backspacing place the wheel face flush with the hub centerline, a geometry common to trailer applications where even weight distribution across the hub matters. The Canyon Trailer is also offered in additional sizes and finishes across the HD lineup for builds with different fitment requirements.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x114.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e3.5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e83 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eMilled Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e21.4 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"HD","offers":[{"title":"Default Title","offer_id":68713086910745,"sku":"CY1560650ML3","price":169.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/canyontrailer_milledblack_white__55752.jpg?v=1794772731"},{"product_id":"15x6-silver-machined-wheel-canyon-trailer-6x5-5-0-cy1560830sm","title":"Canyon Trailer Silver Machined | 15x6 | 6x5.5 0mm Offset | CY1560830SM","description":"\u003cp\u003eBuilt for the 6x139.7 Trailer Platform\u003c\/p\u003e\u003cp\u003eThe HD Canyon Trailer is a 15x6 alloy wheel drilled for the 6x139.7 (6x5.5) bolt pattern, covering a wide range of trailer applications that share this common 6-lug pattern. At 0mm offset, the mounting surface sits exactly at the wheel's centerline, placing the barrel evenly between the hub face and the outer edge for a balanced, symmetrical profile suited to trailer use. The 108mm hub bore fits 6x139.7 trailer hubs, and the 3,600-lb load rating gives this wheel the capacity to handle serious hauling demands. Backspacing measures 3.5 inches. A center cap is included.\u003c\/p\u003e\u003cp\u003eSplit Ten-Spoke Mesh Design\u003c\/p\u003e\u003cp\u003eThe Canyon Trailer runs a split ten-spoke mesh layout across the face, with each pair of spokes branching outward from the hub area to create an open, interlocking pattern. Rivets accent the face, adding a detail that suits the wheel's structured geometry. Lug hardware is exposed and visible on the face, sitting in a circle around the hub bore where the wheel mounts. The combination of the mesh spoke pattern, rivets, and exposed lugs gives the Canyon Trailer a purposeful, finished appearance that stands apart from plain steel trailer wheels.\u003c\/p\u003e\u003cp\u003eGloss Silver with Machined Spoke Faces\u003c\/p\u003e\u003cp\u003eThe finish is gloss silver across the wheel body, with the spoke faces machined to a brighter, contrasting tone. The machined surfaces bring out the spoke geometry and add visual definition to the split mesh pattern without requiring a two-tone paint scheme. This finish holds up well in the outdoor and road-exposure conditions typical of trailer use, and the contrast between the gloss silver areas and the machined spokes keeps the wheel looking intentional on any trailer build.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eHD builds the Canyon Trailer as a one-piece alloy wheel, a construction that suits the consistent load cycles and long-haul demands of trailer applications. One-piece alloy carries the split mesh design and spoke geometry in a single continuous form, keeping the structure intact through repeated loading without the complexity of multi-piece assembly. At 23.6 lbs, the Canyon Trailer delivers the structural integrity the 3,600-lb load rating requires while keeping unsprung weight reasonable for trailer handling.\u003c\/p\u003e\u003cp\u003eFitment Details\u003c\/p\u003e\u003cp\u003eThe 6x139.7 (6x5.5) bolt pattern is one of the most common 6-lug patterns in the trailer market, shared across a broad range of utility, boat, and cargo trailer axle configurations. The 0mm offset and 3.5-inch backspacing place this wheel in a centered position on the hub, which is the standard geometry for most trailer axle setups. The Canyon Trailer is also offered in additional sizes and finish options across the HD lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e3.5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e108 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSilver Machined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e3600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e23.6 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eChevrolet Silverado 1500 2007-2026\u003c\/li\u003e\n\u003cli\u003eChevrolet Silverado 1500 LD 2019-2019\u003c\/li\u003e\n\u003cli\u003eChevrolet Silverado 1500 LTD 2022-2022\u003c\/li\u003e\n\u003cli\u003eChevrolet Silverado 1500 Nueva 2022-2022\u003c\/li\u003e\n\u003cli\u003eChevrolet Suburban 2014-2026\u003c\/li\u003e\n\u003cli\u003eChevrolet Suburban 1500 2007-2014\u003c\/li\u003e\n\u003cli\u003eChevrolet Tahoe 2007-2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HD","offers":[{"title":"Default Title","offer_id":68713087303961,"sku":"CY1560830SM","price":164.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/canyontrailer_silvermachined_white__18616.jpg?v=1794772732"},{"product_id":"20x9-satin-black-wheel-canyon-trailer-6x135-6x5-5-0-cy2090830asb","title":"Canyon Trailer Satin Black | 20x9 | 6x135\/6x5.5 0mm Offset | CY2090830ASB","description":"\u003cp\u003eBuilt for Ford and GM Trailer Platforms\u003c\/p\u003e\u003cp\u003eFord F-150, Expedition, and Navigator owners (2004-present) share the 6x135 bolt pattern with this wheel, while Chevy Silverado 1500, GMC Sierra 1500, Tahoe, Suburban, Yukon, and Escalade owners running the 6x139.7 (6x5.5) pattern are covered by the secondary drilling. The dual-drilled 20x9 HD Canyon Trailer spans both of these major six-lug platforms in a single wheel, making it a practical choice for trailer builds that need to match across a mixed fleet or swap between tow vehicles. The 108mm hub bore fits both bolt-pattern groups, and the 3,600-lb load rating is sized for the demands of trailer service.