{"title":"MKW Offroad","description":null,"products":[{"product_id":"20x9-black-wheel-m119-6x5-5-30-m119-2090613930bb","title":"M119 Black | 20x9 | 6x5.5 +30mm Offset | M119-2090613930BB","description":"\u003cp\u003eSix Spokes, Gloss Black Finish\u003c\/p\u003e\u003cp\u003eThe MKW M119 brings a clean six-spoke profile to the 20x9 format in a gloss black finish. The face is straightforward and purposeful: six spokes radiate from the hub area to the outer barrel, with the gloss black coating giving the wheel a polished, reflective look without chrome hardware or machined contrast. A center cap is included and covers the lug hardware, keeping the hub area clean and uninterrupted. The 6.18 inches of backspacing and the one-piece alloy construction keep the build tidy from the inside out.\u003c\/p\u003e\u003cp\u003eCast Alloy Construction\u003c\/p\u003e\u003cp\u003eThe M119 is a one-piece cast alloy wheel. The entire structure, from the hub flange to the barrel walls, is formed as a single unit rather than assembled from separate sections. That means no weld seams or joint lines to manage, and a consistent structural profile across the face and barrel. At 33.4 lbs, this wheel sits below the typical weight for a 20-inch alloy truck wheel in this class, which runs closer to 39 lbs.\u003c\/p\u003e\u003cp\u003eOffset and Fitment Geometry\u003c\/p\u003e\u003cp\u003eThe +30mm offset places the mounting surface forward of the wheel's centerline, positioning the wheel closer to the inner fender rather than pushing outboard. On a 9-inch-wide wheel, this keeps the stance measured and proportional, suited to builds that want a clean, tucked look rather than an outboard push. The 100.30mm hub bore fits 6x139.7 (6x5.5) platforms, and the 2,200-lb load rating covers standard half-ton truck applications.\u003c\/p\u003e\u003cp\u003eVerified Truck Fitment\u003c\/p\u003e\u003cp\u003eThis wheel fits the Chevrolet Silverado 1500 (1999???2026), GMC Sierra 1500 (2000???2026), Toyota Tacoma (1995???2026), Toyota Tundra (2000???2026), and Chevrolet K1500 (1988???1999), with 10 additional verified platforms across the 6x139.7 (6x5.5) fitment universe, totaling 114 verified fits. The 6x139.7 (6x5.5) bolt pattern is one of the most common six-lug patterns across full-size and mid-size truck platforms, covering GM half-tons, Toyota trucks and SUVs, Nissan Titan and Frontier, and Dodge Dakota among others. The M119 is also offered in additional sizes and finishes across the lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e30 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e6.18\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e100.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2200 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e33.4 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"MKW Offroad","offers":[{"title":"Default Title","offer_id":68713144910105,"sku":"M119-2090613930BB","price":348.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/m119_black_white__45710.jpg?v=1794773119"},{"product_id":"22x9-black-wheel-m119-6x5-5-30-m119-2290613930bb","title":"M119 Black | 22x9 | 6x5.5 +30mm Offset | M119-2290613930BB","description":"\u003cp\u003eSix-Spoke Gloss Black on a 22-Inch Barrel\u003c\/p\u003e\u003cp\u003eThe MKW M119 brings a clean six-spoke design to the 22-inch truck wheel segment in a gloss black finish. The face is straightforward and purposeful: six spokes radiate from the hub area to the outer barrel, with the lug hardware tucked behind the included center cap for an uninterrupted look at the face. A center cap (F119B) is included with this wheel. At 37.9 lbs, this 22-inch alloy comes in notably close to the light end of the class, where typical 22-inch truck alloys run around 45 lbs.\u003c\/p\u003e\u003cp\u003eOffset and Dimensions\u003c\/p\u003e\u003cp\u003eThis wheel runs a 22x9 footprint with a +30mm offset, which places the mounting surface forward of the wheel's centerline. That positioning keeps the face sitting closer to the fender plane rather than pushing outboard, making it a natural fit for trucks that want a larger-diameter wheel without altering the stock track width. Backspacing measures 6.18 inches. The 100.30mm hub bore fits 6x139.7 (6x5.5) platforms across GM and Toyota full-size and mid-size truck applications.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eThe M119 is a one-piece cast alloy wheel. The single-piece structure means no seams, no welded joints, and no assembly hardware between sections. The gloss black finish covers the face and barrel uniformly, giving the wheel a consistent appearance from any angle. The outer lip adds a subtle depth to the profile without drawing attention away from the spoke layout.\u003c\/p\u003e\u003cp\u003eFitment Across 6x139.7 Platforms\u003c\/p\u003e\u003cp\u003eThe 6x139.7 (6x5.5) bolt pattern is one of the most widely used 6-lug truck patterns on the market, covering Chevrolet Silverado 1500 (1999-2026), GMC Sierra 1500 (2000-2026), Toyota Tacoma (1995-2026), Toyota Tundra (2000-2026), and Chevrolet K1500 (1988-1999), among 10 additional verified platforms totaling 114 verified fitments. Whether your truck is running stock ride height, a leveling kit, or a lift kit, the +30mm offset keeps the wheel positioned within the fender without requiring trimming or additional hardware on most of these applications.\u003c\/p\u003e\u003cp\u003eThe M119 is also offered in additional sizes and finishes across the MKW lineup, covering both 6-lug and 8-lug bolt patterns for a range of truck builds.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e30 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e6.18\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e100.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2200 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e37.9 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"MKW Offroad","offers":[{"title":"Default Title","offer_id":68713145368857,"sku":"M119-2290613930BB","price":402.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/m119_black_white__62925.jpg?v=1794773120"},{"product_id":"22x9-chrome-wheel-m122-6x5-5-18-m122-2290655018c","title":"M122 Chrome | 22x9 | 6x5.5 +18mm Offset | M122-2290655018C","description":"\u003cp\u003eChrome Finish on a 22-Inch Truck Wheel\u003c\/p\u003e\u003cp\u003eThe MKW M122 arrives in a full chrome finish that covers the entire face, spokes, and barrel. Chrome is a plated metal finish, and on a 22-inch wheel it delivers a mirror-bright surface that holds its reflective quality across the full disc. The center cap is included with this wheel, and with hidden lugs sitting behind it, the face presents a clean, uninterrupted look from hub to spoke tip.\u003c\/p\u003e\u003cp\u003eSplit Ten-Spoke Design\u003c\/p\u003e\u003cp\u003eThe M122 runs a split ten-spoke layout across a one-piece alloy construction. Each pair of spokes branches from a shared root near the hub and fans outward toward the outer edge, giving the face a layered, high-spoke-count appearance without crowding the disc. The chrome finish amplifies the depth between the split pairs, making the face geometry more pronounced. At 38.6 lbs, this 22-inch alloy sits close to the lighter end of what this diameter and width typically weigh in the truck wheel segment.\u003c\/p\u003e\u003cp\u003eOffset and Hub Bore for 6-Lug Trucks\u003c\/p\u003e\u003cp\u003eThe +18mm offset places the mounting surface forward of the wheel's centerline, positioning the face closer to the fender plane. On a 9-inch-wide wheel, this keeps the wheel sitting within the fender line rather than pushing outboard. Backspacing measures 5.71 inches. The 106.1mm hub bore fits 6x139.7 (6x5.5) platforms, covering the Silverado 1500, Sierra 1500, Tacoma, Tundra, and similar six-lug truck applications. The 2,200-lb load rating is rated for half-ton truck use.\u003c\/p\u003e\u003cp\u003eVerified Fitment Across 6x139.7 Platforms\u003c\/p\u003e\u003cp\u003eThe M122 in this size fits the Chevrolet Silverado 1500 (1999-2026), GMC Sierra 1500 (2000-2026), Toyota Tacoma (1995-2026), Toyota Tundra (2000-2026), and Chevrolet K1500 (1988-1999), with 10 additional verified platforms in the 6x139.7 universe bringing the total to 114 confirmed fitments. The M122 is also offered in additional sizes and bolt-pattern options across the MKW lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e18 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5.71\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eChrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2200 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e38.6 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"MKW Offroad","offers":[{"title":"Default Title","offer_id":68713146056985,"sku":"M122-2290655018C","price":497.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/m122_chrome_white__53269.jpg?v=1794773122"},{"product_id":"22x9-5-gloss-black-wheel-m141-6x135-30-m141-2295613530ga","title":"M141 Gloss Black | 22x9.5 | 6x135 +30mm Offset | M141-2295613530GA","description":"\u003cp\u003eFord F-150 and Expedition Fitment\u003c\/p\u003e\u003cp\u003eThe 6x135 bolt pattern is Ford's full-size signature, shared across the F-150 (2004-present), Expedition, Navigator, and Raptor. The MKW M141 lands in this space as a 22x9.5 alloy wheel with a +30mm offset, placing the mounting surface forward of centerline for a tucked, body-hugging stance that suits leveled and stock-height Ford builds. The 87mm hub bore fits these Ford platforms, and the 2,100-lb load rating supports the demands of full-size truck use.\u003c\/p\u003e\u003cp\u003eEight-Spoke Concave Design\u003c\/p\u003e\u003cp\u003eThe M141 runs eight spokes arranged in a concave face profile, giving the wheel visual depth that flat-face designs simply do not produce. The spokes draw the eye inward toward the hub, where the exposed lug hardware sits in a circle around the center bore, visible on the face and adding a purposeful, hardware-forward look to the overall design. The gloss black finish keeps the look sharp and consistent across the face, with no machined or milled contrast breaking up the surface. A center cap (MKC-F141) is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Cast Alloy Construction\u003c\/p\u003e\u003cp\u003eThe M141 is built as a one-piece cast alloy wheel, a construction that supports the concave spoke geometry and eight-spoke layout in a single continuous form. Cast alloy handles complex face profiles well, maintaining the concave depth and spoke shaping through the full structure without seams or assembly points. At 42 lbs, the wheel carries the weight expected for a 22-inch cast alloy in this size class. The gloss black finish is applied to the full face for a clean, uniform appearance that holds up to daily driving conditions.\u003c\/p\u003e\u003cp\u003eFitment Details\u003c\/p\u003e\u003cp\u003eFord F-150 owners running stock or leveled setups get a wheel sized to work within the factory fender envelope at this offset. The +30mm offset positions the mounting surface toward the front of the wheel, keeping the wheel face closer to the fender line rather than pushing outward. The 6.43 inches of backspacing reflects that inboard positioning. This wheel is also offered in additional sizes and configurations across the M141 lineup, covering a range of bolt patterns and finishes for other platform fits.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x135\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e30 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e6.43\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eGloss Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2100 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e42 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"MKW Offroad","offers":[{"title":"Default Title","offer_id":68713146384665,"sku":"M141-2295613530GA","price":402.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/m141_glossblack_white__79320.jpg?v=1794773123"},{"product_id":"22x9-5-gloss-black-wheel-m141-6x5-5-20-m141-2295655020ga","title":"M141 Gloss Black | 22x9.5 | 6x5.5 +20mm Offset | M141-2295655020GA","description":"\u003cp\u003eA Wheel Built for the 6x139.7 Truck Platform\u003c\/p\u003e\u003cp\u003eThe MKW M141 is a 22x9.5 gloss black alloy wheel drilled for the 6x139.7 (6x5.5) bolt pattern, one of the most widely used 6-lug patterns in full-size truck and SUV applications. Think Chevrolet Silverado 1500, GMC Sierra 1500, Tahoe, Suburban, Nissan Titan, Toyota Tacoma, and similar platforms. The 106.10mm hub bore fits these applications, and the 2,100-lb load rating supports everyday truck use. At 22 inches in diameter, this wheel brings a commanding presence to any build running this bolt pattern.\u003c\/p\u003e\u003cp\u003eEight-Spoke Concave Face in Gloss Black\u003c\/p\u003e\u003cp\u003eThe M141 features eight spokes arranged in a concave face profile, giving the wheel visual depth that flat-face designs simply don't offer. The concave geometry draws the eye inward toward the hub, creating a layered look that suits the scale of a 22-inch wheel on a full-size truck. The gloss black finish is clean and consistent across the face, delivering a sharp, high-contrast look that holds up against brake dust and road grime. Exposed lug hardware sits in a circle around the hub bore, adding a purposeful, hardware-forward detail to the face. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eThe M141 is cast in one piece from aluminum alloy, a construction method that supports the complex concave spoke geometry and deep face profile in a single continuous form. One-piece casting keeps the structural integrity intact from hub to barrel, and at 42 lbs, the wheel carries the weight appropriate for a 22-inch truck application. MKW's mid-range alloy lineup is built around this construction for its proven long-haul reliability and consistent finish quality across the face.\u003c\/p\u003e\u003cp\u003eFitment Details for Your Build\u003c\/p\u003e\u003cp\u003eThe +20mm offset places the mounting surface forward of the wheel's centerline, positioning the wheel closer to the vehicle's suspension components. On a 9.5-inch-wide wheel, this offset keeps the wheel sitting within the fender arch rather than pushing outward, making it a practical choice for trucks running stock or leveled setups. Backspacing measures 6.04 inches. The M141 is also offered in additional sizes and configurations across the MKW lineup to cover a range of truck builds.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e6.04\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eGloss Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2100 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e42 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"MKW Offroad","offers":[{"title":"Default Title","offer_id":68713154281753,"sku":"M141-2295655020GA","price":402.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/m141_glossblack_white__46586.jpg?v=1794773124"},{"product_id":"22x9-5-silver-machined-wheel-m141-6x135-30-m141-2295613530m","title":"M141 Silver Machined | 22x9.5 | 6x135 +30mm Offset | M141-2295613530M","description":"\u003cp\u003eFord's 6x135 Platform, Covered\u003c\/p\u003e\u003cp\u003eThe MKW M141 is a 22x9.5 cast alloy wheel drilled for the 6x135 bolt pattern, putting it squarely in Ford F-150, Expedition, and Navigator territory (2004-present), including the Raptor. At +30mm offset, the mounting surface sits forward of the wheel's centerline, keeping the wheel positioned closer to the face side and tucking it neatly within the fender arch. The 87mm hub bore fits these Ford platforms, and the 2,100-lb load rating supports full-size truck and SUV payloads. Backspacing comes in at 6.43 inches. At 42 lbs, this is a solid, road-ready wheel for daily-driven F-150 and Expedition builds.\u003c\/p\u003e\u003cp\u003eEight-Spoke Design with Concave Depth\u003c\/p\u003e\u003cp\u003eThe M141 runs eight spokes arranged in a concave profile, giving the face a recessed, three-dimensional look that adds visual depth without overcomplicating the design. The spokes taper outward from the hub, and the concave geometry pulls the face back from the outer edge, creating a layered appearance that suits the scale of a full-size truck or SUV. Lug hardware sits exposed around the hub bore, visible on the face as part of the wheel's finished look. A center cap is included.\u003c\/p\u003e\u003cp\u003eSilver Finish with Machined Spoke Accents\u003c\/p\u003e\u003cp\u003eThe finish pairs a silver background across the wheel with machined spoke accents that bring a brighter, reflective contrast to the face. The machined surfaces cut through the silver to reveal the aluminum beneath, giving the M141 a two-tone appearance that holds up well across different truck colors and trim levels. This finish suits builds that want a clean, polished look without going full chrome.\u003c\/p\u003e\u003cp\u003eOne-Piece Cast Construction\u003c\/p\u003e\u003cp\u003eMKW builds the M141 as a one-piece cast alloy wheel, a construction that supports the concave spoke geometry and the eight-spoke profile in a single continuous shape. Cast alloy handles the complex contours of the M141's face well, maintaining the spoke taper and concave depth through the full form. It's a proven, long-haul construction choice that delivers reliable structural integrity across everyday truck and SUV use. The M141 is also offered in additional sizes and finishes across the MKW lineup for builds with different fitment needs.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x135\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e30 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e6.43\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSilver Machined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2100 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e42 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"MKW Offroad","offers":[{"title":"Default Title","offer_id":68713154642201,"sku":"M141-2295613530M","price":402.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/m141_silvermachined_white__70454.jpg?v=1794773125"},{"product_id":"22x9-5-silver-machined-wheel-m141-6x5-5-20-m141-2295655020m","title":"M141 Silver Machined | 22x9.5 | 6x5.5 +20mm Offset | M141-2295655020M","description":"\u003cp\u003eEight-Spoke Concave Design with Machined Accents\u003c\/p\u003e\u003cp\u003eThe MKW M141 brings a clean, truck-scaled look to the 6x139.7 bolt pattern in a 22x9.5 size. Eight spokes flow from the hub outward in a concave profile, giving the face visual depth without overcomplicating the design. The silver finish across the spoke surfaces contrasts with machined spoke accents that bring a brighter, reflective detail to the face. Exposed lug hardware sits in a circle around the hub bore, adding a purposeful, hardware-forward look to the center of the wheel. A center cap is included.