{"title":"Hostile","description":null,"products":[{"product_id":"20x12-chrome-wheel-blaze-h111-8x6-5-44-h111-2012816547c","title":"Blaze H111 Chrome | 20x12 | 8x6.5 -44mm Offset | H111-2012816547C","description":"\u003cp\u003eBold Chrome on a Wide 20x12 Barrel\u003c\/p\u003e\u003cp\u003eThe Hostile Blaze H111 arrives in a 20x12 footprint with a -44mm offset and a full chrome finish. That offset places the mounting surface well rearward of the wheel's centerline, pushing the face outboard for a stance that commands attention from any angle. At 12 inches wide with a -44mm offset, this is an aggressive combination built for builds that want maximum visual presence. The chrome finish covers the entire wheel in a mirror-bright plated surface that reflects the surrounding environment and holds its character under direct light or overcast skies alike.\u003c\/p\u003e\u003cp\u003eSplit Ten-Spoke Mesh Design\u003c\/p\u003e\u003cp\u003eThe Blaze carries a split ten-spoke mesh design across its face. The spokes divide and weave in a tight mesh pattern from the hub outward, giving the wheel a layered, intricate look that suits the bold character Hostile is known for. Exposed lug hardware sits in a ring around the hub bore, visible on the face and adding a raw, hardware-forward detail to the overall presentation. The chrome finish amplifies the mesh geometry, with every spoke intersection and surface plane reflecting light in its own direction. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eConstruction and Load Capacity\u003c\/p\u003e\u003cp\u003eThe Blaze is a one-piece alloy wheel with a 3,500-lb load rating, making it a capable fit for heavy-duty truck applications. Backspacing measures 4.77 inches. At 48.1 lbs, this wheel is on the heavier end for a 20-inch alloy, which is consistent with the wide 12-inch barrel and the chrome plating process. The 125.2mm hub bore fits 8x165.1 (8x6.5) platforms.\u003c\/p\u003e\u003cp\u003eFitment for 8x165.1 Heavy-Duty Platforms\u003c\/p\u003e\u003cp\u003eThe 8x165.1 (8x6.5) bolt pattern covers a broad range of heavy-duty truck applications. Verified fitment includes the Ram 2500 from 1994 through current 2027 production (spanning both the Dodge Ram 2500 from 1994 to 2010 and the Ram 2500 from 2011 onward), the Chevrolet Silverado 2500 HD from 2001 to 2010, the GMC Sierra 2500 HD from 2001 to 2010, and the Dodge Ram 1500 from 2006 to 2008, among 10 additional verified platforms across the 8x165.1 fitment universe. The Blaze is also offered in additional sizes and finishes across the Hostile lineup for builds with different fitment requirements.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e8x165.1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-44 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.77\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e125.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eChrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e3500 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e48.1 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Hostile","offers":[{"title":"Default Title","offer_id":68713044377881,"sku":"H111-2012816547C","price":709.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/blaze_chrome_8lug_white__12309.jpg?v=1794772611"},{"product_id":"22x14-gloss-black-wheel-hf127-titan-6x5-5-76-hf127-2214655045gb","title":"HF127 Titan Gloss Black | 22x14 | 6x5.5 -76mm Offset | HF127-2214655045GB","description":"\u003cp\u003eBuilt for the 6x139.7 Platform\u003c\/p\u003e\u003cp\u003eThe Hostile Forged HF127 Titan is a 22x14-inch forged wheel drilled for the 6x139.7 (6x5.5) bolt pattern, covering a wide range of full-size and mid-size truck platforms. Verified fitment includes the Chevrolet Silverado 1500 (1999-2026), GMC Sierra 1500 (2000-2026), Toyota Tacoma (1995-2026), Toyota Tundra (2000-2026), and Chevrolet K1500 (1988-1999), with 10 additional verified platforms across 114 total fitments. The 106.10mm hub bore fits these 6x139.7 applications, and the 2,600-lb load rating supports the demands of full-size truck use.\u003c\/p\u003e\u003cp\u003eForged Construction, Hostile DNA\u003c\/p\u003e\u003cp\u003eHostile Forged brings the brand's aggressive design language into custom forged aluminum, and the Titan is the result. Solid aluminum billet pressed under extreme force refines the grain structure throughout the wheel, producing a denser, stronger piece than standard casting. At 45 lbs for a 22x14-inch forged wheel, the Titan comes in below the typical range for this construction class, a meaningful advantage at this scale. One-piece forged construction means the hub, spokes, and barrel are formed as a continuous unit with no seams or assembly points.\u003c\/p\u003e\u003cp\u003eMulti-Spoke Design with Exposed Lug Hardware\u003c\/p\u003e\u003cp\u003eThe Titan's face runs a multi-spoke layout in a gloss black finish with a visible outer lip. Lug hardware sits exposed in a circle around the hub bore at the center of the face, adding a raw, hardware-forward look that suits the wheel's aggressive proportions. The gloss black finish holds a deep, reflective tone across the face and barrel. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eA -76mm Offset Built for Aggressive Truck Fitment\u003c\/p\u003e\u003cp\u003eAt -76mm, the Titan's mounting surface sits well rearward of the wheel's centerline, pushing the face and barrel outward for a pronounced outboard stance. On a 14-inch-wide wheel at this diameter, that offset produces significant poke and a wide track that commands attention on lifted truck builds. This is among the more aggressive offset values available at this size, and it is purpose-built for trucks running lift kits where fender clearance opens up to accommodate the outboard wheel position. Backspacing measures 4.51 inches. The Titan is also offered in additional sizes, widths, finishes, and bolt patterns across the Hostile Forged lineup for builds with different fitment targets.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-76 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.51\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eGloss Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eForged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e45 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Hostile","offers":[{"title":"Default Title","offer_id":68713044312345,"sku":"HF127-2214655045GB","price":948.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/hf127_glossblack_6lug_white__99618.jpg?v=1794772610"},{"product_id":"17x9-silver-machined-wheel-rapture-h601-6x5-5-18-h601-1790655057m","title":"Rapture H601 Silver Machined | 17x9 | 6x5.5 +18mm Offset | H601-1790655057M","description":"\u003cp\u003eBuilt for the 6x139.7 Platform\u003c\/p\u003e\u003cp\u003eThe Hostile Rapture H601 lands on one of the most widely shared 6-lug truck patterns in the aftermarket: 6x139.7 (6x5.5). Verified fitment covers the Chevrolet Silverado 1500 (1999-2026), GMC Sierra 1500 (2000-2026), Toyota Tacoma (1995-2026), Toyota Tundra (2000-2026), and Chevrolet K1500 (1988-1999), with 10 additional verified platforms across 114 total fitments. The 106.1mm hub bore fits these platforms, and the 2,600-lb load rating supports the demands of full-size and mid-size truck use.\u003c\/p\u003e\u003cp\u003eSplit Eight-Spoke Design with Exposed Hardware\u003c\/p\u003e\u003cp\u003eThe Rapture's face runs a split eight-spoke layout, where each spoke divides as it extends outward from the hub, giving the design an open, layered look that suits Hostile's bold aesthetic. Lug hardware sits exposed around the hub bore, visible on the face and adding an intentional industrial character to the overall look. A center cap is included with this wheel. The gloss silver finish across the face is contrasted by machined spoke faces, where the aluminum is cut to a brighter, reflective surface, creating a two-tone effect that adds depth without relying on a complex paint scheme.\u003c\/p\u003e\u003cp\u003eOne-Piece Cast Alloy Construction\u003c\/p\u003e\u003cp\u003eThe Rapture is cast in one piece from alloy aluminum. Cast construction supports the Rapture's split-spoke geometry and contoured face detail in a single continuous shape, keeping the design's visual complexity intact through every load cycle. At 26.2 lbs, this wheel carries the proven long-haul value that has made cast alloy the most-used construction method in the aftermarket. The one-piece build keeps the wheel structurally unified from hub to barrel.\u003c\/p\u003e\u003cp\u003eOffset and Fitment Details\u003c\/p\u003e\u003cp\u003eAt 17x9 with a +18mm offset, the mounting surface sits forward of the wheel's centerline, positioning the wheel closer to the vehicle's face side. This keeps the wheel tucked within the fender arch on stock and leveled trucks, a practical fit for daily-driven builds that want Hostile's aggressive styling without pushing the wheel outward. Backspacing measures 5.71 inches. The Rapture is also offered in additional sizes, widths, and finishes across the lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e18 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5.71\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSilver Machined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e29.7 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Hostile","offers":[{"title":"Default Title","offer_id":68713044410649,"sku":"H601-1790655057M","price":332.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/rapture_silvermachined_white__93909.jpg?v=1794772611"},{"product_id":"17x9-bronze-black-wheel-h129-mojave-5x5-0-h129-1790512750z","title":"H129 Mojave Bronze Black | 17x9 | 5x5 0mm Offset | H129-1790512750Z","description":"\u003cp\u003eBuilt for the 5x127 Platform\u003c\/p\u003e\u003cp\u003eJeep Wrangler owners (2007-2026) and Jeep Grand Cherokee drivers (1999-2026) are the natural home for the Hostile Mojave. The 5x127 (5x5) bolt pattern also fits Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), with 10 additional verified platforms in the fitment universe. The 78.10mm hub bore fits these 5x127 applications, and the 2,600-lb load rating supports the demands of truck and SUV builds running this platform.\u003c\/p\u003e\u003cp\u003eSimulated Beadlock Design with Exposed Hardware\u003c\/p\u003e\u003cp\u003eThe Mojave's defining visual is its black simulated beadlock ring, which wraps the outer face and gives the wheel the rugged, trail-ready character Hostile is known for. Rivets run the ring, adding hardware detail that reinforces the aggressive intent of the design. The lug hardware is exposed and visible on the face, sitting in a circle around the hub bore where the wheel mounts to the vehicle. The concave face adds depth to the profile, pulling the center inward and giving the multi-split-spoke layout a layered, dimensional look. Bronze carries the face and spoke surfaces, contrasting sharply against the black beadlock ring for a two-tone finish that suits builds going for a bold, intentional look.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eHostile builds the Mojave as a one-piece alloy wheel, a construction that supports the complex face geometry this design demands. The simulated beadlock ring, concave face, and multi-spoke layout are all formed in a single continuous casting, keeping the design's structural depth intact across the full load cycle. At 34 lbs, the Mojave carries the weight you'd expect from a one-piece alloy wheel at this size and complexity. A center cap is included.\u003c\/p\u003e\u003cp\u003eFitment at 17x9 with 0mm Offset\u003c\/p\u003e\u003cp\u003eAt 17 inches in diameter and 9 inches wide with a 0mm offset, the mounting surface sits exactly at the wheel's centerline. This neutral offset positions the wheel evenly within the fender arch, making it a versatile fit across stock, leveled, and lifted Jeep and truck builds without pushing aggressively inboard or outboard. Backspacing measures 5 inches. The Mojave is also offered in additional sizes, widths, finishes, and bolt patterns across the Hostile lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e78.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBronze Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e26 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Hostile","offers":[{"title":"Default Title","offer_id":68713044443417,"sku":"H129-1790512750Z","price":416.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/h129_bronzeblack_5lug_white__40219.jpg?v=1794772611"},{"product_id":"22x14-polished-wheel-hf127-titan-6x5-5-76-hf127-2214655045p","title":"HF127 Titan Polished | 22x14 | 6x5.5 -76mm Offset | HF127-2214655045P","description":"\u003cp\u003eBuilt for the 6x139.7 Platform\u003c\/p\u003e\u003cp\u003eThe Hostile Forged HF127 Titan is a 22x14 forged wheel drilled for the 6x139.7 (6x5.5) bolt pattern, covering one of the most popular 6-lug truck platforms in the aftermarket. Verified fitment includes the Chevrolet Silverado 1500 (1999-2026), GMC Sierra 1500 (2000-2026), Toyota Tacoma (1995-2026), Toyota Tundra (2000-2026), and Chevrolet K1500 (1988-1999), with 10 additional verified platforms across 114 total fitments. The 106.10mm hub bore fits these 6x139.7 applications, and the 2,600-lb load rating supports the demands of full-size truck use.\u003c\/p\u003e\u003cp\u003eForged Construction, Competitive Weight\u003c\/p\u003e\u003cp\u003eHostile Forged brings the same aggressive design DNA as the Hostile lineup but steps up to custom forged aluminum construction. A solid aluminum billet pressed under extreme force refines the grain structure throughout the wheel, producing a dense, strong one-piece forging that carries the Titan's proportions with confidence. At 45 lbs, this wheel comes in below the typical range for forged wheels of this scale, a meaningful advantage when you're running a 22x14 setup across all four corners. The one-piece forged construction keeps the design structurally continuous from hub to barrel with no seams or assembly points.\u003c\/p\u003e\u003cp\u003ePolished Finish, Multi-Spoke Design\u003c\/p\u003e\u003cp\u003eThe Titan's polished finish is a full-mirror aluminum surface that reflects the wheel's geometry cleanly across the entire face. The multi-spoke layout opens up the disc with visual depth, and the exposed lug hardware sits in a circle around the hub bore, visible on the face and adding an intentional hardware-forward detail to the design. A center cap is included. The outer lip adds further visual presence to the profile, complementing the wide 14-inch barrel at this diameter.\u003c\/p\u003e\u003cp\u003eAggressive Offset for Lifted Truck Builds\u003c\/p\u003e\u003cp\u003eAt -76mm, the Titan's mounting surface sits well rearward of the wheel's centerline, pushing the face and barrel significantly outboard. On a 14-inch-wide wheel at 22 inches in diameter, that offset produces a pronounced outboard stance that suits lifted truck builds where fender clearance opens up the room this combination demands. Backspacing measures 4.51 inches. This is an aggressive fitment combination built for trucks running substantial lift, where the geometry works with the added clearance rather than against it. The Titan is also offered in additional sizes, widths, and finishes across the Hostile Forged lineup for builds with different fitment targets.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-76 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.51\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePolished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eForged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e45 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Hostile","offers":[{"title":"Default Title","offer_id":68713044672793,"sku":"HF127-2214655045P","price":1076.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/hf127_polished_6lug_white__32611.jpg?v=1794772612"},{"product_id":"17x9-machined-wheel-crawler-h138-5x5-12-h138-1790512745m","title":"Crawler H138 Machined | 17x9 | 5x5 -12mm Offset | H138-1790512745M","description":"\u003cp\u003eBuilt for the 5x127 Platform\u003c\/p\u003e\u003cp\u003eJeep Wrangler owners (2007-2026) and Jeep Grand Cherokee drivers (1999-2026) are the natural home for the Hostile Crawler H138. The 5x127 (5x5) bolt pattern also fits Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), with 10 additional verified platforms rounding out the fitment universe. The 78.10mm hub bore fits these applications, and the 2,600-lb load rating supports the demands of trail-ready and daily-driven builds alike.\u003c\/p\u003e\u003cp\u003eTen-Spoke Concave Design With Exposed Hardware\u003c\/p\u003e\u003cp\u003eThe Crawler's face runs ten spokes in a concave profile, pulling the center of the wheel back and giving the design visual depth from any angle. Lug hardware sits exposed around the hub bore, visible on the face where the wheel mounts to the vehicle. That hardware-forward look is a deliberate part of the Crawler's character: nothing is hidden, nothing is softened. The machined finish brings a bright, metallic contrast across the spoke faces and concave center, letting the aluminum's natural surface show through where the machining has cut. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eThe Crawler is cast in one-piece alloy, a construction that supports the deep concave profile and the complex spoke geometry without seams or assembly points. Cast alloy molds hold the spoke taper, the concave depth, and the outer lip in a single continuous shape, keeping the design's structural integrity intact through load cycles on and off pavement. At 26 lbs, the Crawler carries its size without excess weight. The one-piece build also means there are no multi-piece joints to maintain over time.\u003c\/p\u003e\u003cp\u003eOffset and Fitment Details\u003c\/p\u003e\u003cp\u003eAt 17x9 with a -12mm offset, the Crawler's mounting surface sits rearward of the wheel's centerline, pushing the wheel outward relative to the hub. That outboard positioning adds presence to the stance without going to the extreme negative offsets Hostile is known for in wider sizes. Backspacing measures 4.53 inches. The 17-inch diameter suits Jeep Wrangler builds running larger all-terrain or mud-terrain tires, where keeping diameter down preserves sidewall height and off-road compliance. The Crawler is also offered in additional sizes, widths, and finishes across the lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.53\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e78.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eMachined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e26 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Hostile","offers":[{"title":"Default Title","offer_id":68713044803865,"sku":"H138-1790512745M","price":332.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/crawler_machined_56lug_white__04546.jpg?v=1794772612"},{"product_id":"18x9-silver-machined-wheel-rapture-h601-6x5-5-0-h601-1890655050m","title":"Rapture H601 Silver Machined | 18x9 | 6x5.5 0mm Offset | H601-1890655050M","description":"\u003cp\u003eBuilt for the 6x139.7 Platform\u003c\/p\u003e\u003cp\u003eThe Hostile Rapture H601 lands on one of the most widely used 6-lug truck patterns in the aftermarket: 6x139.7 (6x5.5). Verified fitment spans 114 platforms, with primary fits including the Chevrolet Silverado 1500 (1999-2026), GMC Sierra 1500 (2000-2026), Toyota Tacoma (1995-2026), Toyota Tundra (2000-2026), and Chevrolet K1500 (1988-1999), plus 10 additional verified platforms. The 106.10mm hub bore fits these applications, and the 2,600-lb load rating supports the demands of full-size and mid-size truck use.\u003c\/p\u003e\u003cp\u003eSplit Eight-Spoke Design with Exposed Hardware\u003c\/p\u003e\u003cp\u003eThe Rapture's face runs a split eight-spoke layout with a gloss silver finish across the spoke surfaces and machined spoke faces that bring a brighter, contrasting tone to the design. The result is a two-tone look that gives the wheel visual depth without relying on heavy graphics or color. Lug hardware sits exposed around the hub bore, visible on the face where the wheel mounts to the vehicle, adding an intentional industrial detail that fits Hostile's aggressive design language. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eThe Rapture is cast in one-piece alloy, a construction that supports the complex split-spoke geometry and contoured lip in a single continuous shape. Cast alloy has earned its place as the most-used construction in aftermarket wheel manufacturing for good reason: it delivers proven structural integrity and long-haul value across a wide range of truck applications. At 29.1 lbs, the Rapture carries its size without excess.\u003c\/p\u003e\u003cp\u003eOffset and Fitment Details\u003c\/p\u003e\u003cp\u003eAt 18x9 with a 0mm offset, the Rapture's mounting surface sits exactly at the wheel's centerline, placing the barrel evenly split between inboard and outboard. The 5-inch backspacing reflects that centered position. This offset works across stock, leveled, and lifted truck setups on the 6x139.7 pattern, giving the wheel broad compatibility without pushing into aggressive outboard territory. The Rapture is also offered in additional sizes, widths, and finishes across the lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSilver Machined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e33.6 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Hostile","offers":[{"title":"Default Title","offer_id":68713044869401,"sku":"H601-1890655050M","price":358.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/rapture_silvermachined_white__83043.jpg?v=1794772612"},{"product_id":"17x9-satin-black-wheel-h129-5x5-0-h129-1790512750a","title":"H129 Mojave Satin Black | 17x9 | 5x5 0mm Offset | H129-1790512750A","description":"\u003cp\u003eBuilt for the 5x127 Platform\u003c\/p\u003e\u003cp\u003eJeep Wrangler owners (2007-2026) and Jeep Grand Cherokee drivers (1999-2026) are the natural home for the Hostile Mojave, a 17x9 cast alloy wheel drilled for the 5x127 (5x5) bolt pattern. The 78.10mm hub bore fits these Jeep platforms along with Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), GMC Yukon (1992-1999), and 10 additional verified applications across 32 total fitments. At 0mm offset with 5 inches of backspacing, the mounting surface sits exactly at the wheel's centerline, placing the barrel evenly split between inboard and outboard for a balanced, planted stance.\u003c\/p\u003e\u003cp\u003eSplit Ten-Spoke Design with Simulated Beadlock\u003c\/p\u003e\u003cp\u003eThe Mojave runs a split ten-spoke layout with a concave face that draws the eye inward toward the hub. Rivets ring the outer edge of the face in a simulated beadlock ring, giving the wheel the rugged, trail-ready character Hostile is known for without the weight penalty of a functional locking ring. The exposed lug hardware sits in a circle around the hub bore at the center of the face, visible and intentional as part of the overall design. Satin black ties the whole face together: a flat, low-sheen finish that holds its look through mud, dust, and road film without demanding constant upkeep. A center cap (HC-5010SB) is included.\u003c\/p\u003e\u003cp\u003eOne-Piece Cast Alloy Construction\u003c\/p\u003e\u003cp\u003eThe Mojave is cast in one piece from alloy aluminum, a construction that supports the deep concave profile and the complex spoke geometry without compromise. Cast molds handle the undercuts and contoured surfaces that define this wheel's aggressive face, keeping the design intact through every load cycle. At 29.32 lbs, the Mojave sits right in line with typical weight for a 17-inch alloy truck wheel, and the 2,600-lb load rating supports the demands of Jeep-platform builds running larger tires and trail hardware.\u003c\/p\u003e\u003cp\u003eFitment Details\u003c\/p\u003e\u003cp\u003eThe Wrangler JK and JL are the most common builds running this wheel, where the 5x127 pattern, 0mm offset, and 17-inch diameter work well with a lift kit and aggressive all-terrain or mud-terrain tires. The Grand Cherokee and older GM half-ton platforms share the same bolt pattern, broadening the Mojave's reach across a range of truck and SUV builds. The Mojave is also offered in additional sizes and bolt-pattern options for builders whose setup calls for a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e78.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSatin Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e34.83 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Hostile","offers":[{"title":"Default Title","offer_id":68713044934937,"sku":"H129-1790512750A","price":416.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/h129_satinblack_5lug_white__66226.jpg?v=1794772613"},{"product_id":"24x12-gloss-black-wheel-hf127-titan-6x5-5-44-hf127-2412655047gb","title":"HF127 Titan Gloss Black | 24x12 | 6x5.5 -44mm Offset | HF127-2412655047GB","description":"\u003cp\u003eBuilt for the 6x139.7 Platform\u003c\/p\u003e\u003cp\u003eThe Hostile Forged HF127 Titan is a 24x12 forged wheel drilled for the 6x139.7 (6x5.5) bolt pattern, covering a wide range of full-size truck and mid-size truck platforms. Verified fitment includes the Chevrolet Silverado 1500 (1999-2026), GMC Sierra 1500 (2000-2026), Toyota Tundra (2000-2026), Toyota Tacoma (1995-2026), and Chevrolet K1500 (1988-1999), with 10 additional verified platforms across 114 total fitments. The 106.10mm hub bore fits these 6x139.7 applications, and the 2,600-lb load rating supports full-size truck demands.\u003c\/p\u003e\u003cp\u003eForged Construction, Hostile DNA\u003c\/p\u003e\u003cp\u003eHostile Forged brings the brand's aggressive design language into custom forged aluminum, and the Titan is a clear expression of that. Forging starts with solid aluminum billet pressed under extreme force, refining the grain structure for density and strength throughout the wheel. At 24 inches and 12 inches wide, the Titan carries that forged integrity across a large-format build where structural consistency matters. The result is a wheel that weighs in at 51 lbs, a reasonable figure for a forged 24x12, and delivers the craftsmanship that Hostile Forged is built around.\u003c\/p\u003e\u003cp\u003eMulti-Spoke Design With Exposed Lug Hardware\u003c\/p\u003e\u003cp\u003eThe Titan runs a multi-spoke design in a gloss black finish with a visible outer lip. Lug hardware sits exposed in a circle around the hub bore at the center of the face, adding a raw, hardware-forward look that suits the wheel's aggressive proportions. The gloss black finish holds its depth across the full face and lip, giving the wheel a clean, high-contrast presence on any build. A center cap is included, covering the hub area when you want a cleaner look.\u003c\/p\u003e\u003cp\u003eOffset and Stance at -44mm\u003c\/p\u003e\u003cp\u003eAt -44mm offset, the Titan's mounting surface sits well rearward of the wheel's centerline, pushing the face and barrel outward for a wide, aggressive stance. On a 12-inch-wide wheel at this offset, the outboard positioning is pronounced, and this combination is built for lifted truck setups where fender clearance supports the extra poke. Backspacing measures 4.77 inches. This is a wheel sized and offset for builds that want maximum presence on the 6x139.7 platform.\u003c\/p\u003e\u003cp\u003eAdditional Configurations Available\u003c\/p\u003e\u003cp\u003eThe Hostile Forged Titan is offered across additional sizes, widths, and finishes beyond this 24x12 gloss black setup, so if this combination does not match your build, other options in the lineup may.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-44 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.77\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eGloss Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eForged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e51 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Hostile","offers":[{"title":"Default Title","offer_id":68713045033241,"sku":"HF127-2412655047GB","price":1000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/hf127_glossblack_6lug_white__07614.jpg?v=1794772613"},{"product_id":"17x9-satin-black-wheel-crawler-h138-5x5-12-h138-1790512745a","title":"Crawler H138 Satin Black | 17x9 | 5x5 -12mm Offset | H138-1790512745A","description":"\u003cp\u003eBuilt for Jeep and Truck Platforms\u003c\/p\u003e\u003cp\u003eJeep Wrangler owners (2007-2026) get a wheel sized and offset for serious off-road builds, and the Hostile Crawler H138 covers a wide range of 5x127 (5x5) platforms beyond that: Jeep Grand Cherokee (1999-2026), Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), GMC Yukon (1992-1999), and 10 additional verified applications across 32 total fitments. The 78.10mm hub bore fits these platforms, and the 2,600-lb load rating supports the demands of trail-ready and daily-driven builds alike.\u003c\/p\u003e\u003cp\u003eTen-Spoke Concave Design\u003c\/p\u003e\u003cp\u003eThe Crawler's face runs ten spokes in a concave profile, pulling the center of the wheel rearward so the outer lip frames a visually deep, aggressive face. Exposed lug hardware sits in a circle around the hub bore, adding a raw, hardware-forward look that fits Hostile's no-apologies design language. The satin black finish, listed as Satin Black (Asphalt), keeps the surface low-glare and resistant to the kind of road film and trail grime that shows up on glossier finishes. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eThe Crawler is cast as a single piece in alloy, a construction that supports the complex concave spoke geometry and deep outer lip in one continuous shape. Cast alloy carries the structural integrity for repeated load cycles across varied terrain, and the one-piece build keeps the wheel's proportions consistent from hub to barrel without the tolerance variation that comes with multi-piece assembly. At 28.9 lbs, the weight is well within the expected range for a 17-inch alloy wheel of this size and depth.\u003c\/p\u003e\u003cp\u003eOffset and Stance at -12mm\u003c\/p\u003e\u003cp\u003eAt -12mm, the mounting surface sits rearward of the wheel's centerline, pushing the wheel outward relative to the hub. On a 9-inch-wide wheel, this offset positions the face with a modest outboard lean that suits lifted Jeep and truck builds without going to an extreme. Backspacing measures 4.53 inches. The Crawler is also offered in additional sizes, widths, and finishes across the Hostile lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.53\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e78.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSatin Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e32.4 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Hostile","offers":[{"title":"Default Title","offer_id":68713045164313,"sku":"H138-1790512745A","price":332.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/crawler_satinblack_56lug_white__79320.jpg?v=1794772614"},{"product_id":"18x9-gloss-black-wheel-rapture-h601-6x5-5-18-h601-1890655057ga","title":"Rapture H601 Gloss Black | 18x9 | 6x5.5 +18mm Offset | H601-1890655057GA","description":"\u003cp\u003eBuilt for the 6x139.7 Platform\u003c\/p\u003e\u003cp\u003eThe Hostile Rapture H601 lands on one of the most widely used 6-lug truck patterns in the segment: 6x139.7 (6x5.5). Chevrolet Silverado 1500 owners from 1999 through 2026, GMC Sierra 1500 owners from 2000 through 2026, Toyota Tacoma from 1995 through 2026, Toyota Tundra from 2000 through 2026, and the Chevrolet K1500 from 1988 through 1999 all fall within the verified fitment range. The 106.1mm hub bore fits these platforms, and the 2,600-lb load rating supports the demands of full-size and mid-size truck use. Beyond those five platforms, the Rapture H601 spans 10 additional verified applications across the 6x139.7 universe.\u003c\/p\u003e\u003cp\u003eSplit Eight-Spoke Design with Exposed Hardware\u003c\/p\u003e\u003cp\u003eThe Rapture carries a split eight-spoke layout that opens up the face with visual depth and a purposeful, aggressive geometry. Each pair of spokes branches outward from the hub area, creating a layered look that suits the bold character Hostile is known for. Lug hardware sits exposed around the hub bore, visible on the face where the wheel mounts to the vehicle. That exposed hardware is a deliberate design choice, adding a raw, mechanical presence to the overall look. The outer lip frames the profile and adds dimension to the 18-inch diameter. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Cast Alloy Construction\u003c\/p\u003e\u003cp\u003eThe Rapture H601 is cast in one piece from alloy, a construction method that supports the complex split-spoke geometry and deep face profile without compromise. Cast alloy molds accommodate the undercuts and contoured shapes that define this design, delivering reliable structural integrity across the full load cycle. At 29.1 lbs, the wheel carries the weight expected for this size and construction. The gloss black finish is clean and consistent across the face, spokes, and barrel, holding its look through road use and seasonal exposure.\u003c\/p\u003e\u003cp\u003eOffset and Stance Details\u003c\/p\u003e\u003cp\u003eAt +18mm offset on a 9-inch width, the mounting surface sits forward of the wheel's centerline, positioning the wheel closer to the vehicle's face side. This keeps the wheel tucked within the fender arch for a composed, controlled stance that works across stock, leveled, and lifted truck setups. The 5.71 inches of backspacing reflects that inboard positioning. This is a truck-scaled combination suited to builds that want Hostile's aggressive styling without pushing the wheel dramatically outboard.\u003c\/p\u003e\u003cp\u003eMore Configurations Available\u003c\/p\u003e\u003cp\u003eThe Rapture H601 is offered in additional sizes, widths, offsets, and finish options beyond this 18x9 gloss black setup, covering a range of 6-lug and 8-lug bolt patterns to fit a broader set of truck platforms.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e18 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5.71\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eGloss Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e33.6 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Hostile","offers":[{"title":"Default Title","offer_id":68713045197081,"sku":"H601-1890655057GA","price":358.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/rapture_glossblack_white__78941.jpg?v=1794772614"},{"product_id":"18x9-satin-black-wheel-h129-5x5-12-h129-1890512745a","title":"H129 Mojave Satin Black | 18x9 | 5x5 -12mm Offset | H129-1890512745A","description":"\u003cp\u003eBuilt for the 5x127 Platform\u003c\/p\u003e\u003cp\u003eJeep Wrangler owners (2007-2026) are the natural home for the Hostile Mojave, and the 5x127 (5x5) bolt pattern confirms it. The Jeep Grand Cherokee (1999-2026) fits as well, along with classic GM platforms including the Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), with 10 additional verified fits rounding out the platform list. The 78.10mm hub bore fits these applications, and the 2,600-lb load rating supports the demands of trail-ready and daily-driven builds alike.\u003c\/p\u003e\u003cp\u003eSplit Ten-Spoke Design with Simulated Beadlock\u003c\/p\u003e\u003cp\u003eThe Mojave runs a split ten-spoke layout with a concave face profile that gives the wheel visual depth from every angle. Rivets ring the outer edge of the face, framing the simulated beadlock ring that defines the Mojave's aggressive character. The lug hardware sits exposed around the hub bore at the center of the face, visible and intentional rather than hidden behind a cap. Satin black ties the whole face together: a flat, low-sheen finish that holds its look through mud, dust, and road film without demanding constant attention. A center cap is included.\u003c\/p\u003e\u003cp\u003eOne-Piece Cast Alloy Construction\u003c\/p\u003e\u003cp\u003eHostile builds the Mojave as a one-piece cast alloy wheel, and the construction suits the design well. Cast aluminum supports the Mojave's complex spoke geometry, concave profile, and simulated beadlock ring in a single continuous shape, keeping the design intact through every load cycle. At 29 lbs, this wheel comes in under the typical weight for an 18-inch alloy truck wheel in this class, a solid result for a one-piece build carrying this much face detail.\u003c\/p\u003e\u003cp\u003eOffset and Fitment Details\u003c\/p\u003e\u003cp\u003eAt 18x9 with a -12mm offset, the Mojave's mounting surface sits rearward of the wheel's centerline, pushing the face outward for a more aggressive stance than a neutral or positive offset delivers. Backspacing measures 4.53 inches. The Mojave is also offered in additional sizes, widths, and finishes across the Hostile lineup, covering both 6-lug and 8-lug bolt patterns for a wider range of truck platforms.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.53\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e78.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSatin Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e29 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Hostile","offers":[{"title":"Default Title","offer_id":68713045360921,"sku":"H129-1890512745A","price":456.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/h129_satinblack_5lug_white__35170.jpg?v=1794772614"},{"product_id":"24x12-polished-wheel-hf127-titan-6x5-5-44-hf127-2412655047p","title":"HF127 Titan Polished | 24x12 | 6x5.5 -44mm Offset | HF127-2412655047P","description":"\u003cp\u003eBuilt for the 6x139.7 Platform\u003c\/p\u003e\u003cp\u003eThe Hostile Forged HF127 Titan is a 24-inch forged wheel built for the 6x139.7 (6x5.5) bolt pattern, covering Chevrolet Silverado 1500 (1999-2026), GMC Sierra 1500 (2000-2026), Toyota Tacoma (1995-2026), Toyota Tundra (2000-2026), Chevrolet K1500 (1988-1999), and 10 additional verified platforms across 114 total fitments. The 106.10mm hub bore fits these 6-lug truck platforms. At 24 inches in diameter, this is a show-presence wheel that commands attention on any full-size or mid-size truck build.\u003c\/p\u003e\u003cp\u003eForged Aluminum, One-Piece Construction\u003c\/p\u003e\u003cp\u003eHostile Forged brings the brand's aggressive design DNA into custom forged aluminum, and the Titan is the result. A solid aluminum billet pressed under extreme force refines the grain structure throughout the wheel, producing a dense, strong one-piece construction that carries the Titan's deep multi-spoke profile without compromise. At 51 lbs, the weight reflects what forged aluminum delivers at this scale: structural integrity across the full 24-inch diameter and 12-inch width, built to handle the demands of a loaded full-size truck.\u003c\/p\u003e\u003cp\u003ePolished Finish and Multi-Spoke Design\u003c\/p\u003e\u003cp\u003eThe Titan's polished finish is a full-mirror shine across the face, spokes, and outer lip, giving the wheel a bright, reflective presence that suits show builds and clean street setups alike. The multi-spoke layout opens up the face with visual depth, and the exposed lug hardware sits in a circle around the hub bore, adding a purposeful, hardware-forward detail to the center of the wheel. A center cap is included. The outer lip adds further dimension to the profile, framing the face on the barrel.\u003c\/p\u003e\u003cp\u003eOffset and Fitment Details\u003c\/p\u003e\u003cp\u003eAt -44mm offset on a 12-inch-wide barrel, the mounting surface sits well rearward of centerline, pushing the wheel outward for an aggressive, wide stance. This combination qualifies as a genuinely outboard fitment: the wheel will poke beyond the fender line on most 6x139.7 trucks, so pairing it with a lift kit is the standard path to running this size cleanly. Backspacing measures 4.77 inches. The 2,600-lb load rating supports full-size truck payloads. The Titan is also offered in additional sizes, widths, finishes, and bolt patterns across the Hostile Forged lineup.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-44 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.77\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePolished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eForged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e51 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Hostile","offers":[{"title":"Default Title","offer_id":68713045459225,"sku":"HF127-2412655047P","price":1134.