\u003c\/p\u003e\u003cp\u003eSplit Ten-Spoke Mesh Design\u003c\/p\u003e\u003cp\u003eThe Canyon Trailer runs a split ten-spoke mesh layout across the face, with each spoke pairing fanning outward from the hub in a tight, open mesh pattern. Rivets accent the face, adding a hardware-forward detail that suits the utilitarian character of a trailer build. Lug hardware sits exposed around the hub bore, visible on the face and adding to the purposeful, no-nonsense look this wheel carries on a working trailer. A center cap is included.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eThe Canyon Trailer is cast in one-piece alloy, a construction that supports the complex mesh spoke geometry and keeps the design structurally sound across the load cycles a trailer wheel sees in regular service. At 35.9 lbs, the wheel brings the reliable long-haul value that cast alloy is known for, with the 3,600-lb load rating to back it up on loaded trailer applications.\u003c\/p\u003e\u003cp\u003eFitment for 6x135 and 6x139.7 Platforms\u003c\/p\u003e\u003cp\u003eAt 20 inches in diameter and 9 inches wide with a 0mm offset, the mounting surface sits exactly at the wheel's centerline, placing the wheel face and the inner barrel in equal balance on either side of the hub. Zero offset is a neutral, symmetrical position that works across a wide range of trailer hub setups without pushing the wheel outward or pulling it inward. Backspacing measures 5 inches. The Canyon Trailer is also offered in additional sizes and configurations across the HD lineup to suit different trailer builds and bolt-pattern needs.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x135 \/ 6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e108 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSatin Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e3600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e40 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"HD","offers":[{"title":"Default Title","offer_id":68713087729945,"sku":"CY2090830ASB","price":309.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/canyontrailer_satinblack_white__79365.jpg?v=1794772733"},{"product_id":"15x6-white-machined-wheel-canyon-trailer-6x5-5-0-cy1560830wm","title":"Canyon Trailer White Machined | 15x6 | 6x5.5 0mm Offset | CY1560830WM","description":"\u003cp\u003eBuilt for the 6x139.7 Trailer Platform\u003c\/p\u003e\u003cp\u003eThe HD Canyon Trailer is a 15x6 alloy wheel drilled for the 6x139.7 (6x5.5) bolt pattern, covering a wide range of trailer axle hubs that share this common 6-lug spacing. At 0mm offset, the mounting surface sits exactly at the wheel's centerline, placing the barrel evenly on both sides of the hub for a balanced, symmetrical profile. The 108mm hub bore fits 6x139.7 trailer hubs, and the 3.5-inch backspacing positions the wheel squarely within the fender envelope. At 21.4 lbs, the Canyon Trailer keeps rotating weight in check for a trailer application where consistent load management matters.\u003c\/p\u003e\u003cp\u003eSplit Ten-Spoke Mesh Design\u003c\/p\u003e\u003cp\u003eThe Canyon Trailer runs a split ten-spoke mesh layout across the face, with each pair of spokes branching outward from the hub area in a tight, interwoven pattern. The mesh geometry gives the wheel visual structure without adding unnecessary mass, and the open spacing between spoke pairs keeps the face from looking heavy on a 15-inch diameter. Rivets accent the face, adding a hardware-forward detail that suits the working character of a trailer build. Exposed lug hardware sits in a ring around the hub bore, visible on the face and adding to the utilitarian, purposeful look of the design.\u003c\/p\u003e\u003cp\u003eGloss White with Machined Spoke Faces\u003c\/p\u003e\u003cp\u003eThe finish pairs a gloss white background with machined spoke faces, where the machining cuts through to a brighter, contrasting surface on each spoke. The result is a two-tone appearance that gives the wheel definition without relying on a complex color scheme. Gloss white holds up well in outdoor and road-exposure conditions typical of trailer use, and the machined surfaces add visual contrast that keeps the wheel from reading as a plain single-color piece. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eThe Canyon Trailer is cast in one-piece alloy, a construction that suits the consistent load cycles and long-haul demands of trailer applications. One-piece casting integrates the hub, spokes, and barrel into a single continuous structure, eliminating the joint points that multi-piece assemblies introduce. For a trailer wheel that spends its life under steady load rather than performance driving, this construction delivers reliable structural integrity at a practical weight. The Canyon Trailer is also offered in additional sizes and finishes across the HD lineup, covering a range of trailer fitment needs beyond this 15x6 combination.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e3.5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e108 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eWhite Machined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e21.4 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eChevrolet Silverado 1500 2007-2026\u003c\/li\u003e\n\u003cli\u003eChevrolet Silverado 1500 LD 2019-2019\u003c\/li\u003e\n\u003cli\u003eChevrolet Silverado 1500 LTD 2022-2022\u003c\/li\u003e\n\u003cli\u003eChevrolet Silverado 1500 Nueva 2022-2022\u003c\/li\u003e\n\u003cli\u003eChevrolet Suburban 2014-2026\u003c\/li\u003e\n\u003cli\u003eChevrolet Suburban 1500 2007-2014\u003c\/li\u003e\n\u003cli\u003eChevrolet Tahoe 2007-2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HD","offers":[{"title":"Default Title","offer_id":68713088155929,"sku":"CY1560830WM","price":164.