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eThe M141 is cast as a single piece in alloy aluminum, a construction method that supports the concave spoke geometry and machined surface detail in one continuous form. Cast alloy delivers proven structural integrity and long-haul reliability at a price point that has made it the most widely used construction in the aftermarket wheel segment. At 42 lbs, the M141 carries a weight consistent with its 22-inch size and one-piece build. The 2,100-lb load rating supports full-size truck payloads across everyday driving demands.\u003c\/p\u003e\u003cp\u003eOffset and Hub Bore Details\u003c\/p\u003e\u003cp\u003eThe +20mm offset places the mounting surface forward of the wheel's centerline, positioning the wheel face closer to the vehicle's fender plane for a tucked, integrated stance. The 6.04 inches of backspacing reflects that forward mounting position. The 106.10mm hub bore fits the 6x139.7 platforms this wheel is drilled for, covering the GM full-size truck and SUV family (Silverado 1500, Sierra 1500, Tahoe, Suburban, Yukon, Escalade), Toyota platforms including the Tacoma, 4Runner, and Sequoia, and Nissan Titan and Armada, among other 6x139.7 applications.\u003c\/p\u003e\u003cp\u003eFitment Across the 6x139.7 Platform\u003c\/p\u003e\u003cp\u003eThe 6x139.7 (6x5.5) bolt pattern is one of the most widely shared six-lug patterns in the full-size truck segment, and the M141 in this 22x9.5 size is sized for that audience. The +20mm offset suits builds where a more inboard wheel position is the goal, keeping the wheel tucked within the fender arch rather than pushing outward. MKW also offers the M141 in additional sizes and finish options across the lineup, so there are configurations available for builds with different size or finish requirements.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e6.04\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSilver Machined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2100 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e42 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"MKW Offroad","offers":[{"title":"Default Title","offer_id":68713155035417,"sku":"M141-2295655020M","price":402.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/m141_silvermachined_white__91359.jpg?v=1794773126"},{"product_id":"22x9-5-black-asphalt-wheel-m142-6x135-30-m142-2295613530ga","title":"M142 Black Asphalt | 22x9.5 | 6x135 +30mm Offset | M142-2295613530GA","description":"\u003cp\u003eBuilt for Ford's 6x135 Platform\u003c\/p\u003e\u003cp\u003eThe Ford F-150 is the anchor platform for the MKW M142, and this 22x9.5 wheel is sized to suit it. The 6x135 bolt pattern covers the F-150 (2004-2026), Ford Expedition (2003-2027), Lincoln Navigator (2003-2027), Ford F-150 Lightning (2022-2026), and Ford Bronco (2022-2026), with one additional verified platform in the lineup. The 87mm hub bore fits these Ford and Lincoln applications, and the 2,100-lb load rating supports full-size truck and SUV use.\u003c\/p\u003e\u003cp\u003eSplit Seven-Spoke Design with Exposed Hardware\u003c\/p\u003e\u003cp\u003eThe M142 runs a split seven-spoke layout with a concave face profile that gives the wheel visual depth from every angle. Each of the seven split spokes fans outward from the hub, creating an open, layered look that suits the scale of a 22-inch diameter. The lug hardware sits exposed and visible around the hub bore at the center of the face, adding a purposeful, hardware-forward detail to the overall design. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eGloss Black Asphalt Finish\u003c\/p\u003e\u003cp\u003eThe Gloss Black Asphalt finish gives the M142 a deep, dark tone with a polished sheen that holds its character across seasons and road conditions. It pairs naturally with blacked-out trim packages, body-color accents, and dark exterior details common on F-150 and Expedition builds. The finish is consistent across the face, spokes, and barrel for a unified look at any angle.\u003c\/p\u003e\u003cp\u003eOne-Piece Cast Alloy Construction\u003c\/p\u003e\u003cp\u003eMKW builds the M142 as a one-piece cast alloy wheel, a construction that supports the complex split-spoke geometry and concave face profile in a single continuous form. Cast alloy carries the structural depth of the M142's design through every load cycle, and the one-piece build keeps the wheel's proportions clean without seams or hardware at the barrel junction. At 42 lbs, the M142 is a solid, durable choice for daily-driven trucks and SUVs. Backspacing measures 6.43 inches.\u003c\/p\u003e\u003cp\u003eFitment Details\u003c\/p\u003e\u003cp\u003eAt +30mm offset, the M142's mounting surface sits forward of the wheel's centerline, positioning the wheel closer to the vehicle's face side. On F-150 and Expedition platforms, this offset keeps the wheel tucked within the fender arch for a clean, factory-proportioned stance that works on stock-height and leveled setups alike. The M142 is also offered in additional sizes and finishes across the lineup for builds with different fitment targets.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x135\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e30 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e6.43\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack Asphalt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2100 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e42 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"MKW Offroad","offers":[{"title":"Default Title","offer_id":68713155395865,"sku":"M142-2295613530GA","price":402.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/m142_blackasphalt_white__68033.jpg?v=1794773127"},{"product_id":"22x9-5-silver-machined-wheel-m142-6x135-30-m142-2295613530m","title":"M142 Silver Machined | 22x9.5 | 6x135 +30mm Offset | M142-2295613530M","description":"\u003cp\u003eFord's 6x135 Platform, Covered\u003c\/p\u003e\u003cp\u003eThe Ford F-150 is the anchor platform for the MKW M142, and this 22x9.5 wheel is sized and drilled to match it directly. The 6x135 bolt pattern covers the F-150 from 2004 through 2026, the Ford Expedition (2003-2027), Lincoln Navigator (2003-2027), Ford F-150 Lightning (2022-2026), and the Ford Bronco (2022-2026), with one additional verified platform beyond those five. The 87mm hub bore fits these Ford and Lincoln applications, and the 2,100-lb load rating supports daily-driven full-size truck and SUV use.\u003c\/p\u003e\u003cp\u003eSplit Seven-Spoke Design with Machined Detail\u003c\/p\u003e\u003cp\u003eThe M142 runs a split seven-spoke layout with a concave face profile, giving the wheel visual depth that suits the scale of a full-size truck or SUV. Each spoke face is machined to a brighter silver contrast against the silver background, creating a two-tone effect that adds dimension without relying on chrome or heavy gloss. The exposed lug hardware sits in a circle around the hub bore at the center of the face, visible and intentional rather than hidden behind a cap. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eMKW builds the M142 as a one-piece alloy wheel, a construction that supports the complex concave spoke geometry and machined spoke faces in a single continuous form. One-piece cast alloy is the proven workhorse of the aftermarket wheel world: it handles the structural demands of full-size truck payloads reliably and holds the machined finish consistently across the face. At 42 lbs, the wheel is well within the expected range for a 22-inch one-piece alloy at this diameter.\u003c\/p\u003e\u003cp\u003eOffset and Fitment Details\u003c\/p\u003e\u003cp\u003eThe F-150 and its platform siblings are the natural home for this wheel. At +30mm offset, the mounting surface sits forward of the wheel's centerline, positioning the wheel closer to the vehicle's face side. On a 9.5-inch-wide wheel, that offset keeps the wheel tucked within the fender arch for a clean, composed stance on stock and leveled F-150 builds alike. Backspacing measures 6.43 inches. The M142 is also offered in additional sizes and finishes across the lineup, covering both 6-lug and 8-lug bolt patterns for buyers who need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x135\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e30 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e6.43\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSilver Machined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2100 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e42 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"MKW Offroad","offers":[{"title":"Default Title","offer_id":68713155821849,"sku":"M142-2295613530M","price":402.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/m142_silvermachined_white__82175.jpg?v=1794773128"},{"product_id":"24x10-black-asphalt-wheel-m142-6x135-30-m142-2410613530ga","title":"M142 Black Asphalt | 24x10 | 6x135 +30mm Offset | M142-2410613530GA","description":"\u003cp\u003eFord's 6x135 Platform, Covered\u003c\/p\u003e\u003cp\u003eThe Ford F-150 (2004-2026) is the anchor platform for the MKW M142, and this 24x10 wheel is sized to make a statement on it. The 6x135 bolt pattern also covers the Ford Expedition (2003-2027), Lincoln Navigator (2003-2027), Ford F-150 Lightning (2022-2026), and Ford Bronco (2022-2026), with one additional verified platform in the fitment universe. The 87mm hub bore fits these Ford and Lincoln applications. At a 2,100-lb load rating, the M142 handles the demands of full-size truck and SUV duty.\u003c\/p\u003e\u003cp\u003eSplit Seven-Spoke Design in Gloss Black Asphalt\u003c\/p\u003e\u003cp\u003eThe M142 runs a split seven-spoke layout with a concave face profile, giving the wheel visual depth that suits the scale of a 24-inch diameter. Each of the seven split spokes fans outward from the hub with a clean, symmetrical geometry that works well on full-size Ford builds. The Gloss Black Asphalt finish delivers a dark, polished look that holds up against road grime and brake dust without demanding constant attention. Lug hardware sits exposed on the face around the hub bore, adding a purposeful, hardware-forward detail to the overall look. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Cast Alloy Construction\u003c\/p\u003e\u003cp\u003eThe M142 is cast in one piece from alloy aluminum. At 24 inches, the one-piece cast process supports the complex split-spoke geometry and concave face profile in a single continuous structure, keeping the design's depth intact without the complexity of multi-piece assembly. The result is a wheel that delivers MKW's mid-range truck alloy value in a size that commands attention on larger Ford platforms. The wheel weighs 51 lbs.\u003c\/p\u003e\u003cp\u003eOffset and Fitment Details\u003c\/p\u003e\u003cp\u003eThe F-150 and its platform siblings are the natural home for this wheel. At +30mm offset, the mounting surface sits forward of the wheel's centerline, positioning the face closer to the fender opening for a look that suits stock and leveled Ford builds. Backspacing measures 6.68 inches. The 24-inch diameter puts this squarely in show-style territory, making it a strong choice for builds where visual presence is the priority. The M142 is also offered in additional sizes and finishes across the lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x135\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e30 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e6.68\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack Asphalt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2100 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e51 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"MKW Offroad","offers":[{"title":"Default Title","offer_id":68713163948313,"sku":"M142-2410613530GA","price":511.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/m142_blackasphalt_white__55497.jpg?v=1794773129"},{"product_id":"24x10-silver-machined-wheel-m142-6x135-30-m142-2410613530m","title":"M142 Silver Machined | 24x10 | 6x135 +30mm Offset | M142-2410613530M","description":"\u003cp\u003eFord's 6x135 Platform, One Wheel Family\u003c\/p\u003e\u003cp\u003eThe F-150, Expedition, Navigator, F-150 Lightning, and Bronco all share the 6x135 bolt pattern, and the MKW M142 is sized to serve every one of them. At 24 inches in diameter, this is a show-presence wheel that commands attention on full-size Ford trucks and SUVs. The 87mm hub bore fits these Ford platforms, and the 2,100-lb load rating is rated for the application. One additional verified platform rounds out the fitment universe beyond the five named here.\u003c\/p\u003e\u003cp\u003eSplit Seven-Spoke Design with Exposed Hardware\u003c\/p\u003e\u003cp\u003eThe M142 runs a split seven-spoke layout with a concave face profile, giving the wheel visual depth that a flat face simply cannot match. Each of the seven split spokes draws the eye inward toward the hub, where the lug hardware sits exposed and visible in a circle around the hub bore. That exposed hardware is part of the design, not an afterthought, and it adds an industrial edge to the overall look. A center cap is included with this wheel, covering the hub area when you want a cleaner presentation.\u003c\/p\u003e\u003cp\u003eSilver Finish with Machined Spoke Faces\u003c\/p\u003e\u003cp\u003eThe finish pairs a silver background across the wheel with machined spoke faces that bring a brighter, more reflective contrast to each spoke surface. The result is a two-tone effect that gives the M142 visual dimension without relying on chrome or heavy gloss. The machined surfaces highlight the split-spoke geometry, making the concave depth more pronounced from any angle.\u003c\/p\u003e\u003cp\u003eOne-Piece Cast Alloy Construction\u003c\/p\u003e\u003cp\u003eMKW builds the M142 as a one-piece cast alloy wheel, a construction that supports the complex concave spoke geometry and split-spoke undercuts in a single continuous form. Cast alloy handles the contoured face profile well, holding the design's depth and detail through the full production run. At 51 lbs, the wheel carries the structural integrity for full-size Ford truck and SUV duty. Backspacing measures 6.68 inches.\u003c\/p\u003e\u003cp\u003eFitment for Ford Full-Size Trucks and SUVs\u003c\/p\u003e\u003cp\u003eFord F-150 owners from 2004 through 2026 get a wheel sized for presence, and the same 6x135 pattern covers the Expedition (2003-2027) and Lincoln Navigator (2003-2027) for SUV builds that want the same aggressive diameter. The F-150 Lightning (2022-2026) and Bronco (2022-2026) also fit. At +30mm offset, the mounting surface sits forward of the wheel's centerline, positioning the wheel face closer to the fender opening. The M142 is also offered in additional sizes and finishes across the lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x135\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e30 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e6.68\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSilver Machined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2100 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e51 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"MKW Offroad","offers":[{"title":"Default Title","offer_id":68713164243225,"sku":"M142-2410613530M","price":511.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/m142_silvermachined_white__78649.jpg?v=1794773130"},{"product_id":"22x9-5-silver-machined-wheel-m142-6x5-5-20-m142-2295655020m","title":"M142 Silver Machined | 22x9.5 | 6x5.5 +20mm Offset | M142-2295655020M","description":"\u003cp\u003eBuilt for the 6x139.7 Platform\u003c\/p\u003e\u003cp\u003eThe MKW M142 lands squarely in the 6x139.7 (6x5.5) bolt pattern universe, covering Chevrolet Silverado 1500 (1999-2026), GMC Sierra 1500 (2000-2026), Toyota Tacoma (1995-2026), Toyota Tundra (2000-2026), and Chevrolet K1500 (1988-1999), with 10 additional verified platforms in the fitment library. The 106.10mm hub bore fits these GM and Toyota full-size and mid-size truck platforms. At a 2,100-lb load rating, this wheel is sized for the demands of daily-driven truck use.\u003c\/p\u003e\u003cp\u003eSplit Seven-Spoke Design with Concave Face\u003c\/p\u003e\u003cp\u003eThe M142 runs a split seven-spoke layout with a concave face, giving the wheel visual depth that suits the 22-inch diameter well. Each of the seven split spokes carries a machined face against the silver background, creating a two-tone contrast that adds definition without relying on heavy surface detail. The lug hardware sits exposed around the hub bore, visible on the wheel face as part of the design rather than hidden behind a cap. A center cap (MKC-F141) is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eMKW builds the M142 as a one-piece cast alloy wheel, a construction that supports the complex spoke geometry and concave face profile in a single continuous shape. Cast alloy carries the split-spoke depth and contoured face without the assembly complexity of multi-piece construction, making it a reliable long-haul choice for trucks that see regular use. At 42 lbs, the weight is consistent with what a 22-inch one-piece alloy wheel of this design carries.\u003c\/p\u003e\u003cp\u003eFitment Details for Your Build\u003c\/p\u003e\u003cp\u003eThe Silverado 1500 and Sierra 1500 are the natural home for this wheel, and the Tacoma and Tundra fitment extends the M142's reach across both GM and Toyota 6-lug platforms. At +20mm offset with 6.04 inches of backspacing, the mounting surface sits forward of the wheel's centerline, keeping the wheel positioned closer to the vehicle's face. This offset suits stock and leveled truck builds well, placing the wheel face in a clean, flush position within the fender. The M142 is also offered in additional sizes, widths, and finishes across the lineup for builds that need a different fit.\u003c\/p\u003e\u003cp\u003eFinish That Works Across Seasons\u003c\/p\u003e\u003cp\u003eThe Silver with Machined Spoke Faces finish pairs a silver background with bright machined spoke faces for a contrast that holds up across different truck colors and trim levels. Machined surfaces bring a polished brightness to the spokes while the silver areas of the face provide a neutral backdrop that complements chrome, body-color, and blacked-out trim alike.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e6.04\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSilver Machined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2100 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e42 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"MKW Offroad","offers":[{"title":"Default Title","offer_id":68713164701977,"sku":"M142-2295655020M","price":402.