{"title":"KMC","description":null,"products":[{"product_id":"18x9-black-blue-wheel-km549-grs-5x5-12-km54989050912n","title":"KM549 Grs Black Blue | 18x9 | 5x5 -12mm Offset | KM54989050912N","description":"\u003cp\u003eBuilt for Jeep and Truck Platforms on 5x127\u003c\/p\u003e\u003cp\u003eJeep Wrangler owners (2007-2026) will find the KMC KM549 GRS sized and offset for their platform right out of the box. The 5x127 (5x5) bolt pattern also fits Jeep Grand Cherokee (1999-2026), Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), GMC Yukon (1992-1999), and 10 additional verified platforms across 32 total fitments. The 71.5mm hub bore fits these 5x127 applications, and the 2,500-lb load rating supports the demands of daily-driven and trail-ready builds alike.\u003c\/p\u003e\u003cp\u003eMidnight Blue Finish with Simulated Beadlock\u003c\/p\u003e\u003cp\u003eThe KM549 GRS runs a Midnight Blue finish with a Gloss Black simulated beadlock ring circling the outer edge. The midnight blue gives the face a deep, saturated tone that pairs well with dark truck and Jeep builds, while the gloss black beadlock ring adds a layered, off-road-ready look without the complexity of a functional beadlock setup. Exposed lug hardware sits in a circle around the hub bore, visible on the face and adding to the rugged, hardware-forward aesthetic. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eSplit Eight-Spoke Mesh Design\u003c\/p\u003e\u003cp\u003eThe GRS runs a split eight-spoke mesh pattern across the face, with each spoke pairing up to create a tight, interlocking grid that gives the wheel visual density and depth. The design suits builds going for an aggressive, utilitarian look, and the outer lip frames the profile with a clean edge. At 18x9 inches and 35.55 lbs, this one-piece alloy wheel carries the structural integrity for full-size truck and Jeep applications without unnecessary bulk.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eKMC builds the GRS as a one-piece alloy wheel, a construction that supports the complex mesh design geometry and simulated beadlock ring in a single continuous shape. One-piece alloy is the proven workhorse of the aftermarket: reliable long-haul value, consistent structural integrity across load cycles, and a price point that makes aggressive fitment accessible across a wide range of builds. The 4.53 inches of backspacing and -12mm offset place the mounting surface rearward of the wheel's centerline, pushing the wheel outward for a more aggressive stance than stock.\u003c\/p\u003e\u003cp\u003eFitment Details\u003c\/p\u003e\u003cp\u003eAt 18x9 with a -12mm offset, the mounting surface sits behind the wheel's centerline, moving the wheel outward relative to the hub. On Jeep Wrangler and Grand Cherokee builds, this outboard positioning adds visual width and presence, and pairs well with a leveling kit or lift kit to take full advantage of the stance. The KM549 GRS is also offered in additional sizes, finishes, and bolt patterns across the KMC lineup for builds with different fitment needs.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.53\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e71.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack Blue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2500 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e39.55 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"KMC","offers":[{"title":"Default Title","offer_id":68713116401945,"sku":"KM54989050912N","price":424.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/km549_blackblue_white__50278.jpg?v=1794773039"},{"product_id":"20x9-bronze-black-wheel-km552-ims-6x135-18-km552zb20906318","title":"KM552 Ims Bronze Black | 20x9 | 6x135 +18mm Offset | KM552ZB20906318","description":"\u003cp\u003eBuilt for Ford's 6x135 Platform\u003c\/p\u003e\u003cp\u003eThe KMC KM552 IMS lands squarely in Ford's 6x135 universe, fitting the F-150 (2004-2026), Expedition (2003-2027), Lincoln Navigator (2003-2027), F-150 Lightning (2022-2026), and Ford Bronco (2022-2026), with one additional verified platform in the lineup. The 87.1mm hub bore fits these Ford and Lincoln applications, and the 3,700-lb load rating supports the payload and towing demands that come with full-size truck and SUV use.\u003c\/p\u003e\u003cp\u003eTwo-Tone Finish With Depth\u003c\/p\u003e\u003cp\u003eThe IMS runs a Matte Bronze finish across the face with a Gloss Black lip, a two-tone pairing that gives the wheel visual contrast without relying on machining or polishing. The matte surface on the face keeps the bronze tones subdued and consistent, while the gloss black lip sharpens the outer edge. The concave face profile adds depth to the design, pulling the spokes inward and giving the wheel a more dimensional look from the side. A center cap is included with this wheel, covering the lug hardware at the hub for a clean, finished appearance.\u003c\/p\u003e\u003cp\u003eEight-Spoke Cast Alloy Construction\u003c\/p\u003e\u003cp\u003eThe KM552 IMS is a one-piece cast alloy wheel with eight spokes radiating from the hub. Cast construction supports the spoke geometry and concave profile in a single continuous shape, delivering the reliable long-haul value that has made cast alloy the most widely used method in aftermarket wheel manufacturing. At 41.67 lbs, the wheel is well within the expected range for this size and application. KMC's broad lineup across street, truck, and off-road segments means the IMS benefits from the brand's consistent production standards and wide distribution backing.\u003c\/p\u003e\u003cp\u003eOffset and Fitment Details\u003c\/p\u003e\u003cp\u003eFord F-150 owners and Expedition and Navigator drivers get a wheel sized for the platform's proportions. At 20x9 with a +18mm offset, the mounting surface sits forward of the wheel's centerline, positioning the face closer to the fender opening. The 5.71 inches of backspacing reflects that forward-mounted position. This offset keeps the wheel tucked within the fender arch, making it a natural fit for stock-height and leveled trucks as well as builds running a lift kit. The 9-inch width at +18mm does not push the wheel outboard for an aggressive stance, but it delivers a truck-scaled presence that suits the F-150 and Expedition family well. The IMS is also offered in additional sizes and finish options across the KMC lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x135\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e18 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5.71\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBronze Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e3700 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e45.67 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"KMC","offers":[{"title":"Default Title","offer_id":68713116500249,"sku":"KM552ZB20906318","price":475.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/km552_bronzeblack_white__41926.jpg?v=1794773039"},{"product_id":"17x8-5-anthracite-wheel-km550-riot-sbl-5x5-10-km550ab17855010","title":"KM550 Riot Sbl Anthracite | 17x8.5 | 5x5 +10mm Offset | KM550AB17855010","description":"\u003cp\u003eJeep and Truck Fitment on the 5x127 Pattern\u003c\/p\u003e\u003cp\u003eJeep Wrangler owners (2007-2026) get a wheel sized for the platform's proportions and trail-ready demands. The KMC KM550 Riot SBL also fits the Jeep Grand Cherokee (1999-2026), Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), with 10 additional verified platforms in the 5x127 (5x5) universe. The 71.5mm hub bore fits these platforms, and the 2,500-lb load rating supports the demands of loaded Jeep builds and full-size truck applications alike.\u003c\/p\u003e\u003cp\u003eEight-Spoke Concave Design\u003c\/p\u003e\u003cp\u003eThe Riot SBL carries an eight-spoke layout with a concave face profile, giving the wheel visual depth that suits the proportions of a lifted Jeep or full-size truck. The anthracite finish covers the face and spokes, while the satin black lip adds a two-tone contrast that separates the barrel from the face without going chrome-bright. Lug hardware sits exposed on the face around the hub area, making the mounting hardware part of the visual detail rather than hiding it behind a cap. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eCast Alloy Construction\u003c\/p\u003e\u003cp\u003eKMC builds the Riot SBL as a one-piece cast alloy wheel, a construction that supports the complex spoke geometry and concave face profile in a single continuous shape. Cast alloy delivers proven structural integrity and long-haul value, making it a reliable choice for daily-driven Jeeps and trucks that see varied road conditions. At 30.1 lbs, the wheel carries the weight expected for this size and construction.\u003c\/p\u003e\u003cp\u003eOffset and Backspacing Details\u003c\/p\u003e\u003cp\u003eThe +10mm offset places the mounting surface slightly forward of the wheel's centerline, keeping the wheel positioned close to the factory track width. Backspacing measures 5.14 inches. At 17x8.5 inches with a positive offset, this wheel sits within a range suited to stock and leveled builds where maintaining clearance inside the fender is the priority. The KM550 Riot SBL is also offered in additional sizes, finishes, and bolt patterns across the lineup for builds with different fitment targets.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e8.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5.14\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e71.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eAnthracite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2500 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e34.1 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"KMC","offers":[{"title":"Default Title","offer_id":68713116893465,"sku":"KM550AB17855010","price":374.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/km550_anthracite_white__04523.jpg?v=1794773041"},{"product_id":"20x9-machined-black-wheel-km552-ims-6x135-18-km552db20906318","title":"KM552 Ims Machined Black | 20x9 | 6x135 +18mm Offset | KM552DB20906318","description":"\u003cp\u003eBuilt for Ford's 6x135 Platform\u003c\/p\u003e\u003cp\u003eThe KMC KM552 IMS lands squarely in Ford's 6x135 universe, fitting the F-150 (2004-2026), Expedition (2003-2027), Lincoln Navigator (2003-2027), F-150 Lightning (2022-2026), and Ford Bronco (2022-2026), with one additional verified platform in the lineup. The 87.1mm hub bore fits these Ford and Lincoln platforms, and the 3,700-lb load rating supports the payload and towing demands that come with full-size truck and SUV use.\u003c\/p\u003e\u003cp\u003eEight-Spoke Design with Machined Contrast\u003c\/p\u003e\u003cp\u003eThe KM552 IMS carries eight spokes across a concave face, giving the wheel visual depth without overcomplicating the design. The finish is machined with a black lip: the spoke faces and face surfaces are machined to a brighter, reflective contrast against the darker surrounding areas, while the outer lip runs in black to frame the profile. Exposed lug hardware sits in a circle around the hub bore, adding a purposeful, hardware-forward look to the center of the wheel. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eKMC builds the IMS as a one-piece alloy wheel, a construction that suits the brand's high-volume, wide-distribution approach: cast alloy molds support the concave spoke geometry and contoured lip in a single continuous shape, keeping the design's structural depth intact through every load cycle. At 41.67 lbs, the wheel carries the structural integrity the 3,700-lb load rating demands across daily-driven truck and SUV applications.\u003c\/p\u003e\u003cp\u003eOffset and Fitment Details\u003c\/p\u003e\u003cp\u003eAt 20x9 with a +18mm offset, the mounting surface sits forward of the wheel's centerline, positioning the wheel closer to the vehicle's face side. On Ford full-size platforms, this keeps the wheel tucked within the fender arch for a clean, composed stance that works across stock-height and leveled setups alike. Backspacing measures 5.71 inches. The KM552 IMS is also offered in additional sizes, widths, and finish options across the lineup, covering both 6-lug and other bolt-pattern groups for broader truck and SUV fitment.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x135\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e18 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5.71\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eMachined Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e3700 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e45.67 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"KMC","offers":[{"title":"Default Title","offer_id":68713117090073,"sku":"KM552DB20906318","price":475.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/km552_machinedblack_white__78486.jpg?v=1794773041"},{"product_id":"17x9-anthracite-wheel-km550-riot-sbl-5x5-12-km550ab17905012n","title":"KM550 Riot Sbl Anthracite | 17x9 | 5x5 -12mm Offset | KM550AB17905012N","description":"\u003cp\u003eBuilt for Jeep and Truck Platforms\u003c\/p\u003e\u003cp\u003eJeep Wrangler owners (2007-2026) will find the KMC KM550 Riot SBL sized and offset for the platform's demands. The 5x127 (5x5) bolt pattern also fits the Jeep Grand Cherokee (1999-2026), Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), with 10 additional verified platforms rounding out the fitment universe. The 71.5mm hub bore fits these 5x127 applications, and the 2,500-lb load rating supports the demands of a loaded Wrangler or full-size truck.\u003c\/p\u003e\u003cp\u003eEight-Spoke Concave Design\u003c\/p\u003e\u003cp\u003eThe Riot SBL carries an eight-spoke layout with a concave face profile that gives the wheel visual depth from any angle. The anthracite finish covers the face and spokes, while the satin black lip frames the outer edge in a contrasting matte tone. Exposed lug hardware sits in a circle around the hub bore, visible on the face and adding a purposeful, hardware-forward look to the overall design. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eKMC builds the Riot SBL as a one-piece alloy wheel, a construction that suits the wide range of applications this wheel covers. Cast alloy supports the concave spoke geometry and the deep barrel profile in a single continuous shape, keeping the design structurally intact across load cycles. At 29.7 lbs, the wheel carries the mass you would expect from a 17-inch alloy built for truck and Jeep fitment. The 4.53 inches of backspacing positions the mounting surface appropriately for the platform.\u003c\/p\u003e\u003cp\u003eOffset and Stance\u003c\/p\u003e\u003cp\u003eAt -12mm, the mounting surface sits rearward of the wheel's centerline, pushing the wheel outward relative to the hub. On a 9-inch-wide wheel, this offset moves the face outboard for a more aggressive stance than stock positioning. The combination of 9-inch width and -12mm offset qualifies for wider-stance framing: the wheel sits noticeably outboard and fills the fender arch with more presence than a factory wheel would. This is a wheel sized for builds that want a planted, outward-leaning look without going to an extreme offset.\u003c\/p\u003e\u003cp\u003eAdditional Sizes and Finishes\u003c\/p\u003e\u003cp\u003eThe KM550 Riot SBL is offered across additional sizes, widths, and finish options beyond this 17x9 anthracite example, including other bolt-pattern groups to cover a broader range of truck and Jeep builds.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.53\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e71.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eAnthracite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2500 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e33.7 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"KMC","offers":[{"title":"Default Title","offer_id":68713117352217,"sku":"KM550AB17905012N","price":374.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/km550_anthracite_white__19569.jpg?v=1794773042"},{"product_id":"17x8-5-black-wheel-km552-ims-6x5-5-10-km552mb17856810n","title":"KM552 Ims Black | 17x8.5 | 6x5.5 -10mm Offset | KM552MB17856810N","description":"\u003cp\u003eBuilt for the 6x139.7 Platform\u003c\/p\u003e\u003cp\u003eThe KMC KM552 IMS lands squarely in the 6x139.7 (6x5.5) bolt pattern universe, covering some of the most popular full-size and mid-size truck platforms on the road. Verified fitment includes the Chevrolet Silverado 1500 (1999-2026), GMC Sierra 1500 (2000-2026), Toyota Tacoma (1995-2026), Toyota Tundra (2000-2026), and Chevrolet K1500 (1988-1999), with 10 additional verified platforms across 114 total fitments. The 106.10mm hub bore fits these 6x139.7 applications, and the 2,500-lb load rating supports the demands of a working or built-out truck.\u003c\/p\u003e\u003cp\u003eEight-Spoke Concave Face, Two-Tone Finish\u003c\/p\u003e\u003cp\u003eThe IMS runs an eight-spoke design with a concave face profile that gives the wheel visual depth from any angle. The finish pairs a matte black face with a gloss black lip, creating a two-tone contrast that keeps the look intentional without relying on chrome or machined brightwork. Exposed lug hardware sits in a circle around the hub bore, visible on the face and adding a hardware-forward detail to the overall look. A center cap is included with this wheel, covering the hub area when you want a cleaner presentation. The gloss lip frames the concave face and adds a subtle sheen that plays off the matte surfaces without competing with them.\u003c\/p\u003e\u003cp\u003eOne-Piece Cast Alloy Construction\u003c\/p\u003e\u003cp\u003eKMC builds the KM552 IMS as a one-piece cast alloy wheel, a construction that has made cast the backbone of the aftermarket wheel industry for good reason. Cast molds support complex geometry, including the concave spoke profile and contoured lip that define this design, in a single continuous pour. The result is a wheel that holds its shape and structural integrity across the load cycles a truck puts it through. At 30.42 lbs, the IMS carries the weight you'd expect from a one-piece cast wheel at this size, with the long-haul reliability that construction is known for.\u003c\/p\u003e\u003cp\u003eOffset and Fitment Details\u003c\/p\u003e\u003cp\u003eAt 17x8.5 with a -10mm offset, the mounting surface sits rearward of the wheel's centerline, pushing the face outward relative to stock positioning. The -10mm offset moves the wheel outboard for a more planted, wider-looking stance than a zero or positive offset would deliver. Backspacing measures 4.36 inches. This size works across stock, leveled, and lifted truck setups on the 6x139.7 platform, and the IMS is also offered in additional sizes, widths, finishes, and bolt patterns across the KMC lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e8.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.36\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2500 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e34.42 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"KMC","offers":[{"title":"Default Title","offer_id":68713117483289,"sku":"KM552MB17856810N","price":374.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/km552_black_white__69094.jpg?v=1794773042"},{"product_id":"18x9-anthracite-wheel-km550-riot-sbl-5x5-18-km550ab18905018","title":"KM550 Riot Sbl Anthracite | 18x9 | 5x5 +18mm Offset | KM550AB18905018","description":"\u003cp\u003eBuilt for the 5x127 Platform\u003c\/p\u003e\u003cp\u003eJeep Wrangler owners (2007-2026) get a wheel sized and styled for the platform's aggressive character. The KMC KM550 Riot SBL runs an 18x9 footprint on the 5x127 (5x5) bolt pattern, covering Jeep Grand Cherokee (1999-2026), Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), GMC Yukon (1992-1999), and 10 additional verified platforms across 32 total fitments. The 71.5mm hub bore fits these platforms, and the 2,500-lb load rating supports the demands of daily-driven and trail-ready Jeep builds alike.\u003c\/p\u003e\u003cp\u003eEight-Spoke Concave Face, Exposed Hardware\u003c\/p\u003e\u003cp\u003eThe Riot SBL's eight-spoke layout works with a concave face profile to give the wheel visual depth from any angle. The spokes draw inward toward the hub, creating a recessed center that adds dimension without layering on extra detail. Lug hardware sits exposed around the hub bore, visible on the face and adding a purposeful, hardware-forward look that suits the Wrangler's utilitarian character. The satin black lip frames the outer edge with a contrasting finish that separates the face from the barrel. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eAnthracite Finish with Satin Black Contrast\u003c\/p\u003e\u003cp\u003eThe anthracite finish covers the face and spokes in a dark, muted tone that holds up against trail dust, brake residue, and seasonal road grime without demanding constant attention. The satin black lip adds a second finish layer at the outer edge, giving the wheel a two-tone look that works across both stock-height and lifted Wrangler builds. At 32.1 lbs, the one-piece alloy construction keeps the wheel practical for everyday use.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eKMC builds the Riot SBL as a single-piece alloy wheel, a construction approach that has made KMC one of the most widely trusted names in the aftermarket for consistent, repeatable quality across a broad range of truck and off-road applications. One-piece construction supports the concave spoke geometry and the deep outer lip in a continuous shape, maintaining structural integrity through the full load cycle. The 5.71 inches of backspacing and +18mm offset place the mounting surface forward of the wheel's centerline, positioning the wheel closer to the vehicle's body side for a tucked, clean stance.\u003c\/p\u003e\u003cp\u003eFitment Details\u003c\/p\u003e\u003cp\u003eJeep Wrangler JK and JL owners running stock height or a leveling kit will find this 18x9 setup sits well within the platform's clearance envelope. The +18mm offset keeps the wheel positioned inward, which suits builds that want a clean, controlled look without aggressive outboard poke. The Riot SBL is also offered in additional sizes, widths, and finishes across the KM550 lineup, covering both 6-lug and 5-lug bolt patterns for a wider range of truck and SUV applications.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e18 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5.71\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e71.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eAnthracite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2500 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e36.1 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"KMC","offers":[{"title":"Default Title","offer_id":68713117712665,"sku":"KM550AB18905018","price":424.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/km550_anthracite_white__19597.jpg?v=1794773043"},{"product_id":"17x8-5-silver-machined-wheel-km552-ims-6x5-5-10-km552sd17856810n","title":"KM552 Ims Silver Machined | 17x8.5 | 6x5.5 -10mm Offset | KM552SD17856810N","description":"\u003cp\u003eBuilt for the 6x139.7 Platform\u003c\/p\u003e\u003cp\u003eThe Chevrolet Silverado 1500, GMC Sierra 1500, Toyota Tacoma, and Toyota Tundra all share the 6x139.7 (6x5.5) bolt pattern, and the KMC KM552 IMS is sized to fit them well. The 106.1mm hub bore fits these platforms, and the 2,500-lb load rating supports the demands of a daily-driven full-size or mid-size truck. Fitment extends across 114 verified applications, including the Chevrolet K1500 (1988-1999) and 10 additional platforms beyond those named here.\u003c\/p\u003e\u003cp\u003eEight-Spoke Concave Design with Exposed Hardware\u003c\/p\u003e\u003cp\u003eThe KM552 IMS runs eight spokes with a concave face profile, giving the wheel visual depth that suits the proportions of a full-size truck. The spoke faces are machined to a brighter contrast against the gloss silver surfaces, creating a two-tone look that stays sharp without relying on heavy chrome or polished finishes. Lug hardware sits exposed around the hub bore at the center of the face, adding a purposeful, hardware-forward detail to the overall look. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Cast Alloy Construction\u003c\/p\u003e\u003cp\u003eKMC builds the IMS as a one-piece cast alloy wheel, a construction that supports the complex spoke geometry and concave face profile in a single continuous shape. Cast alloy handles the deep spoke contours and machined surface detail without requiring secondary assembly, and the proven construction delivers reliable long-haul value across the high-volume truck fitment this wheel targets. At 30.42 lbs, the weight is consistent with what you'd expect from a cast alloy wheel at this size. Backspacing measures 4.36 inches.\u003c\/p\u003e\u003cp\u003eOffset and Stance at -10mm\u003c\/p\u003e\u003cp\u003eThe Silverado 1500 and Sierra 1500 are natural homes for this wheel, and the -10mm offset positions the mounting surface slightly rearward of the wheel's centerline, moving the face outward relative to stock. The result is a modest outboard shift that gives the truck a wider visual stance without pushing into aggressive poke territory. At 8.5 inches wide with a -10mm offset, this combination sits within the range suited to leveled or mildly lifted trucks where a cleaner, planted look is the goal. The KM552 IMS is also offered in additional sizes, widths, and finishes across the lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e8.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.36\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSilver Machined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2500 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e34.42 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"KMC","offers":[{"title":"Default Title","offer_id":68713117876505,"sku":"KM552SD17856810N","price":449.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/km552_silvermachined_white__53922.jpg?v=1794773043"},{"product_id":"17x8-5-satin-black-wheel-km550-riot-sbl-5x5-10-km550mx17855010","title":"KM550 Riot Sbl Satin Black | 17x8.5 | 5x5 +10mm Offset | KM550MX17855010","description":"\u003cp\u003eBuilt for the 5x127 Pattern\u003c\/p\u003e\u003cp\u003eJeep Wrangler owners (2007-2026) get a wheel sized for the platform's bolt pattern and proportions, and the KMC KM550 Riot delivers exactly that. The 5x127 (5x5) bolt pattern covers the Wrangler across its JK and JL generations, along with the Jeep Grand Cherokee (1999-2026), Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), GMC Yukon (1992-1999), and 10 additional verified platforms. The 71.5mm hub bore fits these applications, and the 2,500-lb load rating supports the demands of trail-ready and daily-driven builds alike.\u003c\/p\u003e\u003cp\u003eEight-Spoke Concave Design\u003c\/p\u003e\u003cp\u003eThe KM550 Riot runs eight spokes with a concave face profile, giving the wheel visual depth that suits the aggressive character of Wrangler and truck builds. The satin black finish is a flat, low-sheen surface that holds its look through trail dust, road film, and seasonal exposure without demanding constant upkeep. Lug hardware sits exposed on the face around the hub area, adding a purposeful, hardware-forward detail to the overall look. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eKMC builds the Riot as a one-piece alloy wheel, a construction that has made cast aluminum the backbone of the aftermarket wheel industry. The one-piece form supports the concave spoke geometry and outer lip in a single continuous shape, keeping the design's structural depth intact through load cycles on and off pavement. At 30.1 lbs, the Riot sits comfortably within the expected weight range for this size and construction.\u003c\/p\u003e\u003cp\u003eFitment Details\u003c\/p\u003e\u003cp\u003eAt 17x8.5 with a +10mm offset, the mounting surface sits slightly forward of the wheel's centerline, keeping the wheel positioned close to the factory track width. The 5.14 inches of backspacing reflects that positioning. This is a wheel sized for trucks and Jeeps running stock or leveled setups, where the proportions work with the platform rather than pushing aggressively outboard. The Riot is also offered in additional sizes, widths, and finishes across the KM550 lineup, covering both 6-lug and 5-lug bolt patterns for a wider range of builds.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e8.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5.14\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e71.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSatin Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2500 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e34.1 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"KMC","offers":[{"title":"Default Title","offer_id":68713118138649,"sku":"KM550MX17855010","price":374.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/km550_satinblack_white__53548.jpg?v=1794773044"},{"product_id":"17x8-5-black-wheel-km552-ims-6x5-5-25-km552mb17856825","title":"KM552 Ims Black | 17x8.5 | 6x5.5 +25mm Offset | KM552MB17856825","description":"\u003cp\u003eBuilt for the 6x139.7 Platform\u003c\/p\u003e\u003cp\u003eThe KMC KM552 IMS lands on one of the most widely shared 6-lug truck patterns in the aftermarket: 6x139.7 (6x5.5). Verified fitment covers the Chevrolet Silverado 1500 (1999-2026), GMC Sierra 1500 (2000-2026), Toyota Tacoma (1995-2026), Toyota Tundra (2000-2026), and Chevrolet K1500 (1988-1999), with 10 additional verified platforms across 114 total fitments. The 106.1mm hub bore fits these platforms, and the 3,700-lb load rating supports the payload and towing demands common to full-size and mid-size truck builds.\u003c\/p\u003e\u003cp\u003eEight-Spoke Concave Design\u003c\/p\u003e\u003cp\u003eThe IMS carries eight spokes in a concave profile, giving the face visual depth without overcomplicating the design. The two-tone finish pairs a matte black face with a gloss black lip, creating a contrast that suits both stock-height and lifted-truck setups without relying on chrome or machined accents. Lug hardware sits exposed on the face around the hub, adding a purposeful, hardware-forward look that fits the truck-build aesthetic KMC is known for across its lineup. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Cast Alloy Construction\u003c\/p\u003e\u003cp\u003eKMC builds the IMS as a one-piece cast alloy wheel, a construction that supports the complex concave spoke geometry and two-tone finish in a single continuous form. Cast alloy handles the deep spoke profile and contoured lip without the assembly complexity of a multi-piece build, and the proven construction delivers reliable long-haul value at a price point that makes sense for a daily-driven truck. At 32.08 lbs, the weight is in line with what this size and construction typically produce.\u003c\/p\u003e\u003cp\u003eOffset and Fitment Details\u003c\/p\u003e\u003cp\u003eAt 17x8.5 with a +25mm offset, the mounting surface sits forward of the wheel's centerline, positioning the barrel inward relative to a more neutral or negative offset. The 5.73 inches of backspacing reflects that inboard positioning. This offset works well on stock and leveled trucks where the goal is a clean, tucked stance rather than an outboard push. The 8.5-inch width gives the wheel a truck-scaled presence without requiring clearance modifications on most of the verified platforms. The KM552 IMS is also offered in additional sizes, widths, and finishes across the broader lineup for builds with different fitment targets.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e8.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e25 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5.73\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e3700 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e36.08 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"KMC","offers":[{"title":"Default Title","offer_id":68713118302489,"sku":"KM552MB17856825","price":370.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/km552_black_white__87475.jpg?v=1794773045"},{"product_id":"17x9-satin-black-wheel-km550-riot-sbl-5x5-12-km550mx17905012n","title":"KM550 Riot Sbl Satin Black | 17x9 | 5x5 -12mm Offset | KM550MX17905012N","description":"\u003cp\u003eBuilt for the 5x127 Platform\u003c\/p\u003e\u003cp\u003eJeep Wrangler owners (2007-2026) get a wheel sized and offset for the platform's wide stance demands. The KMC KM550 Riot also fits Jeep Grand Cherokee (1999-2026), Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), with 10 additional verified fits across the 5x127 (5x5) universe. The 71.5mm hub bore fits these platforms, and the 2,500-lb load rating supports the payload demands of full-size truck and SUV applications.\u003c\/p\u003e\u003cp\u003eEight-Spoke Design with Concave Face\u003c\/p\u003e\u003cp\u003eThe Riot's eight-spoke layout gives the face an open, structured look with a concave profile that adds visual depth to the design. The spokes draw inward toward the hub, creating a recessed face that gives the wheel a more dimensional appearance from the front. Lug hardware sits exposed around the hub bore, visible on the face as part of the design rather than hidden behind a cap. A center cap is included with this wheel, covering the hub area when preferred. The outer lip frames the barrel profile, and the satin black finish carries across the entire wheel for a consistent, low-glare look that holds up through daily use.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eKMC builds the Riot as a one-piece alloy wheel, a construction that suits the wide distribution and consistent quality the brand is known for across its truck and off-road lineup. One-piece casting supports the Riot's concave spoke geometry and outer lip in a single continuous form, keeping the design's structural depth intact through every load cycle. At 29.7 lbs, the wheel carries the structural integrity the 5x127 platform demands without unnecessary bulk.\u003c\/p\u003e\u003cp\u003eOffset and Fitment Details\u003c\/p\u003e\u003cp\u003eThe Wrangler JK and JL are the natural home for this wheel. At 17x9 with a -12mm offset, the mounting surface sits rearward of the wheel's centerline, pushing the wheel outward for a more aggressive stance than stock. The 4.53 inches of backspacing positions the wheel face outboard, giving the build a wider, more planted look. This offset is a meaningful step out from factory positioning and suits builds running a lift kit where additional clearance supports the outboard wheel position. The Riot is also offered in additional sizes, widths, finishes, and bolt patterns across the KM550 lineup for builds with different fitment needs.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.53\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e71.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSatin Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2500 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e33.7 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"KMC","offers":[{"title":"Default Title","offer_id":68713118662937,"sku":"KM550MX17905012N","price":374.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/km550_satinblack_white__85978.jpg?v=1794773045"},{"product_id":"17x8-5-machined-black-wheel-km552-ims-6x5-5-25-km552db17856825","title":"KM552 Ims Machined Black | 17x8.5 | 6x5.5 +25mm Offset | KM552DB17856825","description":"\u003cp\u003eBuilt for the 6x139.7 Platform\u003c\/p\u003e\u003cp\u003eThe KMC KM552 IMS lands squarely in the 6x139.7 (6x5.5) bolt pattern universe, one of the most widely shared 6-lug patterns in full-size and mid-size truck ownership. Verified fitment covers the Chevrolet Silverado 1500 (1999-2026), GMC Sierra 1500 (2000-2026), Toyota Tacoma (1995-2026), Toyota Tundra (2000-2026), and Chevrolet K1500 (1988-1999), with 10 additional verified platforms beyond those five. The 106.10mm hub bore fits these platforms, and the 3,700-lb load rating supports the payload and towing demands that come with full-size truck use. Backspacing measures 5.73 inches.\u003c\/p\u003e\u003cp\u003eEight-Spoke Concave Design with Machined Contrast\u003c\/p\u003e\u003cp\u003eEight spokes radiate from the hub in a concave profile, giving the IMS visual depth that flat-faced wheels simply do not carry. The finish is Machined with a Black Lip: the spoke faces and wheel face carry a machined surface that brings out the aluminum's natural brightness, while the outer lip is finished in black for a sharp two-tone contrast. Exposed lug hardware sits in a circle around the hub bore, visible on the face and adding a purposeful, hardware-forward look to the center of the wheel. A center cap is included.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eKMC builds the IMS as a one-piece alloy wheel, a construction that has made cast aluminum the backbone of the aftermarket wheel market for good reason. The one-piece form supports the concave spoke geometry and the machined surface treatment without the complexity of a multi-piece assembly, keeping the design clean from hub to lip. At 32.08 lbs, the IMS carries the structural integrity the 3,700-lb load rating demands across a wide range of truck applications.\u003c\/p\u003e\u003cp\u003eOffset and Stance at 17x8.5\u003c\/p\u003e\u003cp\u003eAt 17 inches in diameter and 8.5 inches wide with a +25mm offset, the mounting surface sits forward of the wheel's centerline, positioning the wheel closer to the vehicle's face. This offset keeps the wheel tucked within the fender arch on stock and leveled trucks, making the IMS a natural fit for daily-driven setups where clearance and clean proportions matter. The 17-inch diameter pairs well with the taller sidewall tire sizes common on trucks running stock or mild lift setups, giving the build a balanced, truck-scaled presence.\u003c\/p\u003e\u003cp\u003eMore Ways to Run the IMS\u003c\/p\u003e\u003cp\u003eThe KM552 IMS is offered in additional sizes, widths, finishes, and bolt patterns beyond this 17x8.5 Machined Black setup, covering both 6-lug and 8-lug applications across a range of truck platforms.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e8.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e25 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5.73\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eMachined Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e3700 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e36.08 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"KMC","offers":[{"title":"Default Title","offer_id":68713118728473,"sku":"KM552DB17856825","price":370.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/km552_machinedblack_white__86075.jpg?v=1794773046"},{"product_id":"18x9-satin-black-wheel-km550-riot-sbl-5x5-18-km550mx18905018","title":"KM550 Riot Sbl Satin Black | 18x9 | 5x5 +18mm Offset | KM550MX18905018","description":"\u003cp\u003eBuilt for the 5x127 Bolt Pattern\u003c\/p\u003e\u003cp\u003eJeep Wrangler owners (2007-2026) will find the KMC KM550 Riot sized right for their platform, and the 5x127 (5x5) bolt pattern also fits the Jeep Grand Cherokee (1999-2026), Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), among 10 additional verified applications. The 71.5mm hub bore fits these platforms, and the 2,500-lb load rating supports the demands of full-size Jeep and truck builds. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eEight-Spoke Design with Concave Face\u003c\/p\u003e\u003cp\u003eThe KM550 Riot runs eight spokes arranged in a concave profile, giving the face visual depth that suits the aggressive character KMC is known for across its truck and off-road lineup. Exposed lug hardware sits in a circle around the hub bore at the center of the face, adding a purposeful, hardware-forward look to the design. The outer lip frames the barrel, and the overall geometry keeps the Riot looking planted and intentional on lifted Jeep and truck builds.\u003c\/p\u003e\u003cp\u003eSatin Black Finish\u003c\/p\u003e\u003cp\u003eThe satin black finish sits between matte and gloss, delivering a subdued, low-sheen look that holds up well against trail dust, road film, and seasonal grime. No machined or milled surfaces interrupt the finish, so the entire face carries a consistent, uniform tone. For builds where a clean, non-reflective appearance is the goal, the satin black keeps the wheel looking sharp without demanding constant attention.