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/canyontrailer_whitemachined_white__14458.jpg?v=1794772734"},{"product_id":"16x6-black-machined-wheel-canyon-trailer-6x5-5-0-cy1660830bk","title":"Canyon Trailer Black Machined | 16x6 | 6x5.5 0mm Offset | CY1660830BK","description":"\u003cp\u003eBuilt for the 6x139.7 Trailer Platform\u003c\/p\u003e\u003cp\u003eThe HD Canyon Trailer is a 16x6 alloy wheel drilled for the 6x139.7 (6x5.5) bolt pattern, covering a wide range of trailer applications that share this common 6-lug pattern. At 0mm offset, the mounting surface sits exactly at the wheel's centerline, placing the barrel evenly between the hub face and the outer edge for a balanced, symmetrical profile. The 108mm hub bore fits 6x139.7 trailer hubs, and the 3.5-inch backspacing matches the centered mounting position. At 25.6 lbs, this one-piece alloy wheel brings a meaningful weight advantage over steel alternatives without sacrificing structural integrity for towing and hauling duty.\u003c\/p\u003e\u003cp\u003eSplit Mesh Design with Exposed Hardware\u003c\/p\u003e\u003cp\u003eThe Canyon Trailer runs a split 10-spoke mesh layout across the face, with each pair of spokes forming a tight, interwoven pattern that gives the wheel visual depth and a purposeful, finished look on utility trailers. The lug hardware is exposed and visible around the hub area, sitting in a circle at the center of the face where the wheel mounts to the hub. Rivets accent the face, adding a detail that elevates the Canyon Trailer beyond a purely functional trailer wheel. The non-concave face keeps the profile flat and clean, suited to the trailer application.\u003c\/p\u003e\u003cp\u003eGloss Black with Machined Spoke Faces\u003c\/p\u003e\u003cp\u003eThe finish pairs a gloss black background with machined spoke faces, creating a two-tone contrast that gives the wheel a sharp, intentional look. The machined surfaces on the spokes cut through the gloss black to expose the bright aluminum underneath, adding visual dimension without relying on chrome or polished finishes that require more upkeep. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eHD builds the Canyon Trailer as a one-piece alloy wheel, a construction that suits the demands of trailer service well. One-piece alloy holds the spoke geometry and face detail in a single continuous form, keeping the wheel structurally sound through repeated load cycles and road stress. The alloy material resists corrosion better than bare steel and holds the machined finish cleanly over time. This wheel is also offered in additional sizes and finishes across the HD lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e3.5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e108 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack Machined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e25.6 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eChevrolet Silverado 1500 2007-2026\u003c\/li\u003e\n\u003cli\u003eChevrolet Silverado 1500 LD 2019-2019\u003c\/li\u003e\n\u003cli\u003eChevrolet Silverado 1500 LTD 2022-2022\u003c\/li\u003e\n\u003cli\u003eChevrolet Silverado 1500 Nueva 2022-2022\u003c\/li\u003e\n\u003cli\u003eChevrolet Suburban 2014-2026\u003c\/li\u003e\n\u003cli\u003eChevrolet Suburban 1500 2007-2014\u003c\/li\u003e\n\u003cli\u003eChevrolet Tahoe 2007-2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HD","offers":[{"title":"Default Title","offer_id":68713088549145,"sku":"CY1660830BK","price":194.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/canyontrailer_blackmachined_white__36189.jpg?v=1794772736"},{"product_id":"16x6-silver-machined-wheel-canyon-trailer-6x5-5-0-cy1660830sm","title":"Canyon Trailer Silver Machined | 16x6 | 6x5.5 0mm Offset | CY1660830SM","description":"\u003cp\u003eBuilt for the 6x139.7 Trailer Platform\u003c\/p\u003e\u003cp\u003eThe HD Canyon Trailer is a 16x6 alloy wheel sized and rated for trailer applications running the 6x139.7 (6x5.5) bolt pattern. At 0mm offset, the mounting surface sits exactly at the wheel's centerline, placing the wheel in a neutral, symmetrical position that suits trailer axle geometry. The 108mm hub bore fits 6x139.7 trailer hubs, and the 3,600-lb load rating gives this wheel the capacity to handle the demands of loaded trailer use. Backspacing measures 3.5 inches. At just under 25 lbs, the Canyon Trailer brings solid alloy construction without unnecessary bulk.\u003c\/p\u003e\u003cp\u003eSplit Ten-Spoke Mesh Design\u003c\/p\u003e\u003cp\u003eThe Canyon Trailer's face runs a split ten-spoke mesh pattern, with each pair of spokes branching outward from the hub in a tight, interlocking layout that gives the wheel visual structure and depth. Rivets accent the face around the hub area, adding a hardware-forward detail that suits the utilitarian character of a well-finished trailer build. The lug hardware is exposed and visible on the face, sitting in a circle around the hub bore where the wheel mounts to the axle. The spoke faces are machined to a brighter contrast against the gloss silver surfaces, giving the Canyon Trailer a two-tone finish that stands out against the trailer's profile. A center cap is included.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eThe Canyon Trailer is cast in one-piece alloy, a construction that supports the complex split-spoke mesh geometry across the full face in a single continuous shape. Cast alloy handles the spoke branching, hub detailing, and rivet accents without the assembly complexity of multi-piece construction, keeping the wheel consistent and reliable across load cycles. The one-piece build also keeps the overall weight in check for a 16-inch trailer wheel at this load rating.\u003c\/p\u003e\u003cp\u003eFitment for Trailer Builds on 6x139.7 Axles\u003c\/p\u003e\u003cp\u003eThe 6x139.7 (6x5.5) bolt pattern is one of the most common six-lug patterns in trailer axle applications, shared across a wide range of utility, cargo, and recreational trailer platforms. The Canyon Trailer's 0mm offset and 108mm hub bore are matched to this axle family, making it a straightforward fit for trailers running this pattern. The 3,600-lb load rating supports loaded hauling demands across the range of trailer types this bolt pattern serves. The Canyon Trailer is also offered in additional sizes and finish options to cover other trailer configurations.