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/hf127_polished_6lug_white__79750.jpg?v=1794772614"},{"product_id":"18x9-silver-machined-wheel-rapture-h601-6x5-5-18-h601-1890655057m","title":"Rapture H601 Silver Machined | 18x9 | 6x5.5 +18mm Offset | H601-1890655057M","description":"\u003cp\u003eBuilt for the 6x139.7 Platform\u003c\/p\u003e\u003cp\u003eThe Hostile Rapture H601 lands on one of the most widely shared 6-lug truck patterns in the aftermarket: 6x139.7 (6x5.5). Verified fitment spans 114 platforms, with primary fits including the Chevrolet Silverado 1500 (1999-2026), GMC Sierra 1500 (2000-2026), Toyota Tacoma (1995-2026), Toyota Tundra (2000-2026), and Chevrolet K1500 (1988-1999), plus 10 additional verified platforms. The 106.10mm hub bore fits these applications, and the 2,600-lb load rating supports the payload demands of full-size and mid-size truck builds.\u003c\/p\u003e\u003cp\u003eSplit Eight-Spoke Design with Exposed Hardware\u003c\/p\u003e\u003cp\u003eThe Rapture's face runs a split eight-spoke layout with a gloss silver finish across the spoke surfaces and machined faces that bring out a brighter, contrasting tone on each spoke. The result is a two-tone look that gives the wheel visual depth without relying on heavy graphic work. Lug hardware sits exposed around the hub bore, visible on the face and adding an intentional, hardware-forward detail to the overall look. A center cap is included with this wheel. The outer lip adds profile to the 18-inch diameter, and the non-directional pattern means mounting orientation is flexible.\u003c\/p\u003e\u003cp\u003eOne-Piece Cast Alloy Construction\u003c\/p\u003e\u003cp\u003eHostile builds the Rapture as a one-piece cast alloy wheel, a construction that supports the deep spoke geometry and split-spoke profile without compromise. Cast alloy molds support complex face shapes, undercuts, and the contoured spoke geometry that defines the Rapture's look, delivering proven structural integrity across the full-size and mid-size truck applications this wheel was built for. At 29.1 lbs, the Rapture carries its size without excess.\u003c\/p\u003e\u003cp\u003eOffset and Fitment Details\u003c\/p\u003e\u003cp\u003eAt 18x9 with a +18mm offset, the mounting surface sits forward of the wheel's centerline, positioning the wheel closer to the vehicle's face side. The 5.71 inches of backspacing works within the wheel well geometry of the 6x139.7 platforms this wheel is verified for. This offset keeps the wheel seated within the fender arch on stock and leveled trucks, making the Rapture a clean fit across a wide range of build states. The Rapture is also offered in additional sizes, widths, finishes, and bolt patterns across the lineup for builds with different fitment targets.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e18 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5.71\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSilver Machined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e33.6 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Hostile","offers":[{"title":"Default Title","offer_id":68713045524761,"sku":"H601-1890655057M","price":358.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/rapture_silvermachined_white__42036.jpg?v=1794772615"},{"product_id":"17x9-bronze-black-wheel-crawler-h138-5x5-0-h138-1790512750z","title":"Crawler H138 Bronze Black | 17x9 | 5x5 0mm Offset | H138-1790512750Z","description":"\u003cp\u003eBuilt for Jeep and Truck Platforms\u003c\/p\u003e\u003cp\u003eJeep Wrangler owners (2007-2026) get a wheel sized and offset for the platform's wide stance and suspension travel. The Hostile Crawler H138 also fits the Jeep Grand Cherokee (1999-2026), Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), covering the 5x127 (5x5) bolt pattern across 32 verified fitment applications. The 78.10mm hub bore fits these platforms, and the 2,600-lb load rating supports the demands of trail-ready and daily-driven builds alike.\u003c\/p\u003e\u003cp\u003eTen-Spoke Concave Design\u003c\/p\u003e\u003cp\u003eThe Crawler runs ten spokes arranged in a concave profile, pulling the face inward for visual depth that suits the aggressive character Hostile is known for. The black lip frames the outer edge of the wheel, creating a two-tone contrast against the bronze face. Lug hardware sits exposed around the hub bore, visible on the face and adding a purposeful, hardware-forward look to the overall design. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eBronze with a Black Lip Finish\u003c\/p\u003e\u003cp\u003eThe bronze finish covers the face and spokes, while the black lip provides a sharp tonal break at the outer edge. The combination gives the Crawler a distinct, layered appearance that suits both trail builds and street-driven Jeep setups. The finish holds its character across the kind of environments these platforms are built for.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eThe Crawler is built as a one-piece alloy wheel, a construction that supports the complex concave spoke geometry and deep profile this design demands. Cast alloy molds support contoured shapes and undercuts that give the Crawler its dimensional face without compromising structural integrity. At 28.9 lbs and a 5-inch backspacing, the wheel sits with the mounting surface at the centerline, a neutral 0mm offset that positions the wheel evenly within the fender arch.\u003c\/p\u003e\u003cp\u003eFitment Details\u003c\/p\u003e\u003cp\u003eAt 17x9 with a 0mm offset, the mounting surface sits exactly at the wheel's centerline, placing the barrel evenly between the inner and outer edges. This neutral offset works across stock, leveled, and lifted Wrangler and Grand Cherokee builds without pushing aggressively outboard or tucking inward. The Crawler is also offered in additional sizes, widths, finishes, and bolt patterns across the Hostile lineup for builds with different fitment needs.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e78.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBronze Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e32.4 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Hostile","offers":[{"title":"Default Title","offer_id":68713045590297,"sku":"H138-1790512750Z","price":332.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/crawler_bronzeblack_56lug_white__71348.jpg?v=1794772615"},{"product_id":"18x9-satin-black-wheel-h129-5x5-0-h129-1890512750a","title":"H129 Mojave Satin Black | 18x9 | 5x5 0mm Offset | H129-1890512750A","description":"\u003cp\u003eBuilt for the 5x127 Platform\u003c\/p\u003e\u003cp\u003eJeep Wrangler owners (2007-2026) will find the Hostile Mojave sized and offset for their platform right out of the box. The 5x127 (5x5) bolt pattern also fits the Jeep Grand Cherokee (1999-2026), Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), with 10 additional verified platforms in the fitment universe. The 78.10mm hub bore fits these 5x127 applications, and the 2,600-lb load rating supports the demands of truck and SUV use.\u003c\/p\u003e\u003cp\u003eSplit Ten-Spoke Design with Simulated Beadlock\u003c\/p\u003e\u003cp\u003eThe Mojave runs a split ten-spoke face with a concave profile that draws the eye inward toward the hub. Rivets ring the outer edge of the face, giving the wheel the visual character of a beadlock ring without the added weight of a functional locking assembly. The simulated beadlock treatment is a signature Hostile detail: bold, unmissable, and built to stand out on Jeep and truck platforms that refuse to blend in. Exposed lug hardware sits in a circle around the hub bore at the center of the face, adding another layer of visual hardware to the overall look. A center cap is included.\u003c\/p\u003e\u003cp\u003eOne-Piece Cast Alloy Construction\u003c\/p\u003e\u003cp\u003eThe Mojave is cast in one-piece alloy, a construction that supports the complex geometry this design demands. The split spoke profile, concave face, and simulated beadlock ring are all formed in a single continuous pour, keeping the structural depth of the design intact. At 29 lbs, this wheel comes in below the typical weight for an 18-inch alloy truck wheel in this class. Cast alloy brings proven long-haul reliability and the ability to hold intricate face detail across high production volume.\u003c\/p\u003e\u003cp\u003eOffset and Stance at Zero\u003c\/p\u003e\u003cp\u003eAt 0mm offset, the mounting surface sits exactly at the wheel's centerline, positioning the barrel evenly split between inboard and outboard. On Wrangler and Grand Cherokee platforms, this places the wheel face outboard of stock positioning for a wider, more planted stance. Backspacing measures 5 inches. This wheel is also offered in additional sizes and configurations across the Hostile lineup, covering a range of bolt patterns and finishes for different build directions.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e78.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSatin Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e29 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Hostile","offers":[{"title":"Default Title","offer_id":68713045754137,"sku":"H129-1890512750A","price":456.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/h129_satinblack_5lug_white__08691.jpg?v=1794772615"},{"product_id":"24x14-gloss-black-wheel-hf127-titan-6x5-5-76-hf127-2414655045gb","title":"HF127 Titan Gloss Black | 24x14 | 6x5.5 -76mm Offset | HF127-2414655045GB","description":"\u003cp\u003eBuilt for Lifted Trucks on 6x139.7 Platforms\u003c\/p\u003e\u003cp\u003eThe Hostile Forged HF127 Titan is a 24x14 forged wheel in Gloss Black, drilled for the 6x139.7 (6x5.5) bolt pattern. That pattern covers some of the most popular full-size truck platforms on the road: Chevrolet Silverado 1500 (1999-2026), GMC Sierra 1500 (2000-2026), Toyota Tundra (2000-2026), Toyota Tacoma (1995-2026), and Chevrolet K1500 (1988-1999), with 10 additional verified fits across 114 total platforms. The 106.10mm hub bore fits these 6x139.7 applications, and the 2,600-lb load rating supports full-size truck demands.\u003c\/p\u003e\u003cp\u003eForged Aluminum, Hostile DNA\u003c\/p\u003e\u003cp\u003eHostile Forged brings the brand's aggressive design language into custom forged aluminum, and the Titan is a direct expression of that. Forged from solid aluminum billet pressed under extreme force, the process refines the grain structure throughout the wheel for density and strength that cast construction does not replicate at this scale. At 24 inches across and 14 inches wide, the Titan carries that forged integrity through every load cycle. The result is a wheel that delivers Hostile's signature presence with the craftsmanship to back it up. At 51 lbs, the weight is consistent with what forged construction delivers at this size.\u003c\/p\u003e\u003cp\u003eMulti-Spoke Design with Exposed Lug Hardware\u003c\/p\u003e\u003cp\u003eThe Titan's face runs a multi-spoke layout in Gloss Black, with the lug hardware sitting exposed and visible in a circle around the hub bore at the center of the wheel. That hardware-forward detail is intentional: it adds a mechanical, purposeful look to the face without relying on cosmetic add-ons. The outer lip gives the profile depth, and the Gloss Black finish holds its look across daily use and seasonal conditions. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOffset and Stance at -76mm\u003c\/p\u003e\u003cp\u003eAt -76mm offset, the Titan's mounting surface sits well rearward of the wheel's centerline, pushing the wheel outward for an aggressive, wide-stance look on lifted trucks. The 4.51 inches of backspacing and 10.49 inches of frontspacing reflect just how far outboard this wheel is positioned. This is a combination built for lifted setups where fender clearance is available to run a 14-inch-wide wheel at this offset. The Titan is also offered in additional sizes, widths, and finishes across the Hostile Forged lineup for builds with different fitment targets.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-76 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.51\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eGloss Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eForged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e51 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Hostile","offers":[{"title":"Default Title","offer_id":68713045786905,"sku":"HF127-2414655045GB","price":1093.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/hf127_glossblack_6lug_white__04913.jpg?v=1794772615"},{"product_id":"20x9-gloss-black-wheel-rapture-h601-6x5-5-1-h601-2090655050ga","title":"Rapture H601 Gloss Black | 20x9 | 6x5.5 +1mm Offset | H601-2090655050GA","description":"\u003cp\u003eBuilt for the 6x139.7 Platform\u003c\/p\u003e\u003cp\u003eThe Hostile Rapture H601 lands on one of the most widely shared 6-lug truck patterns in the aftermarket: 6x139.7 (6x5.5). That puts it squarely in the wheelhouse of the Chevrolet Silverado 1500 (1999-2026), GMC Sierra 1500 (2000-2026), Toyota Tacoma (1995-2026), Toyota Tundra (2000-2026), and Chevrolet K1500 (1988-1999), with 10 additional verified platforms across 114 total fitments. The 106.1mm hub bore fits these platforms, and the 2,600-lb load rating supports the demands of full-size and mid-size truck use.\u003c\/p\u003e\u003cp\u003eSplit Eight-Spoke Design with Exposed Hardware\u003c\/p\u003e\u003cp\u003eThe Rapture's face runs a split eight-spoke layout that opens up the disc with angular geometry and visual depth. Each pair of spokes fans outward from the hub, giving the wheel a layered, aggressive profile that suits Hostile's reputation for bold, unmissable truck designs. Lug hardware sits exposed around the hub bore, visible on the face where the wheel mounts to the vehicle, adding an industrial edge to the overall look. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Cast Alloy Construction\u003c\/p\u003e\u003cp\u003eHostile builds the Rapture as a one-piece cast alloy wheel, a construction that supports the deep spoke geometry and contoured face profile the design demands. Cast molds handle complex shapes cleanly, keeping the split-spoke structure and outer lip intact in a single continuous form. At 33.1 lbs, this wheel comes in at a competitive weight for its construction class, a result of the one-piece form keeping material where the structure needs it without unnecessary bulk.\u003c\/p\u003e\u003cp\u003eOffset and Fitment Details\u003c\/p\u003e\u003cp\u003eAt 20x9 with a +1mm offset, the Rapture's mounting surface sits just forward of the wheel's centerline, placing the barrel in a near-centered position relative to the hub. The 5.04 inches of backspacing positions the wheel appropriately for trucks running stock or leveled setups, keeping the wheel tucked within the fender arch without excessive inboard or outboard movement. This is a measured, truck-scaled fitment that works across a broad range of build heights on the 6x139.7 platform.\u003c\/p\u003e\u003cp\u003eFinish and Availability\u003c\/p\u003e\u003cp\u003eThe Rapture ships in a gloss black finish that holds its look against brake dust and road grime without demanding constant upkeep. The clean, high-contrast surface suits the angular spoke design and keeps the wheel's geometry front and center. The Rapture is also offered in additional sizes, widths, and finish options across the lineup for builds with different fitment targets.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5.04\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eGloss Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e38.1 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Hostile","offers":[{"title":"Default Title","offer_id":68713045950745,"sku":"H601-2090655050GA","price":378.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/rapture_glossblack_white__98611.jpg?v=1794772616"},{"product_id":"17x9-satin-black-wheel-crawler-h138-5x5-0-h138-1790512750a","title":"Crawler H138 Satin Black | 17x9 | 5x5 0mm Offset | H138-1790512750A","description":"\u003cp\u003eBuilt for Jeep and Truck Platforms\u003c\/p\u003e\u003cp\u003eJeep Wrangler owners (2007-2026) get a wheel sized and offset for serious builds, and the Hostile Crawler H138 covers the full 5x127 (5x5) bolt pattern that also fits the Jeep Grand Cherokee (1999-2026), Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), GMC Yukon (1992-1999), and 10 additional verified platforms. The 78.10mm hub bore fits these applications, and the 2,600-lb load rating supports the demands of loaded Jeep and truck builds alike.\u003c\/p\u003e\u003cp\u003eTen-Spoke Concave Design\u003c\/p\u003e\u003cp\u003eThe Crawler's face runs ten spokes in a concave profile, pulling the center of the wheel back from the outer lip and giving the design a sense of depth that flat-faced wheels don't carry. Lug hardware sits exposed around the hub bore, visible on the face and adding a hardware-forward look that suits the Crawler's aggressive character. The outer lip frames the concave face and adds to the overall visual depth of the wheel. Satin Black (Asphalt) keeps the finish muted and purposeful, holding its look through trail dust, road grime, and seasonal wear without demanding constant upkeep. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eHostile builds the Crawler as a one-piece cast alloy wheel, and the construction supports the complex ten-spoke concave geometry that defines the design. Cast alloy molds support deep spoke profiles, undercuts, and contoured lips in a single continuous shape, keeping the structural integrity intact through every load cycle. At 28.9 lbs, the Crawler delivers proven long-haul value that makes it a practical choice for daily-driven Jeeps and trucks running aggressive fitment.\u003c\/p\u003e\u003cp\u003eOffset and Stance Details\u003c\/p\u003e\u003cp\u003eAt 17x9 with a 0mm offset, the mounting surface sits exactly at the wheel's centerline, placing the barrel evenly split between inboard and outboard. This neutral offset works well across lifted Jeep and truck builds where the suspension geometry already pushes the wheel outward, letting the 9-inch width fill the fender arch without requiring additional correction. Backspacing measures 5 inches. The Crawler is also offered in additional sizes, widths, and finishes across the Hostile lineup to suit a range of build targets.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e78.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSatin Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e32.4 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Hostile","offers":[{"title":"Default Title","offer_id":68713045917977,"sku":"H138-1790512750A","price":332.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/crawler_satinblack_56lug_white__20005.jpg?v=1794772616"},{"product_id":"24x14-polished-wheel-hf127-titan-6x5-5-76-hf127-2414655045p","title":"HF127 Titan Polished | 24x14 | 6x5.5 -76mm Offset | HF127-2414655045P","description":"\u003cp\u003eBuilt for the 6x139.7 Platform\u003c\/p\u003e\u003cp\u003eThe Hostile Forged HF127 Titan is a 24x14 polished forged wheel drilled for the 6x139.7 (6x5.5) bolt pattern, covering a wide range of full-size truck and mid-size truck platforms. Verified fitment includes the Chevrolet Silverado 1500 (1999-2026), GMC Sierra 1500 (2000-2026), Toyota Tundra (2000-2026), Toyota Tacoma (1995-2026), and Chevrolet K1500 (1988-1999), with 10 additional verified platforms in the fitment universe. The 106.10mm hub bore fits these 6x139.7 applications, and the 2,600-lb load rating supports full-size truck payloads.\u003c\/p\u003e\u003cp\u003eForged Aluminum, Built to Order\u003c\/p\u003e\u003cp\u003eHostile Forged brings the brand's aggressive design DNA into custom forged aluminum, and the Titan is a prime example of what that means in practice. Starting from solid aluminum billet pressed under extreme force, forging refines the grain structure throughout the wheel for a level of density and strength that makes it the gold standard for show and performance applications demanding the most from their hardware. At 24 inches and 14 inches wide, the Titan carries that forged integrity across a scale where it matters most. The one-piece construction keeps the design cohesive from hub to barrel, and at 51 lbs, the weight is consistent with what forged aluminum delivers at this size.