{"title":"Steer Smarts","description":null,"products":[{"product_id":"jeep-outer-drag-link-service-end-high-steer-knuckle-jl-jt-taper-yeti-xd-for-18-24-wrangler-gladiator-steer-smarts","title":"Steer Smarts Jeep Outer Drag Link Service End High Steer Knuckle JL\/JT Taper Yeti XD For 18-24 Wrangler\/Gladiator | 77083002","description":"\u003cp\u003e2018-2024 Jeep Wrangler JL Gladiator JT Yeti XD Outer Drag Link Service End (High Steer Knuckle JL\/JT Taper) Yeti XD Drag Link Only Replacement Outer Drag Link End for High Steer Knuckle with JL\/JT Taper.\u003c\/p\u003e\u003cp\u003eAlso referred to as passenger side, over the knuckle, top mount. This product is intended for use with products like a Reid High-steer knuckle where the drag link mounts on top of the knuckle rather than in the stock location under the knuckle (bottom mount).\u003c\/p\u003e\u003cp\u003eThis product can be swapped out to replace a bottom mount or no-drill top mount passenger side end to allow you to have a solution for a high-steer knuckle.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThis Part Does Not Come With A Taper Insert\u003c\/li\u003e\n\u003cli\u003eThis Draglink Replacement End Has A Tapered Stud Intended For Use With Aftermarket Knuckles (Reid Racing) That Already Has A Machined Taper On Top Of Knuckle, Or, For A Factory Knuckle Previously Drilled Or Someone That Wants To Drill The Knuckle And Has A 7\/8's Insert\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Steer Smarts","offers":[{"title":"Default Title","offer_id":68711368261913,"sku":"77083002","price":210.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/77083002-GQSK.jpg?v=1794754172"},{"product_id":"2018-2026-jeep-wrangler-jl-romr-jl-rear-sway-bar-end-links-pair-fits-2-5-inch-3-5-inch-lift-kits-steer-smarts","title":"Steer Smarts 2018-2026 Jeep Wrangler JL RoMR JL Rear Sway Bar End Links (Pair) - (Fits 2.5 Inch- 3.5 Inch Lift Kits) | 74001004","description":"\u003cp\u003eRoMR 2.5 inch JL Rear Sway Bar End Links Pair is designed for use with our 2.5 inch lift options, but should work with most 2.5 inch lifts on the market. Rear end links are 10.50 inch center to center.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures and Benefits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLonger length to maintain correct sway bar angles with 2.5 inch lift\u003c\/li\u003e\n\u003cli\u003ePowdercoated for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eHardware included to make installation quick and easy\u003c\/li\u003e\n\u003cli\u003eEasy Bolt-in installation\u003c\/li\u003e\n\u003cli\u003eLimited Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003cb\u003eDetails:\u003c\/b\u003e\u003cul\u003e\n\u003cli\u003eFit Note: JL Models with 2.5 Inch - 3.5 Inch Lift Kits\u003c\/li\u003e\n\u003cli\u003eFinish: Powdercoat\u003c\/li\u003e\n\u003cli\u003eLocation: Rear\u003c\/li\u003e\n\u003cli\u003eLift Height: 2.5-3.5 Inch\u003c\/li\u003e\n\u003cli\u003eColor: Silver\u003c\/li\u003e\n\u003cli\u003eSeries: RoMR\u003c\/li\u003e\n\u003cli\u003eWarranty: Lifetime\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Steer Smarts","offers":[{"title":"Default Title","offer_id":68711485702425,"sku":"74001004","price":85.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/74001004-GQSK.png?v=1794754582"},{"product_id":"jeep-tie-rod-adjuster-sleeve-yeti-xd-for-18-24-wrangler-jl-gladiator-jt-non-rubicon-steer-smarts","title":"Steer Smarts Jeep Tie Rod Adjuster Sleeve Yeti XD For 18-24 Wrangler JL\/ Gladiator JT Non Rubicon | 07110001","description":"\u003cp\u003e2018-2024 Jeep Wrangler JL Gladiator JT Non Rubicon Yeti XD JL\/JT Tie Rod Adjuster Sleeve\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e(Non Rubicon) Yeti XD Tie Rod Only Replacement\u003c\/li\u003e\n\u003cli\u003eYETI XD Tie Rod Adjuster Tubes for JL\/JT\u003c\/li\u003e\n\u003cli\u003eStandard axle length.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Steer Smarts","offers":[{"title":"Default Title","offer_id":68711495074073,"sku":"07110001","price":194.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/07110001-GQSK.jpg?v=1794754656"},{"product_id":"18-24-jeep-wrangler-gladiator-jl-jt-yeti-xd-pro-series-aluminum-tie-rod-assembly-silver-adjuster-tube-rubicon-trim-steer-smarts","title":"Steer Smarts 18-24 Jeep Wrangler\/Gladiator JL\/JT Yeti XD Pro-Series Aluminum Tie Rod Assembly - Silver Adjuster Tube (Rubicon Trim) | 78096002","description":"\u003cp\u003eSteer Smarts presents our most extreme steering linkage The Yeti XD Pro-Series linkage for your Jeep JL\/JT Wrangler\/Gladiator. We applied our 85 years of steering lessons learned to develop the strongest most durable linkage ever built for the Wrangler.\u003c\/p\u003e\u003cp\u003eThe Yeti XD Tie Rod is a direct bolt-on for any JL Wrangler or JT Gladiator. The Yeti XD Tie Rod is a quick and easy install and there is no need to modify or alter Jeep.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eYeti XD Tie Rod Assembly:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEasy bolt-on installation.\u003c\/li\u003e\n\u003cli\u003eEngineered for proper clearance to other chassis components to eliminate interferences.\u003c\/li\u003e\n\u003cli\u003eMade In The USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBall Joints:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e30mm 2 1\/2 Ton ball joints designed specifically for the JL.\u003c\/li\u003e\n\u003cli\u003eCold-headed medium carbon alloy steel ball studs provide incredible impact toughness for extreme duty usage.\u003c\/li\u003e\n\u003cli\u003eInduction heat-treated ball studs provide ultimate fatigue strength and superior off-road durability.\u003c\/li\u003e\n\u003cli\u003eSteel on steel bearings provide exceptional ball joint wear resistance and robustness.\u003c\/li\u003e\n\u003cli\u003eHigh-quality seals ensure long ball joint life. Our superior seals have been rigorously tested to minimize leakage between grease service intervals, which greatly improves our ball joint reliability over our competition.\u003c\/li\u003e\n\u003cli\u003eFully greaseable.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTie Rod Ends:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePowder coat over E-coat for a long-lasting appearance under harsh conditions.