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e3.5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e108 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSilver Machined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e3600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e24.92 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eChevrolet Silverado 1500 2007-2026\u003c\/li\u003e\n\u003cli\u003eChevrolet Silverado 1500 LD 2019-2019\u003c\/li\u003e\n\u003cli\u003eChevrolet Silverado 1500 LTD 2022-2022\u003c\/li\u003e\n\u003cli\u003eChevrolet Silverado 1500 Nueva 2022-2022\u003c\/li\u003e\n\u003cli\u003eChevrolet Suburban 2014-2026\u003c\/li\u003e\n\u003cli\u003eChevrolet Suburban 1500 2007-2014\u003c\/li\u003e\n\u003cli\u003eChevrolet Tahoe 2007-2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HD","offers":[{"title":"Default Title","offer_id":68713088975129,"sku":"CY1660830SM","price":194.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/canyontrailer_silvermachined_white__89910.jpg?v=1794772737"},{"product_id":"20x9-black-machined-wheel-canyon-trailer-6x5-5-0-cy2090830bk","title":"Canyon Trailer Black Machined | 20x9 | 6x5.5 0mm Offset | CY2090830BK","description":"\u003cp\u003eBuilt for the 6x139.7 Trailer Platform\u003c\/p\u003e\u003cp\u003eThe HD Canyon Trailer is a 20x9 alloy wheel drilled for the 6x139.7 (6x5.5) bolt pattern, covering the wide range of trailer axles and tow-behind applications that share this six-lug spacing. At 0mm offset, the mounting surface sits exactly at the wheel's centerline, placing the barrel evenly on both sides of the hub for a balanced, symmetrical stance. The 108mm hub bore fits 6x139.7 trailer hubs, and the 3,600-lb load rating gives this wheel the capacity to handle serious towing demands. Backspacing measures 5 inches. A center cap is included.\u003c\/p\u003e\u003cp\u003eSplit Ten-Spoke Mesh Design\u003c\/p\u003e\u003cp\u003eThe Canyon Trailer runs a split ten-spoke mesh layout across the face, with each spoke pairing branching outward from the hub area in a tight, interlocking pattern. The mesh geometry gives the face visual density and structure without closing off the disc entirely, keeping the look purposeful on utility-focused builds. Rivets accent the face, adding a hardware-forward detail that suits the wheel's working character. Exposed lug hardware sits in a circle around the hub bore at the center of the face, visible once the center cap is removed, adding to the industrial aesthetic.\u003c\/p\u003e\u003cp\u003eGloss Black with Machined Spoke Faces\u003c\/p\u003e\u003cp\u003eThe finish pairs a gloss black background with machined spoke faces, where the spoke surfaces have been cut to a brighter, contrasting tone against the darker surrounding areas. The two-tone result gives the Canyon Trailer a sharp, defined look that holds up across road grime and weather without demanding constant upkeep. The machined surfaces bring contrast and depth to the mesh pattern, making the split-spoke geometry stand out clearly.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eHD builds the Canyon Trailer as a one-piece alloy wheel, a construction that suits the demands of trailer duty well. One-piece alloy keeps the structure unified from hub to barrel, with no seams or fastened joints to maintain over time. At 35.8 lbs, the wheel carries the structural integrity the 3,600-lb load rating requires while remaining a practical choice for trailer applications where long-haul reliability matters more than weight savings. The one-piece format also supports the complex mesh design geometry, holding the split-spoke detail in a single continuous casting.\u003c\/p\u003e\u003cp\u003eFitment Details\u003c\/p\u003e\u003cp\u003eThe 6x139.7 (6x5.5) bolt pattern is one of the most common six-lug spacings in the trailer market, shared across a broad range of utility, cargo, and recreational tow-behind axles. The 0mm offset and 5-inch backspacing place the wheel face flush with the hub centerline, a neutral position that works across a wide variety of trailer fender and axle setups. The Canyon Trailer is also offered in additional sizes and finishes across the HD lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e108 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack Machined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e3600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e39 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eChevrolet Silverado 1500 2007-2026\u003c\/li\u003e\n\u003cli\u003eChevrolet Silverado 1500 LD 2019-2019\u003c\/li\u003e\n\u003cli\u003eChevrolet Silverado 1500 LTD 2022-2022\u003c\/li\u003e\n\u003cli\u003eChevrolet Silverado 1500 Nueva 2022-2022\u003c\/li\u003e\n\u003cli\u003eChevrolet Suburban 2014-2026\u003c\/li\u003e\n\u003cli\u003eChevrolet Suburban 1500 2007-2014\u003c\/li\u003e\n\u003cli\u003eChevrolet Tahoe 2007-2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HD","offers":[{"title":"Default Title","offer_id":68713089368345,"sku":"CY2090830BK","price":309.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/canyontrailer_blackmachined_white__30809.jpg?v=1794772738"},{"product_id":"20x9-black-milled-wheel-canyon-trailer-6x5-5-0-cy2090830gb-m","title":"Canyon Trailer Black Milled | 20x9 | 6x5.5 0mm Offset | CY2090830GB-M","description":"\u003cp\u003eBuilt for the 6x139.7 Platform\u003c\/p\u003e\u003cp\u003eThe HD Canyon Trailer is a 20x9 alloy wheel drilled for the 6x139.7 (6x5.5) bolt pattern, covering a wide range of full-size truck and trailer applications including Chevrolet Silverado 1500, GMC Sierra 1500, Tahoe, Suburban, Yukon, Toyota Tacoma, Tundra, 4Runner, Nissan Titan, and similar platforms. The 108mm hub bore fits these applications, and the 3,600-lb load rating makes this wheel well-suited for trailer duty where payload capacity matters. At 0mm offset, the mounting surface sits exactly at the wheel's centerline, placing the wheel in a neutral, balanced position relative to the hub.