\u003c\/p\u003e\u003cp\u003ePolished Finish and Multi-Spoke Design\u003c\/p\u003e\u003cp\u003eThe Titan's polished finish is the defining visual statement here. Full polished aluminum reflects light across the entire face, giving the wheel a mirror-bright appearance that suits show builds and attention-forward truck setups. The multi-spoke design opens up the disc with a complex spoke arrangement that adds visual depth without cluttering the design. Exposed lug hardware sits in a circle around the hub bore at the center of the face, visible against the polished surface for a purposeful, hardware-forward look. A center cap is included. The outer lip adds further depth to the profile, and at 14 inches wide, there is substantial barrel presence to work with.\u003c\/p\u003e\u003cp\u003eOffset and Stance at -76mm\u003c\/p\u003e\u003cp\u003eA -76mm offset on a 14-inch-wide wheel is among the most aggressive combinations available in the 6x139.7 fitment universe. At this offset, the mounting surface sits well rearward of the wheel's centerline, pushing the face and barrel outward for maximum poke and a wide, planted stance. Backspacing measures 4.51 inches. This combination is built for lifted truck setups where fender clearance and suspension travel have been accounted for, and where the goal is a dominant, wide-track presence. The Titan is also offered in additional sizes, widths, and finishes across the Hostile Forged lineup for builds with different fitment targets.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-76 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.51\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePolished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eForged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e51 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Hostile","offers":[{"title":"Default Title","offer_id":68713046180121,"sku":"HF127-2414655045P","price":1240.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/hf127_polished_6lug_white__97039.jpg?v=1794772616"},{"product_id":"17x9-satin-black-wheel-h129-6x135-0-h129-1790613550a","title":"H129 Mojave Satin Black | 17x9 | 6x135 0mm Offset | H129-1790613550A","description":"\u003cp\u003eBuilt for Ford's 6x135 Platform\u003c\/p\u003e\u003cp\u003eThe Hostile Mojave is drilled for the 6x135 bolt pattern, covering Ford F-150 (2004-2026), Ford Expedition (2003-2027), Lincoln Navigator (2003-2027), Ford F-150 Lightning (2022-2026), and Ford Bronco (2022-2026), with one additional verified platform in the fitment universe. The 87mm hub bore fits these Ford and Lincoln platforms. At 17x9 with a 0mm offset, the mounting surface sits exactly at the wheel's centerline, placing the barrel evenly split between inboard and outboard. That centered position works well across stock, leveled, and lifted setups on these platforms. The 2,600-lb load rating supports the payload demands of full-size truck and SUV applications, and 5 inches of backspacing rounds out the fitment profile.\u003c\/p\u003e\u003cp\u003eSimulated Beadlock Style, Exposed Hardware\u003c\/p\u003e\u003cp\u003eThe Mojave's defining visual is its simulated beadlock ring, which wraps the outer face with the bold, ring-bolted look of a competition off-road wheel. Rivets run the ring's perimeter, adding to the rugged, hardware-forward character Hostile is known for. The lug hardware is exposed and visible on the face, sitting in a circle around the hub bore where the wheel mounts to the vehicle. That combination of exposed lugs, rivets, and the beadlock ring gives the Mojave a layered, intentional look that suits lifted Ford builds. The concave face profile adds depth behind the ring, pulling the center of the wheel back for a more dimensional appearance. A center cap is included.\u003c\/p\u003e\u003cp\u003eOne-Piece Cast Alloy Construction\u003c\/p\u003e\u003cp\u003eThe Mojave is cast in one-piece alloy, a construction that supports the complex face geometry this design demands. The simulated beadlock ring, concave face, and multi-spoke layout are all formed in a single continuous pour, keeping the design's structural depth intact. At 27.12 lbs, this wheel comes in under the typical weight for a 17-inch alloy truck wheel in its class. Cast construction also delivers the long-haul value that makes it a practical choice for daily-driven trucks and weekend builds alike.\u003c\/p\u003e\u003cp\u003eSplit Multi-Spoke Design in Satin Black\u003c\/p\u003e\u003cp\u003eThe face runs a split multi-spoke layout with a satin black finish across the entire wheel. Satin black sits between matte and gloss, giving the Mojave a subdued, non-reflective look that holds up well through road grime and seasonal use without demanding constant attention. The split spokes radiate outward from the hub toward the simulated beadlock ring, creating visual movement across the face. No machined or milled surfaces break the finish, keeping the look consistent and clean from hub to ring.\u003c\/p\u003e\u003cp\u003eFitment Across the Ford Lineup\u003c\/p\u003e\u003cp\u003eFord F-150 owners across the 2004-2026 model range get a wheel sized for the platform's 6x135 bolt pattern, and the same fitment extends to the Expedition and Navigator through 2027, the F-150 Lightning through 2026, and the Bronco through 2026. The Mojave is also offered in additional sizes and finishes across the Hostile lineup for builds that need a different combination.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x135\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSatin Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e32.63 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Hostile","offers":[{"title":"Default Title","offer_id":68713046212889,"sku":"H129-1790613550A","price":416.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/h129_satinblack_6lug_white__24611.jpg?v=1794772617"},{"product_id":"20x9-silver-machined-wheel-rapture-h601-6x5-5-1-h601-2090655050m","title":"Rapture H601 Silver Machined | 20x9 | 6x5.5 +1mm Offset | H601-2090655050M","description":"\u003cp\u003eBuilt for the 6x139.7 Platform\u003c\/p\u003e\u003cp\u003eThe Hostile Rapture H601 lands on one of the most widely shared 6-lug truck patterns in the aftermarket: 6x139.7 (6x5.5). Verified fitment spans 114 platforms, including the Chevrolet Silverado 1500 (1999-2026), GMC Sierra 1500 (2000-2026), Toyota Tacoma (1995-2026), Toyota Tundra (2000-2026), and Chevrolet K1500 (1988-1999), among 10 additional verified applications. The 106.10mm hub bore fits these platforms, and the 2,600-lb load rating supports the demands of full-size and mid-size truck use.\u003c\/p\u003e\u003cp\u003eSplit Eight-Spoke Design with Exposed Hardware\u003c\/p\u003e\u003cp\u003eThe Rapture's face runs a split eight-spoke layout with the spoke faces machined to a brighter contrast against the gloss silver surfaces. Each pair of split spokes tapers outward from the hub, giving the face a layered, dimensional look that suits Hostile's bold design identity. The lug hardware sits exposed around the hub bore, visible on the face as part of the wheel's intentional aesthetic. A center cap (HC-6008C) is included and covers the hub area when installed. The outer lip adds profile depth to the 20-inch diameter, and the non-directional pattern means mounting orientation is flexible.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eThe Rapture is cast in one-piece alloy, a construction that supports the complex split-spoke geometry and machined spoke faces in a single continuous shape. Cast alloy molds accommodate the deep spoke profiles and contoured transitions that define the Rapture's face without compromising structural integrity across the load cycle. At 33.1 lbs, this wheel comes in at a competitive weight for its construction class, keeping unsprung mass in check across the full-size and mid-size truck platforms it fits.\u003c\/p\u003e\u003cp\u003eOffset and Fitment Details\u003c\/p\u003e\u003cp\u003eAt 20x9 with a +1mm offset, the mounting surface sits nearly at the wheel's centerline, positioning the barrel evenly between the inner and outer edges. The 5.04 inches of backspacing reflects that near-zero offset, placing the wheel face close to flush with the fender plane on most 6x139.7 truck applications. This is a balanced, truck-scaled setup suited to stock, leveled, and modestly lifted builds alike. The Rapture is also offered in additional sizes, widths, and finishes across the lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5.04\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSilver Machined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e38.1 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Hostile","offers":[{"title":"Default Title","offer_id":68713046278425,"sku":"H601-2090655050M","price":378.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/rapture_silvermachined_white__92399.jpg?v=1794772617"},{"product_id":"18x9-bronze-black-wheel-crawler-h138-5x5-12-h138-1890512745z","title":"Crawler H138 Bronze Black | 18x9 | 5x5 -12mm Offset | H138-1890512745Z","description":"\u003cp\u003eBuilt for the 5x127 Platform\u003c\/p\u003e\u003cp\u003eJeep Wrangler owners (2007-2026) will find the Hostile Crawler H138 sized and offset for the platform's wide fender arches and aggressive proportions. The 5x127 (5x5) bolt pattern also fits Jeep Grand Cherokee (1999-2026), Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), with 10 additional verified platforms in the fitment universe. The 78.10mm hub bore fits these applications, and the 2,600-lb load rating supports the demands of loaded Jeep and truck builds.\u003c\/p\u003e\u003cp\u003eConcave Face, Exposed Hardware, Black Lip\u003c\/p\u003e\u003cp\u003eThe Crawler carries Hostile's signature bold character in a 10-spoke concave design. The face pulls inward toward the hub, giving the wheel visual depth that suits the scale of full-size Jeep and truck builds. Lug hardware sits exposed around the hub bore on the wheel face, visible and intentional rather than hidden behind a cap. The outer lip runs in a contrasting gloss black, framing the bronze face and adding a two-tone edge to the profile. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eThe Crawler is cast in one-piece alloy, a construction that supports the complex concave geometry and deep spoke profile this design demands. Cast alloy molds support the contoured face and the inward sweep of the concave in a single continuous shape, keeping the design's structural depth intact. At 33 lbs, the wheel carries the structural integrity for the off-road and daily-driven builds this platform attracts.\u003c\/p\u003e\u003cp\u003eOffset and Fitment Details\u003c\/p\u003e\u003cp\u003eAt 18x9 with a -12mm offset, the mounting surface sits rearward of the wheel's centerline, pushing the wheel outward for a more aggressive stance than stock positioning. The 4.53 inches of backspacing positions the wheel face outboard, which suits builds running a lift kit where additional clearance opens up room for the wider wheel position. The Crawler is also offered in additional sizes, widths, and finishes across the lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.53\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e78.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBronze Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e37.5 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Hostile","offers":[{"title":"Default Title","offer_id":68713046376729,"sku":"H138-1890512745Z","price":358.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/crawler_bronzeblack_56lug_white__56415.jpg?v=1794772617"},{"product_id":"22x12-gloss-black-wheel-hf15-phantom-6x5-5-44-hf15-2212655047gb","title":"HF15 Phantom Gloss Black | 22x12 | 6x5.5 -44mm Offset | HF15-2212655047GB","description":"\u003cp\u003eBuilt for the 6x139.7 Platform\u003c\/p\u003e\u003cp\u003eChevrolet Silverado 1500 owners (1999-2026), GMC Sierra 1500 owners (2000-2026), Toyota Tacoma (1995-2026), Toyota Tundra (2000-2026), and Chevrolet K1500 (1988-1999) all share the 6x139.7 (6x5.5) bolt pattern that the Hostile Forged HF15 Phantom is drilled for. The 106.10mm hub bore fits these platforms, and the 2,600-lb load rating supports full-size truck demands. Beyond these five platforms, the Phantom spans 10 additional verified fits across the 6x139.7 universe.\u003c\/p\u003e\u003cp\u003eSplit Eight-Spoke Design, Gloss Black Finish\u003c\/p\u003e\u003cp\u003eThe Phantom runs a split eight-spoke layout that gives the face an open, layered look with visual depth across the full 22-inch diameter. Eight split spokes radiate outward from the hub, each dividing as they extend toward the outer edge, creating a pattern that holds its presence at any viewing angle. Gloss black keeps the finish sharp and consistent, complementing both blacked-out builds and two-tone truck setups. Lug hardware sits exposed on the face around the hub bore, adding a purposeful, hardware-forward detail to the overall look. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eForged Construction, Competitive Weight\u003c\/p\u003e\u003cp\u003eHostile Forged brings the same aggressive design DNA as the Hostile lineup but backs it with forged aluminum construction. The Phantom is built one-piece from a solid aluminum billet pressed under extreme force, refining the grain structure for density and strength throughout the wheel. At 45 lbs, this 22x12 forged wheel comes in below the typical weight range for its construction class, a meaningful advantage when you are running a large-diameter, wide-barrel setup on a full-size truck.\u003c\/p\u003e\u003cp\u003eFitment Details That Shape the Build\u003c\/p\u003e\u003cp\u003eThe Silverado 1500 and Sierra 1500 are the natural home for this wheel, and the Phantom's proportions are sized for those platforms running a lift kit. At 22 inches in diameter and 12 inches wide, with a -44mm offset, the mounting surface sits well rearward of the wheel's centerline, pushing the wheel outward for an aggressive, wide-stance look. Backspacing measures 4.77 inches. This offset and width combination qualifies as genuinely aggressive fitment, and a lift kit is the right pairing to take full advantage of the outboard wheel position and clear the wider barrel. The Phantom is also offered in additional sizes, widths, and finishes across the Hostile Forged lineup for builds with different fitment targets.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-44 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.77\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eGloss Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eForged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e45 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Hostile","offers":[{"title":"Default Title","offer_id":68713046573337,"sku":"HF15-2212655047GB","price":824.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/hf15_glossblack_6lug_white__52158.jpg?v=1794772617"},{"product_id":"20x9-satin-black-wheel-h129-6x135-12-h129-2090613545a","title":"H129 Mojave Satin Black | 20x9 | 6x135 -12mm Offset | H129-2090613545A","description":"\u003cp\u003eFord's 6x135 Platform, Built for Bold Stance\u003c\/p\u003e\u003cp\u003eThe Hostile Mojave is sized for Ford's 6x135 bolt pattern, fitting the F-150 (2004-2026), Ford Expedition (2003-2027), Lincoln Navigator (2003-2027), Ford F-150 Lightning (2022-2026), and Ford Bronco (2022-2026), with one additional verified platform in the lineup. At 20x9 with a -12mm offset, the mounting surface sits rearward of the wheel's centerline, pushing the wheel outward for a more aggressive, outboard stance than stock. The 87mm hub bore fits these Ford platforms, and the 2,600-lb load rating supports full-size truck and SUV payloads.\u003c\/p\u003e\u003cp\u003eSimulated Beadlock, Exposed Lugs, and Rivets\u003c\/p\u003e\u003cp\u003eThe Mojave's face is where Hostile's design language comes through clearly. A simulated beadlock ring wraps the outer edge, giving the wheel the rugged, trail-ready look of a true beadlock without the added complexity. Rivets accent the ring, reinforcing the aggressive character of the design. The lug hardware is exposed and visible, sitting in a circle around the hub bore at the center of the face, adding to the raw, purposeful look that defines this wheel. The concave face profile adds depth to the design, drawing the eye inward toward the hub.\u003c\/p\u003e\u003cp\u003eOne-Piece Cast Alloy Construction\u003c\/p\u003e\u003cp\u003eThe Mojave is built as a single-piece cast alloy wheel. Cast construction supports the complex face geometry here, including the concave profile, multi-spoke layout, and the detailed simulated beadlock ring, in a continuous shape that holds its form through every load cycle. At 34.83 lbs, this wheel comes in under the typical weight for a 20-inch alloy truck wheel in this class. A center cap is included.\u003c\/p\u003e\u003cp\u003eFitment Details for the F-150 and Beyond\u003c\/p\u003e\u003cp\u003eFord F-150 owners running a leveling kit or lift kit will find the -12mm offset positions the wheel outboard of the stock mounting depth, widening the visual stance across the front and rear axles. The 4.53 inches of backspacing keeps the wheel's inner edge clear of suspension components on these platforms. The Bronco and F-150 Lightning fitment extends the Mojave's reach across Ford's broader 6x135 lineup, covering six verified platforms in total. The Mojave is also offered in additional sizes and finish options across the Hostile lineup for builds with different fitment targets.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x135\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.53\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSatin Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e41.89 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Hostile","offers":[{"title":"Default Title","offer_id":68713046671641,"sku":"H129-2090613545A","price":507.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/h129_satinblack_6lug_white__04384.jpg?v=1794772618"},{"product_id":"20x9-gloss-black-wheel-rapture-h601-6x5-5-18-h601-2090655057ga","title":"Rapture H601 Gloss Black | 20x9 | 6x5.5 +18mm Offset | H601-2090655057GA","description":"\u003cp\u003eBuilt for the 6x139.7 Platform\u003c\/p\u003e\u003cp\u003eThe Hostile Rapture H601 lands on the most popular 6-lug truck bolt pattern in the game: 6x139.7 (6x5.5). Chevrolet Silverado 1500 owners from 1999 through 2026, GMC Sierra 1500 from 2000 through 2026, Toyota Tacoma from 1995 through 2026, Toyota Tundra from 2000 through 2026, and the Chevrolet K1500 from 1988 through 1999 are all confirmed fits, with 10 additional verified platforms beyond those five. The 106.1mm hub bore fits these GM and Toyota full-size and mid-size truck platforms. Total verified fitment spans 114 platforms across the 6x139.7 universe.\u003c\/p\u003e\u003cp\u003eSplit Eight-Spoke Design with Exposed Lugs\u003c\/p\u003e\u003cp\u003eThe Rapture's face runs eight split spokes that fan outward from the hub in pairs, giving the wheel an open, layered look with real visual depth. Lug hardware sits exposed around the hub bore at the center of the face, adding a hardware-forward detail that fits Hostile's no-apologies aesthetic. The outer lip frames the barrel profile and adds dimension to the overall silhouette. Gloss black keeps the finish sharp and consistent across the face, spokes, and barrel without any machined or milled contrast breaking up the look. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Cast Alloy Construction\u003c\/p\u003e\u003cp\u003eThe Rapture is cast in one piece from alloy, a construction that supports the deep split-spoke geometry and outer lip profile in a single continuous form. Cast alloy handles complex face shapes well, holding the spoke detail and hub geometry without the assembly complexity of a multi-piece build. At 33.1 lbs, this wheel comes in at a competitive weight for its construction class, keeping unsprung mass in check across a full set. The 2,600-lb load rating supports the payload demands of full-size and mid-size truck applications.