\u003c\/li\u003e\n\u003cli\u003eExternal threads are e-coated for durability and long-term serviceability.\u003c\/li\u003e\n\u003cli\u003eForged from medium carbon high hardenability steel and heat-treated for even greater buckling, impact, and fatigue strength.\u003c\/li\u003e\n\u003cli\u003eLarge 1 1\/4 inch rolled threads at tie rod adjuster and draglink ends provide significantly increased strength over the original equipment threads.\u003c\/li\u003e\n\u003cli\u003eUnique Reverse Pin technology prevents our linkage from flopping or rocking. This technology is built into the socket, unlike the weak external supports on some competitor linkages.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAdjuster Sleeve:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEasy bolt-on installation.\u003c\/li\u003e\n\u003cli\u003eEngineered for proper clearance to other chassis components to eliminate interferences.\u003c\/li\u003e\n\u003cli\u003eTie Rod adjuster is manufactured from large 1-3\/4 inch diameter solid high strength T6 7075 Aluminum for maximum strength.\u003c\/li\u003e\n\u003cli\u003ePro-Series Adjuster clamps ensure proper clamp force using conventional tools without the possible risk of loosening like large jam nuts.\u003c\/li\u003e\n\u003cli\u003eDesigned with right-hand and left-hand threads for quick and easy adjustment when installed on the vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTorque Specs:\u003c\/strong\u003e\u003cbr\u003eClamps need to be torqued to 80-85 ft lbs, and should be oriented so that they do not interfere with anything else (generally facing forward or down). Clamp torque needs to be checked at 500 miles and then again at 2000 miles. After that, every oil change the torque specs should be checked as well as after any hard wheeling\/off-roading.\u003c\/p\u003e","brand":"Steer Smarts","offers":[{"title":"Default Title","offer_id":68711600292121,"sku":"78096002","price":599.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/78096002-GQSK.png?v=1794755461"},{"product_id":"jeep-drag-link-bottom-mount-w-griffin-bellow-yeti-xd-for-07-18-wrangler-jk-steer-smarts","title":"Steer Smarts Jeep Drag Link Bottom Mount w\/ Griffin Black Bellow Yeti XD For 07-18 Wrangler JK | 78070001","description":"\u003cp\u003e2007-2018 Jeep Wrangler JK 2007-2018 Yeti XD JK Drag Link Bottom Mount w\/ Griffin Black Bellow JK\u003c\/p\u003e\u003cp\u003eA minimum of 17 inch wheels is recommended. 16 inch wheels with a maximum 4.5 back spacing might fit but not guaranteed.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBlack\u003c\/li\u003e\n\u003cli\u003eGriffin XD Attenuator for the highest level of on-road and off-road stability and performance.\u003c\/li\u003e\n\u003cli\u003e30mm 2-1\/2 Ton ball joints designed specifically for the JL and JT.\u003c\/li\u003e\n\u003cli\u003eSteel on steel bearings provide exceptional ball joint wear resistance and robustness.\u003c\/li\u003e\n\u003cli\u003ePowder coat over E-coat for a long lasting appearance under harsh conditions.\u003c\/li\u003e\n\u003cli\u003eLarge 1 1\/4 inch rolled threads at tie rod adjuster and draglink ends provide significantly increased strength over the original equipment threads.\u003c\/li\u003e\n\u003cli\u003eAdjuster tube designed with right hand and left hand threads for quick and easy adjustment when installed on the vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Steer Smarts","offers":[{"title":"Jeep Drag Link Bottom Mount w\/ Griffin Black Bellow Yeti XD For 07-18 Wrangler JK Steer Smarts","offer_id":68712067531033,"sku":"78070001","price":749.0,"currency_code":"USD","in_stock":false},{"title":"Jeep Drag Link Bottom Mount w\/ Griffin Red Bellow Yeti XD For 07-18 Wrangler JK Steer Smarts","offer_id":68712067563801,"sku":"78070002","price":749.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/78070001-GQSK.jpg?v=1794757221"},{"product_id":"jeep-30mm-boot-seal-xd-tie-rod-xd-drag-links-yeti-xd-for-07-24-wrangler-jk-jl-gladiator-steer-smarts","title":"Jeep 30mm Boot Seal XD Tie Rod\/XD Drag Links Yeti XD For 07-24 Wrangler JK\/JL\/Gladiator Steer Smarts","description":"\u003cp\u003e2007-2024 Jeep Wrangler JK \/ JL Gladiator JT Yeti XD 30mm Boot Seal (XD Tie Rod \/ XD Drag Links) Yeti XD Drag Link and Tie Rod Only Replacement\u003c\/p\u003e\u003cul\u003e\u003cli\u003eYETI XD Boot Seal (30mm) Compatible with Tie-Rod and XD Drag Link.\u003c\/li\u003e\u003c\/ul\u003e","brand":"Steer Smarts","offers":[{"title":"Default Title","offer_id":68712635695385,"sku":"53036002","price":24.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/53036002-GQSK.png?v=1794763396"},{"product_id":"2018-2026-jeep-wrangler-jl-romr-2-5-inch-jl-bump-stop-complete-kit-steer-smarts","title":"Steer Smarts 2018-2026 Jeep Wrangler JL RoMR 2.5 Inch JL Bump Stop Complete Kit | 74002001","description":"\u003cp\u003eRoMR 2.5 inch JL Wrangler Bump Stop Extension Kit includes front and rear bump stop extensions that allow you to bump your RoMR 2.5 inch JL Wrangler Suspension Systems properly, but will likely work for other suspension kits.\u003c\/p\u003e\u003cp\u003eThe front bump stop is 2.125 inch tall, and the rear bump stops are 2 inch tall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures and Benefits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMade from high-quality UHMW\u003c\/li\u003e\n\u003cli\u003eMagnicoated Grade 8 Hardware Included\u003c\/li\u003e\n\u003cli\u003eEasy bolt-in installation\u003c\/li\u003e\n\u003cli\u003eLimited Lifetime Warranty\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cb\u003eDetails:\u003c\/b\u003e\u003cul\u003e\n\u003cli\u003eFit Note: JL Models with 2.5 Inch Lift Kit\u003c\/li\u003e\n\u003cli\u003eMaterial: Uhmw\u003c\/li\u003e\n\u003cli\u003eLift Height: 2.5 Inch\u003c\/li\u003e\n\u003cli\u003eColor: Black\u003c\/li\u003e\n\u003cli\u003eSeries: RoMR\u003c\/li\u003e\n\u003cli\u003eWarranty: Lifetime\u003c\/li\u003e\n\u003cli\u003eMount Style: Bolt In\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Steer Smarts","offers":[{"title":"Default Title","offer_id":68712642937113,"sku":"74002001","price":170.