\u003c\/p\u003e\u003cp\u003eSplit Ten-Spoke Mesh Design\u003c\/p\u003e\u003cp\u003eThe Canyon Trailer runs a split ten-spoke mesh layout across the face, with each pair of spokes forming a tight, interwoven pattern that gives the wheel visual density without closing off the design. Milled spoke edges cut through the gloss black finish to expose the raw aluminum beneath, creating a two-tone contrast that sharpens the overall look. Rivets accent the face around the hub area, adding a hardware-forward detail that suits the wheel's utilitarian character. Lug hardware is exposed and visible on the face, sitting in a circle around the hub bore where the wheel mounts to the vehicle. A center cap is included.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eHD builds the Canyon Trailer as a one-piece cast alloy wheel, a construction that supports the complex mesh spoke geometry and milled edge detail in a single continuous form. Cast alloy handles the deep spoke intersections and surface milling without the structural compromises that come from assembling multiple sections. At 35.8 lbs, the wheel carries the structural integrity needed for trailer load cycles, and the one-piece form keeps the design consistent from hub to barrel. The 5-inch backspacing matches the 0mm offset on this 9-inch-wide wheel.\u003c\/p\u003e\u003cp\u003eFitment for Trailer and Truck Applications\u003c\/p\u003e\u003cp\u003eThe 6x139.7 bolt pattern is one of the most common 6-lug patterns across full-size truck and trailer platforms, and the Canyon Trailer's 3,600-lb load rating positions it for trailer use where higher per-wheel capacity is a real requirement. The 20-inch diameter and 9-inch width suit trailer builds that want a larger-diameter wheel without pushing into aggressive outboard offset territory. The neutral 0mm offset keeps the wheel centered, which works well for trailer axle applications where even weight distribution across the hub is the priority.\u003c\/p\u003e\u003cp\u003eAdditional Configurations Available\u003c\/p\u003e\u003cp\u003eThe Canyon Trailer is offered in additional sizes and finish options beyond this 20x9 gloss black milled version, so if this combination does not match your build, other configurations in the lineup may cover your needs.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e108 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack Milled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e3600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e39 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"HD","offers":[{"title":"Default Title","offer_id":68713089663257,"sku":"CY2090830GB-M","price":309.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/canyontrailer_blackmilled_white__23826.jpg?v=1794772739"},{"product_id":"20x9-gunmetal-machined-wheel-canyon-trailer-6x5-5-0-cy2090830gmk","title":"Canyon Trailer Gunmetal Machined | 20x9 | 6x5.5 0mm Offset | CY2090830GMK","description":"\u003cp\u003eBuilt for the 6x139.7 Trailer Platform\u003c\/p\u003e\u003cp\u003eThe HD Canyon Trailer brings a sharp, truck-styled look to trailer applications running the 6x139.7 (6x5.5) bolt pattern. At 20 inches in diameter and 9 inches wide with a 0mm offset, the mounting surface sits exactly at the wheel's centerline, keeping the stance neutral and balanced on both sides of the axle. The 108mm hub bore fits 6x139.7 trailer hubs, and the 3,600-lb load rating gives this wheel the capacity to handle serious towing demands. Backspacing measures 5 inches, placing the wheel evenly within the fender profile.\u003c\/p\u003e\u003cp\u003eSplit Ten-Spoke Mesh Design\u003c\/p\u003e\u003cp\u003eThe Canyon Trailer runs a split ten-spoke mesh pattern across the face, giving it the kind of open, layered geometry that suits a well-appointed trailer build. Each pair of spokes branches outward from the hub area, creating a tight mesh of negative space that adds visual depth without overcomplicating the design. Rivets accent the face, adding a hardware-forward detail that fits the working character of the wheel. Lug hardware sits exposed around the hub bore, visible on the face and adding to the purposeful, functional look of the overall design.\u003c\/p\u003e\u003cp\u003eGloss Gunmetal with Machined Spoke Faces\u003c\/p\u003e\u003cp\u003eThe finish is gloss gunmetal across the wheel body, with the spoke faces machined to a brighter, contrasting tone. That two-tone result gives the Canyon Trailer a clean, intentional appearance that holds up against road grime and weather without demanding constant attention. The machined surfaces bring out the spoke geometry and make the split-spoke pattern stand out against the darker gunmetal background. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eHD builds the Canyon Trailer as a one-piece alloy wheel, a construction that suits the consistent load cycles and long-haul demands of trailer use. Cast alloy supports the complex split-spoke mesh geometry in a single continuous shape, keeping the design structurally sound from hub to barrel. At 35.8 lbs, the wheel carries the structural integrity the 3,600-lb load rating requires across the full range of trailer applications this bolt pattern serves.\u003c\/p\u003e\u003cp\u003eFitment Across the 6x139.7 Trailer Lineup\u003c\/p\u003e\u003cp\u003eThe 6x139.7 (6x5.5) bolt pattern is one of the most common six-lug patterns in the trailer market, shared across a wide range of utility, cargo, and recreational trailer axle configurations. The 0mm offset and 5-inch backspacing keep the wheel centered on the axle, making this a straightforward fit for trailers spec'd to this pattern. The Canyon Trailer is also offered in additional sizes and finish options across the HD lineup for builds with different dimensional requirements.