\u003c\/p\u003e\u003cp\u003eOffset and Fitment Details\u003c\/p\u003e\u003cp\u003eAt 20x9 with a +18mm offset, the Rapture's mounting surface sits forward of the wheel's centerline, positioning the barrel closer to the vehicle. The 5.71 inches of backspacing reflects that inboard positioning. This is a truck-scaled combination that works across stock, leveled, and lifted setups without pushing the wheel aggressively outboard. The proportions suit builds where a clean, planted stance is the goal rather than maximum poke. The Rapture is also offered in additional sizes, widths, and finishes across the lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e18 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5.71\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eGloss Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e38.1 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Hostile","offers":[{"title":"Default Title","offer_id":68713046704409,"sku":"H601-2090655057GA","price":378.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/rapture_glossblack_white__99503.jpg?v=1794772618"},{"product_id":"18x9-machined-wheel-crawler-h138-5x5-12-h138-1890512745m","title":"Crawler H138 Machined | 18x9 | 5x5 -12mm Offset | H138-1890512745M","description":"\u003cp\u003eJeep and Truck Fitment on 5x127\u003c\/p\u003e\u003cp\u003eJeep Wrangler owners (2007-2026) will find the Hostile Crawler H138 sized and offset for their platform right out of the box. The 5x127 (5x5) bolt pattern also fits the Jeep Grand Cherokee (1999-2026), Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), with 10 additional verified platforms in the fitment universe. The 78.10mm hub bore fits these 5x127 applications, and the 2,600-lb load rating supports the demands of lifted truck and Jeep builds.\u003c\/p\u003e\u003cp\u003eTen-Spoke Concave Design\u003c\/p\u003e\u003cp\u003eThe Crawler's face runs ten spokes arranged in a concave profile, pulling the center of the wheel back and giving the face a deep, sculpted look that suits Hostile's bold design language. The machined finish brings out the aluminum's natural brightness across the spoke faces and barrel, with the contrast between the machined surfaces and the surrounding material adding visual definition to the design. Exposed lug hardware sits in a circle around the hub bore at the center of the face, keeping the mounting hardware visible and on display as part of the overall look. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eThe Crawler is built as a one-piece alloy wheel, a construction that supports the deep concave spoke geometry and outer lip profile in a single continuous shape. Cast alloy handles complex face geometries well, carrying the ten-spoke concave profile and the outer lip from hub to barrel without seams or assembly hardware. At 33 lbs, the wheel carries the structural integrity the 2,600-lb load rating demands across the range of lifted Jeep and truck applications this platform serves.\u003c\/p\u003e\u003cp\u003eOffset and Stance Details\u003c\/p\u003e\u003cp\u003eAt -12mm offset on a 9-inch-wide wheel, the mounting surface sits rearward of the wheel's centerline, moving the face outward relative to the hub. The 4.53 inches of backspacing positions the wheel for the clearance needs of lifted Wrangler and truck builds running this 5x127 pattern. The outer lip is a visible design element at this offset, framing the concave face profile from the outside edge.\u003c\/p\u003e\u003cp\u003eMore Ways to Run the Crawler\u003c\/p\u003e\u003cp\u003eThe Hostile Crawler is offered across additional sizes, widths, offsets, and finish options beyond this 18x9 machined example, covering a range of builds on the 5x127 platform and beyond.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.53\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e78.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eMachined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e37.5 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Hostile","offers":[{"title":"Default Title","offer_id":68713046802713,"sku":"H138-1890512745M","price":358.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/crawler_machined_56lug_white__45070.jpg?v=1794772618"},{"product_id":"22x12-polished-wheel-hf15-phantom-6x5-5-44-hf15-2212655047p","title":"HF15 Phantom Polished | 22x12 | 6x5.5 -44mm Offset | HF15-2212655047P","description":"\u003cp\u003eBuilt for the 6x139.7 Platform\u003c\/p\u003e\u003cp\u003eChevrolet Silverado 1500 and GMC Sierra 1500 owners running the 6x139.7 (6x5.5) bolt pattern are the natural home for the Hostile Forged HF15 Phantom. This 22x12 wheel also fits Toyota Tacoma, Toyota Tundra, and the Chevrolet K1500, with 10 additional verified platforms across 114 total fitments. The 106.10mm hub bore fits these 6x139.7 truck platforms, and the 2,600-lb load rating supports the demands of full-size truck use.\u003c\/p\u003e\u003cp\u003eSplit Eight-Spoke Design in Polished Forged Aluminum\u003c\/p\u003e\u003cp\u003eThe Phantom carries a split eight-spoke design that gives the face an open, layered look with visual depth across the full 22-inch diameter. Eight split spokes radiate from the hub area, where the lug hardware sits exposed and visible in a circle around the hub bore, adding a purposeful, hardware-forward detail to the face. A center cap is included with this wheel. The polished finish brings out the natural brightness of the forged aluminum, delivering a clean, mirror-like surface that suits the Phantom's aggressive proportions without relying on paint or powdercoat.\u003c\/p\u003e\u003cp\u003eForged One-Piece Construction\u003c\/p\u003e\u003cp\u003eHostile Forged builds the Phantom as a one-piece forged wheel, and the construction reflects the premium tier the brand occupies within the Hostile lineup. Solid aluminum billet pressed under extreme force refines the grain structure throughout the wheel, producing a dense, strong piece that carries the Phantom's aggressive 22x12 proportions with confidence. At 45 lbs, this wheel comes in at a competitive weight for its construction class, a direct result of forging's ability to achieve structural density without excess material.\u003c\/p\u003e\u003cp\u003eOffset and Fitment Details\u003c\/p\u003e\u003cp\u003eAt -44mm offset on a 12-inch-wide barrel, the Phantom's mounting surface sits well rearward of centerline, pushing the wheel outward for an aggressive, wide stance that commands attention on lifted truck builds. The 4.77 inches of backspacing positions the wheel face outboard, and the 8.23 inches of front spacing gives the face its prominent outward presence. This is a combination built for trucks running a lift kit, where the extra clearance lets the full width and outboard positioning work as intended.\u003c\/p\u003e\u003cp\u003eAdditional Configurations Available\u003c\/p\u003e\u003cp\u003eThe HF15 Phantom is offered across additional sizes, finishes, and bolt-pattern options beyond this 22x12 polished setup, including both 6-lug and 8-lug patterns to cover a wider range of truck platforms.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-44 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.77\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePolished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eForged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e45 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Hostile","offers":[{"title":"Default Title","offer_id":68713046933785,"sku":"HF15-2212655047P","price":935.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/hf15_polished_6lug_white__74925.jpg?v=1794772619"},{"product_id":"20x9-silver-machined-wheel-rapture-h601-6x5-5-18-h601-2090655057m","title":"Rapture H601 Silver Machined | 20x9 | 6x5.5 +18mm Offset | H601-2090655057M","description":"\u003cp\u003eBuilt for the 6x139.7 Platform\u003c\/p\u003e\u003cp\u003eThe Hostile Rapture H601 lands squarely in the 6x139.7 (6x5.5) bolt pattern universe, covering Chevrolet Silverado 1500 (1999-2026), GMC Sierra 1500 (2000-2026), Toyota Tacoma (1995-2026), Toyota Tundra (2000-2026), and Chevrolet K1500 (1988-1999), with 10 additional verified platforms across 114 total fitments. The 106.1mm hub bore fits these platforms, and the 2,600-lb load rating supports full-size truck payloads. Backspacing measures 5.71 inches.\u003c\/p\u003e\u003cp\u003eSplit Eight-Spoke Design with Exposed Hardware\u003c\/p\u003e\u003cp\u003eThe Rapture's face runs a split eight-spoke layout, with each pair of spokes branching outward from the hub in a clean, symmetrical pattern. The spoke faces are machined to a brighter contrast against the gloss silver background, giving the wheel visual depth without layering on extra detail. Lug hardware sits exposed in a ring around the hub bore, visible on the face and adding a purposeful, hardware-forward look that fits Hostile's no-apologies design language. A center cap is included with this wheel. The outer lip adds profile to the overall silhouette, and the non-directional pattern works on any corner of the truck.\u003c\/p\u003e\u003cp\u003eOne-Piece Cast Alloy Construction\u003c\/p\u003e\u003cp\u003eThe Rapture is cast in one-piece alloy, a construction that supports the split-spoke geometry and machined spoke faces in a single continuous shape. Cast alloy handles the complex spoke branching and contoured face detail without compromise, and at 33.1 lbs this wheel comes in at a competitive weight for its construction class. The one-piece build keeps the structural integrity intact from hub to barrel through every load cycle.\u003c\/p\u003e\u003cp\u003eFitment Details for the 20x9 Size\u003c\/p\u003e\u003cp\u003eAt 20 inches in diameter and 9 inches wide with a +18mm offset, the mounting surface sits forward of the wheel's centerline, positioning the wheel closer to the visible face side. That offset keeps the wheel tucked within the fender arch on stock and leveled Silverado, Sierra, Tacoma, and Tundra builds, making this a practical size for trucks that want a clean, intentional stance without aggressive outboard push. The 20x9 footprint works across a wide range of tire sizes commonly run on these platforms.\u003c\/p\u003e\u003cp\u003eMore Configurations Available\u003c\/p\u003e\u003cp\u003eThe Rapture is offered in additional sizes, widths, finishes, and bolt patterns beyond this 20x9 Silver Machined setup, including both 6-lug and 8-lug options to cover a broader range of truck platforms.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e18 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5.71\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSilver Machined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e38.1 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Hostile","offers":[{"title":"Default Title","offer_id":68713047032089,"sku":"H601-2090655057M","price":378.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/rapture_silvermachined_white__44506.jpg?v=1794772619"},{"product_id":"18x9-satin-black-wheel-h129-8x6-5-1-h129-1890816550a","title":"H129 Mojave Satin Black | 18x9 | 8x6.5 +1mm Offset | H129-1890816550A","description":"\u003cp\u003eHeavy-Duty Bolt Pattern, Bold Hostile Character\u003c\/p\u003e\u003cp\u003eThe Ram 2500, Silverado 2500 HD, and Sierra 2500 HD are the natural home for the Hostile Mojave. This 18x9 wheel is drilled for the 8x165.1 (8x6.5) bolt pattern, covering Ram 2500 from 1994 through current production, Chevrolet Silverado 2500 HD and GMC Sierra 2500 HD from 2001 to 2010, and Dodge Ram 1500 from 2006 to 2008, among 99 total verified fits. The 125.20mm hub bore fits these heavy-duty platforms, and the 3,700-lb load rating is built for the payload and towing demands that come with running a work-capable truck.\u003c\/p\u003e\u003cp\u003eSimulated Beadlock, Exposed Hardware, Concave Face\u003c\/p\u003e\u003cp\u003eThe Mojave's face is where Hostile's design intent comes through clearly. Split spokes radiate outward in a multi-spoke pattern with a concave profile that gives the face visual depth. A simulated beadlock ring wraps the outer edge, adding the rugged, off-road-ready look that defines the Hostile lineup without the complexity of a functional beadlock. Rivets accent the beadlock ring, reinforcing the aggressive character of the design. Lug hardware sits exposed around the hub bore, visible on the face and adding to the purposeful, hardware-forward aesthetic. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Cast Alloy Construction\u003c\/p\u003e\u003cp\u003eThe Mojave is built as a one-piece cast alloy wheel. Cast construction supports the complex face geometry here: the concave spoke profile, the simulated beadlock ring, and the multi-spoke layout all come from a single continuous pour, keeping the design's structural depth intact. At 31.31 lbs, this wheel comes in under the typical weight for an 18-inch alloy truck wheel in this class, a solid result for a one-piece design carrying a 3,700-lb load rating.\u003c\/p\u003e\u003cp\u003eSatin Black Finish for the Long Haul\u003c\/p\u003e\u003cp\u003eThe Satin Black finish with simulated beadlock ring gives the Mojave a muted, non-reflective look that suits lifted heavy-duty truck builds. Satin holds up well against brake dust and road grime without demanding the upkeep that a high-gloss or chrome finish requires, making it a practical choice for trucks that see real use. The +1mm offset places the mounting surface just forward of the wheel's centerline, keeping the wheel positioned close to the hub for a tucked, controlled stance that works well on stock and lifted setups alike.\u003c\/p\u003e\u003cp\u003eFitment Across the Heavy-Duty Lineup\u003c\/p\u003e\u003cp\u003eWith 5.04 inches of backspacing and a +1mm offset, the Mojave sits close to center on the hub, a geometry that suits the wide fender arches of full-size HD trucks without pushing aggressively outboard. The 8x165.1 (8x6.5) bolt pattern is the standard for these platforms, and the Mojave is verified across 99 fitments covering Ram, Chevrolet, and GMC heavy-duty applications. The Mojave is also offered in additional sizes, widths, and finishes across the Hostile lineup for builds with different fitment targets.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e8x165.1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5.04\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e125.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSatin Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e3700 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e37.26 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Hostile","offers":[{"title":"Default Title","offer_id":68713047097625,"sku":"H129-1890816550A","price":456.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/h129_satinblack_8lug_white__99641.jpg?v=1794772619"},{"product_id":"18x9-satin-black-wheel-crawler-h138-5x5-12-h138-1890512745a","title":"Crawler H138 Satin Black | 18x9 | 5x5 -12mm Offset | H138-1890512745A","description":"\u003cp\u003eBuilt for Jeep and Truck Platforms\u003c\/p\u003e\u003cp\u003eJeep Wrangler owners (2007-2026) get a wheel sized and offset for lifted builds, and the Hostile Crawler H138 covers a wide range of 5x127 (5x5) platforms beyond that: Jeep Grand Cherokee (1999-2026), Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), GMC Yukon (1992-1999), and 10 additional verified applications across 32 total fitments. The 78.10mm hub bore fits these platforms, and the 2,600-lb load rating supports the demands of lifted truck and SUV use.\u003c\/p\u003e\u003cp\u003eTen-Spoke Concave Design\u003c\/p\u003e\u003cp\u003eThe Crawler's face runs ten spokes in a concave profile, pulling the center of the wheel rearward so the outer lip frames a visually deep dish. Exposed lug hardware sits in a ring around the hub bore at the center of the face, keeping the mounting hardware visible and part of the wheel's industrial look. The Satin Black (Asphalt) finish gives the face a flat, non-reflective tone that holds its character through trail dust and road grime without demanding constant upkeep.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eThe Crawler is cast as a single piece of alloy, a construction that supports the deep concave geometry and ten-spoke profile in one continuous shape from hub to barrel. Cast alloy handles complex face geometry well, maintaining the spoke depth and outer lip contour through the full load cycle. At 33 lbs, the wheel carries the structural integrity for lifted-truck and off-road applications. Backspacing measures 4.53 inches.\u003c\/p\u003e\u003cp\u003eOffset and Stance at -12mm\u003c\/p\u003e\u003cp\u003eAt -12mm, the mounting surface sits just rearward of the wheel's centerline, pushing the face slightly outboard of stock positioning. On Jeep Wrangler and similar 5x127 platforms, this offset places the wheel face with a modest outboard lean that suits lifted setups without going to an extreme poke. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eMore Configurations Available\u003c\/p\u003e\u003cp\u003eThe Hostile Crawler is offered across additional sizes, widths, and finishes beyond this 18x9 Satin Black setup, with both 6-lug and 8-lug bolt patterns available across the lineup for broader truck and SUV fitment.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.53\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e78.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSatin Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e37.5 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Hostile","offers":[{"title":"Default Title","offer_id":68713047163161,"sku":"H138-1890512745A","price":358.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/crawler_satinblack_56lug_white__20098.jpg?v=1794772619"},{"product_id":"22x14-gloss-black-wheel-hf15-phantom-6x5-5-76-hf15-2214655045gb","title":"HF15 Phantom Gloss Black | 22x14 | 6x5.5 -76mm Offset | HF15-2214655045GB","description":"\u003cp\u003eBuilt for the 6x139.7 Platform\u003c\/p\u003e\u003cp\u003eThe Chevrolet Silverado 1500, GMC Sierra 1500, Toyota Tundra, Toyota Tacoma, and Chevrolet K1500 all share the 6x139.7 (6x5.5) bolt pattern, and the Hostile Forged HF15 Phantom is sized to make a statement on every one of them. The 106.10mm hub bore fits these platforms, and the 2,600-lb load rating supports the demands of a full-size truck build. Beyond the five platforms named here, this wheel spans 114 verified fits across the 6x139.7 universe.\u003c\/p\u003e\u003cp\u003eForged One-Piece Construction\u003c\/p\u003e\u003cp\u003eHostile Forged brings the brand's aggressive design DNA into custom forged aluminum, and the Phantom is a prime example of what that means in practice. A solid aluminum billet is pressed under extreme force, refining the grain structure throughout the wheel for density and strength that cast construction cannot replicate at this scale. At 45 lbs for a 22x14-inch forged wheel, the Phantom comes in below what this size typically demands from the construction class, a direct result of the material efficiency forging allows. One-piece construction keeps the geometry continuous from hub to barrel, with no seams or hardware to manage over time.\u003c\/p\u003e\u003cp\u003eSplit Eight-Spoke Design with Exposed Lugs\u003c\/p\u003e\u003cp\u003eThe Phantom runs a split eight-spoke layout across a 22-inch face, with each pair of spokes branching outward from the hub in a clean, open pattern that gives the wheel visual depth without crowding the face. Lug hardware sits exposed in a ring around the hub bore, visible on the face and adding a purposeful, hardware-forward look to the overall design. The gloss black finish runs across the entire wheel, keeping the spoke geometry and exposed hardware as the focal points. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eFitment Details at -76mm Offset\u003c\/p\u003e\u003cp\u003eAt 22 inches in diameter and 14 inches wide with a -76mm offset, the Phantom is built for lifted truck fitment where the mounting surface sits well rearward of the wheel's centerline, pushing the face and barrel outward for maximum stance. The 4.51 inches of backspacing reflects how far inboard the mounting surface sits, and the 10.49 inches of front spacing shows how much of the barrel extends outward. This is an aggressive combination that works best on trucks running a lift kit with the clearance to support it. The Hostile Forged HF15 Phantom is also offered in additional sizes, widths, and finishes across the lineup for builds with different fitment targets.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-76 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.51\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eGloss Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eForged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e45 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Hostile","offers":[{"title":"Default Title","offer_id":68713047261465,"sku":"HF15-2214655045GB","price":948.