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/74002001-GQSK.png?v=1794763682"},{"product_id":"jeep-frame-side-reinforcement-bracket-yeti-xd-for-18-23-jeep-wrangler-jl-gladiator-jt-steer-smarts","title":"Steer Smarts Jeep Frame Side Reinforcement Bracket Yeti XD For 18-23 Jeep Wrangler JL\/Gladiator JT | 79025001","description":"\u003cp\u003e2018-2023 Jeep Wrangler JL Gladiator JT 2018-2023 Yeti XD JL\/JT Frame Side Reinforcement Bracket JL JT Reinforces the mounting location to keep the mount from breaking off or deflecting under stress. Engineered to bolt on to the stock track bar mount on the frame.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1\/4 inch Wall steel Powder coated for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eFits 2018-2023 model year JL Wranglers and 2020-2023 JT Gladiators (does not fit 2024+ model years)\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Steer Smarts","offers":[{"title":"Default Title","offer_id":68712654111001,"sku":"79025001","price":169.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/79025001-GQSK.jpg?v=1794764367"},{"product_id":"jeep-high-friction-washer-for-top-mount-drag-link-yeti-xd-for-18-24-wrangler-gladiator-steer-smarts","title":"Jeep High Friction Washer For Top Mount Drag Link Yeti XD For 18-24 Wrangler\/Gladiator Steer Smarts","description":"\u003cp\u003e2018-2024 Jeep Wrangler JL Gladiator JT Yeti XD JL\/JT High Friction Washer For Top Mount Drag Link Yeti XD Top Mount Drag Link\u003c\/p\u003e","brand":"Steer Smarts","offers":[{"title":"Default Title","offer_id":68712737505561,"sku":"42023002","price":20.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/42023002-GQSK.jpg?v=1794768458"},{"product_id":"18-24-jeep-wrangler-gladiator-jl-jt-yeti-xd-sealed-bearing-sector-shaft-brace-with-frame-side-track-bar-reinforcement-bracket-steel-steering-box-only-steer-smarts","title":"Steer Smarts Yeti XD Sector Shaft Brace with Frame Side Track Bar Reinforcement Bracket | 79041001","description":"\u003cp\u003eThe Yeti XD JL\/JT Sector Shaft Brace With Frame Side Track Bar Reinforcement Bracket was engineered to bolt onto the stock track bar mount on the frame. The purpose of this piece is two-fold. First, the sector shaft support is meant to help minimize the aluminum and steel steering gears from flexing\/deflecting\/moving when cycling your steering system side to side.\u003c\/p\u003e\u003cp\u003eThe second benefit of the product is to reinforce the frame side track bar mounting location to help minimize any deflection of this bracket and ensure that the mount doesn't break under extreme stress.\u003cbr\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number 79041001 is compatible with 2018-Present JL\/JT models with Steel Steering Boxes. For 2018-2024 JL\/JT models with the Aluminum Steering Boxes, use Part number 79041002.\u003c\/li\u003e\n\u003cli\u003eBig Bore gearboxes also require our Big Bore Supplemental Kit number 79079001\u003c\/li\u003e\n\u003cli\u003e2018-2020 Models With The Aluminum Steerin Box Require Additional Hardware\u003c\/li\u003e\n\u003cli\u003eFitment Issues may be present with certain aftermarket track bars - fitment based on angle\/how the hoop is bent as they can cause interference. We have seen fitment issues with the following track bars: Rough Country, CORE4X4...\u003c\/li\u003e\n\u003cli\u003eThis product is not compatible with drop pitman arm (ask us about replacing drop pitman with the proper solution).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEasy bolt-on installation with minimal modification needed\u003c\/li\u003e\n\u003cli\u003e1\/4 inch Wall steel laser-cut bracket\u003c\/li\u003e\n\u003cli\u003e1\/2 inch steel Sector Support with Sealed Roller Bearing\u003c\/li\u003e\n\u003cli\u003eAll upgraded fasteners included\u003c\/li\u003e\n\u003cli\u003eE-coated for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eFits 2024-Present model year JL Wranglers and JT Gladiators\u003c\/li\u003e\n\u003cli\u003eMade In The USA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Steer Smarts","offers":[{"title":"Default Title","offer_id":68712807923993,"sku":"79041001","price":335.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/79041001-GQSK.png?v=1794770480"},{"product_id":"2014-2024-ram-2500-yeti-xd-rear-adjustable-track-bar-steer-smarts","title":"Steer Smarts 2014-2024 RAM 2500 Yeti XD Rear Adjustable Track Bar-Red | 17742301","description":"\u003cp\u003eThe YETI XD Dodge Ram Adjustable Rear Track Bar is fully adjustable on the vehicle and is designed to be an adjustable heavy-duty upgrade over the stock track bar.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRAM Rear Adjustable Track Bar:\u003c\/li\u003e\n\u003cli\u003eEasy bolt-on installation.\u003c\/li\u003e\n\u003cli\u003eWorks on stock height (no lift) up to 4.5 Inch lift\u003c\/li\u003e\n\u003cli\u003eRecenters Axle Under Bed\u003c\/li\u003e\n\u003cli\u003eE-coated and powder-coated for a long-lasting appearance under harsh conditions.\u003c\/li\u003e\n\u003cli\u003eEngineered for proper clearance to other chassis components to eliminate interferences.\u003c\/li\u003e\n\u003cli\u003eForged from solid steel for greater buckling, impact, and fatigue strength.\u003c\/li\u003e\n\u003cli\u003eFully adjustable on the vehicle\u003c\/li\u003e\n\u003cli\u003eIncludes all necessary installation hardware.\u003c\/li\u003e\n\u003cli\u003eHeavy-duty bushing designed for Dodge RAM 2500\u003c\/li\u003e\n\u003cli\u003ePremium replacement for coil-sprung-rear RAM 2500\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty\u003c\/li\u003e\n\u003cli\u003eMade In The USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe YETI XD Dodge RAM Adjustable Track Bar fits left-hand drive 2014-Current 2500 Trucks with a rear coil spring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eWill Not Work With Rear Leaf Spring\u003c\/li\u003e\u003c\/ul\u003e","brand":"Steer Smarts","offers":[{"title":"2014-2024 RAM 2500 Yeti XD Rear Adjustable Track Bar-Red Steer Smarts","offer_id":68712813691161,"sku":"17742301","price":385.0,"currency_code":"USD","in_stock":false},{"title":"2014-2024 RAM 2500 Yeti XD Rear Adjustable Track Bar-Black Steer Smarts","offer_id":68712813723929,"sku":"17742302","price":385.