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e108 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eGunmetal Machined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e3600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e39 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eChevrolet Silverado 1500 2007-2026\u003c\/li\u003e\n\u003cli\u003eChevrolet Silverado 1500 LD 2019-2019\u003c\/li\u003e\n\u003cli\u003eChevrolet Silverado 1500 LTD 2022-2022\u003c\/li\u003e\n\u003cli\u003eChevrolet Silverado 1500 Nueva 2022-2022\u003c\/li\u003e\n\u003cli\u003eChevrolet Suburban 2014-2026\u003c\/li\u003e\n\u003cli\u003eChevrolet Suburban 1500 2007-2014\u003c\/li\u003e\n\u003cli\u003eChevrolet Tahoe 2007-2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HD","offers":[{"title":"Default Title","offer_id":68713090122009,"sku":"CY2090830GMK","price":309.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/canyontrailer_gunmetalmachined_white__35387.jpg?v=1794772740"},{"product_id":"20x9-milled-black-wheel-canyon-trailer-6x5-5-0-cy2090830ml3","title":"Canyon Trailer Milled Black | 20x9 | 6x5.5 0mm Offset | CY2090830ML3","description":"\u003cp\u003eBuilt for the 6x139.7 Platform\u003c\/p\u003e\u003cp\u003eThe HD Canyon Trailer is a 20x9 alloy wheel drilled for the 6x139.7 (6x5.5) bolt pattern, covering a wide range of trailer applications that share this common 6-lug pattern. At 0mm offset, the mounting surface sits exactly at the wheel's centerline, placing the barrel evenly split between inboard and outboard. The 5-inch backspacing matches that centered position, and the 108mm hub bore fits 6x139.7 platforms. With a 3,600-lb load rating, this wheel is sized for the demands of trailer duty where payload capacity matters.\u003c\/p\u003e\u003cp\u003eSplit Ten-Spoke Mesh Design\u003c\/p\u003e\u003cp\u003eThe Canyon Trailer runs a split ten-spoke mesh layout across the face, with each pair of spokes branching outward from the hub in a tight, interwoven pattern. The spoke faces are milled to a bright contrast against the gloss black finish, giving the wheel a two-tone look that holds up visually at any angle. Rivets accent the face near the hub area, adding a hardware detail that suits the wheel's utilitarian character. Lug hardware is exposed and visible on the face, sitting in a circle around the hub bore where the wheel mounts. A center cap is included.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eHD builds the Canyon Trailer as a one-piece alloy wheel, a construction that suits the consistent load cycles and long-haul demands of trailer use. One-piece alloy keeps the structure unified from hub to barrel, with no seams or fasteners between sections to maintain over time. At 35.8 lbs, the wheel carries the structural integrity the 3,600-lb load rating requires without unnecessary bulk.\u003c\/p\u003e\u003cp\u003eFinish and Face Detail\u003c\/p\u003e\u003cp\u003eThe gloss black finish covers the barrel and the areas between spokes, while the milled spoke faces cut through to a brighter aluminum surface for contrast. Milling removes material from the spoke faces in precise passes, producing a clean, machined look that pairs well with the gloss black surrounding it. The result is a finish combination that holds its character across trailer builds where appearance and durability both count.\u003c\/p\u003e\u003cp\u003eFitment Details\u003c\/p\u003e\u003cp\u003eThe 6x139.7 (6x5.5) bolt pattern is one of the most common 6-lug patterns in the trailer market, shared with platforms across GM full-size trucks and SUVs, Toyota Tundra, Tacoma, 4Runner, Nissan Titan, and similar applications. The Canyon Trailer is also offered in additional sizes, widths, and finish options across the HD lineup to cover a range of trailer builds and bolt-pattern needs.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e108 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eMilled Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e3600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e39 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"HD","offers":[{"title":"Default Title","offer_id":68713090482457,"sku":"CY2090830ML3","price":309.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/canyontrailer_milledblack_white__53243.jpg?v=1794772741"},{"product_id":"16x6-black-milled-wheel-canyon-trailer-8x6-5-0-cy1660820gb-m","title":"Canyon Trailer Black Milled | 16x6 | 8x6.5 0mm Offset | CY1660820GB-M","description":"\u003cp\u003eBuilt for the 8x165.1 (8x6.5) Pattern\u003c\/p\u003e\u003cp\u003eThe HD Canyon Trailer is a 16x6 alloy wheel drilled for the 8x165.1 (8x6.5) bolt pattern, a fitment shared by older Chevy and GMC 2500 HD and 3500 platforms (pre-2011 HD trim), older Dodge Ram 2500 and 3500 (pre-2003), and Ford F-250 and F-350 (pre-1998). The 128.60mm hub bore fits these heavy-duty trailer applications, and the 0mm offset places the mounting surface exactly at the wheel's centerline, splitting the 6-inch barrel evenly with 3.5 inches of backspacing on each side. At 25.60 lbs, this is a solid alloy build sized for trailer duty.\u003c\/p\u003e\u003cp\u003eSplit-Spoke Mesh Design with Exposed Hardware\u003c\/p\u003e\u003cp\u003eThe Canyon Trailer runs a split ten-spoke mesh layout across the face, with each pair of spokes branching outward from the hub in a tight, interlocking pattern. The milled spoke edges cut a bright contrast line along each spoke against the gloss black finish, giving the wheel a sharp, two-tone look without any painted accents. Lug hardware sits exposed around the hub bore, visible on the face in a circle around the center mount. A center cap is included with this wheel, covering the hub area when installed.\u003c\/p\u003e\u003cp\u003eGloss Black with Milled Spoke Edges\u003c\/p\u003e\u003cp\u003eThe finish is gloss black across the face and barrel, with the spoke edges milled to a bright aluminum contrast. Rivets accent the face, adding a detail that suits the mesh design's structured geometry. The milled edges stay crisp against the gloss black background, and the overall look holds up well on trailer builds where a clean, finished appearance matters as much as durability.