\u003c\/p\u003e\u003cp\u003eOne-Piece Cast Alloy Construction\u003c\/p\u003e\u003cp\u003eThe Riot is cast in one piece from alloy aluminum. Cast construction supports the concave spoke geometry and the deep barrel profile in a single continuous shape, keeping the design structurally intact through load cycles. At 32.1 lbs, the wheel sits within the expected range for this size and construction. The one-piece build also means there are no seams or hardware to maintain across the face or barrel.\u003c\/p\u003e\u003cp\u003eFitment Details\u003c\/p\u003e\u003cp\u003eAt 18x9 with a +18mm offset, the mounting surface sits forward of the wheel's centerline, positioning the barrel inboard relative to a zero-offset wheel. The 5.71 inches of backspacing reflects that inboard positioning. This offset works well on lifted Jeep Wrangler and truck platforms where the added ride height creates clearance for a wider tire without pushing the wheel excessively outboard. The KM550 Riot is also offered in additional sizes, widths, and finishes across the lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e18 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5.71\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e71.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSatin Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2500 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e36.1 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"KMC","offers":[{"title":"Default Title","offer_id":68713118990617,"sku":"KM550MX18905018","price":424.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/km550_satinblack_white__07726.jpg?v=1794773046"},{"product_id":"17x8-5-silver-machined-wheel-km552-ims-6x5-5-25-km552sd17856825","title":"KM552 Ims Silver Machined | 17x8.5 | 6x5.5 +25mm Offset | KM552SD17856825","description":"\u003cp\u003eBuilt for the 6x139.7 Platform\u003c\/p\u003e\u003cp\u003eThe KMC KM552 IMS lands on one of the most widely shared 6-lug truck patterns in the aftermarket: 6x139.7 (6x5.5). Verified fitment covers the Chevrolet Silverado 1500 (1999-2026), GMC Sierra 1500 (2000-2026), Chevrolet K1500 (1988-1999), Toyota Tacoma (1995-2026), and Toyota Tundra (2000-2026), with 10 additional verified platforms across 114 total fitments. The 106.1mm hub bore fits these GM and Toyota truck platforms, and the 3,700-lb load rating supports the payload and towing demands common to full-size and mid-size truck builds.\u003c\/p\u003e\u003cp\u003eEight-Spoke Concave Design\u003c\/p\u003e\u003cp\u003eThe IMS runs eight spokes with a concave face profile, giving the wheel visual depth that suits the proportions of a full-size or mid-size truck. The spokes carry a gloss silver finish while the spoke faces are machined to a brighter, contrasting tone, creating a two-tone look that adds definition without relying on heavy graphics or color. Exposed lug hardware sits in a circle around the hub bore at the center of the face, adding a purposeful, hardware-forward detail to the overall look. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eKMC builds the IMS as a one-piece alloy wheel, a construction that has earned its place across the aftermarket by supporting complex face geometry, including the concave profile and machined spoke faces this design relies on, within a single continuous structure. One-piece alloy carries a proven track record for long-haul reliability and consistent load performance, which is why it remains the go-to construction for truck-focused wheel lines at this price point. At 36.08 lbs, the weight reflects the 17x8.5 barrel dimensions and the 3,700-lb load rating this wheel is built to carry.\u003c\/p\u003e\u003cp\u003eFitment Details\u003c\/p\u003e\u003cp\u003eAt 17 inches in diameter and 8.5 inches wide with a +25mm offset, the mounting surface sits forward of the wheel's centerline, keeping the wheel positioned closer to the vehicle's face. The 5.73 inches of backspacing places the wheel inboard relative to a deeply negative setup, which suits stock and leveled truck builds where clearance is tighter. This is a truck-scaled combination for builds that want a clean, finished look without pushing the wheel aggressively outboard. The KM552 IMS is also offered in additional sizes, widths, finishes, and bolt patterns across the lineup, covering both 6-lug and 8-lug applications.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e8.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e25 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5.73\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSilver Machined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e3700 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e36.08 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"KMC","offers":[{"title":"Default Title","offer_id":68713119187225,"sku":"KM552SD17856825","price":445.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/km552_silvermachined_white__85613.jpg?v=1794773047"},{"product_id":"17x8-5-machined-black-wheel-km552-ims-5x5-10-km552db17855010n","title":"KM552 Ims Machined Black | 17x8.5 | 5x5 -10mm Offset | KM552DB17855010N","description":"\u003cp\u003eBuilt for the 5x127 Platform\u003c\/p\u003e\u003cp\u003eJeep Wrangler owners (2007-2026) are the natural home for the KMC KM552 IMS, and the 5x127 (5x5) bolt pattern confirms it. The KM552 also fits Jeep Grand Cherokee (1999-2026), Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), with 10 additional verified platforms rounding out a fitment universe of 32 total applications. The 71.5mm hub bore fits these 5x127 platforms, and the 2,500-lb load rating supports the demands of a loaded Wrangler or full-size SUV.\u003c\/p\u003e\u003cp\u003eEight-Spoke Concave Design, Machined Contrast\u003c\/p\u003e\u003cp\u003eThe KM552 IMS runs eight spokes in a concave profile, giving the face visual depth that flat designs simply cannot match. The finish is machined with a black lip: the spoke faces and disc carry a machined surface that opens up a bright, metallic contrast against the surrounding black areas, while the outer lip holds a matte black tone that grounds the look. Exposed lug hardware sits in a ring around the hub bore at the center of the face, adding a purposeful, hardware-forward detail that suits the Wrangler's character. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eKMC builds the IMS as a one-piece alloy wheel, a construction that has earned its place across KMC's broad lineup by delivering reliable structural integrity and consistent quality at a price point that makes sense for truck and Jeep builds. The one-piece form carries the concave spoke geometry and machined finish in a single continuous shape, keeping the design's depth intact through every load cycle. At 31.08 lbs, the wheel sits comfortably within the expected range for this size and application.\u003c\/p\u003e\u003cp\u003eOffset and Fitment Details\u003c\/p\u003e\u003cp\u003eAt 17x8.5 with a -10mm offset, the mounting surface sits rearward of the wheel's centerline, pushing the wheel slightly outboard of stock positioning. The 4.36 inches of backspacing positions the wheel appropriately for Wrangler and full-size truck applications running stock or leveled setups. This is a measured outboard shift rather than an extreme aggressive stance move, making it a practical choice for builds that want a cleaner, wider look without requiring significant clearance work.\u003c\/p\u003e\u003cp\u003eMore Ways to Run the IMS\u003c\/p\u003e\u003cp\u003eThe KM552 IMS is offered in additional sizes, widths, finishes, and bolt-pattern options beyond this 17x8.5 Machined Black setup, so there are paths to fit a range of builds across the 5x127 universe and beyond.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e8.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.36\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e71.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eMachined Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2500 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e35.08 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"KMC","offers":[{"title":"Default Title","offer_id":68713119580441,"sku":"KM552DB17855010N","price":374.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/km552_machinedblack_white__23567.jpg?v=1794773047"},{"product_id":"18x9-silver-machined-wheel-km552-ims-6x5-5-0-km552sd18906800","title":"KM552 Ims Silver Machined | 18x9 | 6x5.5 0mm Offset | KM552SD18906800","description":"\u003cp\u003eBuilt for the 6x139.7 Platform\u003c\/p\u003e\u003cp\u003eThe Chevrolet Silverado 1500, GMC Sierra 1500, Toyota Tacoma, Toyota Tundra, and Chevrolet K1500 are the core of the 6x139.7 (6x5.5) universe, and the KMC KM552 IMS is sized and drilled to fit all of them. At 18x9 with a 0mm offset, the mounting surface sits exactly at the wheel's centerline, placing the barrel evenly between the hub face and the outer edge for a balanced, planted stance across these full-size and mid-size truck platforms. The 106.1mm hub bore fits these applications, and the 3,700-lb load rating supports the payload and towing demands common to this class. Beyond the five primary platforms, this wheel fits 10 additional verified applications across the 6x139.7 fitment universe.\u003c\/p\u003e\u003cp\u003eSplit-Spoke Mesh Design\u003c\/p\u003e\u003cp\u003eThe KM552 IMS runs a split eight-spoke mesh layout across the face, with each spoke dividing into two tines as it radiates outward from the hub. The open mesh geometry gives the wheel visual depth without overcrowding the face, and the machined spoke faces add a bright contrast against the gloss silver background. Exposed lug hardware sits in a circle around the hub bore, keeping the mounting hardware visible as part of the face's overall look. A center cap is included. The outer lip adds a clean edge to the profile, and the non-directional pattern means mounting orientation is flexible.\u003c\/p\u003e\u003cp\u003eReal Beadlock Construction\u003c\/p\u003e\u003cp\u003eThe KM552 IMS is built with a real beadlock ring, not a cosmetic simulation. The beadlock clamps the tire bead mechanically to the wheel, holding the bead in place under conditions where a standard drop-center mount would allow the tire to unseat. This is a functional feature for builds that run reduced tire pressures off-road, where bead retention matters. One-piece alloy construction keeps the structure unified from hub to barrel.\u003c\/p\u003e\u003cp\u003eFinish and Weight\u003c\/p\u003e\u003cp\u003eThe Gloss Silver with Machined Spoke Faces finish pairs a gloss silver background with spoke faces machined to a brighter, more reflective contrast. The machined surfaces are cut directly into the alloy, so the contrast between the two tones is structural rather than painted. At 40.2 lbs, the weight reflects the one-piece alloy build combined with the real beadlock ring hardware, which adds mass over a standard cast wheel of the same size.\u003c\/p\u003e\u003cp\u003eFitment Across the Lineup\u003c\/p\u003e\u003cp\u003eThe KM552 IMS is also offered in additional sizes, widths, and finishes across the KMC lineup, covering both 6-lug and 8-lug bolt patterns for a wider range of truck platforms. If this 18x9 in Gloss Silver with Machined Spoke Faces fits your build, the 5-inch backspacing and 0mm offset give you a centered, symmetrical wheel position on any of the 114 verified 6x139.7 platforms this wheel supports.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSilver Machined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e3700 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e40.2 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"KMC","offers":[{"title":"Default Title","offer_id":68713119809817,"sku":"KM552SD18906800","price":495.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/km552_silvermachined_white__77224.jpg?v=1794773048"},{"product_id":"18x9-machined-black-wheel-km552-ims-5x5-0-km552db18905000","title":"KM552 Ims Machined Black | 18x9 | 5x5 0mm Offset | KM552DB18905000","description":"\u003cp\u003eBuilt for the 5x127 Platform\u003c\/p\u003e\u003cp\u003eJeep Wrangler owners (2007-2026) and Jeep Grand Cherokee owners (1999-2026) are the natural home for the KMC KM552 IMS, and the 5x127 (5x5) bolt pattern confirms it. The 71.5mm hub bore fits these Jeep platforms along with Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), GMC Yukon (1992-1999), and 10 additional verified applications across the 5x127 universe. With a 3,700-lb load rating, the IMS handles the demands of loaded Wrangler builds and full-size truck setups alike.\u003c\/p\u003e\u003cp\u003eEight-Spoke Design with Machined Contrast\u003c\/p\u003e\u003cp\u003eThe KM552 IMS runs eight spokes with a concave face profile, giving the wheel visual depth that suits the Jeep and truck builds it was sized for. The finish is machined with a black lip: the spoke faces and central hub area carry a bright machined surface, while the outer lip holds a contrasting black treatment. That combination keeps the look intentional without going overboard. Lug hardware is exposed and visible on the face around the hub bore, adding a hardware-forward detail that fits the working character of the wheel. A center cap is included.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eKMC builds the IMS as a one-piece alloy wheel, a construction that supports the complex concave spoke geometry and machined face detail in a single continuous form. Cast alloy molds accommodate the deep spoke profile and the contoured transition from spoke to barrel without seams or assembly points, keeping the structural integrity consistent across the full wheel. At 36.82 lbs, the IMS carries the weight appropriate for an 18-inch truck and Jeep wheel at this load rating.\u003c\/p\u003e\u003cp\u003eFitment Details\u003c\/p\u003e\u003cp\u003eAt 18x9 with a 0mm offset, the mounting surface sits exactly at the wheel's centerline, placing the barrel evenly split between inboard and outboard. Backspacing is 5 inches. This neutral offset works across stock, leveled, and lifted Wrangler and truck setups without pushing the wheel dramatically inboard or outboard. The KM552 IMS is also offered in additional sizes, widths, and finishes across the lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e71.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eMachined Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e3700 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e40.82 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"KMC","offers":[{"title":"Default Title","offer_id":68713120006425,"sku":"KM552DB18905000","price":424.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/km552_machinedblack_white__61206.jpg?v=1794773048"},{"product_id":"18x9-black-wheel-km552-ims-6x5-5-18-km552mb18906818","title":"KM552 Ims Black | 18x9 | 6x5.5 +18mm Offset | KM552MB18906818","description":"\u003cp\u003eBuilt for the 6x139.7 Platform\u003c\/p\u003e\u003cp\u003eThe KMC KM552 IMS lands squarely in the 6x139.7 (6x5.5) bolt pattern universe, covering Chevrolet Silverado 1500 (1999-2026), GMC Sierra 1500 (2000-2026), Toyota Tacoma (1995-2026), Toyota Tundra (2000-2026), and Chevrolet K1500 (1988-1999), along with 10 additional verified platforms across 114 total fitments. The 106.10mm hub bore fits these GM and Toyota full-size and mid-size truck platforms. At 18 inches in diameter and 9 inches wide, this wheel is sized for trucks running leveling kits or lift kits where the proportions fill out the fender arch with a purposeful, planted look.\u003c\/p\u003e\u003cp\u003eEight-Spoke Concave Design, Two-Tone Finish\u003c\/p\u003e\u003cp\u003eThe IMS carries an eight-spoke layout with a concave face profile that draws the eye inward toward the hub. The spokes step back from the outer edge, giving the wheel visual depth without relying on decorative hardware. The finish pairs a matte black face with a gloss black lip, creating a two-tone contrast that keeps the look intentional without adding color. Exposed lug hardware sits in a circle around the hub bore, visible on the face and adding a mechanical detail to the overall presentation. A center cap is included, covering the hub area when the lugs are not in use.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eKMC builds the IMS as a one-piece alloy wheel, a construction that has made cast aluminum the backbone of the aftermarket wheel industry. The one-piece form supports the concave spoke geometry and the stepped lip profile in a single continuous shape, keeping the design's structural depth intact through every load cycle. The 3,700-lb load rating supports payload and towing demands common to full-size truck platforms. At 35.93 lbs, the wheel carries the weight expected for this size and construction. Backspacing measures 5.71 inches.\u003c\/p\u003e\u003cp\u003eOffset and Fitment Details\u003c\/p\u003e\u003cp\u003eThe +18mm offset places the mounting surface forward of the wheel's centerline, positioning the face closer to the fender opening. On a 9-inch-wide wheel, this offset keeps the wheel tucked within the fender arch rather than pushing outward, a profile that suits leveled and lifted truck builds where the added ride height opens up clearance. The IMS is also offered in additional sizes, widths, and finishes across the KM552 lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e18 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5.71\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e3700 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e39.93 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"KMC","offers":[{"title":"Default Title","offer_id":68713120268569,"sku":"KM552MB18906818","price":420.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/km552_black_white__24545.jpg?v=1794773049"},{"product_id":"18x9-machined-black-wheel-km552-ims-5x5-18-km552db18905018","title":"KM552 Ims Machined Black | 18x9 | 5x5 +18mm Offset | KM552DB18905018","description":"\u003cp\u003eJeep and Truck Fitment on the 5x127 Pattern\u003c\/p\u003e\u003cp\u003eJeep Wrangler owners (2007-2026) get a wheel sized and offset for their platform right out of the box. The KMC KM552 IMS also fits the Jeep Grand Cherokee (1999-2026), Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), covering a wide range of 5x127 (5x5) applications across 32 verified platforms. The 71.5mm hub bore fits these platforms, and the 3,700-lb load rating supports the demands of full-size truck and SUV use.\u003c\/p\u003e\u003cp\u003eEight-Spoke Design with Machined Contrast\u003c\/p\u003e\u003cp\u003eThe IMS runs eight spokes with a concave face profile, giving the wheel visual depth that suits the proportions of a Wrangler or full-size SUV. The finish is machined with a black lip: the spoke faces and central areas are machined to a bright metallic contrast against the darker surrounding surfaces, while the outer lip carries a black finish that frames the face cleanly. Exposed lug hardware sits in a circle around the hub bore, visible on the face and adding a purposeful, hardware-forward look to the overall design. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eKMC builds the IMS as a one-piece alloy wheel, a construction that has earned its place across KMC's broad lineup by delivering consistent structural integrity and long-term value. The one-piece form supports the concave spoke geometry without the complexity of a multi-piece assembly, keeping the design tight and the weight at a practical 36.82 lbs per wheel. The 5.71 inches of backspacing works with the +18mm offset to position the mounting surface forward of the wheel's centerline, placing the wheel in a truck-appropriate position relative to the hub.\u003c\/p\u003e\u003cp\u003eOffset and Stance for These Platforms\u003c\/p\u003e\u003cp\u003eAt +18mm, the mounting surface sits forward of the wheel's centerline, a positive offset that keeps the wheel tucked within the fender arch rather than pushing outward. For Wrangler builds and classic GM full-size platforms running the 5x127 pattern, this offset works well with stock and leveled setups, keeping the wheel positioned close to the factory track width. The 18x9 size gives the wheel a presence that suits these platforms without requiring significant clearance modifications. The KM552 IMS is also offered in additional sizes, widths, and finishes across the lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e18 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5.71\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e71.