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/m142_silvermachined_white__17556.jpg?v=1794773131"},{"product_id":"22x9-5-black-asphalt-wheel-m142-6x5-5-20-m142-2295655020ga","title":"M142 Black Asphalt | 22x9.5 | 6x5.5 +20mm Offset | M142-2295655020GA","description":"\u003cp\u003eBuilt for the 6x139.7 Platform\u003c\/p\u003e\u003cp\u003eThe MKW M142 lands on one of the most widely shared 6-lug bolt patterns in the truck world. The 6x139.7 (6x5.5) pattern covers Chevrolet Silverado 1500 (1999-2026), GMC Sierra 1500 (2000-2026), Toyota Tacoma (1995-2026), Toyota Tundra (2000-2026), and Chevrolet K1500 (1988-1999), along with 10 additional verified platforms across 114 total fitments. The 106.10mm hub bore fits these platforms, and the 2,100-lb load rating supports full-size truck payloads.\u003c\/p\u003e\u003cp\u003eSplit Seven-Spoke Design with Exposed Hardware\u003c\/p\u003e\u003cp\u003eThe M142 runs a split seven-spoke layout with a concave face profile, giving the wheel visual depth that suits the scale of a 22-inch diameter. Seven split spokes radiate from the hub, each divided to open up the face and add dimension without overcomplicating the design. The lug hardware sits exposed around the hub bore, visible on the face and adding a purposeful, hardware-forward look to the overall presentation. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Cast Alloy Construction\u003c\/p\u003e\u003cp\u003eThe M142 is cast in one piece from alloy aluminum, a construction that supports the complex spoke geometry and concave face profile in a single continuous shape. Cast alloy has earned its place as the most-used construction in aftermarket wheel manufacturing for good reason: it delivers proven structural integrity and long-haul value at a price point that makes a 22-inch truck wheel accessible. At 42 lbs, the weight is consistent with what this size and construction deliver.\u003c\/p\u003e\u003cp\u003eFitment Details for Your Build\u003c\/p\u003e\u003cp\u003eAt 22x9.5 with a +20mm offset, the mounting surface sits forward of the wheel's centerline, positioning the wheel closer to the vehicle's face. On a 9.5-inch-wide wheel, this offset keeps the wheel seated within the fender arch rather than pushing outward, making it a natural fit for stock and leveled truck builds where a clean, tucked stance is the goal. Backspacing measures 6.04 inches. The Gloss Black Asphalt finish brings a deep, consistent gloss across the face that holds its look through daily driving conditions.\u003c\/p\u003e\u003cp\u003eThe M142 is also offered in additional sizes and configurations across the MKW lineup, with options spanning multiple finishes and bolt patterns for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e6.04\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack Asphalt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2100 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e42 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"MKW Offroad","offers":[{"title":"Default Title","offer_id":68713165095193,"sku":"M142-2295655020GA","price":402.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/m142_blackasphalt_white__36906.jpg?v=1794773133"},{"product_id":"24x10-black-asphalt-wheel-m142-6x5-5-20-m142-2410655020ga","title":"M142 Black Asphalt | 24x10 | 6x5.5 +20mm Offset | M142-2410655020GA","description":"\u003cp\u003eA 24-Inch Statement on 6x139.7 Platforms\u003c\/p\u003e\u003cp\u003eThe MKW M142 arrives in a 24x10 Gloss Black Asphalt finish built for the 6x139.7 (6x5.5) bolt pattern, one of the most widely shared 6-lug patterns in full-size truck and mid-size truck history. Chevrolet Silverado 1500 owners from 1999 through 2026 get a direct fit, as do GMC Sierra 1500 owners from 2000 through 2026, Toyota Tacoma from 1995 through 2026, Toyota Tundra from 2000 through 2026, and Chevrolet K1500 from 1988 through 1999. Beyond those five platforms, this wheel covers 10 additional verified applications across 114 total fitments, making it one of the broader-reaching 6-lug options in the MKW lineup.\u003c\/p\u003e\u003cp\u003eSplit Seven-Spoke Design with Concave Face\u003c\/p\u003e\u003cp\u003eThe M142 runs a split seven-spoke layout with a concave face that gives the wheel visual depth from any angle. Seven split spokes fan outward from the hub, each pair creating a layered, dimensional look that suits the scale of a 24-inch diameter. The Gloss Black Asphalt finish coats the entire face in a deep, high-gloss black that holds its presence against brake dust and road grime. Lug hardware sits exposed around the hub bore, visible on the face in a circle around the center mount point, adding a hardware-forward detail to the overall look. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Cast Alloy Construction\u003c\/p\u003e\u003cp\u003eThe M142 is cast in one piece from alloy, a construction that supports the complex split-spoke geometry and concave face profile in a single continuous shape. Cast alloy has earned its place as the most-used construction in aftermarket wheel manufacturing for good reason: it delivers proven structural integrity and long-haul value at a price point that makes a 24-inch build accessible. At 51 lbs, the wheel carries the weight appropriate for its size and load rating of 2,100 lbs. Backspacing measures 6.29 inches, and the 106.10mm hub bore fits the 6x139.7 platforms listed above.\u003c\/p\u003e\u003cp\u003eFitment Details for the 6x139.7 Lineup\u003c\/p\u003e\u003cp\u003eAt 24 inches in diameter, the M142 is a show-presence wheel that commands attention on full-size and mid-size truck builds alike. The +20mm offset places the mounting surface forward of the wheel's centerline, keeping the wheel positioned closer to the vehicle's face side. At 10 inches wide with a +20mm offset, this is a truck-scaled fitment that sits within the fender arch rather than pushing outward for an aggressive poke stance. The result is a clean, planted look that works across stock, leveled, and lifted setups on Silverado, Sierra, Tundra, Tacoma, and the other verified 6x139.7 platforms in this wheel's fitment universe. The M142 is also offered in additional sizes and finishes across the MKW lineup for builds with different fitment targets.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e6.29\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack Asphalt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2100 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e51 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"MKW Offroad","offers":[{"title":"Default Title","offer_id":68713173352729,"sku":"M142-2410655020GA","price":511.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/m142_blackasphalt_white__46307.jpg?v=1794773134"},{"product_id":"24x10-silver-machined-wheel-m142-6x5-5-20-m142-2410655020m","title":"M142 Silver Machined | 24x10 | 6x5.5 +20mm Offset | M142-2410655020M","description":"\u003cp\u003eA 24-Inch Wheel Built for Truck Presence\u003c\/p\u003e\u003cp\u003eAt 24 inches, the MKW M142 is squarely in show-wheel territory, the kind of size that commands attention at a truck meet or on the street. This silver machined finish pairs a silver background with machined spoke faces that bring out the detail in the split seven-spoke design, giving the wheel a two-tone contrast that suits the scale of a full-size truck build. The 10-inch width and +20mm offset place the mounting surface slightly forward of centerline, keeping the wheel positioned within the fender arch for a clean, tucked look on full-size platforms.\u003c\/p\u003e\u003cp\u003eSplit Seven-Spoke Design with Concave Profile\u003c\/p\u003e\u003cp\u003eThe M142 runs a split seven-spoke layout with a concave face, so the spokes angle inward from the hub toward the outer edge, adding visual depth to the 24-inch diameter. Lug hardware is exposed and visible on the face around the hub bore, sitting in a circle at the center of the wheel where it mounts to the vehicle. That hardware detail, combined with the machined spoke faces, gives the M142 a layered look that holds up at this size. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eThe M142 is cast in one-piece alloy, a construction that supports the complex spoke geometry and concave profile in a single continuous shape. Cast alloy carries the deep spoke contours and hub detail without the assembly complexity of multi-piece construction, and it delivers proven long-haul value for a wheel that will see regular use on a daily-driven truck. At 51 lbs, the weight is consistent with what a 24-inch alloy wheel of this design carries. Backspacing measures 6.29 inches.\u003c\/p\u003e\u003cp\u003eFitment Across the 6x139.7 Platform\u003c\/p\u003e\u003cp\u003eThe Chevrolet Silverado 1500 (1999-2026) and GMC Sierra 1500 (2000-2026) are the natural home for this wheel, and it also fits the Toyota Tacoma (1995-2026), Toyota Tundra (2000-2026), and Chevrolet K1500 (1988-1999), among 10 additional verified platforms across the 6x139.7 (6x5.5) bolt pattern. The 106.10mm hub bore fits these 6x139.7 platforms. With 114 total verified fitments, this wheel covers a wide range of the most popular 6-lug truck applications. The M142 is also offered in additional sizes, widths, and finishes across the MKW lineup for builds with different fitment needs.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e6.29\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSilver Machined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2100 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e51 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"MKW Offroad","offers":[{"title":"Default Title","offer_id":68713173647641,"sku":"M142-2410655020M","price":511.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/m142_silvermachined_white__71992.jpg?v=1794773135"},{"product_id":"20x9-black-wheel-m203-5x150-1-m203-2090515001a","title":"M203 Black | 20x9 | 5x150 +1mm Offset | M203-2090515001A","description":"\u003cp\u003eSeven Spokes, Simulated Beadlock Ring\u003c\/p\u003e\u003cp\u003eThe MKW Offroad M203 brings a rugged, off-road-ready aesthetic to the 5x150 platform in a 20x9 format. The face features seven spokes with a concave profile, and the outer ring carries a simulated beadlock treatment that gives the wheel the visual character of a purpose-built off-road setup without the weight or complexity of a functional locking ring. Lug hardware sits exposed around the hub bore, visible on the face in a circle at the center of the wheel. The 5.04 inches of backspacing and a +1mm offset place the mounting surface nearly at the wheel's centerline, keeping the wheel positioned close to the hub rather than pushing it outboard.\u003c\/p\u003e\u003cp\u003eSatin Black Finish\u003c\/p\u003e\u003cp\u003eThe finish is Satin Black, a low-sheen surface that holds up well against road film and brake dust without demanding the upkeep of a polished or chrome wheel. The satin tone suits the M203's off-road styling and pairs naturally with the exposed lug hardware and beadlock ring detail. A center cap (MKC-E058SB) is included with this wheel.\u003c\/p\u003e\u003cp\u003eCast Alloy Construction\u003c\/p\u003e\u003cp\u003eThe M203 is a one-piece cast alloy wheel. At 37 lbs, it comes in just under the typical weight for a 20-inch alloy truck wheel in this class. The one-piece construction means no seams or joints between sections, and the 110mm hub bore fits the 5x150 platforms this wheel is built for.\u003c\/p\u003e\u003cp\u003eFitment for the 5x150 Platform\u003c\/p\u003e\u003cp\u003eThe 5x150 bolt pattern fits the Toyota Tundra (2007-2021), with 4 additional verified fits across the 5x150 universe, including Sequoia, Land Cruiser 200, and Lexus LX 570 applications. The 2,600-lb load rating is appropriate for full-size truck use. This wheel is verified across 5 platforms in total. The M203 is also offered in additional sizes and finish options for builds with different fitment requirements.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x150\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5.04\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e110 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e37 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"MKW Offroad","offers":[{"title":"Default Title","offer_id":68713174040857,"sku":"M203-2090515001A","price":365.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/m203_black_white__94709.jpg?v=1794773136"},{"product_id":"17x8-5-black-wheel-m203-5x5-0-m203-1785512700a","title":"M203 Black | 17x8.5 | 5x5 0mm Offset | M203-1785512700A","description":"\u003cp\u003eSeven Spokes, Simulated Beadlock Style\u003c\/p\u003e\u003cp\u003eThe MKW Offroad M203 brings a rugged, off-road-ready aesthetic to the 5x127 (5x5) bolt pattern in a 17x8.5 size. Seven spokes radiate from the hub in a concave profile, and the outer ring of the face carries a simulated beadlock ring that gives the wheel a trail-ready look without the complexity of a functional locking ring. Lug hardware sits exposed around the hub bore, visible on the face where the wheel mounts to the vehicle, adding to the utilitarian character of the design. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eSatin Black Finish\u003c\/p\u003e\u003cp\u003eThe finish is Satin Black with a simulated beadlock ring, giving the face a muted, non-reflective tone that suits the off-road styling of the M203. Satin black holds up well against road film and brake dust without demanding the upkeep of a polished or chrome surface, and the flat tone complements the aggressive face geometry without competing with it.\u003c\/p\u003e\u003cp\u003eCast Alloy Construction\u003c\/p\u003e\u003cp\u003eThe M203 is a one-piece cast alloy wheel. The single-piece construction means no welded joints or assembled sections, and the cast process supports the concave spoke profile and beadlock-style outer ring that define the wheel's look. At 26 lbs, it comes in slightly under the typical weight for a 17-inch alloy truck wheel in this class. The 2,600-lb load rating is sized for the truck and SUV platforms this bolt pattern serves. Backspacing measures 4.75 inches.\u003c\/p\u003e\u003cp\u003eFitment for 5x127 Platforms\u003c\/p\u003e\u003cp\u003eThe 78.10mm hub bore fits 5x127 platforms including the Jeep Wrangler (2007-2026), Jeep Grand Cherokee (1999-2026), Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), with 10 additional verified fits across the 5x127 universe. The 0mm offset places the mounting surface at the wheel's centerline, splitting the barrel evenly between inboard and outboard depth. At 8.5 inches wide with a 0mm offset, this wheel sits within standard truck fitment range rather than an aggressive outboard stance. The M203 is also offered in additional sizes and finishes across the MKW Offroad lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e8.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.75\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e78.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e26 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"MKW Offroad","offers":[{"title":"Default Title","offer_id":68713174368537,"sku":"M203-1785512700A","price":260.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/m203_black_white__35331.jpg?v=1794773137"},{"product_id":"17x8-5-bronze-black-wheel-m203-5x5-0-m203-1785512700z","title":"M203 Bronze Black | 17x8.5 | 5x5 0mm Offset | M203-1785512700Z","description":"\u003cp\u003eMatte Bronze Meets Simulated Beadlock Styling\u003c\/p\u003e\u003cp\u003eThe MKW Offroad M203 arrives in a Matte Bronze finish with a black simulated beadlock ring circling the outer face, giving the wheel a rugged, trail-ready character without the weight or complexity of a functional locking ring. The contrast between the warm matte bronze and the dark beadlock detail makes the face stand out on any build. Seven spokes radiate from the hub in a concave profile, and the lug hardware sits exposed around the hub bore, visible on the face as part of the wheel's overall look. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eCast Alloy Construction at 17 Inches\u003c\/p\u003e\u003cp\u003eThe M203 is a one-piece alloy wheel, cast as a single unit without welds or assembly seams. At 17x8.5 inches, it sits in a practical diameter range for trucks and SUVs running all-terrain tires. The wheel weighs 26 lbs, which comes in just under the typical weight for an alloy 17-inch truck wheel in this class. The 2,600-lb load rating covers the demands of full-size truck and SUV applications. Backspacing measures 4.75 inches.\u003c\/p\u003e\u003cp\u003eOffset and What It Means for Your Stance\u003c\/p\u003e\u003cp\u003eThe M203 runs a 0mm offset, meaning the mounting surface sits exactly at the wheel's centerline. Neither pushed inboard nor pulled outboard, a zero offset places the wheel symmetrically in the wheel well and tends to produce a flush, even stance. On the 5x127 (5x5) bolt pattern platforms this wheel fits, that positioning works well with stock and leveled setups alike.\u003c\/p\u003e\u003cp\u003eFitment Across 5x127 Platforms\u003c\/p\u003e\u003cp\u003eThe 5x127 (5x5) bolt pattern and 78.1mm hub bore fit a wide range of Jeep and domestic truck platforms. Verified fitment includes the Jeep Wrangler (2007-2026), Jeep Grand Cherokee (1999-2026), Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), with 10 additional verified platforms in the fitment universe. The M203 is also offered in additional sizes and finishes across the MKW Offroad lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e8.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.75\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e78.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBronze Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e26 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"MKW Offroad","offers":[{"title":"Default Title","offer_id":68713174728985,"sku":"M203-1785512700Z","price":260.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/m203_bronzeblack_white__89057.jpg?v=1794773138"},{"product_id":"17x8-5-gray-black-wheel-m203-5x5-0-m203-1785512700g","title":"M203 Gray Black | 17x8.5 | 5x5 0mm Offset | M203-1785512700G","description":"\u003cp\u003eMatte Gray Finish with a Simulated Beadlock Ring\u003c\/p\u003e\u003cp\u003eThe MKW Offroad M203 arrives in a Matte Gray finish accented by a black simulated beadlock ring around the outer edge. The matte surface keeps the look subdued and purposeful, while the black ring adds a layered, off-road-ready visual contrast without the maintenance demands of a polished or chrome finish. The concave face adds depth to the profile, and the outer lip gives the wheel a defined edge that suits the aggressive character of the design.