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eHD builds the Canyon Trailer as a one-piece alloy wheel, a construction that suits the split-spoke mesh design well. The single-piece form carries the spoke geometry and milled edge detail in a continuous structure, keeping the face's tight mesh pattern intact through the load cycles a trailer application demands. One-piece alloy construction delivers reliable long-haul value and consistent structural integrity across the wheel's service life.\u003c\/p\u003e\u003cp\u003eFitment Details\u003c\/p\u003e\u003cp\u003eAt 16x6 with a 0mm offset, the Canyon Trailer sits centered on the hub with equal spacing front and back. The 8x165.1 (8x6.5) bolt pattern covers a specific range of older heavy-duty truck and trailer platforms, so confirm your trailer's bolt pattern and hub bore before ordering. The Canyon Trailer is also offered in additional sizes and finish options across the HD lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e8x165.1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e3.5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e128.6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack Milled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e25.6 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"HD","offers":[{"title":"Default Title","offer_id":68713090875673,"sku":"CY1660820GB-M","price":204.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/canyontrailer_blackmilled_white__12831.jpg?v=1794772742"},{"product_id":"16x6-gloss-black-wheel-canyon-trailer-8x6-5-0-cy1660820agb","title":"Canyon Trailer Gloss Black | 16x6 | 8x6.5 0mm Offset | CY1660820AGB","description":"\u003cp\u003eBuilt for the 8x165.1 (8x6.5) Trailer Platform\u003c\/p\u003e\u003cp\u003eThe HD Canyon Trailer is a 16x6 alloy wheel drilled for the 8x165.1 (8x6.5) bolt pattern, covering older Chevy\/GMC 2500 HD and 3500 platforms (pre-2011 HD trim), older Dodge Ram 2500\/3500 (pre-2003), and Ford F-250\/F-350 (pre-1998) trailer applications. The 128.60mm hub bore fits these heavy-duty trailer hubs, and the 4,000-lb load rating is built to handle the sustained demands of trailer service. At 0mm offset, the mounting surface sits exactly at the wheel's centerline, placing the wheel in a neutral, symmetrical position relative to the hub.\u003c\/p\u003e\u003cp\u003eSplit Ten-Spoke Mesh Design\u003c\/p\u003e\u003cp\u003eThe Canyon Trailer runs a split ten-spoke mesh layout across the face, with each pair of spokes branching outward from the hub area in a tight, interlocking pattern. Rivets accent the face near the hub, adding a hardware detail that suits the working character of a heavy-duty trailer wheel. Lug hardware is exposed and visible on the face, sitting in a circle around the hub bore where the wheel mounts. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eThe Canyon Trailer is cast as a single piece in alloy, a construction that supports the complex mesh spoke geometry across the face while keeping the wheel's profile consistent through load cycles. At 25.14 lbs, the alloy build delivers reliable structural integrity for trailer duty without unnecessary bulk. One-piece construction also means there are no seams or fasteners between sections to monitor over time.\u003c\/p\u003e\u003cp\u003eGloss Black Finish\u003c\/p\u003e\u003cp\u003eThe gloss black finish covers the entire wheel in a clean, uniform coat that holds up against road film and weather exposure common in trailer use. The finish suits utility-focused builds where a sharp, consistent appearance matters without requiring extra maintenance. The split mesh design and exposed lug hardware stand out clearly against the gloss black surface.\u003c\/p\u003e\u003cp\u003eFitment Details\u003c\/p\u003e\u003cp\u003eAt 16x6 with 3.5 inches of backspacing and a 0mm offset, the Canyon Trailer is sized for trailer applications where a narrower, centered wheel position is the standard. The 4,000-lb load rating and 8x165.1 (8x6.5) bolt pattern make this wheel a capable fit for heavy-duty trailer hubs across the platforms listed above. The HD Canyon Trailer is also offered in additional sizes and finish options to cover a range of trailer fitment needs.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e8x165.1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e3.5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e128.6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eGloss Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e4000 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e25.14 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"HD","offers":[{"title":"Default Title","offer_id":68713091268889,"sku":"CY1660820AGB","price":184.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/canyontrailer_glossblack_white__23360.jpg?v=1794772743"},{"product_id":"16x6-milled-black-wheel-canyon-trailer-8x6-5-0-cy1660820ml3","title":"Canyon Trailer Milled Black | 16x6 | 8x6.5 0mm Offset | CY1660820ML3","description":"\u003cp\u003eBuilt for the 8x165.1 (8x6.5) Trailer Platform\u003c\/p\u003e\u003cp\u003eThe HD Canyon Trailer is a 16x6 alloy wheel drilled for the 8x165.1 (8x6.5) bolt pattern, covering older Chevy\/GMC 2500 HD and 3500 platforms (pre-2011 HD trim), older Dodge Ram 2500\/3500 (pre-2003), and Ford F-250\/F-350 (pre-1998) trailer applications. The 128.60mm hub bore fits these 8-lug platforms, and the 0mm offset places the mounting surface exactly at the wheel's centerline, splitting the 6-inch barrel evenly front to back with 3.5 inches of backspacing on each side. That centered geometry is a practical choice for trailer duty, where even load distribution across the hub matters more than outboard stance.