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eMachined Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e3700 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e40.82 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"KMC","offers":[{"title":"Default Title","offer_id":68713120399641,"sku":"KM552DB18905018","price":424.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/km552_machinedblack_white__58282.jpg?v=1794773050"},{"product_id":"18x9-silver-machined-wheel-km552-ims-6x5-5-18-km552sd18906818","title":"KM552 Ims Silver Machined | 18x9 | 6x5.5 +18mm Offset | KM552SD18906818","description":"\u003cp\u003eBuilt for the 6x139.7 Platform\u003c\/p\u003e\u003cp\u003eThe Chevrolet Silverado 1500, GMC Sierra 1500, Toyota Tacoma, Toyota Tundra, and Chevrolet K1500 all share the 6x139.7 (6x5.5) bolt pattern, and the KMC KM552 IMS is sized and offset to suit them. At 18x9 with a +18mm offset, the mounting surface sits forward of the wheel's centerline, placing the wheel in a position that works well across stock, leveled, and lifted truck setups. The 106.1mm hub bore fits these platforms, and the 3,700-lb load rating supports the payload demands of full-size and mid-size trucks alike. Beyond the five platforms named here, this wheel spans 114 verified fits across the 6x139.7 universe.\u003c\/p\u003e\u003cp\u003eSplit Eight-Spoke Mesh Design\u003c\/p\u003e\u003cp\u003eThe KM552 IMS runs a split eight-spoke mesh layout, where each spoke divides into two as it moves outward from the hub, creating an open, interlocking face geometry that gives the wheel visual depth without overcomplicating the design. The spoke faces are machined to a brighter contrast against the gloss silver surfaces, adding a two-tone dimension that suits the truck-forward character of the KMC lineup. Lug hardware sits exposed around the hub bore, visible on the face as part of the wheel's intentional look. A center cap is included. The outer lip adds a clean perimeter to the profile, and the non-directional layout means mounting orientation is straightforward.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eKMC builds the IMS as a one-piece alloy wheel, a construction that has made cast aluminum the backbone of the aftermarket wheel industry for good reason. The one-piece form supports the mesh spoke geometry and machined spoke faces in a single continuous shape, keeping the design's detail intact through the full load cycle. At 39.93 lbs, the weight reflects the 18-inch diameter, 9-inch width, and the structural depth the mesh design carries. The 5.71 inches of backspacing is consistent with the +18mm offset and the wheel's intended fitment range.\u003c\/p\u003e\u003cp\u003eFitment Across the 6x139.7 Lineup\u003c\/p\u003e\u003cp\u003eThe Silverado 1500 and Sierra 1500 (1999-2026 and 2000-2026, respectively) represent the core GM full-size fitment for this wheel, while the Toyota Tacoma (1995-2026) and Tundra (2000-2026) cover the Toyota side of the 6x139.7 pattern. The Chevrolet K1500 (1988-1999) rounds out the named platforms. The +18mm offset keeps the wheel positioned within the fender on most of these trucks at stock or leveled ride height, and the 18-inch diameter is a natural fit for the tire sizes these platforms commonly run. The KM552 IMS is also offered in additional sizes, widths, and finishes across the broader lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e18 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5.71\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSilver Machined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e3700 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e39.93 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"KMC","offers":[{"title":"Default Title","offer_id":68713120661785,"sku":"KM552SD18906818","price":495.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/km552_silvermachined_white__90408.jpg?v=1794773051"},{"product_id":"20x9-machined-black-wheel-km552-ims-5x5-0-km552db20905000","title":"KM552 Ims Machined Black | 20x9 | 5x5 0mm Offset | KM552DB20905000","description":"\u003cp\u003eJeep and Truck Fitment on the 5x127 Pattern\u003c\/p\u003e\u003cp\u003eThe Jeep Wrangler (2007-2026) is the natural home for the KMC KM552 IMS, and the 5x127 (5x5) bolt pattern confirms it. Grand Cherokee owners from 1999 through 2026 are equally covered, along with classic GM platforms including the Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), plus 10 additional verified applications across 32 total fitments. The 71.5mm hub bore fits these platforms, and the 3,700-lb load rating supports the demands of loaded Jeep builds and full-size truck applications alike.\u003c\/p\u003e\u003cp\u003eEight-Spoke Design with Machined Contrast\u003c\/p\u003e\u003cp\u003eThe KM552 IMS runs eight spokes with a concave face profile, giving the wheel visual depth that suits the aggressive proportions of lifted Jeep and truck builds. The finish is machined with a black lip: the spoke faces and face surfaces carry a bright machined treatment while the outer lip is finished in black, creating a two-tone contrast that keeps the look intentional without relying on chrome or heavy gloss. Lug hardware is exposed and visible on the face, sitting in a circle around the hub bore where the wheel mounts to the vehicle. A center cap is included with this wheel. Backspacing measures 5 inches.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eKMC builds the IMS as a one-piece alloy wheel, a construction that suits the complex geometry of a concave eight-spoke face. The single-piece form carries the spoke profile, concave dish, and outer lip in a continuous shape, maintaining structural integrity through the full load cycle. At 41.89 lbs, the wheel sits within the expected range for this size and application. KMC's wide distribution and consistent manufacturing standards mean this wheel arrives ready to mount without surprises.\u003c\/p\u003e\u003cp\u003eOffset and Stance on Wrangler and Truck Platforms\u003c\/p\u003e\u003cp\u003eThe 0mm offset places the mounting surface exactly at the wheel's centerline, a neutral position that works across the range of Wrangler and full-size truck applications this bolt pattern covers. Neither pushed outward nor pulled inward, the 0mm offset gives the wheel a balanced stance that pairs well with a variety of lift kit and leveling kit setups without requiring trimming or clearance work on most builds. The 20-inch diameter and 9-inch width are a truck-scaled combination suited to the platforms this wheel fits.\u003c\/p\u003e\u003cp\u003eAdditional Sizes and Finishes\u003c\/p\u003e\u003cp\u003eThe KM552 IMS is offered in additional sizes, widths, and finish options beyond this 20x9 machined black example, covering a range of bolt patterns and offset choices for different build targets.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e71.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eMachined Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e3700 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e45.89 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"KMC","offers":[{"title":"Default Title","offer_id":68713120792857,"sku":"KM552DB20905000","price":475.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/km552_machinedblack_white__06888.jpg?v=1794773051"},{"product_id":"18x9-black-wheel-km552-ims-6x5-5-30-km552mb18906830","title":"KM552 Ims Black | 18x9 | 6x5.5 +30mm Offset | KM552MB18906830","description":"\u003cp\u003eBuilt for the 6x139.7 Platform\u003c\/p\u003e\u003cp\u003eThe KMC KM552 IMS lands on one of the most widely used 6-lug truck patterns in the aftermarket: 6x139.7 (6x5.5). Verified fitment covers the Chevrolet Silverado 1500 (1999-2026), GMC Sierra 1500 (2000-2026), Toyota Tacoma (1995-2026), Toyota Tundra (2000-2026), and Chevrolet K1500 (1988-1999), with 10 additional verified platforms across 114 total fitments. The 106.1mm hub bore fits these platforms, and the 3,700-lb load rating supports the payload and towing demands common to full-size and mid-size truck builds.\u003c\/p\u003e\u003cp\u003eEight-Spoke Design with Concave Face\u003c\/p\u003e\u003cp\u003eThe IMS runs eight spokes across a concave face, giving the wheel visual depth that suits the proportions of a full-size or mid-size truck. The Matte Black finish covers the face and spokes, while the gloss black lip adds a subtle contrast at the outer edge. Exposed lug hardware sits in a circle around the hub bore, visible on the face and adding a purposeful, hardware-forward look to the design. A center cap is included with this wheel, covering the hub area when the lugs are not the intended focal point. The non-directional pattern works on any corner of the truck without rotation constraints.\u003c\/p\u003e\u003cp\u003eOne-Piece Cast Alloy Construction\u003c\/p\u003e\u003cp\u003eKMC builds the IMS as a one-piece cast alloy wheel, a construction that supports the concave spoke geometry and the deep profile this design calls for. Cast molds handle complex shapes well, and the IMS takes advantage of that with its inward-swept face and defined outer lip. At 34.61 lbs, the wheel carries the structural integrity the 3,700-lb load rating demands across daily-driven and work-use truck builds.\u003c\/p\u003e\u003cp\u003eOffset and Backspacing Details\u003c\/p\u003e\u003cp\u003eAt +30mm offset on a 9-inch-wide barrel, the mounting surface sits forward of the wheel's centerline, positioning the wheel closer to the face side. The 6.18 inches of backspacing reflects that forward mounting position. This offset keeps the wheel tucked within the fender arch on stock and leveled trucks, making the IMS a practical choice for builds that want a clean, composed stance without aggressive outboard positioning. The KM552 IMS is also offered in additional sizes, widths, and finishes across the broader KMC lineup for builds with different fitment targets.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e30 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e6.18\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e3700 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e38.61 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"KMC","offers":[{"title":"Default Title","offer_id":68713121120537,"sku":"KM552MB18906830","price":420.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/km552_black_white__40520.jpg?v=1794773052"},{"product_id":"20x9-machined-black-wheel-km552-ims-5x5-18-km552db20905018","title":"KM552 Ims Machined Black | 20x9 | 5x5 +18mm Offset | KM552DB20905018","description":"\u003cp\u003eJeep and Truck Fitment on the 5x127 Pattern\u003c\/p\u003e\u003cp\u003eJeep Wrangler owners (2007-2026) will find the KMC KM552 IMS sized and drilled for their platform, and the same 5x127 (5x5) bolt pattern extends fitment to the Jeep Grand Cherokee (1999-2026), Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), among 15 additional verified applications. The 71.5mm hub bore fits these platforms, and the 3,700-lb load rating supports the demands of full-size truck and SUV use.\u003c\/p\u003e\u003cp\u003eEight-Spoke Design with Machined Contrast\u003c\/p\u003e\u003cp\u003eThe IMS runs eight spokes with a concave face profile, giving the wheel visual depth that suits the proportions of a 20-inch diameter. The finish is machined with a black lip: the spoke faces and face surfaces carry a bright machined treatment, while the outer lip is finished in black for a two-tone contrast that keeps the look intentional without being overdone. Exposed lug hardware sits in a circle around the hub bore, visible on the face and adding a hardware-forward detail to the overall look. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eThe IMS is cast in one piece from alloy, a construction that supports the concave spoke geometry and the machined face treatment in a single continuous form. Cast alloy handles complex face profiles well, and the one-piece build keeps the wheel structurally consistent from hub to barrel. At 41.67 lbs, the weight is in line with what a 20-inch truck wheel of this design calls for. Backspacing measures 5.71 inches.\u003c\/p\u003e\u003cp\u003eOffset and Stance on Your Build\u003c\/p\u003e\u003cp\u003eAt +18mm offset, the mounting surface sits forward of the wheel's centerline, positioning the wheel closer to the vehicle's face side. On Wrangler and full-size truck platforms, this offset keeps the wheel tucked within the fender arch for a clean, controlled stance rather than an outboard push. The 20x9 size works across stock, leveled, and lifted setups, and the IMS is also offered in additional sizes, widths, and finishes across the KMC lineup to match different build directions.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e18 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5.71\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e71.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eMachined Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e3700 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e45.67 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"KMC","offers":[{"title":"Default Title","offer_id":68713121186073,"sku":"KM552DB20905018","price":475.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/km552_machinedblack_white__15330.jpg?v=1794773052"},{"product_id":"18x9-silver-machined-wheel-km552-ims-6x5-5-30-km552sd18906830","title":"KM552 Ims Silver Machined | 18x9 | 6x5.5 +30mm Offset | KM552SD18906830","description":"\u003cp\u003eBuilt for the 6x139.7 Platform\u003c\/p\u003e\u003cp\u003eThe Chevrolet Silverado 1500, GMC Sierra 1500, Toyota Tacoma, Toyota Tundra, and Chevrolet K1500 are the core platforms for the KMC KM552 IMS, and the 6x139.7 (6x5.5) bolt pattern extends fitment across 114 verified applications in total, covering 10 additional platforms beyond those five. The 106.1mm hub bore fits these GM and Toyota full-size and mid-size truck platforms. At 18x9 with a +30mm offset, the mounting surface sits forward of the wheel's centerline, keeping the wheel positioned closer to the vehicle's face for a tucked, clean stance that suits daily-driven trucks and builds that prioritize clearance.\u003c\/p\u003e\u003cp\u003eSplit Eight-Spoke Mesh Design\u003c\/p\u003e\u003cp\u003eThe KM552 IMS runs a split eight-spoke mesh layout across the face, with each pair of spokes branching outward from the hub in a tight, interlocking pattern that gives the wheel visual density without closing off the face entirely. The gloss silver finish covers the wheel body, while the spoke faces are machined to a brighter, contrasting tone that adds depth to the design. Lug hardware sits exposed around the hub bore, visible on the face and adding a purposeful, hardware-forward detail to the overall look. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eKMC builds the IMS as a one-piece cast alloy wheel, a construction that supports the complex split-spoke mesh geometry across the face without compromising structural integrity. Cast alloy handles the undercuts and layered spoke profiles that define this design, and the one-piece form keeps the wheel consistent from hub to barrel. The 3,700-lb load rating supports full-size truck payloads, and at 38.61 lbs, the wheel carries the structural depth the design demands. Backspacing measures 6.18 inches.\u003c\/p\u003e\u003cp\u003eFitment Across GM and Toyota Truck Builds\u003c\/p\u003e\u003cp\u003eSilverado 1500 and Sierra 1500 owners from 1999 through 2026 get a wheel sized for the platform's 6x139.7 bolt pattern, and the same applies to Toyota Tacoma (1995-2026) and Tundra (2000-2026) builds. The K1500 (1988-1999) rounds out the named platforms, and the full fitment universe spans 114 verified applications across GM, Toyota, and similar 6x139.7 truck platforms. The KM552 IMS is also offered in additional sizes, widths, and finish options across the lineup for builds with different fitment targets.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e30 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e6.18\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSilver Machined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e3700 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e38.61 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"KMC","offers":[{"title":"Default Title","offer_id":68713121480985,"sku":"KM552SD18906830","price":495.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/km552_silvermachined_white__87172.jpg?v=1794773053"},{"product_id":"17x8-5-black-wheel-km552-ims-5x5-10-km552mb17855010n","title":"KM552 Ims Black | 17x8.5 | 5x5 -10mm Offset | KM552MB17855010N","description":"\u003cp\u003eBuilt for the 5x127 Platform\u003c\/p\u003e\u003cp\u003eJeep Wrangler owners (2007-2026) will find the KMC KM552 IMS sized and offset for the platform's demands. The 5x127 (5x5) bolt pattern also fits the Jeep Grand Cherokee (1999-2026), Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), with 10 additional verified fits across the 5x127 universe. The 71.5mm hub bore fits these platforms, and the 2,500-lb load rating supports the payload demands of full-size truck and SUV applications.\u003c\/p\u003e\u003cp\u003eEight-Spoke Concave Design\u003c\/p\u003e\u003cp\u003eThe KM552 IMS runs eight spokes in a concave profile, giving the face visual depth that suits the proportions of a lifted Jeep or full-size truck build. Exposed lug hardware sits in a circle around the hub bore at the center of the face, adding a purposeful, hardware-forward look to the design. The gloss black lip contrasts against the matte black face, creating a two-tone effect that gives the wheel a finished, intentional appearance without relying on machining or milling. A center cap is included, covering the lug hardware when you want a cleaner look.\u003c\/p\u003e\u003cp\u003eOne-Piece Cast Alloy Construction\u003c\/p\u003e\u003cp\u003eKMC builds the IMS as a one-piece cast alloy wheel, a construction that supports the concave spoke geometry and deep profile this design calls for. Cast molds carry complex shapes, including the inward-sweeping spoke faces and contoured lip, in a single continuous structure. At 31.08 lbs, the wheel delivers the long-haul reliability cast alloy is known for across a wide range of truck and SUV applications. Backspacing measures 4.36 inches.\u003c\/p\u003e\u003cp\u003eOffset and Stance\u003c\/p\u003e\u003cp\u003eAt -10mm, the mounting surface sits rearward of the wheel's centerline, pushing the wheel outward relative to the hub. On a 17x8.5 wheel, this offset moves the face outboard for a stance that looks planted and deliberate on lifted Wrangler and truck builds. The KM552 IMS is also offered in additional sizes, widths, and finishes across the KMC lineup, covering a range of 5x127 and other bolt-pattern applications for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e8.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.36\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e71.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2500 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e35.08 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"KMC","offers":[{"title":"Default Title","offer_id":68713121579289,"sku":"KM552MB17855010N","price":374.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/km552_black_white__10050.jpg?v=1794773053"},{"product_id":"20x9-black-wheel-km552-ims-6x5-5-0-km552mb20906800","title":"KM552 Ims Black | 20x9 | 6x5.5 0mm Offset | KM552MB20906800","description":"\u003cp\u003eBuilt for the 6x139.7 Truck Platform\u003c\/p\u003e\u003cp\u003eThe KMC KM552 IMS lands on five of the most popular 6-lug truck platforms in the aftermarket: Chevrolet Silverado 1500 (1999-2026), GMC Sierra 1500 (2000-2026), Toyota Tacoma (1995-2026), Toyota Tundra (2000-2026), and Chevrolet K1500 (1988-1999), with 10 additional verified fits across the 6x139.7 (6x5.5) universe. The 106.10mm hub bore fits these platforms, and the 3,700-lb load rating supports the payload demands of full-size and mid-size truck builds alike.