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/17742301-GQSK.jpg?v=1794770745"},{"product_id":"jeep-flex-stabilizer-bracket-tie-rod-yeti-xd-for-07-24-wrangler-jk-jl-gladiator-steer-smarts","title":"Steer Smarts Jeep Flex Stabilizer Bracket Tie Rod Yeti XD For 07-24 Wrangler JK\/JL\/Gladiator | 41035001","description":"\u003cp\u003eYeti XD JK\/JL\/JT Flex Stabilizer Bracket (Tie Rod) 1-5\/8 inch Tie Rod Only The YETI XD Series steering damper bracket was engineered to be the most robust damper bracket available for the Jeep Wrangler. It was designed to fit our YETI XD Tie Rod and will also fit most aftermarket 1 5\/8 inch Tie Rods.\u003c\/p\u003e\u003cp\u003eThe Yeti XD damper bracket was designed to be the most versatile damper bracket available for the JK. This one bracket will fit a standard steering stabilizer or a hydro assist ram without any modification.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits any 1 5\/8 inch Tie Rod Fully CNC Machined.\u003c\/li\u003e\n\u003cli\u003eM12x1.75 hole on one side for mounding a standard steering stabilizer.\u003c\/li\u003e\n\u003cli\u003e5\/8 inch-11 hole on one side for mounding a hydro assist ram.\u003c\/li\u003e\n\u003cli\u003eE-coated for lasting appearance under harsh conditions.\u003c\/li\u003e\n\u003cli\u003eEngineered for proper clearance to other chassis components\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Steer Smarts","offers":[{"title":"Default Title","offer_id":68712820310297,"sku":"41035001","price":105.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/41035001-GQSK.png?v=1794770965"},{"product_id":"07-24-jeep-wrangler-gladiator-jk-jl-jt-front-track-bar-spanner-wrench-steer-smarts","title":"07-24 Jeep Wrangler\/Gladiator JK\/JL\/JT Front Track Bar Spanner Wrench Steer Smarts","description":"\u003cp\u003eThe Yeti XD Spanner Wrench Is Designed To Help You Turn The Track Bar Adjuster Sleeve On Your Vehicle, The Perfect Alternative To Using A Large Pair Of Channel Locks Which Will Undoubtedly Ruin The E-Coat. The Spanner Also Has A 21mm Hex, Which Can Be Used To Hold The 21mm Bolt Head In Place While Torquing Down The Clamps. Additionally, There Is A 1\/2 Inch Drive At The Base Of The Wrench If You Need Increased Leverage.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDesigned to easily adjust the Yeti XD Front JK\/JL\/JT Track Bars as well as the Yeti XD Rear JK Track Bar while on your vehicle.\u003c\/li\u003e\n\u003cli\u003eHas a 21mm Hex, Which Can Be Used To Hold The 21mm Bolt Head In Place While Torquing Down The Clamps\u003c\/li\u003e\n\u003cli\u003e1\/2 Inch Drive At The Base Of The Wrench If You Need Increased Leverage\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Steer Smarts","offers":[{"title":"Default Title","offer_id":68712863826201,"sku":"73021001","price":20.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/73021001-GQSK.png?v=1794771301"},{"product_id":"jeep-frame-side-reinforcement-bracket-yeti-xd-for-07-18-wrangler-jk-steer-smarts","title":"Steer Smarts Jeep Frame Side Reinforcement Bracket Yeti XD For 07-18 Wrangler JK | 79021001","description":"\u003cp\u003e2007-2018 Jeep Wrangler JK 2007-2018 Yeti XD Frame Side Reinforcement Bracket.  A minimum of 17 inch wheels is recommended.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe purpose of this piece is to reinforce this mounting location to keep the mount from breaking off or deflecting under stress 1\/4 inch Wall steel\u003c\/li\u003e\n\u003cli\u003ePowder-coated for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eAll fasteners included\u003c\/li\u003e\n\u003cli\u003eEasy bolt-on installation\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Steer Smarts","offers":[{"title":"Default Title","offer_id":68712966717721,"sku":"79021001","price":169.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/79021001-GQSK.jpg?v=1794771906"},{"product_id":"jeep-tie-rod-service-end-yeti-xd-for-18-24-wrangler-gladiator-passenger-side-steer-smarts","title":"Steer Smarts Jeep Tie Rod Service End Yeti XD For 18-24 Wrangler\/Gladiator Passenger Side | 70139003","description":"\u003cp\u003e2018-2024 Jeep Wrangler JL Gladiator JT Yeti XD Tie Rod Service End (Passenger Side) Yeti XD Tie Rod Only Replacement\u003c\/p\u003e\u003cul\u003e\u003cli\u003eYETI XD JL\/JT Tie Rod End - Passenger Side\u003c\/li\u003e\u003c\/ul\u003e","brand":"Steer Smarts","offers":[{"title":"Default Title","offer_id":68713113846041,"sku":"70139003","price":210.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/70139003-GQSK.jpg?v=1794772894"},{"product_id":"jeep-drag-link-pitman-arm-service-end-driver-side-yeti-xd-for-18-24-wrangler-gladiator-steer-smarts","title":"Steer Smarts Jeep Drag Link Pitman Arm Service End Driver Side Yeti XD For 18-24 Wrangler\/Gladiator | 77065001","description":"\u003cp\u003e2018-2024 Jeep Wrangler JL Gladiator JT Yeti XD. Drag Link Pitman Arm Service End (Driver Side)\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDrag Link Only Replacement Inner Drag Link End (Pitman Side).\u003c\/li\u003e\n\u003cli\u003eAlso referred to as the driver side.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Steer Smarts","offers":[{"title":"Default Title","offer_id":68713143501081,"sku":"77065001","price":165.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/77065001-GQSK.png?v=1794773115"},{"product_id":"jeep-front-track-bar-relocation-bracket-yeti-xd-for-07-18-wrangler-jk-steer-smarts","title":"Steer Smarts Jeep Front Track Bar Relocation Bracket Yeti XD For 07-18 Wrangler JK | 79017001","description":"\u003cp\u003e2007-2018 Jeep Wrangler JK Yeti XD JK Front Track Bar Relocation Bracket Top Mount or High Steer Drag Link Required The YETI XD Track Bar relocation bracket is designed to correct the geometry of the track bar on Jeep Wrangler JK's that are equipped with a top mounted draglink Ensures that the track bar and top mounted dragline are proper alignment and aid in the reduction of bump steer.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eE-coated for a long lasting appearance under harsh conditions.\u003c\/li\u003e\n\u003cli\u003eFabricated from 1\/4 inch Steel for greater buckling, impact, and fatigue strength.\u003c\/li\u003e\n\u003cli\u003eEngineered for proper clearance to other chassis components to eliminate interferences.