\u003c\/p\u003e\u003cp\u003eSplit Mesh Design with Exposed Lug Hardware\u003c\/p\u003e\u003cp\u003eThe Canyon Trailer runs a split 10-spoke mesh layout across the face, with each pair of spokes branching outward from the hub area in a tight, interlocking pattern. The design keeps the face visually open without sacrificing the structural depth the mesh geometry provides. Lug hardware sits exposed in a circle around the hub bore, visible on the face and adding a purposeful, hardware-forward look to the wheel. Rivets accent the face as well, reinforcing the utilitarian character of the design. At 25.60 lbs, this is a solid alloy build suited to the demands of trailer service.\u003c\/p\u003e\u003cp\u003eGloss Black with Milled Spoke Faces\u003c\/p\u003e\u003cp\u003eThe finish is gloss black across the wheel body, with the spoke faces milled to a brighter, contrasting tone. The milling cuts through the black to expose the raw aluminum beneath, creating a two-tone effect that gives the Canyon Trailer more visual definition than a single-color finish. The contrast between the gloss black surfaces and the milled spoke faces holds up well in trailer environments where the wheel sees road grime, weather, and repeated loading cycles. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eHD builds the Canyon Trailer as a one-piece alloy wheel, a construction that suits the consistent, repetitive load cycles of trailer use. One-piece alloy carries the spoke geometry and hub structure in a single continuous form, keeping the wheel's shape stable under sustained load without the complexity of multi-piece assembly. The mold supports the split mesh design geometry cleanly, and the single-piece structure means there are no seams or fasteners between sections to monitor over time. The Canyon Trailer is also offered in additional sizes and finish options across the HD lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e8x165.1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e3.5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e128.6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eMilled Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e25.6 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"HD","offers":[{"title":"Default Title","offer_id":68713091694873,"sku":"CY1660820ML3","price":214.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/canyontrailer_milledblack_white__44400.jpg?v=1794772745"},{"product_id":"16x6-white-machined-wheel-canyon-trailer-8x6-5-0-cy1660820wm","title":"Canyon Trailer White Machined | 16x6 | 8x6.5 0mm Offset | CY1660820WM","description":"\u003cp\u003eBuilt for the 8x165.1 (8x6.5) Trailer Platform\u003c\/p\u003e\u003cp\u003eThe HD Canyon Trailer is a 16x6 alloy wheel sized and drilled specifically for heavy-duty trailer applications running the 8x165.1 (8x6.5) bolt pattern. This pattern is the standard for older Chevy\/GMC 2500 HD and 3500 platforms, older Dodge Ram 2500\/3500 (pre-2003), and Ford F-250\/F-350 (pre-1998) trailer setups. The 128.60mm hub bore fits these platforms, and the 0mm offset places the mounting surface exactly at the wheel's centerline, splitting the 6-inch barrel evenly at 3.5 inches of backspacing front and rear. That centered geometry is the standard for trailer applications, keeping lateral load balanced across the hub.\u003c\/p\u003e\u003cp\u003eSplit Ten-Spoke Mesh Design\u003c\/p\u003e\u003cp\u003eThe Canyon Trailer runs a split ten-spoke mesh layout across the face, giving the wheel an open, structured look that suits utility trailer builds without sacrificing visual presence. The exposed lug hardware sits in a circle around the hub bore at the center of the face, visible and accessible once the center cap is removed. Rivets accent the face, adding a finished detail to the design. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eGloss White with Machined Spoke Faces\u003c\/p\u003e\u003cp\u003eThe finish is gloss white across the wheel body, with the spoke faces machined to a brighter, contrasting tone. That contrast between the white surfaces and the machined spoke faces gives the Canyon Trailer a clean, two-tone look that holds up well on working trailer setups. At 25.60 lbs, this one-piece alloy construction keeps the wheel manageable for installation while delivering the structural integrity trailer duty demands.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eHD builds the Canyon Trailer as a one-piece alloy wheel, and that construction suits what this wheel is asked to do. One-piece alloy supports the complex mesh spoke geometry in a single continuous form, keeping the face's open structure intact through repeated load cycles. Cast alloy molds accommodate the split-spoke detail and the machined spoke faces in a single pour, and the result is a wheel that holds its shape and finish across the long haul of trailer service.\u003c\/p\u003e\u003cp\u003eFitment Details\u003c\/p\u003e\u003cp\u003eThe 8x165.1 (8x6.5) bolt pattern and 0mm offset make the Canyon Trailer a purpose-built trailer wheel. The centered offset and 3.5 inches of backspacing are matched to trailer hub geometry, where balanced lateral positioning matters for towing stability. The 128.60mm hub bore fits the platforms this pattern serves. The Canyon Trailer is also offered in additional sizes and finish options across the HD lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e8x165.1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e3.5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e128.6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eWhite Machined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e25.6 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"HD","offers":[{"title":"Default Title","offer_id":68713092120857,"sku":"CY1660820WM","price":194.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/canyontrailer_whitemachined_white__74041.jpg?v=1794772746"}],"url":"https:\/\/offroadsource.com\/collections\/hd.oembed","provider":"Offroad Source","version":"1.0","type":"link"}