\u003c\/p\u003e\u003cp\u003eEight-Spoke Concave Design\u003c\/p\u003e\u003cp\u003eThe IMS carries eight spokes arranged in a concave profile, giving the face visual depth that flat designs simply do not produce. The finish is Matte Black across the face with a Gloss Black lip, a two-tone treatment that keeps the wheel looking intentional without relying on machining or contrast cuts. The gloss lip adds a subtle sheen at the outer edge while the matte face stays understated and resistant to showing fingerprints or road film. Lug hardware sits exposed on the face around the hub area, making the mounting hardware part of the visual rather than hiding it behind a cap. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Cast Alloy Construction\u003c\/p\u003e\u003cp\u003eKMC builds the IMS as a one-piece cast alloy wheel, a construction that supports the concave spoke geometry and deep profile this design demands. Cast molds handle complex shapes well, and the eight-spoke concave layout benefits from the continuous pour that keeps the spoke geometry consistent from hub to barrel. At 41.45 lbs, the wheel carries the structural integrity for truck-duty use across the full range of verified platforms.\u003c\/p\u003e\u003cp\u003eFitment Details for Your Build\u003c\/p\u003e\u003cp\u003eGM full-size truck owners running the Silverado 1500 or Sierra 1500 get a wheel sized for their platform across nearly three decades of production. Toyota Tacoma and Tundra owners share the same 6x139.7 bolt pattern, making the IMS a natural fit across both mid-size and full-size Toyota truck builds. At 20x9 with a 0mm offset, the mounting surface sits at the wheel's centerline, placing the barrel evenly between the inner and outer edges. Backspacing measures 5 inches. This centered position works across stock, leveled, and lifted setups without pushing the wheel dramatically inboard or outboard. The KM552 IMS is also offered in additional sizes, widths, and finish options across the broader KMC lineup for builds that need a different combination.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e3700 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e45.45 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"KMC","offers":[{"title":"Default Title","offer_id":68713121874201,"sku":"KM552MB20906800","price":470.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/km552_black_white__14075.jpg?v=1794773054"},{"product_id":"20x9-black-wheel-km552-ims-5x5-18-km552mb20905018","title":"KM552 Ims Black | 20x9 | 5x5 +18mm Offset | KM552MB20905018","description":"\u003cp\u003eBuilt for Jeep and Truck Platforms on 5x127\u003c\/p\u003e\u003cp\u003eJeep Wrangler owners (2007-2026) will find the KMC KM552 IMS sized and offset for their platform right out of the box. The 5x127 (5x5) bolt pattern also covers Jeep Grand Cherokee (1999-2026), Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), with 10 additional verified platforms in the fitment universe. The 71.5mm hub bore fits these applications, and the 3,700-lb load rating supports the demands of full-size truck and SUV use.\u003c\/p\u003e\u003cp\u003eEight-Spoke Concave Design\u003c\/p\u003e\u003cp\u003eThe IMS runs eight spokes in a concave profile, giving the face visual depth that flat designs simply do not produce. The finish is Matte Black with a Gloss Black lip, a two-tone treatment that keeps the look intentional without relying on machining or contrast metallic tones. The gloss lip frames the concave face and adds a subtle sheen against the matte spokes. Lug hardware sits exposed on the face around the hub area, making the mounting hardware a visible part of the wheel's overall look rather than hiding it behind a cap. A center cap is included.\u003c\/p\u003e\u003cp\u003eOne-Piece Cast Alloy Construction\u003c\/p\u003e\u003cp\u003eKMC builds the IMS as a one-piece cast alloy wheel, a construction that supports the concave spoke geometry and deep profile this design demands. Cast molds carry complex shapes, including the IMS's inward-sweeping spoke faces and contoured barrel, in a single continuous structure. At 41.67 lbs, the wheel sits within the expected weight range for this size and construction. The one-piece build keeps the structural integrity intact across the full load cycle, which matters on platforms like the Wrangler that see varied terrain and payload demands.\u003c\/p\u003e\u003cp\u003eOffset and Fitment Details\u003c\/p\u003e\u003cp\u003eThe +18mm offset positions the mounting surface forward of the wheel's centerline, keeping the wheel tucked closer to the suspension components rather than pushing outward. On a 9-inch-wide wheel, this offset suits builds that want a clean, controlled stance without aggressive outboard positioning. Backspacing measures 5.71 inches. This wheel is also offered in additional sizes and finishes across the KM552 IMS lineup, so if this specific combination does not match your build, other options are available within the model.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e18 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5.71\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e71.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e3700 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e45.67 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"KMC","offers":[{"title":"Default Title","offer_id":68713122005273,"sku":"KM552MB20905018","price":475.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/km552_black_white__29676.jpg?v=1794773054"},{"product_id":"17x8-5-silver-machined-wheel-km552-ims-5x5-10-km552sd17855010n","title":"KM552 Ims Silver Machined | 17x8.5 | 5x5 -10mm Offset | KM552SD17855010N","description":"\u003cp\u003eJeep and Truck Fitment on the 5x127 Pattern\u003c\/p\u003e\u003cp\u003eJeep Wrangler owners (2007-2026) get a wheel sized and offset for the platform's wide stance and lifted builds. The KMC KM552 IMS also fits the Jeep Grand Cherokee (1999-2026), Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), covering 32 verified fitments across the 5x127 (5x5) bolt pattern. The 71.5mm hub bore fits these platforms, and the 2,500-lb load rating supports the demands of full-size truck and SUV applications.\u003c\/p\u003e\u003cp\u003eSplit-Spoke Mesh Design with Exposed Lugs\u003c\/p\u003e\u003cp\u003eThe IMS runs a split eight-spoke mesh layout across the face, with each spoke divided into two tines that fan outward from the hub toward the outer edge. The open mesh geometry gives the wheel visual depth and a purposeful, off-road-ready character that suits lifted Jeep and truck builds. Lug hardware sits exposed around the hub bore, visible on the face as part of the design rather than hidden behind a cap. The outer lip adds profile to the barrel, and the 4.36 inches of backspacing positions the mounting surface appropriately for the platform. A center cap is included.\u003c\/p\u003e\u003cp\u003eGloss Silver with Machined Spoke Faces\u003c\/p\u003e\u003cp\u003eThe finish is a gloss silver base with the spoke faces machined to a brighter, contrasting tone. The machined surfaces cut through the silver to expose the aluminum beneath, creating a two-tone effect that gives the mesh pattern more visual definition. The contrast between the gloss silver areas and the machined spoke faces keeps the wheel looking sharp across a range of truck colors and trim levels.\u003c\/p\u003e\u003cp\u003eReal Beadlock Ring, One-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eThe IMS is built as a one-piece alloy wheel and features a real beadlock ring. The beadlock mechanically clamps the tire bead to the wheel, allowing reduced tire pressure for improved traction on loose terrain without risking a tire unseating from the barrel. One-piece alloy construction keeps the design structurally sound across the full wheel, from hub to barrel, and the cast form supports the complex split-spoke mesh geometry without compromising the face detail. At 35.08 lbs, the weight reflects the real beadlock hardware and the wide 8.5-inch barrel.\u003c\/p\u003e\u003cp\u003eOffset and Stance Details\u003c\/p\u003e\u003cp\u003eThe -10mm offset places the mounting surface slightly rearward of the wheel's centerline, pushing the face outward relative to a zero-offset wheel. On Wrangler and Grand Cherokee platforms, this positions the wheel with a modest outboard presence that complements lifted setups. The KM552 IMS is also offered in additional sizes, finishes, and bolt patterns across the lineup for builds with different fitment needs.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e8.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.36\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e71.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSilver Machined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2500 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e35.08 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"KMC","offers":[{"title":"Default Title","offer_id":68713122332953,"sku":"KM552SD17855010N","price":449.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/km552_silvermachined_white__81398.jpg?v=1794773055"},{"product_id":"20x9-silver-machined-wheel-km552-ims-6x5-5-0-km552sd20906800","title":"KM552 Ims Silver Machined | 20x9 | 6x5.5 0mm Offset | KM552SD20906800","description":"\u003cp\u003eBuilt for the 6x139.7 Platform\u003c\/p\u003e\u003cp\u003eThe Chevrolet Silverado 1500, GMC Sierra 1500, Toyota Tacoma, Toyota Tundra, and Chevrolet K1500 all share the 6x139.7 (6x5.5) bolt pattern, and the KMC KM552 IMS is sized and drilled to fit them. At 20x9 with a 0mm offset, the mounting surface sits exactly at the wheel's centerline, placing the barrel evenly between the inner and outer edges for a balanced, tucked-to-flush stance across these full-size and mid-size truck platforms. The 106.1mm hub bore fits the 6x139.7 platform family, and the 3,700-lb load rating supports the payload and towing demands these trucks are built for. Beyond the five platforms named here, this wheel spans 114 verified fits across the 6x139.7 universe.\u003c\/p\u003e\u003cp\u003eEight-Spoke Design with Machined Detail\u003c\/p\u003e\u003cp\u003eEight spokes radiate from the hub in a concave profile, giving the IMS visual depth without overcomplicating the face. The gloss silver surfaces contrast against the machined spoke faces, where the aluminum has been cut to a brighter, more reflective finish. That two-tone result keeps the wheel looking sharp on silver, white, and dark-colored trucks alike. Exposed lug hardware sits in a circle around the hub bore, adding a purposeful, hardware-forward look to the center of the wheel face. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Cast Alloy Construction\u003c\/p\u003e\u003cp\u003eKMC builds the IMS as a one-piece cast alloy wheel, a construction that supports the concave spoke geometry and the contoured face profile without compromising structural integrity. Cast alloy handles complex shapes well, and at a 3,700-lb load rating, this wheel is built to carry what full-size trucks actually haul. At 45.45 lbs, the weight reflects the wide barrel and the structural demands of a 20-inch truck wheel at this load rating. The IMS is also offered in additional sizes and finishes across the KM552 lineup for builds with different fitment targets.\u003c\/p\u003e\u003cp\u003eOffset and Backspacing Details\u003c\/p\u003e\u003cp\u003eThe 0mm offset on a 9-inch-wide barrel puts the mounting surface at the exact midpoint of the wheel. With 5 inches of backspacing, the inner edge sits 5 inches behind the mounting surface, keeping the wheel positioned within the fender arch on stock and leveled trucks running the 6x139.7 pattern. This is a truck-scaled combination that works across a wide range of build heights without requiring significant clearance work on most 6x139.7 applications.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSilver Machined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e3700 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e45.45 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"KMC","offers":[{"title":"Default Title","offer_id":68713122398489,"sku":"KM552SD20906800","price":545.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/km552_silvermachined_white__95523.jpg?v=1794773056"},{"product_id":"17x8-5-bronze-black-wheel-km552-ims-5x5-10-km552zb17855010n","title":"KM552 Ims Bronze Black | 17x8.5 | 5x5 -10mm Offset | KM552ZB17855010N","description":"\u003cp\u003eBuilt for the 5x127 Platform\u003c\/p\u003e\u003cp\u003eJeep Wrangler owners (2007-2026) will find the KMC KM552 IMS sized and offset for the platform's demands. The 5x127 (5x5) bolt pattern also fits the Jeep Grand Cherokee (1999-2026), Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), with 10 additional verified platforms in the fitment universe. The 71.5mm hub bore fits these applications, and the 2,500-lb load rating supports the payload demands of full-size truck and SUV builds.\u003c\/p\u003e\u003cp\u003eEight-Spoke Concave Design, Two-Tone Finish\u003c\/p\u003e\u003cp\u003eThe KM552 IMS runs eight spokes in a concave profile, giving the face visual depth that flat-spoke designs don't carry. The matte bronze surfaces contrast sharply against the gloss black lip, creating a two-tone look that suits lifted Jeep and truck builds without leaning on chrome or polished surfaces. Exposed lug hardware sits in a circle around the hub bore at the center of the face, adding a purposeful, hardware-forward detail to the overall look. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eKMC builds the IMS as a one-piece alloy wheel, a construction that supports the complex concave spoke geometry and two-tone finish in a single continuous form. One-piece cast alloy carries the deep spoke profile and contoured lip without seams or assembly hardware, and the construction's proven long-haul reliability makes it a practical choice for daily-driven Jeeps and trucks that see real use. At 31.08 lbs, the wheel sits comfortably within the expected weight range for this size and application.\u003c\/p\u003e\u003cp\u003eOffset and Fitment Details\u003c\/p\u003e\u003cp\u003eAt -10mm offset on an 8.5-inch-wide wheel, the mounting surface sits rearward of the wheel's centerline, positioning the face slightly outboard of stock. The 4.36 inches of backspacing works with the 5x127 platform's geometry, and the -10mm offset gives the stance a more planted, outboard presence without requiring aggressive fender work on most builds. This wheel is also offered in additional sizes, widths, and finish options across the KM552 IMS lineup to suit a range of build targets.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e8.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.36\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e71.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBronze Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2500 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e35.08 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"KMC","offers":[{"title":"Default Title","offer_id":68713122791705,"sku":"KM552ZB17855010N","price":374.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/km552_bronzeblack_white__89615.jpg?v=1794773057"},{"product_id":"18x9-machined-black-wheel-km552-ims-8x180-0-km552db18908800","title":"KM552 Ims Machined Black | 18x9 | 8x180 0mm Offset | KM552DB18908800","description":"\u003cp\u003eBuilt for GM Heavy-Duty Platforms\u003c\/p\u003e\u003cp\u003eThe Chevrolet Silverado 2500 HD and 3500 HD, GMC Sierra 2500 HD and 3500 HD, and GMC Sierra 3500 Classic (2007) are the home turf for the KMC KM552 IMS. The 8x180 bolt pattern is the defining fitment signature of GM's heavy-duty truck lineup from 2011 through 2026, and the 124.2mm hub bore fits these platforms. At 18x9 with a 0mm offset, the mounting surface sits exactly at the wheel's centerline, placing the barrel evenly split between inboard and outboard. The 5-inch backspacing reflects that centered position, and the 3,700-lb load rating supports the payload and towing demands these trucks are built for. One additional verified fit rounds out the 8x180 universe beyond the five platforms named here.\u003c\/p\u003e\u003cp\u003eEight-Spoke Design with Machined Detail\u003c\/p\u003e\u003cp\u003eThe KM552 IMS runs eight spokes with a concave face profile, giving the wheel visual depth that suits the scale of a heavy-duty truck. The finish is machined with a black lip: the face carries a machined surface that brings out the aluminum's natural brightness, while the outer lip is finished in black for contrast. Exposed lug hardware sits in a circle around the hub bore at the center of the face, visible against the machined surface and adding a purposeful, hardware-forward look to the design. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eKMC builds the IMS as a one-piece alloy wheel, a construction that has made cast aluminum the backbone of high-volume aftermarket wheel manufacturing. The one-piece form supports the concave spoke geometry and the machined face detail in a single continuous shape, keeping the design's depth and surface work intact through the load cycles a 3,700-lb-rated HD truck wheel sees. At 37.48 lbs, the weight is consistent with what an 18-inch, 8-lug heavy-duty wheel carries.\u003c\/p\u003e\u003cp\u003eFitment Across the GM HD Lineup\u003c\/p\u003e\u003cp\u003eSilverado 2500 HD and 3500 HD owners running the 2011-and-newer platform get a wheel sized and rated for the job. The same applies to Sierra 2500 HD and 3500 HD trucks across the same generation window. The 0mm offset keeps the wheel centered in the fender arch without pushing aggressively outboard, making this a clean, balanced fitment for stock-height and leveled HD builds alike. The KM552 IMS is also offered in additional sizes and finishes across the KMC lineup for builds with different fitment targets.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e8x180\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e124.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eMachined Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e3700 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e41.48 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"KMC","offers":[{"title":"Default Title","offer_id":68713122857241,"sku":"KM552DB18908800","price":420.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/km552_machinedblack_white__45530.jpg?v=1794773057"},{"product_id":"17x8-5-bronze-black-wheel-km552-ims-5x5-25-km552zb17855025","title":"KM552 Ims Bronze Black | 17x8.5 | 5x5 +25mm Offset | KM552ZB17855025","description":"\u003cp\u003eBuilt for the 5x127 Platform\u003c\/p\u003e\u003cp\u003eJeep Wrangler owners (2007-2026) will find the KMC KM552 IMS sized and offset for their platform right out of the box. The 5x127 (5x5) bolt pattern also fits Jeep Grand Cherokee (1999-2026), Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), with 10 additional verified platforms in the fitment universe. The 71.5mm hub bore fits these applications, and the 3,700-lb load rating supports the demands of a loaded Wrangler or full-size SUV. At 5.73 inches of backspacing, the mounting surface positions the wheel for a composed, truck-appropriate stance on these platforms.\u003c\/p\u003e\u003cp\u003eEight-Spoke Concave Design, Two-Tone Finish\u003c\/p\u003e\u003cp\u003eThe KM552 IMS runs eight spokes in a concave profile, giving the face visual depth that flat designs simply do not deliver. The two-tone finish pairs a matte bronze face with a gloss black lip, creating a contrast that suits builds looking for something beyond the standard black-on-black. The gloss black lip frames the concave face cleanly, and the exposed lug hardware sits in a circle around the hub bore, adding a purposeful, hardware-forward detail to the center of the wheel. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Cast Alloy Construction\u003c\/p\u003e\u003cp\u003eKMC builds the IMS as a one-piece cast alloy wheel, a construction that supports the complex concave spoke geometry and two-tone finish this design demands. Cast molds allow the deep spoke profile and contoured lip to come out of a single continuous pour, keeping the structural shape intact across the full load cycle. At 32.85 lbs, the IMS carries the weight expected of a one-piece alloy wheel at this diameter, with the proven long-haul reliability that has made cast construction the backbone of the aftermarket wheel market.