\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Steer Smarts","offers":[{"title":"Default Title","offer_id":68713373565209,"sku":"79017001","price":165.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/79017001-GQSK.jpg?v=1794774145"},{"product_id":"jeep-drag-link-bottom-mount-drag-link-service-end-passenger-side-yeti-xd-for-18-24-wrangler-gladiator-steer-smarts","title":"Steer Smarts Jeep Drag Link Bottom Mount Drag Link Service End Passenger Side Yeti XD For 18-24 Wrangler\/Gladiator | 77062012","description":"\u003cp\u003e2018-2024 Jeep Wrangler JL Gladiator JT Yeti XD Drag Link Bottom Mount Drag Link Service End (Passenger Side) Yeti XD Drag Link Only\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eJL\/JT Yeti XD Drag Link Replacement End (Passenger Side Knuckle)\u003c\/li\u003e\n\u003cli\u003eYeti XD Bottom Mount Repalcement\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Steer Smarts","offers":[{"title":"Default Title","offer_id":68713439756569,"sku":"77062012","price":210.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/77062012-GQSK.png?v=1794774497"},{"product_id":"jeep-rear-adjustable-track-bar-yeti-xd-black-for-07-18-wrangler-jk-steer-smarts","title":"Steer Smarts Jeep Rear Adjustable Track Bar Yeti XD Black For 07-18 Wrangler JK | 75047002","description":"\u003cp\u003e2007-2018 Yeti XD JK Rear Adjustable Track Bar Black JK Track Bar cannot be guaranteed to fit with all aftermarket diff covers.\u003c\/p\u003e\u003cp\u003eWorks on stock height (no lift) up to a 6.5 inch lift E-coated and powder coated for a long lasting appearance under harsh conditions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2007-2018 Jeep Wrangler\u003c\/li\u003e\n\u003cli\u003eBlack\u003c\/li\u003e\n\u003cli\u003eRear\u003c\/li\u003e\n\u003cli\u003eEngineered for proper clearance to other chassis components to eliminate interferences.\u003c\/li\u003e\n\u003cli\u003eForged solid steel ends for greater buckling, impact, and fatigue strength.\u003c\/li\u003e\n\u003cli\u003eFully adjustable on the vehicle\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Steer Smarts","offers":[{"title":"Default Title","offer_id":68713452962073,"sku":"75047002","price":330.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/75047002-GQSK.jpg?v=1794774725"},{"product_id":"street-smarts-2007-2018-jeep-wrangler-jk-yeti-xd-pro-series-aluminum-tie-rod-adjuster-sleeve-w-clamps-black-black-07125002","title":"Street Smarts 2007-2018 Jeep Wrangler JK Yeti XD Pro-Series Aluminum Tie Rod Adjuster Sleeve w Clamps - Black Black 07125002","description":"\u003cp\u003eStreet Smarts 2007-2018 Jeep Wrangler JK Yeti XD Pro-Series Aluminum Tie Rod Adjuster Sleeve w Clamps - Black Black 07125002\u003c\/p\u003e","brand":"Steer Smarts","offers":[{"title":"Default Title","offer_id":68713851519257,"sku":"7125002","price":299.0,"currency_code":"USD","in_stock":false}]},{"product_id":"jeep-tie-rod-adjuster-sleeve-yeti-xd-for-18-24-wrangler-jl-gladiator-jt-rubicon-models-steer-smarts","title":"Steer Smarts Jeep Tie Rod Adjuster Sleeve Yeti XD For 18-24 Wrangler JL\/ Gladiator JT Rubicon Models | 07119001","description":"\u003cp\u003e2018-2024 Jeep Wrangler JL Gladiator JT Rubicon Yeti XD JL\/JT Tie Rod Adjuster Sleeve\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e(Rubicon) Yeti XD Tie Rod Only Replacement\u003c\/li\u003e\n\u003cli\u003eYETI XD Tie Rod Adjuster Tubes for JL\/JT\u003c\/li\u003e\n\u003cli\u003eStandard axle length.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Steer Smarts","offers":[{"title":"Default Title","offer_id":68714229235993,"sku":"07119001","price":194.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/07119001-GQSK.jpg?v=1794778464"},{"product_id":"jeep-drag-link-bottom-mount-w-griffin-xd-bellow-yeti-xd-for-18-24-wrangler-gladiator-steer-smarts","title":"Steer Smarts Jeep Drag Link Bottom Mount w\/ Griffin XD Black Bellow Yeti XD For 18-24 Wrangler\/Gladiator | 78089001","description":"\u003cp\u003eYeti XD JL\/JT Drag Link Bottom Mount w\/ Griffin XD Black Bellow JL, JT Mojave Gladiator is not currently compatible with the attenuator d\/t clearance issues with the factory skid plate.\u003c\/p\u003e\u003cp\u003eIt can be used if the skid plate is removed or if modified. Griffin XD Attenuator for the highest level of on-road and off-road stability and performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBlack\u003c\/li\u003e\n\u003cli\u003e30mm 2-1\/2 Ton ball joints designed specifically for the JL and JT.\u003c\/li\u003e\n\u003cli\u003eSteel on steel bearings provide exceptional ball joint wear resistance and robustness.\u003c\/li\u003e\n\u003cli\u003ePowder coat over E-coat for a long lasting appearance under harsh conditions.\u003c\/li\u003e\n\u003cli\u003eLarge 1 1\/4 inch rolled threads at tie rod adjuster and draglink ends provide significantly increased strength over the original equipment threads.\u003c\/li\u003e\n\u003cli\u003eAdjuster tube designed with right hand and left hand threads for quick and easy adjustment when installed on the vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Steer Smarts","offers":[{"title":"Jeep Drag Link Bottom Mount w\/ Griffin XD Black Bellow Yeti XD For 18-24 Wrangler\/Gladiator Steer Smarts","offer_id":68714432758041,"sku":"78089001","price":749.0,"currency_code":"USD","in_stock":false},{"title":"Jeep Drag Link Bottom Mount w\/ Griffin XD Red Bellow Yeti XD For 18-24 Wrangler\/Gladiator Steer Smarts","offer_id":68714432790809,"sku":"78089002","price":749.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/78089002-GQSK.jpg?v=1794780215"},{"product_id":"street-smarts-2007-2026-jeep-wrangler-gladiator-jk-jl-jt-yeti-xd-drag-link-adjuster-sleeve-black-07088001","title":"Street Smarts 2007-2026 Jeep Wrangler Gladiator JK JL JT Yeti XD Drag Link Adjuster Sleeve Black 07088001","description":"\u003cp\u003eStreet Smarts 2007-2026 Jeep Wrangler Gladiator JK JL JT Yeti XD Drag Link Adjuster Sleeve Black 07088001\u003c\/p\u003e","brand":"Steer Smarts","offers":[{"title":"Default Title","offer_id":68714565402905,"sku":"7088001","price":174.0,"currency_code":"USD","in_stock":false}]},{"product_id":"jeep-drag-link-top-mount-outer-end-assembly-yeti-hd-for-07-18-wrangler-jk-steer-smarts","title":"Steer Smarts Jeep Drag Link Top Mount Outer End Assembly Yeti HD For 07-18 Wrangler JK | 77058006","description":"\u003cp\u003eYeti HD JK Drag Link Top Mount Outer End Assembly JK The YETI HD 26 features our patent-pending No Drill Reverse Taper Mount, making it the easiest way to top mount your draglink.