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/hf15_glossblack_6lug_white__14916.jpg?v=1794772619"},{"product_id":"17x9-gloss-black-wheel-rapture-h601-8x6-5-0-h601-1790816550ga","title":"Rapture H601 Gloss Black | 17x9 | 8x6.5 0mm Offset | H601-1790816550GA","description":"\u003cp\u003eHeavy-Duty Platforms, Bold Presence\u003c\/p\u003e\u003cp\u003eRam 2500 owners from 2011 through 2027 get a wheel sized and drilled for their platform right out of the box. The Hostile Rapture H601 also fits Dodge Ram 2500 (1994-2010), Chevrolet Silverado 2500 HD (2001-2010), GMC Sierra 2500 HD (2001-2010), and Dodge Ram 1500 (2006-2008), with 10 additional verified fits across 99 total verified applications. The 8x165.1 (8x6.5) bolt pattern is the heavy-duty standard for these platforms, and the 125.20mm hub bore fits them squarely.\u003c\/p\u003e\u003cp\u003eSplit Eight-Spoke Design\u003c\/p\u003e\u003cp\u003eThe Rapture carries Hostile's signature aggressive character through a split eight-spoke layout that opens up the face with visual depth and a bold, layered profile. Each pair of spokes fans outward from the hub, giving the wheel a dynamic look that suits the scale of a heavy-duty truck build. Exposed lug hardware sits in a circle around the hub bore, visible on the face and adding a purposeful, hardware-forward detail to the overall look. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eThe Rapture is cast in one-piece alloy, a construction that supports the complex split-spoke geometry and deep face profile without compromise. Cast alloy handles the intricate spoke shaping and outer lip in a single continuous form, keeping the design structurally sound through the load demands of HD truck use. The 3,640-lb load rating reflects the wheel's capacity for the payload and towing realities of 2500-series platforms. At 28.7 lbs per wheel, the Rapture carries its size without excess.\u003c\/p\u003e\u003cp\u003eOffset and Fitment Details\u003c\/p\u003e\u003cp\u003eAt 0mm offset, the Rapture's mounting surface sits exactly at the wheel's centerline, positioning the barrel evenly between the inner and outer edges. On a 9-inch-wide wheel, that centered mount places the face in a balanced, upright stance relative to the fender. Backspacing measures 5 inches. This is a wheel sized for trucks that already carry presence, and the Rapture's proportions match that intent. The Hostile lineup is also offered in additional sizes, widths, finishes, and bolt patterns for builds with different fitment needs.\u003c\/p\u003e\u003cp\u003eGloss Black Finish\u003c\/p\u003e\u003cp\u003eThe Gloss Black finish delivers a clean, high-contrast look that holds up against the visual scale of a lifted heavy-duty truck. Gloss black is a versatile choice that pairs with body color, trim accents, and hardware across a wide range of build directions without demanding a specific color scheme.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e8x165.1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e125.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eGloss Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e3640 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e32.2 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Hostile","offers":[{"title":"Default Title","offer_id":68713047458073,"sku":"H601-1790816550GA","price":332.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/rapture_glossblack_white__19596.jpg?v=1794772620"},{"product_id":"18x9-satin-black-wheel-h129-8x6-5-12-h129-1890816555a","title":"H129 Mojave Satin Black | 18x9 | 8x6.5 +12mm Offset | H129-1890816555A","description":"\u003cp\u003eHeavy-Duty Bolt Pattern, Bold Hostile Character\u003c\/p\u003e\u003cp\u003eRam 2500 and 3500 owners, Silverado 2500 HD and Sierra 2500 HD drivers, and the broader 8x165.1 (8x6.5) heavy-duty truck community get a wheel that matches the scale of the platform. The Hostile Mojave fits Ram 2500 models from 1994 through current production (2027), Chevrolet Silverado 2500 HD and GMC Sierra 2500 HD from 2001 to 2010, and Dodge Ram 1500 from 2006 to 2008, with 10 additional verified platforms rounding out a 99-application fitment universe. The 125.2mm hub bore fits these heavy-duty platforms, and the 3,700-lb load rating is built for the payload and towing demands that come with running a work-capable truck.\u003c\/p\u003e\u003cp\u003eSimulated Beadlock, Exposed Hardware, Concave Face\u003c\/p\u003e\u003cp\u003eThe Mojave's face is where Hostile's design language comes through clearly. A multi-spoke split-spoke layout with a concave profile gives the face depth and visual aggression, while the simulated beadlock ring around the perimeter adds the rugged, off-road-ready character the brand is known for. Rivets accent the beadlock ring, reinforcing the bold aesthetic. Lug hardware sits exposed around the hub bore, visible on the face and adding to the purposeful, hardware-forward look. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eThe Mojave is cast in one-piece alloy, a construction that supports the complex face geometry, deep concave profile, and simulated beadlock detail in a single continuous form. Cast alloy has earned its place as the most widely used construction in aftermarket wheel manufacturing for good reason: it delivers proven structural integrity and long-haul value at a price point that makes sense for a daily-driven or work-truck build. At 31.31 lbs, this wheel comes in under the typical weight for an 18-inch alloy truck wheel in this class.\u003c\/p\u003e\u003cp\u003eFitment Details for the 8-Lug Platform\u003c\/p\u003e\u003cp\u003eAt 18x9 with a +12mm offset, the mounting surface sits slightly forward of the wheel's centerline, keeping the wheel positioned close to the factory track width. The 5.47 inches of backspacing works within the tight clearance tolerances of heavy-duty truck suspension geometry. This is a wheel sized and offset for trucks running a lift kit, where the combination of the concave face and simulated beadlock ring looks most at home. The Mojave is also offered in additional sizes and finishes across the Hostile lineup for builds with different fitment targets.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e8x165.1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5.47\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e125.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSatin Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e3700 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e37.26 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Hostile","offers":[{"title":"Default Title","offer_id":68713047556377,"sku":"H129-1890816555A","price":456.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/h129_satinblack_8lug_white__21974.jpg?v=1794772620"},{"product_id":"18x9-bronze-black-wheel-crawler-h138-5x5-0-h138-1890512750z","title":"Crawler H138 Bronze Black | 18x9 | 5x5 0mm Offset | H138-1890512750Z","description":"\u003cp\u003eBuilt for the 5x127 Platform\u003c\/p\u003e\u003cp\u003eJeep Wrangler owners (2007-2026) and Jeep Grand Cherokee drivers (1999-2026) are the natural home for the Hostile Crawler H138. The 5x127 (5x5) bolt pattern also fits Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), with 10 additional verified platforms rounding out the fitment universe. The 78.10mm hub bore fits these 5x127 applications, and the 2,600-lb load rating supports the demands of truck and SUV builds running this platform.\u003c\/p\u003e\u003cp\u003eTen-Spoke Concave Design with Exposed Hardware\u003c\/p\u003e\u003cp\u003eThe Crawler's face runs ten spokes in a concave profile, pulling the center of the wheel back to create visual depth that suits the aggressive character Hostile is known for. Lug hardware sits exposed around the hub bore at the center of the face, adding a raw, mechanical look that keeps the design honest. The black lip frames the outer edge of the wheel, contrasting sharply against the bronze face to give the Crawler a two-tone presence that stands out on lifted Jeep and truck builds. A center cap (HC-5010SG) is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eThe Crawler is cast in one-piece alloy, a construction that supports the complex concave spoke geometry and deep profile this design demands. Cast alloy molds carry the spoke contours, concave depth, and outer lip in a single continuous shape, keeping the structural integrity intact through every load cycle. At 33 lbs, the wheel is well within the typical range for this size and construction, making it a practical choice for daily-driven Jeeps and trucks that see real use.\u003c\/p\u003e\u003cp\u003eOffset and Fitment Details\u003c\/p\u003e\u003cp\u003eAt 0mm offset on a 9-inch-wide wheel, the mounting surface sits exactly at the wheel's centerline. This neutral offset positions the wheel evenly within the fender arch, giving builds a balanced, planted stance without pushing aggressively outboard or tucking inward. Backspacing measures 5 inches. This combination suits Jeep Wrangler and Grand Cherokee builds running a lift kit, where the neutral offset and 18-inch diameter work well with the added clearance. The Hostile Crawler is also offered in additional sizes, widths, and finishes across the lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e78.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBronze Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e37.5 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Hostile","offers":[{"title":"Default Title","offer_id":68713047621913,"sku":"H138-1890512750Z","price":358.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/crawler_bronzeblack_56lug_white__82012.jpg?v=1794772620"},{"product_id":"22x14-polished-wheel-hf15-phantom-6x5-5-76-hf15-2214655045p","title":"HF15 Phantom Polished | 22x14 | 6x5.5 -76mm Offset | HF15-2214655045P","description":"\u003cp\u003eForged Aluminum Built for Aggressive Truck Fitment\u003c\/p\u003e\u003cp\u003eThe Hostile Forged HF15 Phantom brings the brand's aggressive design DNA to a one-piece forged aluminum construction. At 22 inches in diameter and 14 inches wide with a -76mm offset, the mounting surface sits deep behind the wheel's centerline, pushing the wheel outward for a dramatically wide, outboard stance. This is a genuinely aggressive fitment combination: 14 inches of width paired with -76mm of offset qualifies as one of the most outboard setups available for full-size truck platforms. The 2,600-lb load rating supports the demands of full-size truck builds, and the 106.10mm hub bore fits the 6x139.7 (6x5.5) platforms this wheel was built for.\u003c\/p\u003e\u003cp\u003eSplit Eight-Spoke Design with Polished Finish\u003c\/p\u003e\u003cp\u003eThe Phantom's face runs eight split spokes that radiate outward from the hub, each pair branching from a shared root to create visual depth and a layered profile. Exposed lug hardware sits in a circle around the hub bore, visible on the face and adding a purposeful, hardware-forward look to the center of the wheel. The full polished finish covers the entire wheel in a bright, mirror-like surface that holds its presence across the face, spokes, and outer lip. A center cap is included.\u003c\/p\u003e\u003cp\u003eOne-Piece Forged Construction\u003c\/p\u003e\u003cp\u003eHostile Forged builds the Phantom as a one-piece forged wheel, pressing solid aluminum billet under extreme force to refine the grain structure throughout the disc. The result is a dense, strong wheel that carries the split-spoke geometry and deep barrel in a single continuous form. At 45 lbs, the Phantom comes in below the typical weight range for forged wheels of this size and construction class, a meaningful advantage when you're running 22x14 hardware on a full-size truck.\u003c\/p\u003e\u003cp\u003eFitment for 6x139.7 Truck Platforms\u003c\/p\u003e\u003cp\u003eChevrolet Silverado 1500 owners (1999-2026) and GMC Sierra 1500 owners (2000-2026) are the natural home for this wheel, along with Toyota Tacoma (1995-2026), Toyota Tundra (2000-2026), and Chevrolet K1500 (1988-1999) builds. The 6x139.7 (6x5.5) bolt pattern covers 114 verified fits in total, with 10 additional verified platforms beyond those listed. The 4.51 inches of backspacing and -76mm offset are built for lifted truck setups where the fender arch has the clearance to accommodate the outboard wheel position this size demands. The Phantom is also offered in additional sizes, widths, finishes, and bolt patterns across the Hostile Forged lineup for builds with different fitment targets.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-76 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.51\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePolished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eForged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e45 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Hostile","offers":[{"title":"Default Title","offer_id":68713047654681,"sku":"HF15-2214655045P","price":1076.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/hf15_polished_6lug_white__61425.jpg?v=1794772620"},{"product_id":"18x9-gloss-black-wheel-rapture-h601-8x6-5-12-h601-1890816555ga","title":"Rapture H601 Gloss Black | 18x9 | 8x6.5 +12mm Offset | H601-1890816555GA","description":"\u003cp\u003eHeavy-Duty Platforms, Bold Presence\u003c\/p\u003e\u003cp\u003eRam 2500 and 3500 owners, Silverado 2500 HD and Sierra 2500 HD drivers, and the full range of 8x165.1 (8x6.5) heavy-duty truck platforms have a wheel built for their scale in the Hostile Rapture H601. Verified fitment covers the Ram 2500 from 1994 through 2027, the Dodge Ram 1500 (2006-2008), the Chevrolet Silverado 2500 HD and GMC Sierra 2500 HD (2001-2010), and 10 additional verified platforms across 99 total fitments. The 125.2mm hub bore fits these HD applications, and the 3,640-lb load rating is sized for the payload and towing demands that come with heavy-duty truck ownership.\u003c\/p\u003e\u003cp\u003eSplit Eight-Spoke Design\u003c\/p\u003e\u003cp\u003eThe Rapture carries Hostile's signature aggressive character through a split eight-spoke layout that opens up the face with visual depth and a purposeful, hard-edged look. Each pair of spokes fans outward from the hub, giving the wheel a wide, planted appearance that suits the scale of a full-size HD truck. Exposed lug hardware sits in a circle around the hub bore, visible on the face and adding a raw, hardware-forward detail that fits the Hostile aesthetic. A center cap is included with this wheel. The outer lip adds further dimension to the profile, and the gloss black finish ties the whole design together with a clean, high-contrast look that holds up against brake dust and road grime.\u003c\/p\u003e\u003cp\u003eOne-Piece Cast Alloy Construction\u003c\/p\u003e\u003cp\u003eThe Rapture is built as a one-piece cast alloy wheel, a construction that supports the complex split-spoke geometry and deep face profile in a single continuous shape. Cast alloy has earned its place as the most widely used construction in aftermarket wheel manufacturing for good reason: it delivers proven structural integrity and reliable long-haul value, with the mold flexibility to carry intricate spoke profiles and contoured lips without compromise. At 30.2 lbs, the Rapture is a solid, capable wheel for the HD truck applications it was built to serve.\u003c\/p\u003e\u003cp\u003eFitment Details for the 8x165.1 Pattern\u003c\/p\u003e\u003cp\u003eAt 18x9 with a +12mm offset, the mounting surface sits just forward of the wheel's centerline, keeping the wheel positioned close to the hub for a stance that works well across stock, leveled, and lifted HD truck setups. The 5.47 inches of backspacing reflects that near-center mounting position. This is a wheel sized and offset for the heavy-duty truck world, where the 8x165.1 (8x6.5) bolt pattern is the standard across Ram HD and older GM HD platforms. The Rapture is also offered in additional sizes, widths, finishes, and bolt patterns across the Hostile lineup for builds with different fitment needs.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e8x165.1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5.47\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e125.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eGloss Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e3640 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e34.7 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Hostile","offers":[{"title":"Default Title","offer_id":68713047884057,"sku":"H601-1890816555GA","price":358.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/rapture_glossblack_white__83516.jpg?v=1794772621"},{"product_id":"20x9-satin-black-wheel-h129-8x6-5-12-h129-2090816555a","title":"H129 Mojave Satin Black | 20x9 | 8x6.5 +12mm Offset | H129-2090816555A","description":"\u003cp\u003eHeavy-Duty Bolt Pattern, Bold Hostile Character\u003c\/p\u003e\u003cp\u003eThe Ram 2500 and 3500, Chevrolet Silverado 2500 HD, and GMC Sierra 2500 HD are the natural home for the Hostile Mojave. The 8x165.1 (8x6.5) bolt pattern covers these heavy-duty platforms across a wide verified fitment range, including Ram 2500 from 1994 through 2027, Silverado 2500 HD and Sierra 2500 HD from 2001 to 2010, and Dodge Ram 1500 from 2006 to 2008, with 10 additional verified platforms beyond those. The 125.20mm hub bore fits these HD applications, and the 3,700-lb load rating is built for the payload and towing demands that come with running a heavy-duty truck.\u003c\/p\u003e\u003cp\u003eSimulated Beadlock, Exposed Hardware, Concave Face\u003c\/p\u003e\u003cp\u003eThe Mojave carries Hostile's unmistakable off-road identity in every design detail. A simulated beadlock ring wraps the outer edge, giving the wheel the rugged, trail-ready look associated with purpose-built off-road builds without the complexity of a functional locking ring. Rivets accent the beadlock ring, adding visual weight and texture that reinforces the aggressive character. The concave face draws the eye inward, creating depth across the multi-spoke layout, while exposed lug hardware sits visible around the hub bore, adding to the raw, hardware-forward aesthetic. The satin black finish ties it all together: low-sheen, durable, and suited to the working character of a heavy-duty truck.\u003c\/p\u003e\u003cp\u003eOne-Piece Cast Alloy Construction\u003c\/p\u003e\u003cp\u003eThe Mojave is cast in one-piece alloy, a construction method that supports the complex geometry this design demands. The concave face, simulated beadlock ring, and multi-spoke layout are all formed in a single continuous pour, keeping the design's structural depth intact. Cast alloy has earned its place as the most widely used construction in aftermarket wheel manufacturing for good reason: it delivers proven strength and reliable long-haul value, and it handles the intricate shapes that define wheels like this one. At 37 lbs, the Mojave comes in below the typical weight for a 20-inch alloy truck wheel in this class.\u003c\/p\u003e\u003cp\u003eFitment Details for the Build\u003c\/p\u003e\u003cp\u003eAt 20x9 with a +12mm offset, the mounting surface sits slightly forward of the wheel's centerline, keeping the wheel positioned close to the factory track width. The 5.47 inches of backspacing works within the fender geometry of these HD platforms, making this a practical choice for trucks running stock height or a lift kit. A center cap is included with this wheel. The Hostile Mojave is also offered in additional sizes, widths, finishes, and bolt patterns across the lineup, covering both 6-lug and 8-lug applications for a range of truck builds.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e8x165.1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5.47\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e125.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSatin Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e3700 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e37 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Hostile","offers":[{"title":"Default Title","offer_id":68713048047897,"sku":"H129-2090816555A","price":507.