\u003c\/p\u003e\u003cp\u003eOffset and Fitment Details\u003c\/p\u003e\u003cp\u003eThe +25mm offset places the mounting surface forward of the wheel's centerline, positioning the wheel inward relative to the fender arch. On Wrangler and Grand Cherokee platforms, this keeps the wheel tucked appropriately within the factory fender geometry, which suits both stock-height and lifted setups. At 17x8.5 inches, the IMS is sized for the tire fitments common to these platforms. The KM552 IMS is also offered in additional sizes, widths, and finishes across the lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e8.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e25 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5.73\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e71.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBronze Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e3700 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e36.85 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"KMC","offers":[{"title":"Default Title","offer_id":68713123283225,"sku":"KM552ZB17855025","price":374.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/km552_bronzeblack_white__89148.jpg?v=1794773058"},{"product_id":"18x9-silver-machined-wheel-km552-ims-8x180-0-km552sd18908800","title":"KM552 Ims Silver Machined | 18x9 | 8x180 0mm Offset | KM552SD18908800","description":"\u003cp\u003eBuilt for GM Heavy-Duty Platforms\u003c\/p\u003e\u003cp\u003eThe Chevrolet Silverado 2500 HD and 3500 HD, GMC Sierra 2500 HD and 3500 HD, and GMC Sierra 3500 Classic (2007) are the home turf for the KMC KM552 IMS. The 8x180 bolt pattern is the defining fitment signature of GM's heavy-duty full-size trucks, and this 18x9 wheel is sized and rated to match what those platforms demand. The 124.2mm hub bore fits these GM HD applications, and the 3,700-lb load rating supports the towing and payload work these trucks are built for. One additional verified platform rounds out the fitment universe beyond the five named here.\u003c\/p\u003e\u003cp\u003eEight-Spoke Design with Machined Detail\u003c\/p\u003e\u003cp\u003eEight spokes radiate from the hub in a clean, symmetrical layout with a concave profile that gives the face visual depth. The gloss silver surfaces contrast against the machined spoke faces, where the aluminum has been cut to a brighter, more reflective finish. That two-tone result keeps the wheel looking purposeful on a working HD truck without leaning into anything flashy. Exposed lug hardware sits in a circle around the hub bore, visible on the face and adding a functional, hardware-forward look to the overall design. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eKMC builds the IMS as a one-piece alloy wheel, a construction that suits the KM552's wide distribution and consistent-quality reputation across KMC's truck lineup. One-piece cast alloy supports the complex spoke geometry and concave profile in a single continuous shape, and the 3,700-lb load rating reflects the structural demands of HD truck applications. At 41.48 lbs, the weight reflects the combination of an 18-inch diameter, a full 9-inch width, and the structural depth required to carry that load rating reliably.\u003c\/p\u003e\u003cp\u003eOffset and Stance on the HD Chassis\u003c\/p\u003e\u003cp\u003eA 0mm offset places the mounting surface exactly at the wheel's centerline, splitting the 9-inch barrel evenly between inboard and outboard. On GM HD trucks, that geometry puts the wheel face in a neutral, flush position relative to the fender. Backspacing measures 5 inches. This is a truck-scaled combination that works across stock, leveled, and lifted HD setups without pushing the wheel aggressively outboard or tucking it inward.\u003c\/p\u003e\u003cp\u003eFinish and Availability\u003c\/p\u003e\u003cp\u003eThe Gloss Silver with Machined Spoke Faces finish is a durable, low-maintenance choice for a truck that sees real use. The KM552 IMS is also offered in additional sizes and finish options across the broader KMC lineup, covering a range of configurations for GM HD builds.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e8x180\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e124.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSilver Machined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e3700 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e41.48 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"KMC","offers":[{"title":"Default Title","offer_id":68713123414297,"sku":"KM552SD18908800","price":495.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/km552_silvermachined_white__20675.jpg?v=1794773058"},{"product_id":"20x9-bronze-black-wheel-km552-ims-5x5-0-km552zb20905000","title":"KM552 Ims Bronze Black | 20x9 | 5x5 0mm Offset | KM552ZB20905000","description":"\u003cp\u003eJeep and Truck Fitment on the 5x127 Pattern\u003c\/p\u003e\u003cp\u003eThe Jeep Wrangler (2007-2026) is the natural home for the KMC KM552 IMS, and the 5x127 (5x5) bolt pattern confirms it. Grand Cherokee owners from 1999 through 2026 are equally covered, along with classic GM platforms including the Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), plus 10 additional verified applications across 32 total fitments. The 71.5mm hub bore fits these platforms, and the 3,700-lb load rating supports the demands of loaded Wrangler builds and full-size truck applications alike.\u003c\/p\u003e\u003cp\u003eEight-Spoke Design with Concave Depth\u003c\/p\u003e\u003cp\u003eEight spokes radiate from the hub in a clean, symmetrical layout with a concave profile that adds visual depth to the face. The exposed lug hardware sits in a circle around the hub bore, keeping the mounting hardware visible as part of the design rather than hiding it behind a cap. A center cap is included with this wheel. The gloss black outer lip frames the concave face and creates a sharp contrast against the matte bronze finish, giving the wheel a two-tone presence that suits the rugged character of Wrangler and truck builds.\u003c\/p\u003e\u003cp\u003eMatte Bronze with a Gloss Black Lip\u003c\/p\u003e\u003cp\u003eThe finish pairs a matte bronze face with a gloss black lip for a combination that works across a range of build directions. Matte bronze brings warmth and texture without the high-maintenance demands of a polished or chrome surface, while the gloss black lip sharpens the overall look. The two-tone treatment gives the KM552 IMS a distinct identity on the trail or on the street.\u003c\/p\u003e\u003cp\u003eOne-Piece Cast Alloy Construction\u003c\/p\u003e\u003cp\u003eKMC builds the KM552 IMS as a one-piece cast alloy wheel, a construction that supports the complex spoke geometry and concave face profile in a single continuous shape. Cast alloy carries the structural integrity needed for the 3,700-lb load rating while keeping the design's depth and detail intact through every load cycle. At 41.89 lbs, the wheel sits comfortably within the expected weight range for this size and application. The one-piece build also means there are no seams or hardware to maintain at the barrel.\u003c\/p\u003e\u003cp\u003eOffset and Backspacing Details\u003c\/p\u003e\u003cp\u003eAt 20x9 with a 0mm offset, the mounting surface sits exactly at the wheel's centerline, placing the barrel evenly split between inboard and outboard. Backspacing measures 5 inches. This centered position works well across stock, leveled, and lifted Wrangler and truck setups without pushing aggressively outboard or tucking the wheel inward. The KM552 IMS is also offered in additional sizes and finish options across the KMC lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e71.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBronze Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e3700 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e45.89 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"KMC","offers":[{"title":"Default Title","offer_id":68713123676441,"sku":"KM552ZB20905000","price":475.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/km552_bronzeblack_white__47912.jpg?v=1794773059"},{"product_id":"18x9-black-wheel-km552-ims-8x180-18-km552mb18908818","title":"KM552 Ims Black | 18x9 | 8x180 +18mm Offset | KM552MB18908818","description":"\u003cp\u003eBuilt for GM Heavy-Duty Platforms\u003c\/p\u003e\u003cp\u003eThe Chevrolet Silverado 2500 HD and 3500 HD, GMC Sierra 2500 HD and 3500 HD, and GMC Sierra 3500 Classic (2007) all run the 8x180 bolt pattern, and the KMC KM552 IMS is sized and drilled to match. At 18x9 with a +18mm offset, the mounting surface sits forward of the wheel's centerline, keeping the wheel positioned within the fender arch in a manner that suits the proportions of GM's heavy-duty platform. The 124.2mm hub bore fits these GM HD applications, and the 3,700-lb load rating supports the payload and towing demands that come with running a 2500 or 3500 series truck. A center cap is included. Beyond the five primary platforms listed, the KM552 IMS covers one additional verified fit in the 8x180 universe.\u003c\/p\u003e\u003cp\u003eEight-Spoke Concave Face, Two-Tone Finish\u003c\/p\u003e\u003cp\u003eThe IMS runs eight spokes in a concave profile, giving the face visual depth that flat designs don't carry. The two-tone finish pairs a matte black face with a gloss black lip, creating a tonal contrast that keeps the look intentional without relying on machining or polishing. Exposed lug hardware sits in a circle around the hub bore at the center of the wheel face, visible against the matte surface and adding a purposeful, hardware-forward detail to the overall look.\u003c\/p\u003e\u003cp\u003eOne-Piece Cast Alloy Construction\u003c\/p\u003e\u003cp\u003eKMC builds the IMS as a one-piece cast alloy wheel, a construction that has made cast the most widely used method in aftermarket wheel manufacturing for good reason. The cast process supports the concave spoke geometry and the defined outer lip in a single continuous form, holding the design's depth and contour through every load cycle. At 37.92 lbs, the IMS carries the structural integrity the 3,700-lb load rating demands across the full range of HD truck use.\u003c\/p\u003e\u003cp\u003eFitment Details for the HD Build\u003c\/p\u003e\u003cp\u003eWith a 5.71-inch backspacing and +18mm offset, the IMS positions the wheel face outward from the mounting surface in a way that suits the wide track of GM's heavy-duty chassis. The 8x180 pattern is exclusive to Chevy and GMC HD trucks from 2011 forward, so this wheel is purpose-built for that platform family. The KM552 IMS is also offered in additional sizes and configurations across the lineup for builds with different clearance or stance targets.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e8x180\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e18 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5.71\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e124.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e3700 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e41.92 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"KMC","offers":[{"title":"Default Title","offer_id":68713123774745,"sku":"KM552MB18908818","price":420.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/km552_black_white__87527.jpg?v=1794773059"},{"product_id":"17x8-5-matte-black-wheel-torx-5x5-0-km553mb17855000","title":"Torx Matte Black | 17x8.5 | 5x5 0mm Offset | KM553MB17855000","description":"\u003cp\u003eBuilt for Jeep and Truck Platforms on 5x127\u003c\/p\u003e\u003cp\u003eJeep Wrangler owners (2007-2026) will find the KMC Torx sized and drilled for their platform right out of the box. The 5x127 (5x5) bolt pattern also fits the Jeep Grand Cherokee (1999-2026), Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), with 10 additional verified platforms in the fitment universe. The 71.5mm hub bore fits these 5x127 applications, and the 2,650-lb load rating supports real-world truck and Jeep use. A center cap is included.\u003c\/p\u003e\u003cp\u003eSplit Six-Spoke Design with Simulated Beadlock\u003c\/p\u003e\u003cp\u003eThe Torx runs a split six-spoke layout with a concave face that gives the wheel visual depth from any angle. The lug hardware sits exposed around the hub bore, visible on the face and adding a purposeful, hardware-forward look to the build. A simulated beadlock ring wraps the outer edge, giving the wheel the rugged, trail-ready character that suits Wrangler and truck builds without the complexity of a functional beadlock. The gloss black lip contrasts the matte black face for a two-tone effect that keeps the design sharp and intentional.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eKMC builds the Torx as a one-piece alloy wheel, a construction that supports the complex split-spoke geometry and concave profile in a single continuous shape. Cast alloy handles the deep spoke profile and contoured face without compromise, and the proven long-haul reliability of this construction makes it a practical choice for daily-driven Jeeps and trucks alike. At 32.12 lbs, the Torx carries the structural integrity the 2,650-lb load rating demands.\u003c\/p\u003e\u003cp\u003eOffset and Fitment Details\u003c\/p\u003e\u003cp\u003eThe Torx runs a 0mm offset, placing the mounting surface exactly at the wheel's centerline. On a 17x8.5 barrel, that positions the wheel evenly split between inboard and outboard, with 4.75 inches of backspacing. This neutral offset suits a wide range of Jeep and truck builds without pushing aggressively outboard or tucking inboard. The Torx is also offered in additional sizes and finishes across the KMC lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e8.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.75\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e71.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eMatte Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2650 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e36.12 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"KMC","offers":[{"title":"Default Title","offer_id":68713124069657,"sku":"KM553MB17855000","price":374.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/torx_matteblack_white__80917.jpg?v=1794773060"},{"product_id":"18x9-machined-black-wheel-km552-ims-8x180-18-km552db18908818","title":"KM552 Ims Machined Black | 18x9 | 8x180 +18mm Offset | KM552DB18908818","description":"\u003cp\u003eBuilt for GM Heavy-Duty Platforms\u003c\/p\u003e\u003cp\u003eThe Chevrolet Silverado 2500 HD and 3500 HD, GMC Sierra 2500 HD and 3500 HD, and the GMC Sierra 3500 Classic (2007) are the home turf for the KMC KM552 IMS. The 8x180 bolt pattern is the defining fitment signature of GM's heavy-duty truck lineup, and this wheel is drilled specifically for it. The 124.2mm hub bore fits these GM HD platforms, and the 3,700-lb load rating is sized for the payload and towing demands that come with running a 2500 or 3500. Six total verified platforms are covered, with one additional fit beyond the primary five.\u003c\/p\u003e\u003cp\u003eEight-Spoke Design with Concave Depth\u003c\/p\u003e\u003cp\u003eThe KM552 IMS carries eight spokes arranged in a concave profile that pulls the face inward and gives the wheel visual depth from any angle. The machined spoke surfaces contrast against the black lip, creating a two-tone look that suits the scale of a heavy-duty truck without relying on chrome or polished excess. Lug hardware sits exposed around the hub bore on the wheel face, adding a purposeful, hardware-forward detail to the center of the design. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eKMC builds the IMS as a one-piece alloy wheel, a construction that has earned its place across the aftermarket by supporting complex face geometries, including the concave spoke profile and contoured lip this design relies on, within a single continuous casting. The result is a wheel that holds its structural integrity across the load cycles a working HD truck puts it through, at a price point that makes sense for a daily-driven work setup. At 37.92 lbs, the weight is consistent with what you'd expect from a one-piece alloy at this diameter and width.\u003c\/p\u003e\u003cp\u003eOffset and Fitment Details\u003c\/p\u003e\u003cp\u003eAt 18 inches in diameter and 9 inches wide with a +18mm offset, the mounting surface sits forward of the wheel's centerline, keeping the wheel positioned closer to the face side. The 5.71 inches of backspacing works within the wheel well geometry of GM HD trucks without requiring clearance modifications on stock or leveled setups. This is a wheel sized and offset for a clean, planted stance on a full-size heavy-duty platform. The KM552 IMS is also offered in additional sizes, widths, and finishes across the lineup for builds with different fitment targets.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e8x180\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e18 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5.71\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e124.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eMachined Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e3700 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e41.92 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"KMC","offers":[{"title":"Default Title","offer_id":68713124233497,"sku":"KM552DB18908818","price":420.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/km552_machinedblack_white__48718.jpg?v=1794773061"},{"product_id":"17x9-matte-black-wheel-torx-5x5-12-km553mb17905012n","title":"Torx Matte Black | 17x9 | 5x5 -12mm Offset | KM553MB17905012N","description":"\u003cp\u003eBuilt for the 5x127 Pattern\u003c\/p\u003e\u003cp\u003eJeep Wrangler owners (2007-2026) are the natural home for the KMC Torx, and the 5x127 (5x5) bolt pattern confirms it. The Grand Cherokee (1999-2026) fits as well, along with classic GM platforms including the Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), with 10 additional verified fits across the 5x127 universe. The 71.5mm hub bore fits these platforms, and the 2,650-lb load rating supports the demands of trail-ready and daily-driven builds alike.\u003c\/p\u003e\u003cp\u003eSplit Six-Spoke Design with Simulated Beadlock\u003c\/p\u003e\u003cp\u003eThe Torx runs a split six-spoke layout with a concave face, giving the wheel visual depth and a purposeful, aggressive character that suits lifted Jeep and truck builds. The lug hardware is exposed and visible around the hub area, adding a hardware-forward look that reinforces the wheel's off-road intent. A gloss black lip rings the outer edge, contrasting cleanly against the matte black face. The simulated beadlock ring adds a rugged, trail-inspired aesthetic without the weight or complexity of a functional beadlock setup. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eKMC builds the Torx as a one-piece alloy wheel, a construction that suits the wide distribution and consistent-quality reputation KMC has built across its truck and off-road lineup. One-piece alloy casting supports the complex geometry of the split-spoke design and concave profile in a single continuous structure, keeping the design's depth and detail intact across the full load cycle. At 32.34 lbs, the Torx carries the structural integrity for real-world use without unnecessary bulk.\u003c\/p\u003e\u003cp\u003eOffset and Fitment Details\u003c\/p\u003e\u003cp\u003eThe -12mm offset places the mounting surface rearward of the wheel's centerline, pushing the wheel slightly outboard of stock positioning for a more planted, aggressive stance. At 9 inches wide with a -12mm offset, this is a truck-scaled setup that works well on leveled and lifted builds. Backspacing measures 4.53 inches. The Torx is also offered in additional sizes, widths, and finishes across the lineup, covering a range of bolt patterns for other truck and SUV platforms.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.53\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e71.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eMatte Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2650 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e36.34 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"KMC","offers":[{"title":"Default Title","offer_id":68713124462873,"sku":"KM553MB17905012N","price":374.