\u003c\/p\u003e\u003cp\u003eSeven-Spoke Face with Exposed Lug Hardware\u003c\/p\u003e\u003cp\u003eSeven spokes radiate from the hub area outward across the face, giving the wheel an open, airy structure that works well with the concave geometry. Lug hardware sits exposed in a circle around the hub bore at the center of the face, visible once the center cap is removed. A center cap is included with this wheel, covering the lug hardware when installed for a cleaner look on street use. The combination of exposed lugs and the simulated beadlock ring gives the M203 a trail-ready aesthetic that suits builds where the look of the wheel is part of the statement.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction at 0mm Offset\u003c\/p\u003e\u003cp\u003eThe M203 is a one-piece alloy wheel, formed as a single continuous unit without welded joints or assembled sections. At 17 inches in diameter and 8.5 inches wide, it runs a 0mm offset, meaning the mounting surface sits exactly at the wheel's centerline. That neutral offset positions the face flush with the hub rather than pushing outboard or pulling inboard, making it a versatile fit across a range of suspension heights. Backspacing measures 4.75 inches. The 2,600-lb load rating covers standard truck and SUV applications across the verified fitment range. At 26 lbs, the M203 comes in slightly under the typical weight for an alloy 17-inch truck wheel in this class.\u003c\/p\u003e\u003cp\u003eFitment for 5x127 (5x5) Platforms\u003c\/p\u003e\u003cp\u003eThe 5x127 bolt pattern and 78.1mm hub bore fit Jeep Wrangler (2007-2026), Jeep Grand Cherokee (1999-2026), Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), among 10 additional verified platforms. The M203 is also offered in additional sizes and finish options to suit different builds across the same bolt-pattern family.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e8.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.75\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e78.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eGray Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e26 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"MKW Offroad","offers":[{"title":"Default Title","offer_id":68713175154969,"sku":"M203-1785512700G","price":260.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/m203_grayblack_white__24848.jpg?v=1794773139"},{"product_id":"20x9-bronze-black-wheel-m203-5x5-1-m203-2090512701z","title":"M203 Bronze Black | 20x9 | 5x5 +1mm Offset | M203-2090512701Z","description":"\u003cp\u003eSeven Spokes, Simulated Beadlock Ring\u003c\/p\u003e\u003cp\u003eThe MKW Offroad M203 brings a matte bronze finish together with a black simulated beadlock ring for a look that suits builds chasing an off-road-ready aesthetic without committing to a functional beadlock setup. Seven spokes radiate from the hub in a concave face profile, and the lug hardware sits exposed in a circle around the hub bore, visible on the face where the wheel mounts to the vehicle. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eFinish and Face Details\u003c\/p\u003e\u003cp\u003eThe finish tells the full story here: matte bronze surfaces across the face and barrel, contrasted by the black simulated beadlock ring at the outer edge. The matte texture keeps the finish low-maintenance through daily driving and seasonal exposure. Concave depth behind the spokes adds visual dimension to the face, and the outer lip frames the transition to the beadlock ring. The exposed lug hardware around the hub adds a purposeful, hardware-forward look that suits the M203's off-road character.\u003c\/p\u003e\u003cp\u003eDimensions and Offset\u003c\/p\u003e\u003cp\u003eThis wheel runs a 20-inch diameter and 9-inch width. The +1mm offset places the mounting surface almost exactly at the wheel's centerline, keeping the wheel positioned close to a neutral track width. Backspacing measures 5.04 inches. The 78.10mm hub bore fits 5x127 (5x5) platforms. Load rating is 2,600 lbs per wheel. At 37 lbs, this one-piece alloy wheel sits close to the typical weight for a 20-inch alloy truck wheel in this class.\u003c\/p\u003e\u003cp\u003eFitment for 5x127 (5x5) Platforms\u003c\/p\u003e\u003cp\u003eThe 5x127 bolt pattern covers Jeep Wrangler JK and JL generations (2007-2026), Jeep Grand Cherokee (1999-2026), Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), among 10 additional verified platforms across 32 total fitment applications. The M203 is also offered in additional sizes and finish options to suit a range of builds across the 5x127 fitment universe.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5.04\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e78.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBronze Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e37 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"MKW Offroad","offers":[{"title":"Default Title","offer_id":68713175515417,"sku":"M203-2090512701Z","price":365.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/m203_bronzeblack_white__64326.jpg?v=1794773140"},{"product_id":"20x9-black-wheel-m203-6x135-1-m203-2090613501a","title":"M203 Black | 20x9 | 6x135 +1mm Offset | M203-2090613501A","description":"\u003cp\u003eSeven Spokes, Simulated Beadlock Ring\u003c\/p\u003e\u003cp\u003eThe MKW Offroad M203 brings a rugged off-road aesthetic to the 20x9 format with a satin black finish and a simulated beadlock ring that circles the outer face. That ring is a cosmetic detail, not a functional locking mechanism, but it delivers the visual weight of a purpose-built off-road wheel without the added complexity. Seven spokes radiate from the hub in a concave profile, giving the face depth and dimension that a flat disc cannot match. The exposed lug hardware sits in a circle around the hub bore, visible on the face and adding to the utilitarian character of the design. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eSatin Black Finish Built for Trucks\u003c\/p\u003e\u003cp\u003eThe satin black finish sits between matte and gloss, offering a low-sheen surface that holds its look through daily driving and seasonal exposure. It suits the M203's off-road-influenced styling without the high-maintenance demands of a polished or chrome surface. Brake dust and road film are less visible on a satin surface than on a bright finish, which keeps the wheel looking intentional between washes.\u003c\/p\u003e\u003cp\u003eOffset and Dimensions\u003c\/p\u003e\u003cp\u003eAt 20x9 with a +1mm offset, the mounting surface sits almost exactly at the wheel's centerline. That near-zero offset positions the barrel evenly split between inboard and outboard of the hub, keeping the wheel's track close to the factory line rather than pushing it outboard. Backspacing measures 5.04 inches. The 87mm hub bore fits the 6x135 bolt pattern platforms this wheel is drilled for, and the 2,600-lb load rating is appropriate for full-size truck applications.\u003c\/p\u003e\u003cp\u003eFitment for Ford 6x135 Platforms\u003c\/p\u003e\u003cp\u003eThe 6x135 bolt pattern covers the Ford F-150 (2004-2026), Ford Expedition (2003-2027), Lincoln Navigator (2003-2027), Ford F-150 Lightning (2022-2026), and Ford Bronco (2022-2026), plus one additional verified platform. At 37 lbs, the M203 comes in just under the typical weight for a cast alloy 20-inch truck wheel in this class. The one-piece alloy construction keeps the design straightforward and the profile consistent across the face.\u003c\/p\u003e\u003cp\u003eThe M203 is also offered in additional sizes, widths, and finishes across the MKW Offroad lineup to suit a range of build targets.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x135\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5.04\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e37 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"MKW Offroad","offers":[{"title":"Default Title","offer_id":68713175875865,"sku":"M203-2090613501A","price":365.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/m203_black_white__28415.jpg?v=1794773141"},{"product_id":"20x9-gray-black-wheel-m203-5x5-1-m203-2090512701g","title":"M203 Gray Black | 20x9 | 5x5 +1mm Offset | M203-2090512701G","description":"\u003cp\u003eSeven-Spoke Concave Face with Simulated Beadlock\u003c\/p\u003e\u003cp\u003eThe MKW Offroad M203 brings a purpose-built off-road aesthetic to the 5x127 (5x5) bolt pattern in a 20x9 footprint. Seven spokes sweep inward toward a concave face, framed by a black simulated beadlock ring that gives the wheel the visual character of a true beadlock without the added complexity. The matte gray finish across the face and spokes contrasts sharply against the black ring, creating a two-tone look that suits builds going for an aggressive, trail-ready appearance. Lug hardware sits exposed around the hub area, adding to the utilitarian character of the face rather than hiding behind a cap.\u003c\/p\u003e\u003cp\u003eOffset and Fitment Geometry\u003c\/p\u003e\u003cp\u003eAt +1mm offset, the mounting surface sits almost exactly at the wheel's centerline, placing the barrel evenly split between inboard and outboard. For the 5x127 (5x5) bolt pattern, that near-zero offset positions the wheel face close to flush with the fender plane on most applications, a natural fit for trucks and SUVs running a leveling kit or moderate lift kit where outboard clearance is already opened up. Backspacing measures 5.04 inches. The 78.10mm hub bore fits Jeep Wrangler, Grand Cherokee, Ram 1500, and other 5x127 platforms.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eThe M203 is cast as a single piece of alloy, forming the face, spokes, and barrel from one continuous structure. At 37 lbs, it comes in just under the typical weight for a 20-inch alloy truck wheel in this class. The 2,600-lb load rating covers full-size truck and SUV applications across the verified fitment range. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eVerified Fitment Across 5x127 Platforms\u003c\/p\u003e\u003cp\u003eThe M203 in this 20x9 setup fits the Jeep Wrangler (2007-2026), Jeep Grand Cherokee (1999-2026), Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), with 10 additional verified platforms across the 5x127 fitment universe, totaling 32 confirmed applications. The M203 is also offered in additional sizes, widths, and finish options across the lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5.04\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e78.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eGray Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e37 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"MKW Offroad","offers":[{"title":"Default Title","offer_id":68713176400153,"sku":"M203-2090512701G","price":365.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/m203_grayblack_white__90065.jpg?v=1794773142"},{"product_id":"20x9-black-wheel-m203-6x135-12-m203-2090613512a","title":"M203 Black | 20x9 | 6x135 +12mm Offset | M203-2090613512A","description":"\u003cp\u003eSeven Spokes, Simulated Beadlock Ring\u003c\/p\u003e\u003cp\u003eThe MKW Offroad M203 is a one-piece alloy wheel in a 20x9 format with a satin black finish and a simulated beadlock ring that gives the face an off-road-ready look without the weight or complexity of a functional locking ring. Seven spokes radiate from the hub in a concave profile, and the exposed lug hardware sits in a circle around the hub bore where the wheel mounts to the vehicle, keeping the hardware visible as part of the face's overall character. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eSatin Black Finish and Face Details\u003c\/p\u003e\u003cp\u003eThe satin black finish sits between a flat matte and a full gloss, giving the wheel a subdued, low-sheen appearance that holds up well against road film and brake dust without demanding constant attention. The simulated beadlock ring traces the outer edge of the face, adding visual mass and an aggressive off-road aesthetic. The concave face geometry pulls the spokes back from the outer ring, adding depth to the profile. No machined or milled surfaces break the finish, so the satin tone is consistent across the entire face.\u003c\/p\u003e\u003cp\u003eOffset and Fitment Geometry\u003c\/p\u003e\u003cp\u003eAt +12mm offset, the mounting surface sits slightly forward of the wheel's centerline, positioning the face closer to the outer edge of the hub assembly. On a 9-inch-wide barrel with 5.47 inches of backspacing, this keeps the wheel seated within a typical truck fender envelope. The 87mm hub bore fits the 6x135 bolt pattern platforms this wheel is built for. The 2,600-lb load rating covers standard half-ton truck applications.\u003c\/p\u003e\u003cp\u003eVerified Ford Platform Fitment\u003c\/p\u003e\u003cp\u003eThe M203 fits the Ford F-150 (2004-2026), Ford Expedition (2003-2027), Lincoln Navigator (2003-2027), Ford F-150 Lightning (2022-2026), and Ford Bronco (2022-2026), with one additional verified platform in the fitment universe. The 6x135 bolt pattern is the native pattern for Ford full-size trucks and SUVs across these generations, and the 87mm hub bore fits these platforms without modification. The M203 is also offered in additional sizes and finishes across the lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x135\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5.47\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e37 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"MKW Offroad","offers":[{"title":"Default Title","offer_id":68713176760601,"sku":"M203-2090613512A","price":365.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/m203_black_white__85435.jpg?v=1794773144"},{"product_id":"20x9-bronze-black-wheel-m204-5x150-12-m204-2090515012z","title":"M204 Bronze Black | 20x9 | 5x150 +12mm Offset | M204-2090515012Z","description":"\u003cp\u003eMatte Bronze Meets Simulated Beadlock Styling\u003c\/p\u003e\u003cp\u003eThe MKW Offroad M204 arrives in a Matte Bronze finish with a black simulated beadlock ring that circles the outer face, giving the wheel a rugged, trail-ready character without the weight or complexity of a functional locking ring. The concave face draws the spokes inward for visual depth, and the exposed lug hardware sits in a circle around the hub bore where the wheel mounts to the vehicle, keeping the hardware visible as part of the design rather than hiding it behind a cap. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eThe M204 is cast as a single piece of alloy, forming the face, barrel, and hub in one continuous structure with no welded joints or assembled sections. At 37 lbs, the wheel comes in slightly under the typical weight for a 20-inch alloy truck wheel in this class. The 2,600-lb load rating supports full-size truck applications across the 5x150 platform.\u003c\/p\u003e\u003cp\u003eOffset and Dimensions for the 5x150 Platform\u003c\/p\u003e\u003cp\u003eAt 20x9 with a +12mm offset, the mounting surface sits just forward of the wheel's centerline, positioning the face closer to the fender plane than a neutral or negative offset would. The 110mm hub bore fits Toyota Tundra and other 5x150 platforms. Backspacing measures 5.47 inches. The 5x150 bolt pattern is specific to Toyota's full-size lineup, including the Tundra (2007-2021), with four additional verified fits across the 5x150 universe.\u003c\/p\u003e\u003cp\u003eFitment Details\u003c\/p\u003e\u003cp\u003eVerified fitment covers the Toyota Tundra from 2007 through 2021, along with four additional platforms in the 5x150 family. The M204 is also offered in additional sizes, widths, and finish options across the MKW Offroad lineup for builds that need a different combination.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x150\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5.47\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e110 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBronze Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e37 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"MKW Offroad","offers":[{"title":"Default Title","offer_id":68713177121049,"sku":"M204-2090515012Z","price":365.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/m204_bronzeblack_white__18212.jpg?v=1794773145"},{"product_id":"20x9-gray-black-wheel-m204-5x150-12-m204-2090515012g","title":"M204 Gray Black | 20x9 | 5x150 +12mm Offset | M204-2090515012G","description":"\u003cp\u003eSimulated Beadlock Style on a 5x150 Platform\u003c\/p\u003e\u003cp\u003eThe MKW Offroad M204 arrives in a Matte Gray finish with a black simulated beadlock ring circling the outer face, giving the wheel a rugged off-road character without the weight or maintenance of a functional locking ring. The concave face draws the spokes inward, adding visual depth to the profile. Exposed lug hardware sits in a circle around the 110mm hub bore, keeping the mounting hardware visible as part of the design rather than hiding it behind a cap. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOffset and Dimensions\u003c\/p\u003e\u003cp\u003eAt 20x9 with a +12mm offset, the mounting surface sits slightly forward of the wheel's centerline, positioning the face closer to the fender plane. The 5.47 inches of backspacing reflects that forward-of-center placement. For a 9-inch-wide wheel, this offset keeps the stance composed and proportional rather than pushing the wheel aggressively outboard. The 2,600-lb load rating supports full-size truck applications across the 5x150 platform.\u003c\/p\u003e\u003cp\u003eCast Alloy Construction\u003c\/p\u003e\u003cp\u003eThe M204 is a one-piece cast alloy wheel. The entire structure, from hub to barrel, is formed as a single continuous piece of aluminum, which eliminates any welded or bolted joints in the construction. At 37 lbs, the wheel comes in slightly under the typical weight for cast alloy 20-inch truck wheels in this class, a modest advantage for unsprung mass on daily-driven setups.\u003c\/p\u003e\u003cp\u003eFitment for the 5x150 Platform\u003c\/p\u003e\u003cp\u003eThe 5x150 bolt pattern and 110mm hub bore fit the Toyota Tundra (2007-2021), with 4 additional verified fits across the 5x150 universe, including the Sequoia, Land Cruiser 200, and Lexus LX 570. This wheel is verified across 5 total platforms. The M204 is also offered in additional sizes and finish options to cover a range of builds beyond this specific combination.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x150\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5.47\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e110 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eGray Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e37 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"MKW Offroad","offers":[{"title":"Default Title","offer_id":68713177514265,"sku":"M204-2090515012G","price":365.