\u003c\/p\u003e\u003cp\u003eNo modifications of the knuckle is required and bolts directly to the factory tapered knuckle and factory draglink adjuster sleeve\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2007-18 Wrangler JK\u003c\/li\u003e\n\u003cli\u003ePatent Pending No Drill Reverse Taper Mount makes for a quick and easy installation without the need of drilling or altering your knuckle.\u003c\/li\u003e\n\u003cli\u003e26mm ball joint.\u003c\/li\u003e\n\u003cli\u003eSteel bearings are also used for exceptional ball joint wear resistance and robustness.\u003c\/li\u003e\n\u003cli\u003eBall joint is greaseable for greater reliability.\u003c\/li\u003e\n\u003cli\u003eMade in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Steer Smarts","offers":[{"title":"Default Title","offer_id":68714596892953,"sku":"77058006","price":210.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/77058006-GQSK.jpg?v=1794784932"},{"product_id":"2018-2026-jeep-wrangler-jl-romr-2-5-inch-jl-complete-spring-kit-3-6l-2-0l-gas-engine-steer-smarts","title":"2018-2026 Jeep Wrangler JL RoMR 2.5 Inch JL Complete Spring Kit (3.6L\/2.0L Gas Engine) Steer Smarts","description":"\u003cp\u003eRoMR 2.5 inch JL Wrangler Coil Spring Kit includes front and rear 2.5 inch Lift Springs for 2018-Present Jeep Wranglers with the 2.0L or 3.6L engines.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFront Springs are approximately 20 inch long.\u003c\/li\u003e\n\u003cli\u003eRear Springs are approximately 16.5 inch long.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFeatures and Benefits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTuned to custom RoMR spec for an improved ride quality and maximize performance both on and off road providing superior ride quality\u003c\/li\u003e\n\u003cli\u003eEngineered to provide a smooth and predictable on-road driving experience along with improved off-road performance\u003c\/li\u003e\n\u003cli\u003eProvides up to 2.5 inch of additional lift height designed to maintain proper geometry while allowing larger tire fitment and increased ground clearance (lift height based off base Wrangler model)\u003c\/li\u003e\n\u003cli\u003eHigh quality, corrosion-resistant gunmetal gray powder coat finish to maximize durability and resist corrosion\u003c\/li\u003e\n\u003cli\u003eLinear spring rates for consistent and predictable performance\u003c\/li\u003e\n\u003cli\u003eLimited Lifetime Warranty\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eSold as set of (2) front and (2) rear springs\u003c\/li\u003e\n\u003cli\u003eFits 2018-2026 Jeep Wrangler JL with 3.6L or 2.0L gas engines\u003c\/li\u003e\n\u003cli\u003eSame springs used in our RoMR Jeep Wrangler JL 2.5 inch Trail, Ascent, and Summit Suspension Lift Kits\u003c\/li\u003e\n\u003cli\u003eRequires pairing with appropriate length shocks\u003c\/li\u003e\n\u003cli\u003eAdjustable front and rear track bars are recommended to re-center axles on any lifted vehicle\u003cul\u003e\n\u003cli\u003eFront Adjustable Track Bars: Part Number 75040001, Part Number 75040002, Part Number 75049001, or Part Number 75049002\u003c\/li\u003e\n\u003cli\u003eRear Adjustable Track Bars: Part Number 75061001 or Part Number 75061002\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cb\u003eDetails:\u003c\/b\u003e\u003cul\u003e\n\u003cli\u003eFit Note: JL Models with 2.5 Inch Lift Kit\u003c\/li\u003e\n\u003cli\u003eLiter: 3.6 Liter|2.0 Liter\u003c\/li\u003e\n\u003cli\u003eFuel Type: Gas\u003c\/li\u003e\n\u003cli\u003eFinish: Powdercoat\u003c\/li\u003e\n\u003cli\u003eLift Height: 2.5 Inch\u003c\/li\u003e\n\u003cli\u003eColor: Gray\u003c\/li\u003e\n\u003cli\u003eSeries: RoMR\u003c\/li\u003e\n\u003cli\u003eWarranty: Lifetime\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Steer Smarts","offers":[{"title":"Default Title","offer_id":68714673766681,"sku":"74010001","price":420.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/74010001-GQSK.png?v=1794787400"},{"product_id":"2018-2026-jeep-wrangler-jl-romr-2-5-inch-jl-rear-springs-pair-3-6l-2-0l-gas-engine-steer-smarts","title":"2018-2026 Jeep Wrangler JL RoMR 2.5 Inch JL Rear Springs (Pair) (3.6L\/2.0L Gas Engine) Steer Smarts","description":"\u003cp\u003eRoMR 2.5 inch JL Wrangler Coil Spring rear 2.5 inch Lift Springs for 2018-Present Jeep Wranglers with the 2.0L or 3.6L engines.\u003c\/p\u003e\u003cul\u003e\u003cli\u003eRear Springs are approximately 16.5 inch long.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFeatures and Benefits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTuned to custom RoMR spec for an improved ride quality and maximize performance both on and off road providing superior ride quality\u003c\/li\u003e\n\u003cli\u003eEngineered to provide a smooth and predictable on-road driving experience along with improved off-road performance\u003c\/li\u003e\n\u003cli\u003eProvides up to 2.5 inch of additional lift height designed to maintain proper geometry while allowing larger tire fitment and increased ground clearance (lift height based off base Wrangler model)\u003c\/li\u003e\n\u003cli\u003eHigh quality, corrosion-resistant gunmetal gray powder coat finish to maximize durability and resist corrosion\u003c\/li\u003e\n\u003cli\u003eLinear spring rates for consistent and predictable performance\u003c\/li\u003e\n\u003cli\u003eLimited Lifetime Warranty\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eSold as pair of (2) rear springs\u003c\/li\u003e\n\u003cli\u003eFits 2018-2026 Jeep Wrangler JL with 3.6L or 2.0L gas engines\u003c\/li\u003e\n\u003cli\u003eSame springs used in our RoMR Jeep Wrangler JL 2.5 inch Trail, Ascent, and Summit Suspension Lift Kits\u003c\/li\u003e\n\u003cli\u003eRequires pairing with appropriate length shocks\u003c\/li\u003e\n\u003cli\u003eAdjustable front and rear track bars are recommended to re-center axles on any lifted vehicle\u003cul\u003e\n\u003cli\u003eFront Adjustable Track Bars: Part Number 75040001, Part Number 75040002, Part Number 75049001, or Part Number 75049002\u003c\/li\u003e\n\u003cli\u003eRear Adjustable Track Bars: Part Number 75061001 or Part Number 75061002\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cb\u003eDetails:\u003c\/b\u003e\u003cul\u003e\n\u003cli\u003eFit Note: JL Models with 2.5 Inch Lift Kit\u003c\/li\u003e\n\u003cli\u003eLiter: 3.6 Liter|2.0 Liter\u003c\/li\u003e\n\u003cli\u003eFuel Type: Gas\u003c\/li\u003e\n\u003cli\u003eFinish: Powdercoat\u003c\/li\u003e\n\u003cli\u003eLocation: Rear\u003c\/li\u003e\n\u003cli\u003eLift Height: 2.5 Inch\u003c\/li\u003e\n\u003cli\u003eColor: Gray\u003c\/li\u003e\n\u003cli\u003eSeries: RoMR\u003c\/li\u003e\n\u003cli\u003eWarranty: Lifetime\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Steer Smarts","offers":[{"title":"Default Title","offer_id":68714683597081,"sku":"74010010","price":210.