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/h129_satinblack_8lug_white__18346.jpg?v=1794772622"},{"product_id":"24x12-gloss-black-wheel-hf15-phantom-6x5-5-44-hf15-2412655047gb","title":"HF15 Phantom Gloss Black | 24x12 | 6x5.5 -44mm Offset | HF15-2412655047GB","description":"\u003cp\u003eBuilt for the 6x139.7 Platform\u003c\/p\u003e\u003cp\u003eThe Hostile Forged HF15 Phantom is a 24x12 forged wheel drilled for the 6x139.7 (6x5.5) bolt pattern, covering a wide range of full-size GM and Toyota truck platforms. Verified fitment includes the Chevrolet Silverado 1500 (1999-2026), GMC Sierra 1500 (2000-2026), Toyota Tundra (2000-2026), Toyota Tacoma (1995-2026), and Chevrolet K1500 (1988-1999), with 10 additional verified platforms in the fitment universe. The 106.10mm hub bore fits these 6x139.7 applications, and the 2,600-lb load rating supports full-size truck demands. Backspacing measures 4.77 inches.\u003c\/p\u003e\u003cp\u003eSplit Eight-Spoke Design with Exposed Lugs\u003c\/p\u003e\u003cp\u003eThe Phantom carries a split eight-spoke face that gives the wheel visual depth and an aggressive, layered profile. Each pair of spokes fans outward from the hub, creating an open, structured look that suits the scale of a 24-inch diameter. Lug hardware sits exposed around the hub bore, visible on the face and adding a purposeful, hardware-forward detail to the overall presentation. A center cap is included with this wheel. The gloss black finish is clean and consistent across the face, holding its appearance through daily driving and seasonal exposure without demanding extra upkeep.\u003c\/p\u003e\u003cp\u003eForged Construction, Hostile Forged DNA\u003c\/p\u003e\u003cp\u003eHostile Forged brings the same aggressive design language as the Hostile lineup but builds it in custom forged aluminum. The Phantom is a one-piece forged wheel: solid aluminum billet pressed under extreme force, refining the grain structure for density and strength throughout the disc. At 51 lbs in a 24x12 format, the forged construction delivers the structural integrity this size calls for while keeping the wheel within a practical weight range for full-size truck builds. This is Hostile's premium tier, and the Phantom reflects that with forged-level craftsmanship behind the aggressive proportions.\u003c\/p\u003e\u003cp\u003eOffset and Stance at 24x12\u003c\/p\u003e\u003cp\u003eThe Silverado 1500 and Sierra 1500 are natural homes for the Phantom's 24x12 proportions, where the wheel's scale and outboard positioning suit lifted builds running the 6x139.7 pattern. At -44mm, the mounting surface sits well rearward of the wheel's centerline, pushing the wheel outward for a wide, aggressive stance with significant poke beyond the fender line. This is a notably aggressive offset for a 12-inch-wide wheel, and it is built for lifted truck setups where fender clearance supports the outboard wheel position. The Phantom is also offered in additional sizes, widths, and finishes across the Hostile Forged lineup for builds with different fitment targets.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-44 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.77\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eGloss Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eForged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e51 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Hostile","offers":[{"title":"Default Title","offer_id":68713047949593,"sku":"HF15-2412655047GB","price":1000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/hf15_glossblack_6lug_white__09498.jpg?v=1794772621"},{"product_id":"18x9-machined-wheel-crawler-h138-5x5-0-h138-1890512750m","title":"Crawler H138 Machined | 18x9 | 5x5 0mm Offset | H138-1890512750M","description":"\u003cp\u003eBuilt for the 5x127 Platform\u003c\/p\u003e\u003cp\u003eJeep Wrangler owners (2007-2026) and Jeep Grand Cherokee drivers (1999-2026) are the natural home for the Hostile Crawler H138, and the 5x127 (5x5) bolt pattern confirms it. The 78.10mm hub bore fits these platforms, and the 2,600-lb load rating supports the demands of trail-ready and street-driven builds alike. Fitment extends to Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), with 10 additional verified platforms rounding out the 5x127 universe.\u003c\/p\u003e\u003cp\u003eTen-Spoke Concave Face, Machined Finish\u003c\/p\u003e\u003cp\u003eThe Crawler's ten-spoke layout fans outward from the hub in a concave profile, giving the face visual depth that flat designs simply don't carry. The machined finish cuts through the alloy surface to expose the bright aluminum underneath, producing a high-contrast look that holds its character across different lighting conditions. Exposed lug hardware sits in a circle around the hub bore at the center of the face, adding a purposeful, hardware-forward detail that fits Hostile's no-apologies design language. A center cap is included with this wheel. The outer lip frames the barrel and adds to the overall depth of the profile, a detail that stands out on lifted Wrangler and Grand Cherokee builds.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eThe Crawler is cast in one-piece alloy, a construction that supports the complex concave spoke geometry and deep barrel profile without compromise. Cast alloy molds support the undercuts and contoured transitions that give the Crawler its aggressive depth, and the one-piece structure keeps the wheel's integrity intact through repeated load cycles. At 33 lbs, the weight is consistent with what this size and construction deliver. The 5-inch backspacing pairs with the 0mm offset, placing the mounting surface exactly at the wheel's centerline for a neutral, balanced stance.\u003c\/p\u003e\u003cp\u003eOffset and Stance Details\u003c\/p\u003e\u003cp\u003eAt 0mm offset, the mounting surface sits at the wheel's centerline, positioning the wheel evenly between the inner and outer edges of the barrel. On Wrangler and Grand Cherokee platforms, this placement works well with leveling kits and moderate lift setups, keeping the wheel positioned squarely in the fender arch without excessive inboard or outboard bias. The 18x9 size gives the Crawler a presence that suits the scale of full-size Jeep platforms without requiring extreme clearance modifications.\u003c\/p\u003e\u003cp\u003eHostile Crawler Across the Lineup\u003c\/p\u003e\u003cp\u003eThe Crawler is also offered in additional sizes, widths, offsets, and finish options, covering both 6-lug and 8-lug bolt patterns for a wider range of truck and SUV platforms. If this 18x9 machined version fits your build, the rest of the Crawler lineup is worth exploring for other configurations.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e78.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eMachined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e37.5 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Hostile","offers":[{"title":"Default Title","offer_id":68713048015129,"sku":"H138-1890512750M","price":358.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/crawler_machined_56lug_white__25995.jpg?v=1794772622"},{"product_id":"18x9-silver-machined-wheel-rapture-h601-8x6-5-12-h601-1890816555m","title":"Rapture H601 Silver Machined | 18x9 | 8x6.5 +12mm Offset | H601-1890816555M","description":"\u003cp\u003eHeavy-Duty Bolt Pattern, Built for HD Trucks\u003c\/p\u003e\u003cp\u003eThe 8x165.1 (8x6.5) bolt pattern is the calling card of heavy-duty American trucks, and the Hostile Rapture H601 is sized and drilled to match. Verified fitment covers Ram 2500 (2011-2027), Dodge Ram 2500 (1994-2010), Chevrolet Silverado 2500 HD (2001-2010), GMC Sierra 2500 HD (2001-2010), and Dodge Ram 1500 (2006-2008), with 10 additional verified platforms across 99 total fitments. The 125.20mm hub bore fits these HD platforms, and the 3,640-lb load rating is built to handle the payload and towing demands that come with running a heavy-duty truck.\u003c\/p\u003e\u003cp\u003eSplit Eight-Spoke Design with Exposed Hardware\u003c\/p\u003e\u003cp\u003eThe Rapture carries Hostile's signature bold attitude in an 18-inch format. Eight split spokes radiate from the hub in a clean, symmetrical pattern that gives the face visual depth without overcomplicating the design. Lug hardware sits exposed around the hub bore, visible on the face and adding an industrial edge to the overall look. A center cap is included with this wheel. The outer lip adds profile to the barrel, and the non-directional layout means mounting orientation is straightforward across all four corners.\u003c\/p\u003e\u003cp\u003eGloss Silver Finish with Machined Spoke Faces\u003c\/p\u003e\u003cp\u003eThe finish is a gloss silver base with the spoke faces machined to a brighter, contrasting sheen. That two-tone result gives the Rapture a sharp, detailed look that suits the scale of a full-size HD truck without going full chrome. The machined surfaces bring out the geometry of the split spokes, making the face look more dimensional in natural light. At 30.2 lbs, this one-piece alloy wheel carries the structural integrity the Rapture's design demands across the full load range.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eThe Rapture is cast as a single piece in alloy aluminum, a construction that supports the complex split-spoke geometry and deep spoke profile in one continuous shape. Cast alloy has earned its place as the backbone of aftermarket wheel manufacturing: it handles intricate face designs reliably, delivers proven long-haul strength, and brings the value that makes it the right call for a working HD truck that sees real use. The one-piece structure keeps the wheel's geometry intact through every load cycle without the complexity of multi-piece assembly.\u003c\/p\u003e\u003cp\u003eFitment Details for the HD Platform\u003c\/p\u003e\u003cp\u003eAt 18x9 with a +12mm offset, the mounting surface sits just forward of the wheel's centerline, keeping the wheel positioned close to the factory track width. That placement suits HD trucks where clearance around the inner fender and suspension components is a real consideration. The 5.47 inches of backspacing reflects that inboard-leaning position. This wheel is also offered in additional sizes, widths, and finishes across the Rapture lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e8x165.1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5.47\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e125.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSilver Machined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e3640 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e34.7 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Hostile","offers":[{"title":"Default Title","offer_id":68713048178969,"sku":"H601-1890816555M","price":358.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/rapture_silvermachined_white__68997.jpg?v=1794772622"},{"product_id":"24x12-polished-wheel-hf15-phantom-6x5-5-44-hf15-2412655047p","title":"HF15 Phantom Polished | 24x12 | 6x5.5 -44mm Offset | HF15-2412655047P","description":"\u003cp\u003eForged Aluminum Built for Presence\u003c\/p\u003e\u003cp\u003eThe Hostile Forged HF15 Phantom is the premium forged expression of Hostile's aggressive design DNA, built as a one-piece forged aluminum wheel in a 24x12 size with a -44mm offset. Forging starts with a solid aluminum billet pressed under extreme force, refining the grain structure for density and strength that cast construction cannot replicate at this scale. At 24 inches in diameter and 12 inches wide, this is a show-stopping wheel that commands attention, and the forged construction backs that presence with the structural integrity to match. The 2,600-lb load rating supports full-size truck payloads, and the 51-lb weight reflects what forged aluminum delivers at this size.\u003c\/p\u003e\u003cp\u003eSplit Eight-Spoke Design, Polished Finish\u003c\/p\u003e\u003cp\u003eThe Phantom's face runs a split eight-spoke layout, with each pair of spokes branching outward from the hub in a clean, symmetrical pattern that gives the wheel visual depth and an open, airy profile. The exposed lug hardware sits in a circle around the hub bore, adding a purposeful, hardware-forward detail to the center of the face. A center cap is included with this wheel. The polished finish is a full mirror-bright aluminum surface that reflects light cleanly across every spoke and the outer lip, making this one of the most visually striking finishes available in the Hostile Forged lineup. Backspacing measures 4.77 inches.\u003c\/p\u003e\u003cp\u003eFitment for 6x139.7 (6x5.5) Truck Platforms\u003c\/p\u003e\u003cp\u003eThe Chevrolet Silverado 1500 (1999-2026) and GMC Sierra 1500 (2000-2026) are natural homes for this wheel, along with the Toyota Tacoma (1995-2026), Toyota Tundra (2000-2026), and Chevrolet K1500 (1988-1999), covering 114 verified fitments across the 6x139.7 (6x5.5) bolt pattern. The 106.10mm hub bore fits these platforms. At -44mm, the mounting surface sits well rearward of the wheel's centerline, pushing the face outward for an aggressive, wide-stance look that suits lifted truck builds where fender clearance opens up the room this size needs.\u003c\/p\u003e\u003cp\u003eA Wheel Built to Be Seen\u003c\/p\u003e\u003cp\u003eAt 24 inches, the Phantom is a show-oriented wheel that makes its presence known at truck meets, SEMA-style builds, and anywhere aggressive fitment is the point. The polished finish and split-spoke geometry work together to create a wheel that looks intentional from every angle. The Hostile Forged lineup is also offered in additional sizes, widths, and finishes across both 6-lug and 8-lug bolt patterns for builds with different fitment needs.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-44 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.77\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePolished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eForged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e51 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Hostile","offers":[{"title":"Default Title","offer_id":68713048310041,"sku":"HF15-2412655047P","price":1134.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/hf15_polished_6lug_white__77103.jpg?v=1794772622"},{"product_id":"17x9-machined-wheel-crawler-h138-6x135-0-h138-1790613550m","title":"Crawler H138 Machined | 17x9 | 6x135 0mm Offset | H138-1790613550M","description":"\u003cp\u003eBuilt for Ford's 6x135 Platform\u003c\/p\u003e\u003cp\u003eFord F-150 owners (2004-2026) get a wheel sized for the platform's 6x135 bolt pattern, and the Hostile Crawler H138 fits across the full breadth of that lineup. Fitment extends to the Ford Expedition (2003-2027), Lincoln Navigator (2003-2027), Ford F-150 Lightning (2022-2026), and Ford Bronco (2022-2026), plus one additional verified platform. The 87mm hub bore fits these Ford and Lincoln applications, and the 2,600-lb load rating supports the payload demands of full-size truck and SUV builds.\u003c\/p\u003e\u003cp\u003eTen-Spoke Concave Design with Exposed Hardware\u003c\/p\u003e\u003cp\u003eThe Crawler runs ten spokes in a concave profile, giving the face visual depth that flat designs simply don't carry. Each spoke draws inward toward the hub, creating a layered look that suits the aggressive character Hostile is known for. Lug hardware sits exposed around the hub bore, visible on the face in a circle where the wheel mounts to the vehicle. That hardware-forward detail is a deliberate part of the design, not an afterthought. A center cap (HC-6008C) is included, covering the hub area when you want a cleaner look. The outer lip adds further dimension to the profile, framing the concave face from the outside.\u003c\/p\u003e\u003cp\u003eMachined Alloy Construction\u003c\/p\u003e\u003cp\u003eThe Crawler is cast in one-piece alloy, a construction that supports the complex concave spoke geometry and deep face profile without compromise. Cast molds handle the undercuts and contoured surfaces that define this design, and the machined finish is applied directly to the alloy surface to bring out the natural brightness of the metal. At 26 lbs, the wheel carries a weight that suits daily-driven and lifted Ford truck builds alike. The machined finish delivers a bright, metallic appearance with the raw texture of the alloy visible where the cutting tool has worked across the face.\u003c\/p\u003e\u003cp\u003eOffset and Stance Details\u003c\/p\u003e\u003cp\u003eAt 0mm offset, the mounting surface sits exactly at the wheel's centerline, positioning the barrel evenly split between inboard and outboard. On a 9-inch-wide wheel, that neutral offset places the face outboard enough to fill the fender arch with presence without pushing into aggressive poke territory. Backspacing measures 5 inches. This is a wheel sized and positioned for lifted Ford truck builds where the stance is intentional and the fitment is repeatable across thousands of similar setups.\u003c\/p\u003e\u003cp\u003eAdditional Configurations Available\u003c\/p\u003e\u003cp\u003eThe Crawler is offered in additional sizes, widths, and finishes beyond this 17x9 Machined version, including both 6-lug and other bolt-pattern options across the lineup.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x135\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eMachined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e26 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Hostile","offers":[{"title":"Default Title","offer_id":68713048408345,"sku":"H138-1790613550M","price":332.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/crawler_machined_56lug_white__51438.jpg?v=1794772623"},{"product_id":"17x9-satin-black-wheel-h130-5x5-12-h130-1790512745a","title":"H130 Crandon Satin Black | 17x9 | 5x5 -12mm Offset | H130-1790512745A","description":"\u003cp\u003eBuilt for Jeep and Truck Platforms on 5x127\u003c\/p\u003e\u003cp\u003eJeep Wrangler owners (2007-2026) will find the Hostile Crandon sized and offset for the platform's wide fender arches and lifted builds. The 5x127 (5x5) bolt pattern also covers the Jeep Grand Cherokee (1999-2026), Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), with 10 additional verified platforms in the fitment universe. The 78.10mm hub bore fits these applications, and the 2,600-lb load rating supports the demands of loaded and lifted truck and SUV builds.\u003c\/p\u003e\u003cp\u003eSplit Five-Spoke Design with Simulated Beadlock\u003c\/p\u003e\u003cp\u003eThe Crandon runs a split five-spoke face with a concave profile that draws the eye inward toward the hub. Rivets ring the outer barrel, giving the wheel the visual character of a beadlock ring without the added complexity of a functional locking system. The simulated beadlock treatment is a defining element of the Crandon's look, and it suits the aggressive, trail-ready aesthetic Hostile is known for. Lug hardware sits behind the included center cap, keeping the face clean and the spoke geometry uninterrupted.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eThe Crandon is cast in one-piece alloy, a construction that supports the deep concave spoke profile and the contoured outer barrel in a single continuous shape. Cast alloy carries complex geometry well, holding the spoke depth and the simulated beadlock detail without the assembly complexity of a multi-piece build. At 29.54 lbs, the Crandon comes in at a competitive weight for its construction class. Backspacing measures 4.53 inches.\u003c\/p\u003e\u003cp\u003eOffset and Stance on 5x127 Builds\u003c\/p\u003e\u003cp\u003eThe Wrangler JK and JL are the natural home for this wheel. At 17x9 with a -12mm offset, the mounting surface sits slightly rearward of the wheel's centerline, pushing the face outward for a more planted, assertive stance than a neutral or positive offset delivers. On a Wrangler running a lift kit, this offset works with the wider track to fill the fender arch with presence. The Crandon is also offered in additional sizes, widths, and finishes across the Hostile lineup for builds that need a different fit.\u003c\/p\u003e\u003cp\u003eSatin Black Finish\u003c\/p\u003e\u003cp\u003eThe satin black finish gives the Crandon a low-sheen, matte-adjacent surface that holds its look through trail dust, road film, and seasonal exposure. Satin black suits the Crandon's aggressive off-road character and pairs naturally with the dark rivet detail around the barrel. A center cap is included with this wheel.