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/m204_grayblack_white__16389.jpg?v=1794773146"},{"product_id":"17x9-black-wheel-m204-5x5-0-m204-1790512700a","title":"M204 Black | 17x9 | 5x5 0mm Offset | M204-1790512700A","description":"\u003cp\u003eSatin Black with a Simulated Beadlock Ring\u003c\/p\u003e\u003cp\u003eThe MKW Offroad M204 arrives in a satin black finish with a simulated beadlock ring built into the outer face. The beadlock aesthetic gives the wheel a rugged, trail-ready character without the weight or complexity of a functional locking ring. Satin black keeps the finish subdued and purposeful, resisting glare while holding up to the road film and brake dust that come with daily driving. A center cap is included with this wheel, covering the lug hardware behind the hub for a clean center presentation.\u003c\/p\u003e\u003cp\u003eConcave Face and Exposed Lug Hardware\u003c\/p\u003e\u003cp\u003eThe M204 runs a concave face profile, drawing the center of the wheel inward and giving the design visual depth from the front. Lug hardware sits exposed in a circle around the hub bore at the center of the face, where the wheel mounts to the vehicle. That hardware becomes part of the visual, adding an industrial detail that suits the off-road character of the wheel. The outer lip frames the concave dish and works with the simulated beadlock ring to give the profile a layered, multi-element look.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eThis is a one-piece alloy wheel, cast as a single continuous unit rather than assembled from multiple sections. At 26 lbs, it comes in below the typical weight for a 17-inch alloy truck wheel in this class. The 5-inch backspacing and 0mm offset place the mounting surface at the wheel's centerline, positioning the barrel evenly between the hub face and the outer edge. The 78.10mm hub bore fits the 5x127 (5x5) bolt pattern platforms this wheel is drilled for. Load rating is 2,600 lbs.\u003c\/p\u003e\u003cp\u003eFitment for Jeep and Truck Platforms\u003c\/p\u003e\u003cp\u003eThe 5x127 (5x5) bolt pattern covers a broad range of Jeep and domestic truck applications. Verified fits include the Jeep Wrangler (2007-2026), Jeep Grand Cherokee (1999-2026), Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), with 10 additional verified platforms in the fitment universe. The M204 is also offered in additional sizes and finishes across the MKW Offroad lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e78.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e26 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"MKW Offroad","offers":[{"title":"Default Title","offer_id":68713177841945,"sku":"M204-1790512700A","price":260.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/m204_black_white__82334.jpg?v=1794773147"},{"product_id":"17x9-bronze-black-wheel-m204-5x5-0-m204-1790512700z","title":"M204 Bronze Black | 17x9 | 5x5 0mm Offset | M204-1790512700Z","description":"\u003cp\u003eMatte Bronze with a Simulated Beadlock Ring\u003c\/p\u003e\u003cp\u003eThe MKW Offroad M204 arrives in a Matte Bronze finish with a black simulated beadlock ring circling the outer barrel. The contrast between the warm bronze face and the dark ring gives the wheel a trail-ready visual character without the weight or complexity of a functional beadlock setup. A center cap is included, covering the lug hardware behind the hub for a cleaner look at the center of the face. The exposed lug hardware sits in a circle around the hub bore where the wheel mounts to the vehicle, visible when the cap is removed.\u003c\/p\u003e\u003cp\u003eConcave Face and Spoke Profile\u003c\/p\u003e\u003cp\u003eThe M204 runs a concave face, pulling the spoke plane inward from the outer lip and adding depth to the overall profile. The design works well on builds where the wheel is meant to be noticed from a distance, with the concavity creating shadow and dimension across the face. The outer lip is present and visible, framing the concave face geometry.\u003c\/p\u003e\u003cp\u003eCast Alloy Construction at 17x9\u003c\/p\u003e\u003cp\u003eThis is a one-piece cast alloy wheel at 17 inches in diameter and 9 inches wide. The 0mm offset places the mounting surface exactly at the wheel's centerline, splitting the barrel evenly between inboard and outboard. At 5 inches of backspacing, the wheel sits in a neutral position relative to the hub. The 2,600-lb load rating covers full-size truck and SUV applications, and the 78.10mm hub bore fits the 5x127 (5x5) platforms this wheel is drilled for. At 26 lbs, the M204 comes in below the typical weight for a cast alloy 17-inch truck wheel in this class.\u003c\/p\u003e\u003cp\u003eFitment for 5x127 (5x5) Platforms\u003c\/p\u003e\u003cp\u003eThe 5x127 (5x5) bolt pattern covers Jeep Wrangler JK and JL generations (2007-2026), Jeep Grand Cherokee (1999-2026), Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), along with 10 additional verified platforms across 32 total fitments. If your build is based on one of these platforms, the M204 drops into the bolt pattern without any adapter hardware needed by default. The M204 is also offered in additional sizes and finish options for builds with different requirements.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e78.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBronze Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e26 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"MKW Offroad","offers":[{"title":"Default Title","offer_id":68713178267929,"sku":"M204-1790512700Z","price":270.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/m204_bronzeblack_white__95153.jpg?v=1794773148"},{"product_id":"17x9-gray-black-wheel-m204-5x5-0-m204-1790512700g","title":"M204 Gray Black | 17x9 | 5x5 0mm Offset | M204-1790512700G","description":"\u003cp\u003eMatte Gray Finish with a Simulated Beadlock Ring\u003c\/p\u003e\u003cp\u003eThe MKW Offroad M204 arrives in a Matte Gray finish accented by a black simulated beadlock ring around the outer face. The matte surface keeps the look subdued and purposeful, while the black ring adds a layered, off-road-ready visual character without the weight or complexity of a functional beadlock. The concave face profile adds depth to the design, and the 5-inch backspacing places the mounting surface at the wheel's centerline for a neutral, balanced stance.\u003c\/p\u003e\u003cp\u003eExposed Lugs and a Concave Face\u003c\/p\u003e\u003cp\u003eThe M204 runs exposed lug hardware, visible in a circle around the hub bore at the center of the face. On builds where the lug hardware is part of the visual statement, the open hub area keeps that hardware on display rather than tucking it behind a cap. The concave face geometry draws the eye inward toward the hub, giving the wheel a sense of depth that flat-face designs do not offer. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eCast Alloy Construction at a Practical Weight\u003c\/p\u003e\u003cp\u003eThis is a one-piece cast alloy wheel. The single-piece construction means no welded seams or assembled sections, and the 17-inch diameter keeps the overall package manageable for daily-driven trucks and Jeeps. At 26 lbs, the M204 comes in noticeably under the typical weight for an alloy 17-inch truck wheel in this class. The 78.10mm hub bore fits 5x127 (5x5) platforms, and the 2,600-lb load rating supports full-size truck and SUV applications.\u003c\/p\u003e\u003cp\u003eFitment for 5x127 Platforms\u003c\/p\u003e\u003cp\u003eThe 5x127 (5x5) bolt pattern covers a wide range of Jeep and domestic truck platforms. Verified fits include the Jeep Wrangler (2007-2026), Jeep Grand Cherokee (1999-2026), Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), with 10 additional verified platforms in the fitment universe. The 0mm offset positions the mounting surface at the wheel's centerline, making this a straightforward fit across the 32 verified applications without pushing the wheel aggressively inboard or outboard.\u003c\/p\u003e\u003cp\u003eSize and Finish Options\u003c\/p\u003e\u003cp\u003eThe M204 is offered across additional sizes, widths, and finish options beyond this 17x9 Matte Gray with Black Simulated Beadlock, so if this particular setup does not match your build, other configurations in the lineup may be worth exploring.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e78.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eGray Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e26 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"MKW Offroad","offers":[{"title":"Default Title","offer_id":68713178693913,"sku":"M204-1790512700G","price":270.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/m204_grayblack_white__76623.jpg?v=1794773149"},{"product_id":"18x9-bronze-black-wheel-m204-5x5-12-m204-18905127-12z","title":"M204 Bronze Black | 18x9 | 5x5 -12mm Offset | M204-18905127-12Z","description":"\u003cp\u003eMatte Bronze Meets Simulated Beadlock Styling\u003c\/p\u003e\u003cp\u003eThe MKW Offroad M204 arrives in a matte bronze finish with a black simulated beadlock ring circling the outer face, giving the wheel a rugged, trail-ready look without the weight or complexity of a functional locking ring. The concave face pulls the spokes inward for added visual depth, and the exposed lug hardware sits in a circle around the hub bore where the wheel mounts to the vehicle, keeping the hardware visible as part of the design rather than hidden behind a cap. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eThe M204 is a one-piece alloy wheel, cast as a single continuous unit with no welded joints or assembled sections. That construction keeps the structure consistent across the barrel and face, and at 29 lbs this wheel comes in noticeably under the typical weight for an 18-inch alloy truck wheel in this class. The 2,600-lb load rating supports full-size truck and SUV applications across the platforms this wheel fits.\u003c\/p\u003e\u003cp\u003eOffset and Dimensions\u003c\/p\u003e\u003cp\u003eAt 18x9 with a -12mm offset, the mounting surface sits rearward of the wheel's centerline, pushing the face outboard from the hub. That outboard positioning gives the build a wider visual stance compared to a zero or positive offset wheel of the same width. Backspacing measures 4.53 inches. The 78.10mm hub bore fits 5x127 (5x5) platforms across the verified fitment range.\u003c\/p\u003e\u003cp\u003eFitment for Jeep, Ram, and Classic GM Platforms\u003c\/p\u003e\u003cp\u003eThe 5x127 (5x5) bolt pattern covers a broad range of applications. Verified fitment includes the Jeep Wrangler (2007-2026), Jeep Grand Cherokee (1999-2026), Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), with 10 additional verified platforms in the fitment universe of 32 total. The M204 is also offered in additional sizes, widths, and finish options to suit different builds and bolt-pattern needs across the MKW Offroad lineup.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.53\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e78.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBronze Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e29 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"MKW Offroad","offers":[{"title":"Default Title","offer_id":68713178988825,"sku":"M204-18905127-12Z","price":282.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/m204_bronzeblack_white__05483.jpg?v=1794773150"},{"product_id":"18x9-gray-black-wheel-m204-5x5-12-m204-18905127-12g","title":"M204 Gray Black | 18x9 | 5x5 -12mm Offset | M204-18905127-12G","description":"\u003cp\u003eMatte Gray Finish with a Simulated Beadlock Ring\u003c\/p\u003e\u003cp\u003eThe MKW Offroad M204 arrives in a matte gray finish accented by a black simulated beadlock ring around the outer face. The contrast between the gray spokes and the black ring gives the wheel a trail-ready visual character without the weight or complexity of a functional beadlock. The concave face adds depth to the profile, and the exposed lug hardware sits in a circle around the hub bore, keeping the mounting hardware visible as part of the overall look. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eSpoke Design and Construction\u003c\/p\u003e\u003cp\u003eThe M204 is a one-piece alloy wheel. The face carries a spoke layout with a concave dish that draws the eye inward toward the hub, while the simulated beadlock ring frames the outer edge. At 29 lbs, this wheel comes in noticeably under the typical weight for an 18-inch alloy truck wheel in this class, which runs closer to 33 lbs. That difference is meaningful across a set of four. Backspacing measures 4.53 inches.\u003c\/p\u003e\u003cp\u003eOffset and Stance on 5x127 Platforms\u003c\/p\u003e\u003cp\u003eAt -12mm, the mounting surface sits rearward of the wheel's centerline, pushing the face outboard relative to the hub. On a 9-inch-wide wheel, that offset positions the face with a more outboard stance than stock, giving the build a wider visual track without crossing into the most aggressive fitment territory. The 78.1mm hub bore fits 5x127 (5x5) platforms across the verified fitment range.\u003c\/p\u003e\u003cp\u003eFitment Across Jeep and Truck Platforms\u003c\/p\u003e\u003cp\u003eThe M204 fits the Jeep Wrangler from 2007 through 2026, including JK and JL generations, and the Jeep Grand Cherokee from 1999 through 2026. It also fits the Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), with 10 additional verified platforms rounding out a fitment universe of 32 total applications. The 2,600-lb load rating covers the demands of full-size truck and SUV use across that range. The M204 is also offered in additional sizes and finish options for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.53\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e78.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eGray Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e29 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"MKW Offroad","offers":[{"title":"Default Title","offer_id":68713179316505,"sku":"M204-18905127-12G","price":282.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/m204_grayblack_white__83196.jpg?v=1794773151"},{"product_id":"18x9-bronze-black-wheel-m204-5x5-1-m204-1890512701z","title":"M204 Bronze Black | 18x9 | 5x5 +1mm Offset | M204-1890512701Z","description":"\u003cp\u003eMatte Bronze Meets Simulated Beadlock Styling\u003c\/p\u003e\u003cp\u003eThe MKW Offroad M204 arrives in a Matte Bronze finish with a black simulated beadlock ring that circles the outer face, giving the wheel a rugged, trail-ready character without the weight or complexity of a functional locking ring. The matte surface keeps the bronze tones subdued and purposeful, and the black beadlock ring adds a sharp contrast that suits builds going for an aggressive off-road aesthetic. A center cap is included with this wheel, covering the lug hardware for a cleaner look at the hub.\u003c\/p\u003e\u003cp\u003eConcave Face and Exposed Lug Hardware\u003c\/p\u003e\u003cp\u003eThe M204 runs a concave face profile, pulling the center of the wheel back from the outer edge and adding visual depth to the overall look. Lug hardware sits exposed around the hub bore at the center of the face, visible once the center cap is removed or when running without it. The combination of the concave dish and the simulated beadlock ring gives the face a layered, intentional appearance that works well on lifted Jeep and truck builds.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eThis wheel is cast as a single piece of aluminum alloy, forming the face, barrel, and hub from one continuous structure. There are no welded joints or assembled sections, which keeps the construction straightforward and consistent across the wheel. At 29 lbs, it comes in noticeably under the typical weight for an 18-inch alloy truck wheel in this class. Backspacing measures 5.04 inches, and the 2,600-lb load rating covers the demands of full-size truck and SUV applications.\u003c\/p\u003e\u003cp\u003eOffset and Bolt Pattern Details\u003c\/p\u003e\u003cp\u003eThe +1mm offset places the mounting surface almost exactly at the wheel's centerline, keeping the wheel positioned close to a neutral track width. On a 9-inch-wide barrel, this means the wheel sits without significant inboard or outboard bias, which works well for builds that want a clean, proportional stance without pulling the wheel dramatically outward. The 78.1mm hub bore fits 5x127 (5x5) platforms. Verified fitment includes the Jeep Wrangler (2007-2026), Jeep Grand Cherokee (1999-2026), Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), among 15 additional verified applications.\u003c\/p\u003e\u003cp\u003eAvailable Across the M204 Lineup\u003c\/p\u003e\u003cp\u003eThe M204 is offered across additional sizes, widths, and finish options beyond this 18x9 Matte Bronze setup, covering a range of bolt patterns including both 6-lug fitments for those on different platforms.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5.04\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e78.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBronze Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e29 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"MKW Offroad","offers":[{"title":"Default Title","offer_id":68713179644185,"sku":"M204-1890512701Z","price":282.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/m204_bronzeblack_white__26789.jpg?v=1794773152"},{"product_id":"20x9-black-wheel-m204-5x5-1-m204-2090512701a","title":"M204 Black | 20x9 | 5x5 +1mm Offset | M204-2090512701A","description":"\u003cp\u003eSatin Black Finish with Simulated Beadlock Detail\u003c\/p\u003e\u003cp\u003eThe MKW Offroad M204 arrives in a satin black finish with a simulated beadlock ring built into the face. The beadlock aesthetic gives the wheel an off-road-ready character without the weight or complexity of a functional locking ring. Satin black sits between matte and gloss, absorbing light rather than reflecting it, which keeps the finish looking clean through trail dust and road grime alike. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eConcave Face and Exposed Lug Hardware\u003c\/p\u003e\u003cp\u003eThe M204 runs a concave face profile, pulling the center of the wheel back from the outer edge to create visual depth across the disc. Lug hardware sits exposed in a circle around the hub bore, visible on the face where the wheel mounts to the vehicle. That hardware becomes part of the wheel's look rather than being hidden behind a cap, which suits the rugged, purposeful character of the design. The outer lip adds further dimension to the profile.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eThis wheel is cast as a single piece of alloy, forming the face, barrel, and hub from one continuous structure. There are no welded joints or assembled sections. The 2,600-lb load rating is appropriate for truck and SUV applications across the 5x127 (5x5) platform group. At 37 lbs, the wheel comes in slightly under the typical weight for a 20-inch alloy truck wheel in this class. Backspacing measures 5.04 inches.