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/74010010-GQSK.png?v=1794787720"},{"product_id":"jeep-track-bar-relocation-bracket-replacement-hardware-kit-yeti-xd-for-07-18-wrangler-jk-steer-smarts","title":"Jeep Track Bar Relocation Bracket Replacement Hardware Kit Yeti XD For 07-18 Wrangler JK Steer Smarts","description":"\u003cp\u003e2007-2018 Jeep Wrangler JK Yeti JK Track Bar Relocation Bracket Replacement Hardware Kit\u003c\/p\u003e\u003cp\u003eYeti Track Bar Relocation Bracket Required JK Track Bar Relocation Bracket Replacement Hardware Kit\u003c\/p\u003e","brand":"Steer Smarts","offers":[{"title":"Default Title","offer_id":68714684547353,"sku":"79016001","price":60.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/79016001-GQSK.jpg?v=1794787745"},{"product_id":"jeep-tie-rod-adjuster-tube-yeti-xd-for-17-18-wrangler-jk-steer-smarts","title":"Steer Smarts Jeep Tie Rod Adjuster Tube Yeti XD For 17-18 Wrangler JK | 07089001","description":"\u003cp\u003e2017-2018 Jeep Wrangler JK Yeti XD JK Tie Rod Adjuster Tube Yeti XD Tie Rod Only Replacement YETI\u003c\/p\u003e\u003cul\u003e\u003cli\u003eJK Tie Rod Adjuster Sleeve Assembly.\u003c\/li\u003e\u003c\/ul\u003e","brand":"Steer Smarts","offers":[{"title":"Default Title","offer_id":68714896392473,"sku":"07089001","price":179.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/07089001-GQSK.png?v=1794792739"},{"product_id":"2018-2024-jeep-wrangler-jl-yeti-xd-rear-adjustable-track-bar-black-steer-smarts","title":"Steer Smarts 2018-2024 Jeep Wrangler JL Yeti XD Rear Adjustable Track Bar-Black | 75061002","description":"\u003cp\u003e2018-2024 Jeep Wrangler JL Yeti XD Rear Adjustable Track Bar-Black.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWorks on stock height (no lift) up to a 6.5 inch lift\u003c\/li\u003e\n\u003cli\u003eE-coated and powder coated for a long lasting appearance under harsh conditions\u003c\/li\u003e\n\u003cli\u003eEngineered for proper clearance to other chassis components to eliminate interferences Forged solid steel ends for greater buckling, impact, and fatigue strength\u003c\/li\u003e\n\u003cli\u003eFully adjustable on the vehicle\u003c\/li\u003e\n\u003cli\u003eMade In The USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eTrack Bar cannot be guaranteed to fit with all aftermarket diff covers.\u003c\/li\u003e\u003c\/ul\u003e","brand":"Steer Smarts","offers":[{"title":"Default Title","offer_id":68716902285593,"sku":"75061002","price":330.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/75061002-GQSK.jpg?v=1794801102"},{"product_id":"jeep-front-adjustable-track-bar-yeti-xd-for-07-18-wrangler-jk-steer-smarts","title":"Steer Smarts Jeep Front Adjustable Track Bar Yeti XD Red For 07-18 Wrangler JK | 75033001","description":"\u003cp\u003e2007-2018 Yeti XD JK Front Adjustable Track Bar Red JK Track Bar cannot be guaranteed to fit with all aftermarket diff covers. Works on stock height (no lift) up to a 6.5 inch lift E-coated and powder coated for a long lasting appearance under harsh conditions.\u003c\/p\u003e\u003cp\u003eEngineered for proper clearance to other chassis components to eliminate interferences.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRed\u003c\/li\u003e\n\u003cli\u003eForged from 2 inch Steel for greater buckling, impact, and fatigue strength.\u003c\/li\u003e\n\u003cli\u003eFully adjustable on the vehicle\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Steer Smarts","offers":[{"title":"Jeep Front Adjustable Track Bar Yeti XD Red For 07-18 Wrangler JK Steer Smarts","offer_id":68717499646233,"sku":"75033001","price":320.0,"currency_code":"USD","in_stock":false},{"title":"Jeep Front Adjustable Track Bar Yeti XD Black For 07-18 Wrangler JK Steer Smarts","offer_id":68717499679001,"sku":"75033002","price":320.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/75033001-GQSK.jpg?v=1794801850"},{"product_id":"2007-2024-jeep-wrangler-gladiator-jk-jl-jt-yeti-xd-axle-side-single-post-stabilizer-relocation-bracket-bottom-mount-only-steer-smarts","title":"Steer Smarts 2007-2024 Jeep Wrangler\/Gladiator JK\/JL\/JT Yeti XD Axle-Side Single-Post Stabilizer Relocation Bracket (Bottom Mount Only) | 79019001","description":"\u003cp\u003eThe YETI XD steering stabilizer relocation bracket was engineered to relocate your stock stabilizer mounting location to move it up higher to protect it from potential damage from impact while also improving the force transfer angle.\u003c\/p\u003e\u003cp\u003eThis version utilizes a stud instead of tabs to push the stabilizer mount up a little higher for those who have tight clearances to the tie rod with less offset.\u003cbr\u003e\u003cstrong\u003eStabilizer Relocation Bracket Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEasy bolt-on installation with minimal modification needed (drill one hole)\u003c\/li\u003e\n\u003cli\u003e1\/4 inch Wall steel\u003c\/li\u003e\n\u003cli\u003eAll fasteners included\u003c\/li\u003e\n\u003cli\u003eE-coated\u003c\/li\u003e\n\u003cli\u003eMade In The USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThis product was designed to work on the JL and JT platforms using the stock tie rod.\u003c\/li\u003e\n\u003cli\u003eSome stabilizer styles may not work properly with this setup-be sure to confirm prior to purchase\u003c\/li\u003e\n\u003cli\u003eNot for use with hydro assist\u003c\/li\u003e\n\u003cli\u003eFor those using a Fox ATS, you must also purchase this bolt\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Steer Smarts","offers":[{"title":"Default Title","offer_id":68717962133785,"sku":"79019001","price":69.