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/torx_matteblack_white__33992.jpg?v=1794773062"},{"product_id":"18x9-silver-machined-wheel-km552-ims-8x180-18-km552sd18908818","title":"KM552 Ims Silver Machined | 18x9 | 8x180 +18mm Offset | KM552SD18908818","description":"\u003cp\u003eBuilt for GM Heavy-Duty Platforms\u003c\/p\u003e\u003cp\u003eThe Chevrolet Silverado 2500 HD and 3500 HD, GMC Sierra 2500 HD and 3500 HD, and the GMC Sierra 3500 Classic (2007) all run the 8x180 bolt pattern, and the KMC KM552 IMS is drilled specifically for it. The 124.2mm hub bore fits these GM heavy-duty platforms, and the 3,700-lb load rating is sized for the payload and towing demands that come with running a 2500 or 3500 series truck. One additional verified platform rounds out the fitment universe beyond the five named here.\u003c\/p\u003e\u003cp\u003eSplit-Spoke Mesh Design with Exposed Hardware\u003c\/p\u003e\u003cp\u003eThe KM552 IMS carries a split eight-spoke mesh layout across the face, with each spoke dividing into two as it radiates outward from the hub. The design opens up the face with a layered, geometric depth that suits the scale of a heavy-duty truck build. Lug hardware sits exposed around the hub bore, visible on the face and adding a purposeful, hardware-forward look to the wheel. A center cap is included. The outer lip frames the barrel profile, and the machined spoke faces contrast against the gloss silver background for a two-tone finish that holds visual interest without relying on heavy chrome or polished surfaces.\u003c\/p\u003e\u003cp\u003eGloss Silver with Machined Spoke Faces\u003c\/p\u003e\u003cp\u003eThe finish is gloss silver across the wheel body, with the spoke faces machined to a brighter, reflective contrast. Machining removes material from the spoke surfaces to expose the raw aluminum beneath, creating a clean tonal shift between the painted areas and the machined zones. The result is a finish that works well on both stock-height and lifted GM HD builds without leaning into an overly aggressive or show-only aesthetic.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eKMC builds the KM552 IMS as a one-piece alloy wheel, a construction that has made cast aluminum the backbone of the aftermarket wheel industry. The one-piece form supports the split-spoke mesh geometry in a single continuous shape, keeping the face's layered detail intact through the structural demands of heavy-duty truck use. At 41.92 lbs, the weight reflects the 18x9 size, the 3,700-lb load rating, and the material volume that comes with a wheel built to handle HD payloads. The 5.71 inches of backspacing and +18mm offset place the mounting surface forward of the wheel's centerline, positioning the wheel closer to the vehicle's hub face for a fitment profile suited to these GM HD applications.\u003c\/p\u003e\u003cp\u003eFitment Across the GM HD Lineup\u003c\/p\u003e\u003cp\u003eThe KM552 IMS fits the Silverado 2500 HD and 3500 HD from 2011 through 2026, the Sierra 2500 HD and 3500 HD across the same window, and the Sierra 3500 Classic from 2007. The KM552 IMS is also offered in additional sizes, widths, and finishes across the broader KMC lineup for builds with different fitment targets.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e8x180\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e18 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5.71\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e124.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSilver Machined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e3700 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e41.92 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"KMC","offers":[{"title":"Default Title","offer_id":68713124626713,"sku":"KM552SD18908818","price":495.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/km552_silvermachined_white__30409.jpg?v=1794773062"},{"product_id":"17x8-5-matte-black-wheel-km554-aztec-5x5-0-km554mb17855000","title":"KM554 Aztec Matte Black | 17x8.5 | 5x5 0mm Offset | KM554MB17855000","description":"\u003cp\u003eBuilt for the 5x127 Platform\u003c\/p\u003e\u003cp\u003eJeep Wrangler owners (2007-2026) will recognize the KM554 Aztec immediately as a wheel sized and styled for their platform. The 5x127 (5x5) bolt pattern also fits the Jeep Grand Cherokee (1999-2026), Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), with 10 additional verified fits across the 5x127 universe. The 71.5mm hub bore fits these platforms, and the 2,650-lb load rating supports the demands of trail-ready and daily-driven builds alike.\u003c\/p\u003e\u003cp\u003eSimulated Beadlock Styling, Concave Face\u003c\/p\u003e\u003cp\u003eThe KMC Aztec carries a matte black finish across the face with a gloss black simulated beadlock ring at the outer edge, creating a two-tone contrast that suits the aggressive character of Wrangler and truck builds. The concave face adds visual depth, pulling the center of the wheel back while the outer ring sits forward. Exposed lug hardware sits in a circle around the hub bore, visible on the face and adding to the utilitarian, trail-focused look. A center cap is included with this wheel, covering the hub area when the exposed lug aesthetic is not the goal. The multi-spoke split design radiates outward from the hub, and the outer lip frames the overall profile.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eThe Aztec is cast in one-piece alloy, a construction that supports the complex geometry this design demands: the concave face, the simulated beadlock ring, and the multi-spoke split layout all come from a single continuous pour. Cast alloy handles the detailed shaping of this face profile well, and the one-piece structure keeps the wheel consistent through load cycles on and off pavement. At 32.1 lbs and 4.75 inches of backspacing, the wheel sits with the mounting surface at the centerline, a true zero offset that positions the wheel evenly across the hub.\u003c\/p\u003e\u003cp\u003eOffset and Fitment Details\u003c\/p\u003e\u003cp\u003eAt 0mm offset, the mounting surface sits exactly at the wheel's centerline, splitting the 8.5-inch width evenly between inboard and outboard. This neutral positioning works across a range of Wrangler and truck builds without pushing aggressively outboard or tucking inboard. The 4.75 inches of backspacing reflects that centered mount. For Wrangler builds running a lift kit, the zero offset pairs well with wider tires and the added clearance a lift provides. The KM554 Aztec is also offered in additional sizes and configurations across the KMC lineup to suit different build directions.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e8.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.75\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e71.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eMatte Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2650 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e36.1 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"KMC","offers":[{"title":"Default Title","offer_id":68713124823321,"sku":"KM554MB17855000","price":374.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/km554_matteblack_white__90310.jpg?v=1794773063"},{"product_id":"20x9-machined-black-wheel-km552-ims-8x180-0-km552db20908800","title":"KM552 Ims Machined Black | 20x9 | 8x180 0mm Offset | KM552DB20908800","description":"\u003cp\u003eBuilt for GM Heavy-Duty Platforms\u003c\/p\u003e\u003cp\u003eThe Chevrolet Silverado 2500 HD and 3500 HD, GMC Sierra 2500 HD and 3500 HD, and GMC Sierra 3500 Classic (2007) all run the 8x180 bolt pattern, and the KMC KM552 IMS is sized and drilled specifically for that platform family. At 20x9 with a 0mm offset, the mounting surface sits exactly at the wheel's centerline, placing the wheel in a neutral, balanced position relative to the fender. The 124.2mm hub bore fits these GM heavy-duty applications, and the 3,700-lb load rating is built to handle the payload and towing demands that come with running a 2500 or 3500 series truck. One additional verified fit rounds out the 8x180 universe beyond the five platforms named here.\u003c\/p\u003e\u003cp\u003eEight-Spoke Design with Concave Depth\u003c\/p\u003e\u003cp\u003eThe KM552 IMS carries eight spokes with a concave face profile that pulls the center of the wheel back, adding visual depth to the design. The machined finish across the face contrasts against the black lip, giving the wheel a two-tone look that suits the scale of a heavy-duty build. Lug hardware sits exposed on the face around the hub bore, visible in a circle at the center of the wheel where it mounts to the vehicle. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eKMC builds the IMS as a one-piece alloy wheel, a construction that supports the complex concave geometry and multi-surface finish work the design calls for. Cast alloy molds support the deep spoke profile and contoured face in a single continuous shape, and the one-piece structure keeps the finish consistent from hub to barrel. At 42.33 lbs, the wheel carries the structural integrity expected for HD-payload applications.\u003c\/p\u003e\u003cp\u003eFinish Details That Define the Look\u003c\/p\u003e\u003cp\u003eThe finish on this wheel is Machined with a Black Lip: the spoke faces and central areas carry a machined finish that exposes the aluminum's natural brightness, while the outer lip is finished in black for a sharp contrast at the wheel's edge. The machined surfaces are cut to a consistent sheen across the face, and the black lip frames the profile cleanly against the barrel. This finish combination suits the visual character of lifted heavy-duty builds where contrast and scale both matter.\u003c\/p\u003e\u003cp\u003eFitment Across the HD Lineup\u003c\/p\u003e\u003cp\u003eThe 8x180 pattern is exclusive to GM's heavy-duty truck lineup, and this wheel is verified across the Silverado and Sierra 2500 HD and 3500 HD from 2011 through 2026. The 0mm offset and 5-inch backspacing place the wheel in a position that works with the wide track of these platforms. The KM552 IMS is also offered in additional sizes and finish options for builds that need a different spec.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e8x180\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e124.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eMachined Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e3700 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e46.33 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"KMC","offers":[{"title":"Default Title","offer_id":68713125085465,"sku":"KM552DB20908800","price":470.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/km552_machinedblack_white__94581.jpg?v=1794773063"},{"product_id":"17x8-5-matte-black-wheel-km555-attack-5x5-10-km555mx17855010n","title":"KM555 Attack Matte Black | 17x8.5 | 5x5 -10mm Offset | KM555MX17855010N","description":"\u003cp\u003eBuilt for Jeep and Truck Platforms\u003c\/p\u003e\u003cp\u003eJeep Wrangler owners (2007-2026) get a wheel sized and drilled for their platform right out of the box. The KMC KM555 Attack runs the 5x127 (5x5) bolt pattern, covering Jeep Grand Cherokee (1999-2026), Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), GMC Yukon (1992-1999), and 10 additional verified platforms across 32 total fitments. The 71.5mm hub bore fits these applications, and the 2,650-lb load rating supports the demands of truck and SUV use.\u003c\/p\u003e\u003cp\u003eSplit Multi-Spoke Design, Exposed Hardware\u003c\/p\u003e\u003cp\u003eThe Attack's face runs a split multi-spoke layout that opens up the disc with layered depth and visual complexity. Each split spoke branches outward from the hub, giving the wheel a structured, purposeful look that suits lifted Jeep and truck builds. Lug hardware sits exposed around the hub bore on the wheel face, making the mounting hardware a visible part of the design rather than hiding it behind a cap. A center cap is included with this wheel. The outer lip adds profile to the 8.5-inch barrel, and the matte black finish holds its look through trail dust, road film, and seasonal wear without demanding extra upkeep.\u003c\/p\u003e\u003cp\u003eOne-Piece Cast Alloy Construction\u003c\/p\u003e\u003cp\u003eKMC builds the Attack as a one-piece cast alloy wheel, a construction that supports the complex split-spoke geometry and deep face profile this design calls for. Cast molds handle the layered spoke branching and contoured surfaces in a single continuous shape, keeping the structural integrity intact across the full load cycle. At 30.42 lbs, the Attack delivers reliable long-haul value that has made cast alloy the most-used construction in the aftermarket wheel segment.\u003c\/p\u003e\u003cp\u003eOffset and Fitment Details\u003c\/p\u003e\u003cp\u003eThe -10mm offset places the mounting surface slightly rearward of the wheel's centerline, pushing the wheel outward relative to a zero-offset position. On Jeep Wrangler and similar 5x127 platforms, this positions the wheel face with a modest outboard presence that suits leveled and lifted setups. Backspacing measures 4.36 inches. The Attack is also offered in additional sizes and finishes across the KM555 lineup, so other configurations are available if this size does not match your build.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e8.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.36\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e71.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eMatte Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2650 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e34.42 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"KMC","offers":[{"title":"Default Title","offer_id":68713125249305,"sku":"KM555MX17855010N","price":374.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/km555_matteblack_white__06938.jpg?v=1794773064"},{"product_id":"17x8-5-matte-black-wheel-km554-aztec-6x5-5-25-km554mb17856825","title":"KM554 Aztec Matte Black | 17x8.5 | 6x5.5 +25mm Offset | KM554MB17856825","description":"\u003cp\u003eBuilt for the 6x139.7 Platform\u003c\/p\u003e\u003cp\u003eThe KMC KM554 Aztec lands on one of the most widely used 6-lug truck patterns in the aftermarket: 6x139.7 (6x5.5). Verified fitment covers the Chevrolet Silverado 1500 (1999-2026), GMC Sierra 1500 (2000-2026), Toyota Tacoma (1995-2026), Toyota Tundra (2000-2026), and Chevrolet K1500 (1988-1999), with 10 additional verified platforms across 114 total fitments. The 106.1mm hub bore fits these platforms, and the 2,650-lb load rating supports real-world truck use across daily-driven and weekend builds alike.\u003c\/p\u003e\u003cp\u003eSimulated Beadlock Style, Concave Face\u003c\/p\u003e\u003cp\u003eThe Aztec's defining visual is its gloss black simulated beadlock ring set against the matte black face, giving the wheel a two-tone contrast that suits builds looking for an off-road-influenced aesthetic without the weight or complexity of a functional beadlock. The face runs a multi-spoke split design with a concave profile, pulling the center inward for visual depth. Exposed lug hardware sits in a circle around the hub bore, visible on the face and adding to the tactical, hardware-forward look. An outer lip frames the barrel, and a center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eKMC builds the Aztec as a one-piece alloy wheel, a construction that has made cast aluminum the backbone of the aftermarket for good reason. The single-piece form supports the Aztec's concave face geometry and simulated beadlock ring in a continuous, structurally sound shape. At 30.58 lbs, the wheel carries the mass you'd expect from a 17-inch truck wheel with this level of face detail. KMC's broad manufacturing experience across street, truck, and off-road segments means consistent quality across the lineup.\u003c\/p\u003e\u003cp\u003eOffset and Fitment Details\u003c\/p\u003e\u003cp\u003eAt 17x8.5 with a +25mm offset, the mounting surface sits forward of the wheel's centerline, keeping the wheel positioned closer to the vehicle's face. The 5.73 inches of backspacing places the inner edge of the barrel with clearance in mind for lifted and leveled truck setups. This size and offset combination suits trucks running leveling kits or moderate lift kits where a clean, tucked-to-flush stance is the goal. The Aztec is also offered in additional sizes and configurations across the KMC lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e8.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e25 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5.73\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eMatte Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2650 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e34.58 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"KMC","offers":[{"title":"Default Title","offer_id":68713125511449,"sku":"KM554MB17856825","price":370.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/km554_matteblack_white__68310.jpg?v=1794773064"},{"product_id":"17x8-5-black-gray-wheel-km718-summit-5x5-0-km71878550400","title":"KM718 Summit Black Gray | 17x8.5 | 5x5 0mm Offset | KM71878550400","description":"\u003cp\u003eBuilt for the 5x127 Platform\u003c\/p\u003e\u003cp\u003eJeep Wrangler owners (2007-2026) and Jeep Grand Cherokee drivers (1999-2026) are the natural home for the KMC KM718 Summit, and the 5x127 (5x5) bolt pattern confirms it. This 17x8.5 wheel also fits Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), with 10 additional verified platforms rounding out the fitment universe. The 71.5mm hub bore fits these applications, and the 2,500-lb load rating supports the demands of truck and SUV builds across the lineup.\u003c\/p\u003e\u003cp\u003eSplit Six-Spoke Design with Exposed Hardware\u003c\/p\u003e\u003cp\u003eThe KM718 Summit runs a split six-spoke layout with a concave face profile that gives the wheel visual depth from any angle. Rivets accent the design, adding a hardware-forward detail that suits the rugged character of Jeep and truck builds. Lug hardware sits exposed around the hub bore at the center of the face, visible once mounted and contributing to the purposeful, mechanical look the Summit is built around. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eSatin Black with Gray Tint Finish\u003c\/p\u003e\u003cp\u003eThe Satin Black with Gray Tint finish gives the KM718 Summit a subdued but layered appearance. The satin surface avoids the high-maintenance demands of gloss or chrome, while the gray tint adds dimension to the face without competing with the wheel's structural geometry. It suits builds running earth tones, matte body colors, or any setup where the wheel is meant to complement rather than dominate the overall look.\u003c\/p\u003e\u003cp\u003eOne-Piece Cast Construction\u003c\/p\u003e\u003cp\u003eKMC builds the KM718 Summit as a one-piece cast alloy wheel, a construction that supports the Summit's complex split-spoke geometry and concave profile in a single continuous shape. Cast aluminum handles the deep spoke contours and the concave face without requiring assembly, and the proven construction delivers reliable long-haul value for daily-driven Jeep and truck applications. At 27.15 lbs, the Summit comes in at a competitive weight for its class.\u003c\/p\u003e\u003cp\u003eOffset and Backspacing Details\u003c\/p\u003e\u003cp\u003eThe 0mm offset places the mounting surface exactly at the wheel's centerline, a neutral position that works across stock, leveled, and lifted setups on 5x127 platforms. Backspacing measures 4.75 inches. This wheel is also offered in additional sizes, finishes, and bolt patterns across the KM718 Summit lineup.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e8.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.75\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e71.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack Gray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2500 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e31.15 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"KMC","offers":[{"title":"Default Title","offer_id":68713125609753,"sku":"KM71878550400","price":374.