\u003c\/p\u003e\u003cp\u003eFitment for 5x127 Platforms\u003c\/p\u003e\u003cp\u003eThe 5x127 (5x5) bolt pattern and 78.1mm hub bore fit Jeep Wrangler (2007-2026), Jeep Grand Cherokee (1999-2026), Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), among 10 additional verified platforms. The +1mm offset places the mounting surface nearly at the wheel's centerline, keeping the wheel's position close to the hub without pushing inboard or pulling significantly outboard. This wheel is also offered in additional sizes and finish options across the M204 lineup.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5.04\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e78.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e37 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"MKW Offroad","offers":[{"title":"Default Title","offer_id":68713180070169,"sku":"M204-2090512701A","price":365.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/m204_black_white__50602.jpg?v=1794773153"},{"product_id":"20x9-bronze-black-wheel-m204-5x5-1-m204-2090512701z","title":"M204 Bronze Black | 20x9 | 5x5 +1mm Offset | M204-2090512701Z","description":"\u003cp\u003eMatte Bronze Meets Simulated Beadlock Styling\u003c\/p\u003e\u003cp\u003eThe MKW Offroad M204 arrives in a Matte Bronze finish with a black simulated beadlock ring that frames the outer face and gives the wheel a rugged, trail-ready character without the weight penalty of a functional locking ring. The concave face adds depth to the profile, and the exposed lug hardware sits in a circle around the hub bore, keeping the mounting hardware visible as part of the overall look. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eThe M204 is cast as a single piece of alloy, forming the face, barrel, and hub in one continuous structure. At 37 lbs, this wheel comes in slightly under the typical weight for a 20-inch alloy truck wheel in this class. The 2,600-lb load rating supports full-size truck and SUV applications across the platforms this wheel fits.\u003c\/p\u003e\u003cp\u003eOffset and Dimensions That Suit the Platform\u003c\/p\u003e\u003cp\u003eAt 20x9 with a +1mm offset, the mounting surface sits almost exactly at the wheel's centerline, placing the barrel evenly split between inboard and outboard. The 5.04 inches of backspacing keeps the inner barrel clear of suspension components on the platforms this wheel fits. The 78.10mm hub bore fits 5x127 (5x5) platforms directly. This is a 9-inch-wide wheel at a near-zero offset, so the stance sits close to the hub centerline rather than pushing outboard aggressively.\u003c\/p\u003e\u003cp\u003eFitment for 5x127 (5x5) Platforms\u003c\/p\u003e\u003cp\u003eThe M204 in this size fits the Jeep Wrangler (2007-2026), Jeep Grand Cherokee (1999-2026), Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), with 10 additional verified fits across the 5x127 (5x5) universe covering 32 total platforms. The 5x127 bolt pattern is the standard across Jeep JK and JL Wrangler generations, Grand Cherokee, and Ram 1500 applications through the pre-2019 generation, making this a natural fit for Jeep-based builds and older GM half-ton platforms. The M204 is also offered in additional sizes, widths, and finishes across the MKW Offroad lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5.04\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e78.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBronze Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e37 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"MKW Offroad","offers":[{"title":"Default Title","offer_id":68713180463385,"sku":"M204-2090512701Z","price":365.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/m204_bronzeblack_white__12238.jpg?v=1794773154"},{"product_id":"20x9-gray-black-wheel-m204-5x5-1-m204-2090512701g","title":"M204 Gray Black | 20x9 | 5x5 +1mm Offset | M204-2090512701G","description":"\u003cp\u003eMatte Gray Meets Simulated Beadlock Styling\u003c\/p\u003e\u003cp\u003eThe MKW Offroad M204 arrives in a matte gray finish with a black simulated beadlock ring that circles the outer face, giving the wheel a rugged, trail-ready look without the weight or complexity of a functional locking ring. The concave face draws the spokes inward toward the hub, adding depth to the profile. Lug hardware sits exposed around the hub bore, visible on the face and adding to the utilitarian character of the design. A center cap (MKC-E057MB) is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eThe M204 is a one-piece alloy wheel, formed as a single continuous unit rather than assembled from multiple sections. That construction keeps the structure consistent across the barrel and face without weld points or joint lines. At 37 lbs, the wheel falls close to the typical weight for a 20-inch alloy truck wheel in this class. Backspacing measures 5.04 inches.\u003c\/p\u003e\u003cp\u003eOffset and Fitment Geometry\u003c\/p\u003e\u003cp\u003eAt +1mm offset, the mounting surface sits almost exactly at the wheel's centerline. That near-zero offset positions the wheel face close to flush with the hub rather than pushing it outboard or pulling it inward, which suits builds where a centered, proportional stance is the goal. The 78.10mm hub bore fits the 5x127 (5x5) bolt pattern platforms this wheel is drilled for. The 2,600-lb load rating covers standard truck and SUV applications.\u003c\/p\u003e\u003cp\u003eWhat It Fits\u003c\/p\u003e\u003cp\u003eThe M204 in this 5x127 (5x5) bolt pattern fits the Jeep Wrangler (2007-2026), Jeep Grand Cherokee (1999-2026), Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), with 10 additional verified platforms across the 5x127 fitment universe. The M204 is also offered in additional sizes, widths, and finish options to suit a range of builds across the lineup.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5.04\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e78.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eGray Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e37 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"MKW Offroad","offers":[{"title":"Default Title","offer_id":68713180856601,"sku":"M204-2090512701G","price":365.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/m204_grayblack_white__29565.jpg?v=1794773155"},{"product_id":"18x9-black-wheel-m204-6x135-1-m204-1890613501a","title":"M204 Black | 18x9 | 6x135 +1mm Offset | M204-1890613501A","description":"\u003cp\u003eSatin Black Finish with Simulated Beadlock Ring\u003c\/p\u003e\u003cp\u003eThe MKW Offroad M204 arrives in a satin black finish with a simulated beadlock ring that gives the face a rugged, off-road-ready look without the weight or complexity of a functional beadlock setup. The satin sheen sits between matte and gloss, keeping the finish low-maintenance while holding its character through daily driving and seasonal exposure. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eConcave Face and Exposed Lug Hardware\u003c\/p\u003e\u003cp\u003eThe M204 features a concave face profile, pulling the spoke plane inward and giving the wheel visual depth when viewed from the side. Lug hardware sits exposed around the hub bore at the center of the face, visible once the center cap is removed, adding to the utilitarian, purpose-built aesthetic that defines MKW Offroad's truck-focused lineup. The outer lip reinforces the concave geometry, framing the face with a defined edge.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eThis wheel is built as a one-piece alloy casting. The single-piece structure means no welded joints or assembled sections, and the 29-lb weight comes in below the typical 33-lb benchmark for alloy 18-inch truck wheels in this class. The 2,600-lb load rating is sized for half-ton truck applications across the F-150 platform and its platform siblings.\u003c\/p\u003e\u003cp\u003eFitment for 6x135 Ford Platforms\u003c\/p\u003e\u003cp\u003eThe 6x135 bolt pattern and 87mm hub bore fit Ford F-150 (2004-2026), Ford Expedition (2003-2027), Lincoln Navigator (2003-2027), Ford F-150 Lightning (2022-2026), and Ford Bronco (2022-2026), with one additional verified platform in the fitment universe. The +1mm offset places the mounting surface nearly at the wheel's centerline, keeping the wheel positioned close to a neutral track width. Backspacing measures 5.04 inches. At 18x9, the width and near-zero offset suit trucks running leveling kits or moderate lift kits where a clean, proportional stance is the goal. The M204 is also offered in additional sizes, widths, and finishes across the MKW Offroad lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x135\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5.04\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e29 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"MKW Offroad","offers":[{"title":"Default Title","offer_id":68713181217049,"sku":"M204-1890613501A","price":282.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/m204_black_white__32281.jpg?v=1794773156"},{"product_id":"18x9-gray-black-wheel-m204-6x135-1-m204-1890613501g","title":"M204 Gray Black | 18x9 | 6x135 +1mm Offset | M204-1890613501G","description":"\u003cp\u003eSimulated Beadlock Styling on a Ford-Native Pattern\u003c\/p\u003e\u003cp\u003eThe MKW Offroad M204 arrives in an 18x9 one-piece alloy build with a matte gray finish and a black simulated beadlock ring that circles the outer face. The beadlock ring is cosmetic rather than functional, but it delivers the rugged off-road visual character associated with the style without the added weight or complexity of a true locking ring. Lug hardware sits exposed around the hub bore, visible on the face and adding to the utilitarian, trail-ready look the M204 is built around. A center cap (MKC-E059MB) is included.\u003c\/p\u003e\u003cp\u003eOffset and Dimensions\u003c\/p\u003e\u003cp\u003eAt +1mm offset, the mounting surface sits almost exactly at the wheel's centerline, placing the 9-inch-wide barrel in a near-neutral position relative to the hub. That geometry keeps the wheel tracking close to the factory stance line while still running a full 9-inch width. Backspacing measures 5.04 inches. The concave face profile adds visual depth behind the simulated beadlock ring, giving the design a layered look from the front. The 87mm hub bore fits the 6x135 bolt pattern platforms this wheel is built for.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eThe M204 is cast as a single piece of aluminum alloy, forming the face, barrel, and hub in one continuous structure. There are no welded joints or assembled sections to contend with. At 29 lbs, this wheel comes in noticeably under the typical weight for an 18-inch alloy truck wheel in this class, which runs closer to 33 lbs. The 2,600-lb load rating supports full-size truck applications across the F-150 platform.\u003c\/p\u003e\u003cp\u003eFitment for Ford 6x135 Platforms\u003c\/p\u003e\u003cp\u003eThe 6x135 bolt pattern is native to Ford's full-size truck and SUV lineup. This wheel fits the Ford F-150 (2004-2026), Ford Expedition (2003-2027), Lincoln Navigator (2003-2027), Ford F-150 Lightning (2022-2026), and Ford Bronco (2022-2026), with one additional verified platform in the fitment universe. The M204 is also offered in additional sizes, widths, and finish options across the broader lineup to suit different build directions.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x135\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5.04\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eGray Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e29 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"MKW Offroad","offers":[{"title":"Default Title","offer_id":68713181643033,"sku":"M204-1890613501G","price":282.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/m204_grayblack_white__58525.jpg?v=1794773157"},{"product_id":"17x9-black-wheel-m204-6x5-5-12-m204-17906550-12a","title":"M204 Black | 17x9 | 6x5.5 -12mm Offset | M204-17906550-12A","description":"\u003cp\u003eBuilt for the 6x139.7 Platform\u003c\/p\u003e\u003cp\u003eThe MKW Offroad M204 lands on one of the most widely shared 6-lug truck patterns in the aftermarket. The 6x139.7 (6x5.5) bolt pattern covers Chevrolet Silverado 1500 (1999-2026), GMC Sierra 1500 (2000-2026), Toyota Tacoma (1995-2026), Toyota Tundra (2000-2026), and Chevrolet K1500 (1988-1999), along with 10 additional verified platforms across 114 total fitments. The 106.10mm hub bore fits these platforms, and the 4.53 inches of backspacing positions the wheel correctly within the fender for this size and offset.\u003c\/p\u003e\u003cp\u003eSimulated Beadlock Style, Concave Face\u003c\/p\u003e\u003cp\u003eThe M204 wears a satin black finish with a simulated beadlock ring that gives the wheel the rugged, trail-ready look of a true beadlock without the added complexity. The face runs a concave profile, pulling the center of the wheel back toward the barrel for visual depth that suits the aggressive character MKW Offroad brings to its truck lineup. Exposed lug hardware sits in a circle around the hub bore, visible on the face and adding to the utilitarian, off-road-ready aesthetic. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eCast alloy one-piece construction gives the M204 the structural reliability that has made this build method the backbone of the aftermarket wheel industry. The one-piece form carries the concave face, simulated beadlock ring, and outer lip in a single continuous shape, keeping the design intact through the load cycles a full-size truck or mid-size pickup puts on its wheels. At 26 lbs, the M204 is a practical, long-haul choice for daily-driven trucks and weekend builds alike.\u003c\/p\u003e\u003cp\u003eOffset and Stance Details\u003c\/p\u003e\u003cp\u003eAt -12mm offset on a 9-inch-wide barrel, the mounting surface sits rearward of the wheel's centerline, moving the wheel face slightly outboard of stock positioning. This offset is a measured step toward a more outboard wheel position without going to an extreme negative, making it a versatile choice across stock, leveled, and lifted truck setups. The M204 is also offered in additional sizes and configurations across the lineup for builds that need a different fit.\u003c\/p\u003e\u003cp\u003eFitment Across the Lineup\u003c\/p\u003e\u003cp\u003eThe Silverado 1500 and Sierra 1500 are the natural home for this 6x139.7 wheel, and the Tacoma and Tundra fitment extends the M204's reach across both GM and Toyota full-size and mid-size truck platforms. Whether your build is running stock height, a leveling kit, or a full lift kit, the M204's proportions and offset work across the range of common truck setups on these platforms.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.53\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e26 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"MKW Offroad","offers":[{"title":"Default Title","offer_id":68713182036249,"sku":"M204-17906550-12A","price":270.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/m204_black_white__27375.jpg?v=1794773158"},{"product_id":"17x9-gray-black-wheel-m204-6x5-5-12-m204-17906550-12g","title":"M204 Gray Black | 17x9 | 6x5.5 -12mm Offset | M204-17906550-12G","description":"\u003cp\u003eBuilt for the 6x139.7 Platform\u003c\/p\u003e\u003cp\u003eThe MKW Offroad M204 lands on one of the most widely used 6-lug truck patterns in the market. The 6x139.7 (6x5.5) bolt pattern covers Chevrolet Silverado 1500 (1999-2026), GMC Sierra 1500 (2000-2026), Toyota Tacoma (1995-2026), Toyota Tundra (2000-2026), and Chevrolet K1500 (1988-1999), with 10 additional verified platforms in the fitment universe. The 106.10mm hub bore fits these platforms, and the 4.53 inches of backspacing positions the mounting surface for trucks running a lift kit. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eSimulated Beadlock Style, Concave Face\u003c\/p\u003e\u003cp\u003eThe M204 carries a matte gray finish across the face with a black simulated beadlock ring circling the outer edge. The beadlock ring frames the concave face and gives the wheel the rugged, trail-ready character that defines MKW Offroad's truck lineup. Exposed lug hardware sits in a circle around the hub bore, visible on the face and adding to the utilitarian look. The outer lip is present and visible behind the beadlock ring, completing the layered profile. The overall design suits trucks built for an aggressive, off-road-influenced stance.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eThe M204 is cast as a single piece in alloy, a construction that supports the complex concave face geometry and the beadlock ring detail without requiring assembly. Cast alloy handles the deep dish profile and contoured face in one continuous shape, delivering proven structural integrity across the full load cycle. At 26 lbs, the wheel carries the weight expected for this size and construction. The one-piece build keeps the design clean and consistent from hub to lip.\u003c\/p\u003e\u003cp\u003eFitment Details for Lifted Truck Builds\u003c\/p\u003e\u003cp\u003eAt 17x9 with a -12mm offset, the mounting surface sits rearward of the wheel's centerline, pushing the wheel outward relative to stock positioning. This outboard placement suits trucks running a lift kit, where the added ride height opens clearance for the wider track this offset produces. The 17-inch diameter pairs well with the larger tire sizes common on lifted full-size and mid-size truck builds. The M204 is also offered in additional sizes and finishes across the MKW Offroad lineup for builds with different fitment needs.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.53\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eGray Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e26 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"MKW Offroad","offers":[{"title":"Default Title","offer_id":68713182396697,"sku":"M204-17906550-12G","price":270.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/m204_grayblack_white__75212.jpg?v=1794773160"},{"product_id":"20x9-black-wheel-m204-6x5-5-12-m204-20906550-12a","title":"M204 Black | 20x9 | 6x5.5 -12mm Offset | M204-20906550-12A","description":"\u003cp\u003eSatin Black Finish with Simulated Beadlock Detail\u003c\/p\u003e\u003cp\u003eThe MKW Offroad M204 arrives in a Satin Black finish with a simulated beadlock ring that gives the face a rugged, trail-ready character without the weight or complexity of a functional beadlock. The matte-toned satin surface keeps the look intentional across seasons and driving conditions, and the beadlock ring adds a layered visual element that separates this wheel from a standard spoke design. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eConcave Face and Exposed Lug Hardware\u003c\/p\u003e\u003cp\u003eThe M204 runs a concave face profile, pulling the spoke plane inward so the outer barrel has more visual presence. Lug hardware sits exposed around the hub bore at the center of the face, visible in a circle where the wheel mounts to the vehicle. That hardware-forward detail pairs naturally with the simulated beadlock ring to give the overall face a purposeful, mechanical look. The one-piece alloy construction keeps the design clean with no seams or joint lines across the face or barrel.\u003c\/p\u003e\u003cp\u003eOffset and Stance on a 9-Inch Barrel\u003c\/p\u003e\u003cp\u003eAt -12mm offset, the mounting surface sits rearward of the wheel's centerline, pushing the face outboard relative to the hub. On a 9-inch-wide barrel, that positioning moves the wheel face toward the fender compared to a neutral or positive offset, giving the truck a wider visual track without crossing into the most aggressive fitment territory. Backspacing measures 4.53 inches. The 2,600-lb load rating covers standard half-ton truck applications, and the 106.10mm hub bore fits the 6x139.7 (6x5.5) platform group.\u003c\/p\u003e\u003cp\u003eFitment Across the 6x139.7 Platform\u003c\/p\u003e\u003cp\u003eThe M204 in this size fits the Chevrolet Silverado 1500 (1999-2026), GMC Sierra 1500 (2000-2026), Toyota Tacoma (1995-2026), Toyota Tundra (2000-2026), and Chevrolet K1500 (1988-1999), with 10 additional verified platforms in the fitment universe, covering 114 verified applications total. The 6x139.7 (6x5.5) bolt pattern is one of the most common 6-lug patterns across full-size and mid-size truck platforms, so this wheel covers a wide range of builds. The M204 is also offered in additional sizes, widths, and finish options across the MKW Offroad lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.53\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e37 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"MKW Offroad","offers":[{"title":"Default Title","offer_id":68713182789913,"sku":"M204-20906550-12A","price":365.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/m204_black_white__54348.jpg?v=1794773161"},{"product_id":"17x8-5-black-wheel-m205-5x150-10-m205-17855150-10a","title":"M205 Black | 17x8.5 | 5x150 -10mm Offset | M205-17855150-10A","description":"\u003cp\u003eBuilt for the 5x150 Platform\u003c\/p\u003e\u003cp\u003eToyota Tundra owners (2007-2021) running the 5x150 bolt pattern have a natural home in the MKW Offroad M205. The 5x150 pattern is shared across Toyota's full-size lineup, including the Tundra, Sequoia, Land Cruiser 200, and Lexus LX 570, and the M205's 110mm hub bore fits these platforms. With four additional verified fits beyond the Tundra, this wheel covers a solid range of Toyota full-size applications.\u003c\/p\u003e\u003cp\u003eSplit Five-Spoke Design with Simulated Beadlock\u003c\/p\u003e\u003cp\u003eThe M205 runs a split five-spoke layout with a concave face, giving the wheel visual depth that suits the aggressive character MKW Offroad brings to its truck-focused lineup. The standout detail is the simulated beadlock ring, which wraps the outer edge and delivers the rugged, trail-ready look of a beadlock wheel without the added weight or complexity. Lug hardware sits exposed on the face around the hub bore, visible and intentional as part of the overall design. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eThe M205 is cast in one-piece alloy, a construction that supports the complex geometry of the split-spoke design and concave profile in a single continuous shape. Cast alloy carries the structural integrity needed for full-size truck payloads and delivers the long-haul reliability that's made it the backbone of the aftermarket wheel market. At 26 lbs, the M205 is a practical choice for daily-driven Tundra builds.\u003c\/p\u003e\u003cp\u003eFitment Details\u003c\/p\u003e\u003cp\u003eAt 17x8.5 inches with a -10mm offset, the mounting surface sits rearward of the wheel's centerline, pushing the face slightly outward compared to a zero-offset wheel. On a Tundra running a lift kit or leveling kit, this offset works well with the wider stance those setups create. Backspacing measures 4.36 inches. The satin black finish with the simulated beadlock ring suits lifted builds where the off-road aesthetic is the goal.\u003c\/p\u003e\u003cp\u003eThe M205 is also offered in additional sizes and configurations across the lineup to cover a broader range of builds and bolt patterns.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e8.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x150\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.36\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e110 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e26 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"MKW Offroad","offers":[{"title":"Default Title","offer_id":68713183183129,"sku":"M205-17855150-10A","price":260.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/m205_black_white__72410.jpg?v=1794773162"},{"product_id":"17x8-5-bronze-black-wheel-m205-5x150-10-m205-17855150-10z","title":"M205 Bronze Black | 17x8.5 | 5x150 -10mm Offset | M205-17855150-10Z","description":"\u003cp\u003eBuilt for the Toyota 5x150 Platform\u003c\/p\u003e\u003cp\u003eToyota Tundra owners (2007-2021) running the 5x150 bolt pattern have a natural home in the MKW Offroad M205. The 110mm hub bore fits these Toyota platforms, and the verified fitment spans the Tundra alongside four additional 5x150 applications including the Sequoia, Land Cruiser 200, and Lexus LX 570. At 17x8.5 inches with a -10mm offset, the mounting surface sits rearward of the wheel's centerline, pushing the wheel slightly outboard for a more planted, assertive stance than a zero or positive offset would produce.\u003c\/p\u003e\u003cp\u003eSplit Five-Spoke Design with Simulated Beadlock\u003c\/p\u003e\u003cp\u003eThe M205 runs a split five-spoke face with a concave profile that draws the eye inward toward the hub. Each of the five split spokes tapers from the hub outward, giving the face visual depth without cluttering the design. The standout detail is the black simulated beadlock ring that circles the outer edge, adding a rugged, trail-ready character that suits the Tundra's platform well. Lug hardware sits exposed around the hub bore, visible on the face and adding to the utilitarian, off-road-ready look MKW Offroad brings to this wheel family.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eThe M205 is cast as a single piece in alloy, a construction that supports the complex spoke geometry and concave face profile in one continuous form. Cast alloy carries the deep spoke taper and outer lip in a unified shape, and at 26 lbs this wheel lands within a practical range for a 17-inch truck wheel. The one-piece build keeps the structure straightforward and the long-haul value strong for daily-driven and weekend-use Tundra builds alike.\u003c\/p\u003e\u003cp\u003eFinish and Visual Character\u003c\/p\u003e\u003cp\u003eThe matte bronze finish covers the face and spokes, giving the wheel a warm, earthy tone that pairs naturally with the black simulated beadlock ring. Matte bronze holds up well against brake dust and road grime without demanding constant attention, and the contrast between the bronze spokes and the black ring gives the M205 a layered, intentional look. A center cap is included with this wheel, covering the lug hardware when you want a cleaner presentation.\u003c\/p\u003e\u003cp\u003eFitment Details\u003c\/p\u003e\u003cp\u003eThe -10mm offset places the mounting surface just behind centerline, producing a modest outboard wheel position relative to stock. The 4.36-inch backspacing keeps the inner edge of the wheel clear of suspension components across the verified 5x150 fitment range. This 17x8.5 wheel is offered as part of a broader M205 lineup that spans additional sizes, finishes, and bolt patterns for other truck platforms.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e8.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x150\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.36\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e110 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBronze Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e26 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"MKW Offroad","offers":[{"title":"Default Title","offer_id":68713183576345,"sku":"M205-17855150-10Z","price":260.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/m205_bronzeblack_white__97832.jpg?v=1794773163"},{"product_id":"17x8-5-gray-black-wheel-m205-5x150-10-m205-17855150-10g","title":"M205 Gray Black | 17x8.5 | 5x150 -10mm Offset | M205-17855150-10G","description":"\u003cp\u003eBuilt for the 5x150 Platform\u003c\/p\u003e\u003cp\u003eToyota Tundra owners running the 2007-2021 generation have a strong fitment match in the MKW Offroad M205. The 5x150 bolt pattern is Toyota's full-size signature, shared across the Tundra, Sequoia, Land Cruiser 200, and Lexus LX 570, and the 110mm hub bore fits these platforms. At 17x8.5 inches with a -10mm offset, the mounting surface sits rearward of the wheel's centerline, pushing the wheel slightly outboard for a more aggressive stance than a neutral or positive offset delivers. Backspacing measures 4.36 inches. The M205 is also offered in additional sizes and finishes across the lineup for builds with different clearance or style targets.\u003c\/p\u003e\u003cp\u003eSimulated Beadlock Style, Exposed Lugs\u003c\/p\u003e\u003cp\u003eThe M205 leads with a split five-spoke design that carries a concave face profile, giving the wheel visual depth from any angle. The outer ring features a black simulated beadlock treatment that frames the face and adds a rugged, off-road-ready character to the overall look. Lug hardware sits exposed around the hub bore at the center of the face, visible against the matte gray finish and adding to the utilitarian, trail-ready aesthetic. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eMatte Gray Finish Built for Trucks\u003c\/p\u003e\u003cp\u003eThe finish is matte gray across the face and spokes, with the black simulated beadlock ring providing a two-tone contrast that suits lifted Tundra builds. Matte gray holds up well against brake dust and road grime without the upkeep demands of a polished or chrome surface, making it a practical choice for trucks that see regular use.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eMKW Offroad builds the M205 as a one-piece alloy wheel, a construction that supports the complex split-spoke geometry and concave face profile in a single continuous form. One-piece alloy construction delivers reliable structural integrity across the load cycles a full-size truck puts a wheel through, and the 26-lb weight per wheel is well within the range expected for this size and application. The one-piece form also keeps the design clean with no seams or hardware at the barrel junction.\u003c\/p\u003e\u003cp\u003eFitment for Toyota Full-Size Applications\u003c\/p\u003e\u003cp\u003eThe Toyota Tundra (2007-2021) is the primary verified fit for this wheel, with four additional verified platforms in the 5x150 universe including the Sequoia, Land Cruiser 200, and Lexus LX 570. The -10mm offset places the wheel outboard of a zero-offset position, which suits builds running a leveling kit or lift kit where additional clearance opens up room for the wheel's outboard positioning to work without interference.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e8.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x150\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.36\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e110 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eGray Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e26 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"MKW Offroad","offers":[{"title":"Default Title","offer_id":68713183904025,"sku":"M205-17855150-10G","price":260.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/m205_grayblack_white__48211.jpg?v=1794773164"},{"product_id":"20x9-bronze-black-wheel-m205-5x150-1-m205-2090515001z","title":"M205 Bronze Black | 20x9 | 5x150 +1mm Offset | M205-2090515001Z","description":"\u003cp\u003eBuilt for the 5x150 Platform\u003c\/p\u003e\u003cp\u003eToyota Tundra owners running the 2007-2021 generation have a wheel sized for their platform in the MKW Offroad M205. The 5x150 bolt pattern is Toyota's full-size signature, shared across the Tundra, Sequoia, Land Cruiser 200, and Lexus LX 570, among five verified fits total. At 20x9 with a +1mm offset, the mounting surface sits nearly centered on the wheel's centerline, placing the wheel in a balanced, upright position that works cleanly across stock, leveled, and lifted setups alike. The 110mm hub bore fits these Toyota full-size platforms, and the 2,600-lb load rating supports real-world truck use.\u003c\/p\u003e\u003cp\u003eSplit Five-Spoke Design with Simulated Beadlock\u003c\/p\u003e\u003cp\u003eThe M205 runs a split five-spoke face with a concave profile that gives the wheel visual depth from any angle. Each of the five split spokes draws the eye inward toward the hub, where the exposed lug hardware sits in a circle around the center bore, visible and intentional rather than hidden behind a cap. Ringing the outer edge is a black simulated beadlock ring that frames the face and adds a rugged, trail-ready character to the overall look. The matte bronze finish across the face and spokes contrasts sharply against the black beadlock ring, giving the M205 a two-tone presence that suits lifted Tundra builds well. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eThe M205 is cast in one-piece alloy, a construction that supports the complex geometry this design demands: the concave spoke profile, the deep barrel, and the simulated beadlock ring all come out of a single mold without seams or assembly points. Cast alloy has earned its place as the most widely used construction in aftermarket wheel manufacturing for good reason: it handles complex shapes reliably and delivers long-haul structural integrity at a price point that makes sense for a truck-use wheel. At 37 lbs, the M205 carries the weight you'd expect from a 20-inch truck wheel built to this spec.\u003c\/p\u003e\u003cp\u003eFitment Details\u003c\/p\u003e\u003cp\u003eThe +1mm offset places the mounting surface almost exactly at the wheel's centerline, a near-zero position that keeps the wheel tracking in a neutral, planted stance. Backspacing measures 5.04 inches. This setup works across the verified 5x150 fitment universe, with the Toyota Tundra (2007-2021) as the primary platform. The M205 is also offered in additional sizes and finishes across the lineup, so if this specific combination does not match your build, other options within the M205 family cover a broader range of configurations.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x150\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5.04\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e110 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBronze Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e37 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"MKW Offroad","offers":[{"title":"Default Title","offer_id":68713184297241,"sku":"M205-2090515001Z","price":365.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/m205_bronzeblack_white__58968.jpg?v=1794773165"},{"product_id":"20x9-bronze-black-wheel-m205-5x150-12-m205-2090515012z","title":"M205 Bronze Black | 20x9 | 5x150 +12mm Offset | M205-2090515012Z","description":"\u003cp\u003eSplit Five-Spoke Style with Simulated Beadlock Detail\u003c\/p\u003e\u003cp\u003eThe MKW Offroad M205 brings a distinct off-road character to the 5x150 platform in a 20x9 size with a +12mm offset. The split five-spoke face pairs with a black simulated beadlock ring around the outer edge, giving the wheel a rugged, trail-ready appearance without the weight or complexity of a functional beadlock. The matte bronze finish across the face and spokes contrasts sharply against the black ring, making the design stand out on any build running this platform.\u003c\/p\u003e\u003cp\u003eExposed Lugs and Concave Face\u003c\/p\u003e\u003cp\u003eThe M205 runs exposed lug hardware, visible in a circle around the hub bore where the wheel mounts to the vehicle. That hardware-forward look is a deliberate part of the design, reinforcing the off-road aesthetic rather than hiding the mounting points behind a cap. The concave face adds depth to the profile, pulling the spoke surfaces inward and giving the wheel a more dimensional appearance from the front. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOffset and Fitment on 5x150 Platforms\u003c\/p\u003e\u003cp\u003eAt +12mm, the mounting surface sits slightly forward of the wheel's centerline, positioning the wheel closer to the vehicle's face side. On a 9-inch-wide wheel, this offset keeps the stance composed rather than pushing the wheel aggressively outboard. The 110mm hub bore fits 5x150 platforms, including the Toyota Tundra (2007-2021) and four additional verified applications in the 5x150 universe, covering platforms like the Sequoia, Land Cruiser 200, and Lexus LX 570. Backspacing measures 5.47 inches. The 2,600-lb load rating is rated for full-size truck use.\u003c\/p\u003e\u003cp\u003eConstruction and Weight\u003c\/p\u003e\u003cp\u003eThe M205 is a one-piece alloy wheel. At 37 lbs, it comes in just under the typical weight for a 20-inch alloy truck wheel in this class. The one-piece construction means no welded joints or assembled sections, keeping the structure consistent across the barrel and face.\u003c\/p\u003e\u003cp\u003eBuild Range for the M205\u003c\/p\u003e\u003cp\u003eThe M205 is offered across additional sizes, widths, and finish options beyond this 20x9 matte bronze example, with both 6-lug and other bolt-pattern groups available for different truck platforms.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x150\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5.47\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e110 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBronze Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e37 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"MKW Offroad","offers":[{"title":"Default Title","offer_id":68713184624921,"sku":"M205-2090515012Z","price":365.