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.53\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e78.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSatin Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e35.05 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Hostile","offers":[{"title":"Default Title","offer_id":68713048473881,"sku":"H130-1790512745A","price":416.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/h130_satinblack_5lug_white__62389.jpg?v=1794772623"},{"product_id":"20x9-gloss-black-wheel-rapture-h601-8x6-5-1-h601-2090816550ga","title":"Rapture H601 Gloss Black | 20x9 | 8x6.5 +1mm Offset | H601-2090816550GA","description":"\u003cp\u003eHeavy-Duty Bolt Pattern, Bold Hostile Presence\u003c\/p\u003e\u003cp\u003eThe Ram 2500, Silverado 2500 HD, and Sierra 2500 HD are the natural home for the Hostile Rapture H601. This 8x165.1 (8x6.5) bolt pattern covers the heavy-duty truck universe: Ram 2500 (2011-2027), Dodge Ram 2500 (1994-2010), Chevrolet Silverado 2500 HD (2001-2010), GMC Sierra 2500 HD (2001-2010), and the Dodge Ram 1500 (2006-2008), with 10 additional verified platforms across 99 total fitments. The 125.2mm hub bore fits these HD platforms, and the 3,640-lb load rating is built for the payload and towing demands that come with running a heavy-duty truck.\u003c\/p\u003e\u003cp\u003eSplit Eight-Spoke Design\u003c\/p\u003e\u003cp\u003eThe Rapture carries Hostile's signature aggression through a split eight-spoke layout that opens up the face with visual depth and motion. Eight split spokes radiate from the hub outward, giving the wheel a layered, dimensional look that suits the scale of a full-size HD truck. Lug hardware sits exposed around the hub bore, visible on the face and adding a purposeful, hardware-forward detail to the overall look. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eThe Rapture is cast in one-piece alloy, a construction that supports the deep spoke geometry and outer lip profile in a single continuous shape. Cast alloy handles complex face designs well, keeping the split-spoke structure and contoured surfaces intact through every load cycle. At 35.7 lbs, the Rapture carries the structural integrity for HD-payload applications without unnecessary bulk. The gloss black finish holds its look against brake dust, road film, and the kind of daily abuse that comes with working trucks.\u003c\/p\u003e\u003cp\u003eFitment Details for HD Platforms\u003c\/p\u003e\u003cp\u003eAt 20x9 with a +1mm offset, the mounting surface sits almost exactly at the wheel's centerline, keeping the wheel positioned close to the factory track width. The 5.04 inches of backspacing places the wheel inboard enough to work with HD suspension geometry without pushing into the inner fender. This is a measured, well-proportioned fitment for HD trucks that want a bold look without pulling the wheel dramatically outboard.\u003c\/p\u003e\u003cp\u003eThe Rapture is also offered in additional sizes, widths, and finishes across the Hostile lineup, covering both 6-lug and 8-lug bolt patterns for a range of truck platforms.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e8x165.1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5.04\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e125.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eGloss Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e3640 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e40.7 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Hostile","offers":[{"title":"Default Title","offer_id":68713048604953,"sku":"H601-2090816550GA","price":378.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/rapture_glossblack_white__24180.jpg?v=1794772623"},{"product_id":"24x14-gloss-black-wheel-hf15-phantom-6x5-5-76-hf15-2414655045gb","title":"HF15 Phantom Gloss Black | 24x14 | 6x5.5 -76mm Offset | HF15-2414655045GB","description":"\u003cp\u003eBuilt for the 6x139.7 Platform\u003c\/p\u003e\u003cp\u003eThe Hostile Forged HF15 Phantom is a 24x14 forged wheel drilled for the 6x139.7 (6x5.5) bolt pattern, covering a wide range of full-size truck and mid-size truck platforms. Verified fitment includes the Chevrolet Silverado 1500 (1999-2026), GMC Sierra 1500 (2000-2026), Toyota Tundra (2000-2026), Toyota Tacoma (1995-2026), and Chevrolet K1500 (1988-1999), with 10 additional verified platforms across 114 total fitments. The 106.10mm hub bore fits these 6x139.7 applications, and the 2,600-lb load rating supports full-size truck demands.\u003c\/p\u003e\u003cp\u003eForged Aluminum, Hostile DNA\u003c\/p\u003e\u003cp\u003eHostile Forged brings the brand's aggressive design language into custom forged aluminum, and the Phantom is a direct expression of that. A solid aluminum billet is pressed under extreme force, refining the grain structure throughout the wheel for density and strength that cast construction does not replicate at this scale. At 24 inches across and 14 inches wide, the Phantom carries that forged integrity through every load cycle. The result is a wheel that weighs in at 51 lbs while holding the structural integrity the size demands.\u003c\/p\u003e\u003cp\u003eSplit Eight-Spoke Design with Exposed Hardware\u003c\/p\u003e\u003cp\u003eThe Phantom runs a split eight-spoke layout with a gloss black finish across the face. Eight spokes branch outward from the hub in pairs, giving the face an open, layered look with visual depth between each split. The lug hardware sits exposed in a circle around the hub bore, visible on the face and adding a raw, hardware-forward detail to the overall look. A center cap is included. The outer lip adds profile to the barrel, and the gloss black finish holds its character across the full face without machined or milled contrast.\u003c\/p\u003e\u003cp\u003eOffset and Stance at -76mm\u003c\/p\u003e\u003cp\u003eAt -76mm offset on a 14-inch-wide barrel, the Phantom's mounting surface sits well rearward of centerline, pushing the wheel outward for an aggressive, wide stance. This is one of the most outboard wheel positions available in a 24-inch forged wheel, and it is built specifically for lifted truck setups where fender clearance and stance width are the priority. Backspacing measures 4.51 inches. This combination is not a subtle fitment move: the outboard positioning is intentional and pronounced, suited for builds where presence is the point.\u003c\/p\u003e\u003cp\u003eAdditional Configurations Available\u003c\/p\u003e\u003cp\u003eThe Phantom is offered in additional sizes, widths, finishes, and bolt-pattern options beyond this 24x14 gloss black 6x139.7 setup, including both 6-lug and 8-lug patterns across the lineup.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-76 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.51\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eGloss Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eForged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e51 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Hostile","offers":[{"title":"Default Title","offer_id":68713048637721,"sku":"HF15-2414655045GB","price":1093.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/hf15_glossblack_6lug_white__08564.jpg?v=1794772623"},{"product_id":"17x9-satin-black-wheel-crawler-h138-6x135-0-h138-1790613550a","title":"Crawler H138 Satin Black | 17x9 | 6x135 0mm Offset | H138-1790613550A","description":"\u003cp\u003eBuilt for Ford's 6x135 Platform\u003c\/p\u003e\u003cp\u003eFord F-150 owners from 2004 through 2026 get a wheel sized and offset for trucks that mean business. The Hostile Crawler H138 also fits the Ford Expedition (2003-2027), Lincoln Navigator (2003-2027), Ford F-150 Lightning (2022-2026), and Ford Bronco (2022-2026), covering six verified 6x135 platforms in total. The 87mm hub bore fits these Ford applications, and the 2,600-lb load rating supports the payload demands of full-size truck and SUV use.\u003c\/p\u003e\u003cp\u003eTen-Spoke Concave Design, Exposed Hardware\u003c\/p\u003e\u003cp\u003eThe Crawler's ten-spoke layout fans out from the hub in a concave profile, giving the face visual depth that flat designs simply don't carry. The spokes draw the eye inward toward the hub, where the lug hardware sits fully exposed in a circle around the bore. That visible hardware is part of the design intent: no cap covering the mounting hardware, just the raw, mechanical look Hostile builds toward. A center cap is included with this wheel. The outer lip frames the barrel and adds to the wheel's overall presence on the truck.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy, Satin Black Finish\u003c\/p\u003e\u003cp\u003eThe Crawler is cast in one-piece alloy construction, a proven method that supports the complex spoke geometry and concave profile without compromise. Cast alloy handles the deep spoke shaping and contoured face in a single continuous form, keeping the structural integrity intact across the full load cycle. At 28.9 lbs, this wheel carries the reliable long-haul value that cast alloy is known for in the aftermarket. The Satin Black (Asphalt) finish gives the face a flat, non-reflective tone that suits the Crawler's aggressive character and holds up through road grime and daily use without demanding constant upkeep.\u003c\/p\u003e\u003cp\u003eOffset and Fitment Details\u003c\/p\u003e\u003cp\u003eAt 17x9 with a 0mm offset, the mounting surface sits exactly at the wheel's centerline, positioning the barrel evenly between the hub face and the outer edge. This centered mount places the wheel squarely in the fender arch without pushing aggressively outboard or tucking inward, making it a versatile fit across stock, leveled, and lifted truck setups. Backspacing measures 5 inches. The Crawler is also offered in additional sizes, widths, and finishes across the Hostile lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x135\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSatin Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e32.4 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Hostile","offers":[{"title":"Default Title","offer_id":68713048834329,"sku":"H138-1790613550A","price":332.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/crawler_satinblack_56lug_white__70507.jpg?v=1794772624"},{"product_id":"17x9-satin-black-wheel-h130-5x5-0-h130-1790512750a","title":"H130 Crandon Satin Black | 17x9 | 5x5 0mm Offset | H130-1790512750A","description":"\u003cp\u003eJeep and Truck Fitment on the 5x127 Pattern\u003c\/p\u003e\u003cp\u003eJeep Wrangler owners (2007-2026) and Jeep Grand Cherokee owners (1999-2026) are the natural home for the Hostile Crandon, a 17x9 split five-spoke wheel built around the 5x127 (5x5) bolt pattern. That same pattern also fits Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), GMC Yukon (1992-1999), and 10 additional verified platforms across 32 total fitments. The 78.10mm hub bore fits these platforms, and the 2,600-lb load rating supports the demands of loaded Jeep and truck builds.\u003c\/p\u003e\u003cp\u003eSplit Five-Spoke Design with Simulated Beadlock\u003c\/p\u003e\u003cp\u003eThe Crandon's split five-spoke face gives the wheel visual depth and an open, layered look that suits the aggressive character Hostile is known for. At 0mm offset, the mounting surface sits flush with the wheel's centerline, placing the face in a neutral position relative to the fender. The standout detail is the simulated beadlock ring that wraps the outer edge, complete with rivets around the ring's perimeter. It delivers the rugged, trail-ready look of a beadlock without the weight or complexity of a functional locking ring. The concave face profile adds further depth, pulling the spokes inward and giving the wheel a more dimensional presence. Lugs sit behind the included center cap, keeping the hub area clean.\u003c\/p\u003e\u003cp\u003eOne-Piece Cast Alloy Construction\u003c\/p\u003e\u003cp\u003eThe Crandon is cast in one-piece alloy, a construction that supports the complex geometry this design demands. The split spoke profile, concave face, and integrated simulated beadlock ring are all formed in a single continuous pour, keeping the design's structural depth intact. At 29.54 lbs, this wheel comes in at a competitive weight for its construction class. The 5-inch backspacing reflects the 0mm offset on a 9-inch-wide barrel.\u003c\/p\u003e\u003cp\u003eSatin Black Finish Built to Last\u003c\/p\u003e\u003cp\u003eThe satin black finish gives the Crandon a low-sheen, matte-adjacent look that holds up through trail dust, road film, and seasonal exposure without demanding constant upkeep. The finish runs consistently across the face, spokes, and simulated beadlock ring, tying the design together in a single cohesive tone. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eFitment Across the Lineup\u003c\/p\u003e\u003cp\u003eJeep Wrangler and Grand Cherokee builds running the 5x127 pattern get a wheel sized for real-world use: 17 inches keeps tire selection broad for off-road applications, and the 0mm offset works across stock, leveled, and lifted setups. The Crandon is also offered in additional sizes and finishes across the Hostile lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e78.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSatin Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e35.05 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Hostile","offers":[{"title":"Default Title","offer_id":68713048899865,"sku":"H130-1790512750A","price":416.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/h130_satinblack_5lug_white__50632.jpg?v=1794772624"},{"product_id":"24x14-polished-wheel-hf15-phantom-6x5-5-76-hf15-2414655045p","title":"HF15 Phantom Polished | 24x14 | 6x5.5 -76mm Offset | HF15-2414655045P","description":"\u003cp\u003eBuilt for the 6x139.7 Platform\u003c\/p\u003e\u003cp\u003eThe Hostile Forged HF15 Phantom is a 24x14 forged wheel in a full polished finish, drilled for the 6x139.7 (6x5.5) bolt pattern. That covers a wide range of full-size and mid-size truck platforms: Chevrolet Silverado 1500 (1999-2026), GMC Sierra 1500 (2000-2026), Toyota Tundra (2000-2026), Toyota Tacoma (1995-2026), and the Chevrolet K1500 (1988-1999), among 10 additional verified platforms. The 106.10mm hub bore fits these 6x139.7 applications, and the 2,600-lb load rating supports the demands of full-size truck use.\u003c\/p\u003e\u003cp\u003eAggressive Offset, Maximum Outboard Stance\u003c\/p\u003e\u003cp\u003eAt -76mm offset on a 14-inch-wide barrel, the Phantom sits as far outboard as this platform allows. The mounting surface is positioned deep behind the wheel's centerline, pushing the entire assembly outward for a wide, planted stance that commands attention on lifted builds. Backspacing measures 4.51 inches. This is one of the most aggressive offset and width combinations available for the 6x139.7 platform, and it is built specifically for trucks running substantial lift.\u003c\/p\u003e\u003cp\u003eForged Aluminum, One-Piece Construction\u003c\/p\u003e\u003cp\u003eHostile Forged brings the same aggressive design DNA as the Hostile lineup but backs it with forged aluminum construction. A solid billet is pressed under extreme force, refining the grain structure throughout the wheel for density and strength. At 51 lbs in a 24x14 size, the Phantom delivers the structural integrity that forged construction is known for in show and performance applications. One-piece construction keeps the wheel's geometry continuous from hub to barrel with no seams or assembly points.\u003c\/p\u003e\u003cp\u003eSplit Eight-Spoke Design with Polished Finish\u003c\/p\u003e\u003cp\u003eThe Phantom runs a split eight-spoke design with exposed lug hardware visible around the hub area at the center of the face. The full polished finish covers the entire wheel, giving the face and barrel a bright, mirror-like appearance that suits the scale of a 24-inch show-oriented build. At this diameter, the Phantom is built to be seen. A center cap is included.\u003c\/p\u003e\u003cp\u003eFitment Details\u003c\/p\u003e\u003cp\u003eThe Phantom is offered in additional sizes, widths, and finishes across the Hostile Forged lineup to suit a range of 6-lug and 8-lug truck builds. This 24x14 at -76mm is sized for lifted trucks where the outboard wheel position and large diameter can be fully utilized without clearance compromise.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-76 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.51\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePolished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eForged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e51 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Hostile","offers":[{"title":"Default Title","offer_id":68713048998169,"sku":"HF15-2414655045P","price":1240.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/hf15_polished_6lug_white__59139.jpg?v=1794772624"},{"product_id":"20x9-gloss-black-wheel-rapture-h601-8x6-5-12-h601-2090816555ga","title":"Rapture H601 Gloss Black | 20x9 | 8x6.5 +12mm Offset | H601-2090816555GA","description":"\u003cp\u003eHeavy-Duty Platforms, Bold Presence\u003c\/p\u003e\u003cp\u003eRam 2500 and 3500 owners, Silverado 2500 HD and Sierra 2500 HD drivers, and the full range of 8x165.1 (8x6.5) heavy-duty platforms have a wheel built specifically for their bolt pattern in the Hostile Rapture H601. Verified across 99 fitments, this 20x9 gloss black wheel covers Ram 2500 (2011-2027), Dodge Ram 2500 (1994-2010), Chevrolet Silverado 2500 HD (2001-2010), GMC Sierra 2500 HD (2001-2010), Dodge Ram 1500 (2006-2008), and 10 additional verified platforms. The 125.20mm hub bore fits these heavy-duty applications, and the 3,640-lb load rating is built to handle the payload and towing demands that come with running a serious work truck.\u003c\/p\u003e\u003cp\u003eSplit Eight-Spoke Design\u003c\/p\u003e\u003cp\u003eThe Rapture carries Hostile's signature aggressive character through a split eight-spoke design that opens up the face with visual depth and a bold, layered profile. Eight split spokes radiate outward from the hub, each dividing into a paired structure that gives the wheel a complex, multi-plane look without cluttering the face. Exposed lug hardware sits in a circle around the hub bore, visible on the face and adding a purposeful, hardware-forward detail that fits the Hostile aesthetic. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Cast Alloy Construction\u003c\/p\u003e\u003cp\u003eThe Rapture is cast in one-piece alloy construction, a proven method that supports the deep spoke geometry and layered face profile this design demands. Cast molds carry complex shapes, including the split-spoke structure and contoured outer lip, in a single continuous form. At 35.7 lbs, the Rapture delivers the structural integrity and long-haul reliability that HD truck builds require, with a 5.47-inch backspacing that suits the platform.\u003c\/p\u003e\u003cp\u003eOffset and Stance on HD Trucks\u003c\/p\u003e\u003cp\u003eThe +12mm offset places the mounting surface slightly forward of the wheel's centerline, positioning the face with a modest outboard presence that suits the wide fender arches of full-size HD trucks. At 9 inches wide with a +12mm offset, this is a truck-scaled wheel sized for a clean, planted stance rather than an extreme outboard push. The Rapture is also offered in additional sizes, widths, finishes, and bolt patterns across the lineup for builds with different fitment needs.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e8x165.1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5.47\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e125.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eGloss Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e3640 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e40.7 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Hostile","offers":[{"title":"Default Title","offer_id":68713049030937,"sku":"H601-2090816555GA","price":378.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/rapture_glossblack_white__99142.jpg?v=1794772624"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/collections\/images_20_2818_29_1789175589__64859.png?v=1794865767","url":"https:\/\/offroadsource.com\/collections\/hostile.oembed","provider":"Offroad Source","version":"1.0","type":"link"}