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/km718_blackgray_white__36565.jpg?v=1794773065"},{"product_id":"20x9-silver-machined-wheel-km552-ims-8x6-5-0-km552sd20908000","title":"KM552 Ims Silver Machined | 20x9 | 8x6.5 0mm Offset | KM552SD20908000","description":"\u003cp\u003eHeavy-Duty Platforms, Proven Fitment\u003c\/p\u003e\u003cp\u003eRam 2500 owners from 1994 through the current generation get a wheel sized and drilled for their platform. The KMC KM552 IMS runs the 8x165.1 (8x6.5) bolt pattern with a 125.1mm hub bore that fits Ram 2500 and Ram 3500 applications, Chevrolet Silverado 2500 HD and GMC Sierra 2500 HD (2001-2010), and the Dodge Ram 1500 (2006-2008), among 15 total verified platforms. At 20x9 with a 0mm offset, the mounting surface sits exactly at the wheel's centerline, placing the wheel in a neutral position relative to the hub. That centered stance suits HD truck builds running stock or leveled setups where a clean, upright wheel position is the goal. The 3,700-lb load rating supports the payload and towing demands that come with heavy-duty truck ownership.\u003c\/p\u003e\u003cp\u003eSplit-Spoke Mesh Design with Exposed Hardware\u003c\/p\u003e\u003cp\u003eThe KM552 IMS carries a split eight-spoke mesh layout across the face, with each spoke dividing into two tines as it moves outward from the hub. The mesh pattern opens up the face with negative space between each split spoke pair, giving the wheel visual depth without adding decorative clutter. Lug hardware sits exposed in a circle around the hub bore, visible on the face and adding an intentional industrial character to the overall look. The outer lip frames the profile, and a center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eGloss Silver with Machined Spoke Faces\u003c\/p\u003e\u003cp\u003eThe finish is gloss silver across the wheel body, with the spoke faces machined to a brighter, reflective contrast. That two-tone result gives the KM552 IMS a layered appearance: the silver surfaces provide a clean backdrop while the machined spoke faces draw the eye across the design. The combination suits builds that want a polished, finished look without going full chrome or full black.\u003c\/p\u003e\u003cp\u003eReal Beadlock and One-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eThe KM552 IMS is built as a one-piece alloy wheel with a real beadlock ring. One-piece cast construction supports complex face geometry like the split-spoke mesh layout, keeping the design's depth and detail intact through the full load cycle. Cast alloy has earned its place in the aftermarket through proven strength and long-haul reliability, and at 45.89 lbs this wheel carries the structural integrity the 3,700-lb load rating demands. The real beadlock ring adds functional capability for builds that need it. Backspacing measures 5 inches.\u003c\/p\u003e\u003cp\u003eBuild Range and Availability\u003c\/p\u003e\u003cp\u003eThe KM552 IMS is part of KMC's broad lineup, available across multiple sizes, widths, and finishes to cover a range of HD truck builds. This 20x9 silver machined version fits 15 verified platforms across the 8x165.1 (8x6.5) bolt-pattern universe, including the Ram 2500 (1994-2027), Silverado 2500 HD, Sierra 2500 HD, and similar heavy-duty applications.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e8x165.1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e125.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSilver Machined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e3700 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e45.89 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"KMC","offers":[{"title":"Default Title","offer_id":68713125904665,"sku":"KM552SD20908000","price":545.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/km552_silvermachined_white__50161.jpg?v=1794773066"},{"product_id":"17x8-5-black-wheel-km718-summit-5x5-0-km71878550700","title":"KM718 Summit Black | 17x8.5 | 5x5 0mm Offset | KM71878550700","description":"\u003cp\u003eJeep and Truck Fitment on the 5x127 Pattern\u003c\/p\u003e\u003cp\u003eJeep Wrangler owners (2007-2026) and Jeep Grand Cherokee owners (1999-2026) are the natural home for the KMC KM718 Summit, and the 5x127 (5x5) bolt pattern confirms it. The 71.5mm hub bore fits these Jeep platforms along with classic GM half-ton applications including the Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), with 10 additional verified fits across the 5x127 universe. At 17x8.5 with a 0mm offset, the mounting surface sits exactly at the wheel's centerline, placing the barrel evenly between the inner and outer edges for a balanced, tucked stance that works across stock and leveled setups alike. The 2,500-lb load rating supports real-world truck and Jeep payloads, and backspacing measures 4.75 inches.\u003c\/p\u003e\u003cp\u003eSplit Six-Spoke Design with Concave Face\u003c\/p\u003e\u003cp\u003eThe KM718 Summit runs a split six-spoke layout with a concave face that gives the wheel visual depth without overcomplicating the design. Each pair of spokes branches outward from the hub, opening up the face and creating a layered profile that suits the character of Wrangler and truck builds. Rivets accent the face, adding a hardware-forward detail that fits the Summit's utilitarian aesthetic. The lug hardware is exposed and visible around the hub bore, sitting in a circle at the center of the face where the wheel mounts to the vehicle. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Cast Alloy Construction\u003c\/p\u003e\u003cp\u003eKMC builds the Summit as a one-piece cast alloy wheel, a construction that supports the deep spoke geometry and concave face profile in a single continuous shape. Cast alloy handles the complex undercuts and contoured surfaces the Summit's design calls for, and the proven construction delivers reliable long-haul value for daily-driven Jeeps and trucks. At 27.15 lbs, the Summit comes in right at the typical weight for a 17-inch alloy truck wheel in this class.\u003c\/p\u003e\u003cp\u003eSatin Black Finish Built for the Build\u003c\/p\u003e\u003cp\u003eThe Satin Black finish sits between matte and gloss, giving the Summit a low-sheen, intentional look that holds up through trail dust, road film, and seasonal exposure. It suits the Summit's rugged character without demanding the upkeep of a polished or chrome surface. The finish works across the full range of Wrangler and truck builds, from daily-driven setups to more aggressive configurations.\u003c\/p\u003e\u003cp\u003eAdditional Configurations Available\u003c\/p\u003e\u003cp\u003eThe KM718 Summit is offered across a range of sizes, offsets, and finishes beyond this 17x8.5 Satin Black setup, covering both 6-lug and additional bolt-pattern options for different platform needs. If this specific combination does not match your build, additional configurations are available across the Summit lineup.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e8.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.75\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e71.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2500 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e31.15 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"KMC","offers":[{"title":"Default Title","offer_id":68713126035737,"sku":"KM71878550700","price":374.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/km718_black_white__33235.jpg?v=1794773066"},{"product_id":"17x8-5-matte-black-wheel-km555-attack-6x135-10-km555mx17856310n","title":"KM555 Attack Matte Black | 17x8.5 | 6x135 -10mm Offset | KM555MX17856310N","description":"\u003cp\u003eBuilt for Ford's 6x135 Platform\u003c\/p\u003e\u003cp\u003eThe Ford F-150 is the anchor platform for the KMC KM555 Attack, and this 17x8.5 wheel is sized and drilled to match it. The 6x135 bolt pattern covers the F-150 (2004-2026), Ford Expedition (2003-2027), Lincoln Navigator (2003-2027), Ford F-150 Lightning (2022-2026), and Ford Bronco (2022-2026), with one additional verified platform rounding out the fitment universe. The 87.1mm hub bore fits these Ford and Lincoln applications, and the 2,650-lb load rating supports the payload demands of full-size truck and SUV use.\u003c\/p\u003e\u003cp\u003eSplit Multi-Spoke Design with Exposed Hardware\u003c\/p\u003e\u003cp\u003eThe KM555 Attack carries a split multi-spoke design that gives the wheel a layered, aggressive look without overcomplicating the design. Lug hardware sits exposed around the hub bore at the center of the face, adding a purposeful, hardware-forward detail that suits the truck-oriented character of the wheel. The outer lip adds visual depth to the profile, and the matte black finish ties the whole face together in a flat, low-glare look that holds up well through daily use, road film, and seasonal grime without demanding constant upkeep. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Cast Alloy Construction\u003c\/p\u003e\u003cp\u003eKMC builds the Attack as a one-piece cast alloy wheel, a construction that supports the complex split multi-spoke geometry across the face while keeping the design structurally consistent from hub to barrel. Cast alloy is the proven foundation for high-volume truck wheel production: it handles the spoke depth and face detail the Attack's design calls for, and it delivers reliable long-haul value at a price point that makes sense for a working truck build. At 30.2 lbs, the wheel carries the weight you'd expect from a cast alloy piece in this size.\u003c\/p\u003e\u003cp\u003eOffset and Fitment Details\u003c\/p\u003e\u003cp\u003eAt -10mm offset, the mounting surface sits rearward of the wheel's centerline, pushing the face outward relative to stock positioning. On a 17x8.5 wheel, that outboard shift gives the truck a wider, more planted stance than a neutral or positive offset would produce. Backspacing measures 4.36 inches. This wheel is also offered in additional sizes, widths, finishes, and bolt patterns across the KM555 Attack lineup, so other configurations are available if this size doesn't match your build.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e8.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x135\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.36\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eMatte Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2650 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e34.2 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"KMC","offers":[{"title":"Default Title","offer_id":68713126330649,"sku":"KM555MX17856310N","price":370.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/km555_matteblack_white__77470.jpg?v=1794773067"},{"product_id":"17x8-satin-black-wheel-km719-canyon-5x5-35-km71978050735","title":"KM719 Canyon Satin Black | 17x8 | 5x5 +35mm Offset | KM71978050735","description":"\u003cp\u003eJeep and Classic GM Platforms, One Bolt Pattern\u003c\/p\u003e\u003cp\u003eThe Jeep Wrangler (2007-2026) is the natural home for the KMC KM719 Canyon, and the 5x127 (5x5) bolt pattern confirms it. Grand Cherokee owners from 1999 through 2026 are equally covered, and the pattern also reaches back to classic GM platforms: Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), with 10 additional verified fits across the full 32-platform universe. The 71.5mm hub bore fits these applications, and the 2,500-lb load rating supports real-world truck and SUV demands.\u003c\/p\u003e\u003cp\u003eFull-Face Design With Exposed Hardware\u003c\/p\u003e\u003cp\u003eThe Canyon carries a full-face design, meaning the disc runs unbroken across the face rather than opening into traditional spokes. The satin black finish covers the entire face in a flat, low-sheen tone that holds its look through trail dust and road grime without demanding constant upkeep. Lug hardware sits exposed on the face around the hub area, adding a purposeful, hardware-forward detail that suits the Canyon's utilitarian character. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Cast Alloy Construction\u003c\/p\u003e\u003cp\u003eKMC builds the Canyon as a one-piece cast alloy wheel, a construction that supports the full-face profile's continuous geometry without seams or assembly points. Cast alloy handles complex face shapes well, and the one-piece form keeps the structure consistent from hub to barrel. At 26 lbs, the Canyon comes in slightly under the typical weight for a 17-inch alloy truck wheel in this class, a practical advantage for daily-driven Jeep and truck builds. Backspacing measures 5.88 inches.\u003c\/p\u003e\u003cp\u003eOffset and Stance for These Platforms\u003c\/p\u003e\u003cp\u003eAt +35mm offset, the Canyon's mounting surface sits forward of the wheel's centerline, positioning the wheel closer to the vehicle's face side. On Wrangler and Grand Cherokee platforms, this keeps the wheel tucked within the fender arch for a clean, controlled stance that works well on stock-height and lifted setups alike. The 17x8 size pairs naturally with a range of all-terrain and mud-terrain tire sizes common to these platforms. The Canyon is also offered in additional sizes and finishes across the KM719 lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e35 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5.88\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e71.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSatin Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2500 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e29.01 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"KMC","offers":[{"title":"Default Title","offer_id":68713126494489,"sku":"KM71978050735","price":374.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/km719_satinblack_white__59480.jpg?v=1794773067"},{"product_id":"17x8-5-matte-black-wheel-km555-attack-6x135-0-km555mx17856300","title":"KM555 Attack Matte Black | 17x8.5 | 6x135 0mm Offset | KM555MX17856300","description":"\u003cp\u003eBuilt for the 6x135 Ford Platform\u003c\/p\u003e\u003cp\u003eThe Ford 6x135 bolt pattern covers some of the most popular full-size platforms on the road, and the KMC KM555 Attack is sized and drilled to fit them directly. Verified fitment includes the Ford F-150 (2004-2026), Ford Expedition (2003-2027), Lincoln Navigator (2003-2027), Ford F-150 Lightning (2022-2026), and Ford Bronco (2022-2026), plus one additional verified platform. The 87.1mm hub bore fits these Ford applications, and the 2,650-lb load rating supports the payload and towing demands common to full-size truck and SUV use.\u003c\/p\u003e\u003cp\u003eSplit Multi-Spoke Design with Exposed Lugs\u003c\/p\u003e\u003cp\u003eThe KM555 Attack runs a split multi-spoke design that gives the wheel a layered, aggressive look without overcomplicating the design. The spokes divide and spread as they move outward from the hub, creating visual depth and an open design that suits the character of lifted Ford builds. Lug hardware sits exposed around the hub bore, visible on the face and adding a purposeful, hardware-forward detail to the overall look. A center cap is included with this wheel. The outer lip adds further dimension to the profile, and the matte black finish ties the whole face together with a flat, non-reflective surface that holds up well against brake dust and road grime without demanding constant upkeep.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eKMC builds the Attack as a one-piece alloy wheel, a construction that suits the wide distribution and consistent-quality reputation the brand has built across truck and off-road segments. The single-piece form keeps the spoke geometry and hub area in a continuous, unified shape through every load cycle, and the cast mold supports the split multi-spoke profile and outer lip without compromise. At 29.76 lbs, the wheel carries the structural integrity needed for full-size truck applications.\u003c\/p\u003e\u003cp\u003eFitment Details at 17x8.5 with 0mm Offset\u003c\/p\u003e\u003cp\u003eAt 0mm offset, the mounting surface sits exactly at the wheel's centerline, placing the barrel evenly split between inboard and outboard. On a 17x8.5 wheel, that means a balanced, centered stance rather than an aggressive outboard push. The 4.75 inches of backspacing reflects that centered position. This size and offset combination works across stock, leveled, and lifted F-150 and Expedition builds, and the 17-inch diameter leaves room for taller sidewall tire choices that suit lifted setups well. The KM555 Attack is also offered in additional sizes, widths, and finishes across the lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e8.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x135\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.75\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eMatte Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2650 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e33.76 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"KMC","offers":[{"title":"Default Title","offer_id":68713126822169,"sku":"KM555MX17856300","price":370.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/km555_matteblack_white__29420.jpg?v=1794773068"},{"product_id":"17x8-5-black-gray-wheel-km719-canyon-5x5-0-km71978550400","title":"KM719 Canyon Black Gray | 17x8.5 | 5x5 0mm Offset | KM71978550400","description":"\u003cp\u003eJeep and Truck Fitment on the 5x127 Pattern\u003c\/p\u003e\u003cp\u003eJeep Wrangler owners (2007-2026) and Jeep Grand Cherokee drivers (1999-2026) are the natural home for the KMC Canyon KM719, and the 5x127 (5x5) bolt pattern confirms it. The 71.5mm hub bore fits these platforms, and the 2,500-lb load rating supports the demands of daily-driven Jeeps and truck builds alike. Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999) round out the primary fitment list, with 10 additional verified platforms bringing the total to 32 applications across the 5x127 universe.\u003c\/p\u003e\u003cp\u003eFull-Face Design with Exposed Hardware\u003c\/p\u003e\u003cp\u003eThe Canyon carries a full-face design with a concave profile, giving the wheel visual depth without relying on traditional open spokes. The face features a multi-element layout with a gray tint overlay that creates contrast against the satin black surround. Lug hardware sits exposed and visible around the hub area, adding a purposeful, hardware-forward look that suits builds where the mechanical character of the wheel is part of the statement. A center cap is included with this wheel, though the exposed lug hardware remains the defining visual detail on the face.\u003c\/p\u003e\u003cp\u003eOne-Piece Cast Alloy Construction\u003c\/p\u003e\u003cp\u003eKMC builds the Canyon as a one-piece cast alloy wheel, a construction that supports the full-face concave geometry without compromise. Cast molds handle complex face profiles and contoured shapes in a single continuous pour, keeping the Canyon's layered face geometry intact from hub to outer lip. At 26.45 lbs, the wheel carries the structural integrity the 2,500-lb load rating demands across a wide range of truck and Jeep applications. The outer lip adds further definition to the profile when viewed from the side.\u003c\/p\u003e\u003cp\u003eOffset and Stance Details\u003c\/p\u003e\u003cp\u003eAt 0mm offset on an 8.5-inch-wide wheel, the mounting surface sits exactly at the wheel's centerline, placing the face and barrel in a balanced, symmetrical position relative to the hub. Backspacing measures 4.75 inches. This neutral offset works across stock, leveled, and lifted setups on Wrangler and Grand Cherokee platforms, keeping the wheel positioned without pushing aggressively outboard or tucking inward. The KMC Canyon is also offered in additional sizes and finishes across the broader KM719 lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e8.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.75\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e71.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack Gray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2500 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e30.46 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"KMC","offers":[{"title":"Default Title","offer_id":68713126887705,"sku":"KM71978550400","price":374.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/km719_blackgray_white__85969.jpg?v=1794773068"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/collections\/s-l400_20_281_29_1791306311__23388.jpg?v=1794865772","url":"https:\/\/offroadsource.com\/collections\/kmc.oembed?page=3","provider":"Offroad Source","version":"1.0","type":"link"}