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/m205_bronzeblack_white__48630.jpg?v=1794773166"},{"product_id":"17x8-5-black-wheel-m205-5x5-0-m205-1785512700a","title":"M205 Black | 17x8.5 | 5x5 0mm Offset | M205-1785512700A","description":"\u003cp\u003eSplit Five-Spoke Style with a Simulated Beadlock Ring\u003c\/p\u003e\u003cp\u003eThe MKW Offroad M205 brings a purpose-built off-road aesthetic to a 17x8.5 one-piece alloy wheel. The face runs five split spokes in a concave profile, and the outer ring carries a simulated beadlock treatment that gives the wheel the visual character of a locking ring without the added weight of a functional beadlock system. The finish is satin black throughout, a low-sheen surface that holds its look through trail dust, road grime, and seasonal weather without demanding constant upkeep. Lug hardware sits exposed around the hub bore, visible on the face and adding to the utilitarian, off-road-ready look the M205 is built around. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOffset and Dimensions\u003c\/p\u003e\u003cp\u003eAt 0mm offset, the mounting surface sits exactly at the wheel's centerline, positioning the barrel evenly split between inboard and outboard of the hub face. On a 17x8.5 wheel, that zero offset places the face outboard enough to give the truck a wider visual track without pushing into aggressive poke territory. Backspacing measures 4.75 inches. The 78.10mm hub bore fits 5x127 (5x5) platforms, and the 2,600-lb load rating covers full-size truck and SUV applications across the fitment range.\u003c\/p\u003e\u003cp\u003eBuilt as a One-Piece Alloy\u003c\/p\u003e\u003cp\u003eThe M205 is cast as a single piece of alloy, meaning the face, barrel, and hub are formed together rather than assembled from separate sections. There are no weld seams or joint lines between the face and barrel. At 26 lbs, this wheel comes in slightly under the typical weight for a 17-inch alloy truck wheel in this class, a result of the 8.5-inch width and the open split-spoke design geometry.\u003c\/p\u003e\u003cp\u003eFitment for 5x127 Platforms\u003c\/p\u003e\u003cp\u003eThe 5x127 (5x5) bolt pattern fits Jeep Wrangler JK and JL generations (2007-2026), Jeep Grand Cherokee (1999-2026), Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), GMC Yukon (1992-1999), and 10 additional verified platforms across 32 total fitments. Pre-2019 Ram 1500 trucks also run this bolt pattern. The M205 is also offered in additional sizes and finish options to suit different builds across the same platform family.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e8.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.75\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e78.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e26 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"MKW Offroad","offers":[{"title":"Default Title","offer_id":68713184985369,"sku":"M205-1785512700A","price":260.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/m205_black_white__46495.jpg?v=1794773167"},{"product_id":"17x8-5-gray-black-wheel-m205-5x5-0-m205-1785512700g","title":"M205 Gray Black | 17x8.5 | 5x5 0mm Offset | M205-1785512700G","description":"\u003cp\u003eSplit Five-Spoke Style with Simulated Beadlock Detail\u003c\/p\u003e\u003cp\u003eThe MKW Offroad M205 brings a rugged, trail-ready aesthetic to the 5x127 (5x5) bolt pattern in a 17x8.5 size. The face runs five split spokes in a concave profile, with a black simulated beadlock ring circling the outer edge to give the wheel a purpose-built off-road look without the complexity of a functional locking ring. Lug hardware sits exposed around the hub bore, visible on the face and adding to the utilitarian character of the design. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eMatte Gray Finish Built for the Outdoors\u003c\/p\u003e\u003cp\u003eThe finish is matte gray across the face and spokes, with the black simulated beadlock ring providing a two-tone contrast at the outer edge. Matte gray holds up well against road film and trail dust, and the low-sheen surface keeps the wheel looking intentional without demanding constant upkeep. The black ring at the perimeter sharpens the profile and reinforces the off-road visual character MKW Offroad is known for across their truck wheel lineup.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eThe M205 is a one-piece alloy wheel, cast as a single unit with no welded joints or assembled sections. The 2,600-lb load rating supports truck and SUV applications across the platforms this wheel fits. At 26 lbs, it comes in slightly under the typical weight for a 17-inch alloy truck wheel in this class. Backspacing measures 4.75 inches, and the 78.10mm hub bore fits 5x127 platforms.\u003c\/p\u003e\u003cp\u003eFitment for Jeep, Ram, and Classic GM Platforms\u003c\/p\u003e\u003cp\u003eThe 5x127 (5x5) bolt pattern covers a wide range of applications. The M205 fits the Jeep Wrangler (2007-2026) and Jeep Grand Cherokee (1999-2026), along with the Ram 1500 in its pre-2019 generation. Classic GM half-ton platforms are also in the mix, including the Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), with 10 additional verified fits rounding out the full 32-platform universe.\u003c\/p\u003e\u003cp\u003eThe zero offset places the mounting surface exactly at the wheel's centerline, splitting the 8.5-inch barrel evenly between inboard and outboard. On Wrangler and Grand Cherokee builds, this translates to a stance that sits noticeably outboard of stock without requiring a lift kit to clear. The M205 is also offered in additional sizes and finish options for builds with different fitment targets.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e8.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.75\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e78.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eGray Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e26 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"MKW Offroad","offers":[{"title":"Default Title","offer_id":68713185378585,"sku":"M205-1785512700G","price":260.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/m205_grayblack_white__62138.jpg?v=1794773168"},{"product_id":"18x9-black-wheel-m205-5x5-1-m205-1890512701a","title":"M205 Black | 18x9 | 5x5 +1mm Offset | M205-1890512701A","description":"\u003cp\u003eSplit Five-Spoke Style with a Simulated Beadlock Ring\u003c\/p\u003e\u003cp\u003eThe MKW Offroad M205 brings an off-road-ready aesthetic to an 18x9 one-piece alloy wheel. The satin black finish gives the face a low-sheen, matte-adjacent look that suits builds where gloss finishes would feel out of place. A simulated beadlock ring circles the outer edge, adding the visual character of a true beadlock without the weight or complexity of a functional locking ring. Five split spokes radiate from the hub area toward the outer barrel, and the concave face geometry adds depth to the profile. Lug hardware sits exposed around the hub bore, visible on the face as part of the design rather than hidden behind a cap. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOffset and Dimensions\u003c\/p\u003e\u003cp\u003eAt +1mm offset, the mounting surface sits almost exactly at the wheel's centerline, placing the barrel evenly split between inboard and outboard of the hub face. On a 9-inch-wide wheel, this keeps the stance close to centered rather than pushing the face outboard or pulling it inboard. Backspacing measures 5.04 inches. The 78.10mm hub bore fits the 5x127 (5x5) bolt pattern platforms this wheel is drilled for, and the 2,600-lb load rating covers full-size truck and SUV applications.\u003c\/p\u003e\u003cp\u003eFitment for Jeep and Truck Platforms\u003c\/p\u003e\u003cp\u003eThe 5x127 (5x5) bolt pattern covers a specific group of platforms, and the M205 is verified across 32 fitment applications. Primary fits include the Jeep Wrangler (2007-2026), Jeep Grand Cherokee (1999-2026), Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), with 10 additional verified platforms in the fitment universe. If you're building a Wrangler JK or JL, a Grand Cherokee, or a classic GM half-ton on this bolt pattern, the M205 drops right into the application.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eThe M205 is cast as a single piece of aluminum alloy, forming the face, barrel, and hub from one continuous structure with no welds or assembly joints. At 29 lbs, it comes in noticeably under the typical weight for an alloy 18-inch truck wheel in this class, which runs closer to 33 lbs. That difference across a set of four adds up in unsprung weight, which matters on platforms where the suspension is doing real work. The satin black finish is applied across the full wheel, including the simulated beadlock ring, keeping the look consistent from face to outer edge.\u003c\/p\u003e\u003cp\u003eAdditional Sizes and Finishes\u003c\/p\u003e\u003cp\u003eThe M205 is offered across additional sizes, widths, and finish options beyond this 18x9 satin black version, with bolt-pattern coverage extending to other lug counts as well.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5.04\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e78.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e29 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"MKW Offroad","offers":[{"title":"Default Title","offer_id":68713185739033,"sku":"M205-1890512701A","price":282.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/m205_black_white__89725.jpg?v=1794773169"},{"product_id":"20x9-black-wheel-m205-5x5-1-m205-2090512701a","title":"M205 Black | 20x9 | 5x5 +1mm Offset | M205-2090512701A","description":"\u003cp\u003eSplit Five-Spoke Style with a Simulated Beadlock Ring\u003c\/p\u003e\u003cp\u003eThe MKW Offroad M205 brings a rugged, off-road-ready aesthetic to a 20x9 one-piece alloy wheel. The face carries five split spokes in a concave profile, and the outer ring features a simulated beadlock treatment that gives the wheel the visual character of a locking ring without the added weight of a functional beadlock system. The satin black finish ties the whole face together with a low-sheen, matte-adjacent tone that holds up well against road grime and brake dust between washes. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eExposed Lugs Around the Hub\u003c\/p\u003e\u003cp\u003eThe lug hardware sits exposed and visible in a circle around the hub bore at the center of the wheel face. On the M205, that hardware is part of the visual statement: the exposed lugs complement the split-spoke layout and reinforce the off-road character of the design. The 78.10mm hub bore fits 5x127 (5x5) platforms, covering Jeep Wrangler, Jeep Grand Cherokee, Ram 1500, and similar applications across the 32 verified fits for this wheel.\u003c\/p\u003e\u003cp\u003eOffset and Dimensions\u003c\/p\u003e\u003cp\u003eAt +1mm offset, the mounting surface sits almost exactly at the wheel's centerline, placing the barrel evenly split between inboard and outboard of the hub face. On a 9-inch-wide wheel, this positions the wheel in a neutral stance relative to the fender rather than pushing it outboard. Backspacing measures 5.04 inches. The 2,600-lb load rating is sized for truck and SUV applications across the verified fitment range.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eThe M205 is cast as a single piece of alloy, forming the face, barrel, and mounting flange from one continuous structure. There are no welded joints or assembled sections. At 37 lbs, the wheel comes in slightly under the typical weight for a 20-inch alloy truck wheel in this class.\u003c\/p\u003e\u003cp\u003eFitment Across 5x127 Platforms\u003c\/p\u003e\u003cp\u003eVerified fits include the Jeep Wrangler (2007-2026), Jeep Grand Cherokee (1999-2026), Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), with 10 additional verified platforms in the fitment universe. The M205 is also offered in additional sizes and finish options for builds that need a different combination.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5.04\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e78.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e37 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"MKW Offroad","offers":[{"title":"Default Title","offer_id":68713186132249,"sku":"M205-2090512701A","price":365.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/m205_black_white__05651.jpg?v=1794773170"},{"product_id":"17x8-5-black-wheel-m205-6x120-6-m205-1785612006a","title":"M205 Black | 17x8.5 | 6x120 +6mm Offset | M205-1785612006A","description":"\u003cp\u003eBuilt for GM Mid-Size Truck and SUV Platforms\u003c\/p\u003e\u003cp\u003eThe Chevrolet Colorado and GMC Canyon (2015-2022) are the natural home for the MKW Offroad M205, and the Chevrolet Blazer (2019-2026) rounds out the primary fitment alongside 11 additional verified platforms in the 6x120 universe. At 17x8.5 inches with a +6mm offset, the mounting surface sits just forward of the wheel's centerline, keeping the wheel positioned close to the hub for a tucked, purposeful stance that works across stock, leveled, and lifted mid-size builds. The 87mm hub bore fits these GM platforms, and the 2,600-lb load rating handles the demands of daily-driven truck and SUV use.\u003c\/p\u003e\u003cp\u003eSplit Five-Spoke Design with Simulated Beadlock\u003c\/p\u003e\u003cp\u003eThe M205 runs a split five-spoke layout with a concave face, giving the wheel visual depth that suits the off-road character MKW Offroad brings to its truck-focused catalog. The standout detail is the simulated beadlock ring integrated into the outer edge, delivering the aggressive, trail-ready aesthetic of a beadlock wheel without the added weight or complexity of a functional locking ring. Lug hardware sits exposed on the face around the hub bore, adding to the rugged, hardware-forward look. A center cap (MKC-E059SB) is included with this wheel.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eThe M205 is cast in one-piece alloy, a construction that supports the split-spoke geometry and concave face profile in a single continuous shape. Cast alloy brings proven structural integrity and long-haul reliability at a price point that makes it the most widely used construction in the aftermarket truck wheel segment. At 26 lbs, this wheel comes in slightly under the typical weight for a 17-inch alloy truck wheel, a practical advantage for a mid-size platform where unsprung weight matters. Backspacing measures 4.99 inches.\u003c\/p\u003e\u003cp\u003eSatin Black Finish Built to Last\u003c\/p\u003e\u003cp\u003eThe finish is a satin black, a low-sheen tone that holds its look through road film, brake dust, and seasonal exposure without demanding constant upkeep. Satin black suits the M205's off-road-influenced design language and pairs naturally with the exposed lug hardware and simulated beadlock ring for a cohesive, intentional appearance across the full face of the wheel. The finish is consistent across the spoke faces, hub area, and beadlock ring detail.\u003c\/p\u003e\u003cp\u003eFitment Across the 6x120 Lineup\u003c\/p\u003e\u003cp\u003eThe Colorado and Canyon are the core fitment targets for this 6x120 wheel, with the Blazer adding a crossover-SUV application to the mix. Beyond those three primary platforms, the M205 fits 11 additional verified applications in the 6x120 bolt pattern. The M205 is also offered in additional sizes and finish options across the MKW Offroad lineup for builds that need a different combination.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e8.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x120\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.99\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e26 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"MKW Offroad","offers":[{"title":"Default Title","offer_id":68713186459929,"sku":"M205-1785612006A","price":260.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/m205_black_white__68129.jpg?v=1794773171"},{"product_id":"20x9-gray-black-wheel-m205-6x135-1-m205-2090613501g","title":"M205 Gray Black | 20x9 | 6x135 +1mm Offset | M205-2090613501G","description":"\u003cp\u003eSplit Five-Spoke Style with a Simulated Beadlock Ring\u003c\/p\u003e\u003cp\u003eThe MKW Offroad M205 brings a rugged, trail-ready aesthetic to the 6x135 Ford platform in a 20x9 footprint. The split five-spoke face pairs with a black simulated beadlock ring around the outer edge, giving the wheel the visual character of a beadlock build without the added weight or complexity of a functional locking ring. Five split spokes radiate from the hub area in a concave profile, and the lug hardware sits exposed around the hub bore, visible on the face as part of the design rather than hidden behind a cap. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eMatte Gray Finish with Black Accent Ring\u003c\/p\u003e\u003cp\u003eThe finish is matte gray across the face and barrel, with the simulated beadlock ring rendered in black to create a two-tone contrast. Matte gray holds up well in daily driving conditions and keeps road film from standing out the way a polished or chrome surface would. The black ring draws the eye to the outer edge and reinforces the off-road character of the design. At 37 lbs, this wheel sits close to the typical weight for a 20-inch alloy truck wheel in this class.\u003c\/p\u003e\u003cp\u003eOffset and Hub Bore for Ford 6x135 Platforms\u003c\/p\u003e\u003cp\u003eThe +1mm offset places the mounting surface almost exactly at the wheel's centerline, keeping the wheel positioned close to the factory track width rather than pushing it outboard or pulling it inboard. Backspacing measures 5.04 inches. The 87mm hub bore fits Ford 6x135 platforms. Verified fitment includes the Ford F-150 (2004-2026), Ford Expedition (2003-2027), Lincoln Navigator (2003-2027), Ford F-150 Lightning (2022-2026), and Ford Bronco (2022-2026), along with one additional verified platform. The 2,600-lb load rating is appropriate for full-size truck and SUV applications across this platform group.\u003c\/p\u003e\u003cp\u003eOne-Piece Alloy Construction\u003c\/p\u003e\u003cp\u003eThe M205 is cast as a single piece of alloy, with no welded joints or assembled sections. One-piece construction keeps the structural integrity consistent across the face, barrel, and hub area. The concave face profile adds visual depth to the split-spoke design and suits the proportions of a 20-inch truck wheel. MKW Offroad also offers the M205 in additional sizes and finish options for builds with different fitment targets.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x135\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5.04\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eGray Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAlloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e37 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"MKW Offroad","offers":[{"title":"Default Title","offer_id":68713186820377,"sku":"M205-2090613501G","price":365.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/m205_grayblack_white__06796.jpg?v=1794773172"}],"url":"https:\/\/offroadsource.com\/collections\/mkw-offroad.oembed","provider":"Offroad Source","version":"1.0","type":"link"}