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/79019001-GQSK.jpg?v=1794802552"},{"product_id":"jeep-steering-attenuator-upgrade-for-xd-drag-links-griffin-xd-for-07-24-wrangler-jk-jl-gladiator-black-bellow-steer-smarts","title":"Jeep Steering Attenuator Upgrade for XD Drag Links Griffin XD For 07-24 Wrangler JK\/JL, Gladiator Black Bellow Steer Smarts","description":"\u003cp\u003e2007-2024 Jeep Wrangler JK \/ JL Gladiator JT Griffin XD Steering Attenuator Upgrade for XD Drag Links - Black Bellow Yeti XD Drag Link Only Reduces harsh and negative feedback to your steering wheel.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMade in the USA Designed for the proper clearance to other chassis components to eliminate interference.\u003c\/li\u003e\n\u003cli\u003eE-coated for a long-lasting appearance under harsh conditions.\u003c\/li\u003e\n\u003cli\u003eCompatible with JK, JL, JT YETI XD Draglink variants Wranglers equipped with 35 inch tires or larger.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Steer Smarts","offers":[{"title":"Default Title","offer_id":68718119485721,"sku":"07098001","price":399.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/07098001-GQSK.jpg?v=1794802713"},{"product_id":"steer-smarts-jl-jt-sector-shaft-stainless-bearing-plate-18-23-41074002","title":"STEER SMARTS JL\/JT SECTOR SHAFT STAINLESS BEARING PLATE 18-23 41074002","description":"\u003cp\u003eSTEER SMARTS JL\/JT SECTOR SHAFT STAINLESS BEARING PLATE 18-23 41074002\u003c\/p\u003e","brand":"Steer Smarts","offers":[{"title":"Default Title","offer_id":68720044278041,"sku":"41074002","price":88.0,"currency_code":"USD","in_stock":false}]},{"product_id":"18-24-jeep-wrangler-gladiator-jl-jt-yeti-xd-pro-series-aluminum-tie-rod-assembly-silver-adjuster-tube-non-rubicon-trim-steer-smarts","title":"Steer Smarts 18-24 Jeep Wrangler\/Gladiator JL\/JT Yeti XD Pro-Series Aluminum Tie Rod Assembly - Silver Adjuster Tube (Non Rubicon Trim) | 78095002","description":"\u003cp\u003eSteer Smarts presents our most extreme steering linkage The Yeti XD Pro-Series linkage for your Jeep JL\/JT Wrangler\/Gladiator. We applied our 85 years of steering lessons learned to develop the strongest most durable linkage ever built for the Wrangler.\u003c\/p\u003e\u003cp\u003eThe Yeti XD Tie Rod is a direct bolt-on for any JL Wrangler or JT Gladiator. The Yeti XD Tie Rod is a quick and easy install and there is no need to modify or alter Jeep.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eYeti XD Tie Rod Assembly:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEasy bolt-on installation.\u003c\/li\u003e\n\u003cli\u003eEngineered for proper clearance to other chassis components to eliminate interferences.\u003c\/li\u003e\n\u003cli\u003eMade In The USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBall Joints:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e30mm 2 1\/2 Ton ball joints designed specifically for the JL.\u003c\/li\u003e\n\u003cli\u003eCold-headed medium carbon alloy steel ball studs provide incredible impact toughness for extreme duty usage.\u003c\/li\u003e\n\u003cli\u003eInduction heat-treated ball studs provide ultimate fatigue strength and superior off-road durability.\u003c\/li\u003e\n\u003cli\u003eSteel on steel bearings provide exceptional ball joint wear resistance and robustness.\u003c\/li\u003e\n\u003cli\u003eHigh-quality seals ensure long ball joint life. Our superior seals have been rigorously tested to minimize leakage between grease service intervals, which greatly improves our ball joint reliability over our competition.\u003c\/li\u003e\n\u003cli\u003eFully greaseable.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTie Rod Ends:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePowder coat over E-coat for a long-lasting appearance under harsh conditions.\u003c\/li\u003e\n\u003cli\u003eExternal threads are e-coated for durability and long-term serviceability.\u003c\/li\u003e\n\u003cli\u003eForged from medium carbon high hardenability steel and heat-treated for even greater buckling, impact, and fatigue strength.\u003c\/li\u003e\n\u003cli\u003eLarge 1 1\/4 inch rolled threads at tie rod adjuster and draglink ends provide significantly increased strength over the original equipment threads.\u003c\/li\u003e\n\u003cli\u003eUnique Reverse Pin technology prevents our linkage from flopping or rocking. This technology is built into the socket, unlike the weak external supports on some competitor linkages.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAdjuster Sleeve:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEasy bolt-on installation.\u003c\/li\u003e\n\u003cli\u003eEngineered for proper clearance to other chassis components to eliminate interferences.\u003c\/li\u003e\n\u003cli\u003eTie Rod adjuster is manufactured from large 1-3\/4 inch diameter solid high strength T6 7075 Aluminum for maximum strength.\u003c\/li\u003e\n\u003cli\u003ePro-Series Adjuster clamps ensure proper clamp force using conventional tools without the possible risk of loosening like large jam nuts.\u003c\/li\u003e\n\u003cli\u003eDesigned with right-hand and left-hand threads for quick and easy adjustment when installed on the vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTorque Specs:\u003c\/strong\u003e\u003cbr\u003eClamps need to be torqued to 80-85 ft lbs, and should be oriented so that they do not interfere with anything else (generally facing forward or down). Clamp torque needs to be checked at 500 miles and then again at 2000 miles. After that, every oil change the torque specs should be checked as well as after any hard wheeling\/off-roading.\u003c\/p\u003e","brand":"Steer Smarts","offers":[{"title":"Default Title","offer_id":68721938497817,"sku":"78095002","price":599.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/78095002-GQSK.png?v=1794807303"},{"product_id":"jeep-steering-stabilizer-yeti-hdn-for-07-18-wrangler-jk-steer-smarts","title":"Steer Smarts Jeep Steering Stabilizer Yeti HDN For 07-18 Wrangler JK Black\/Red | 73011001","description":"\u003cp\u003eThe Steer Smarts HD-N Neutral stabilizer is a cost-effective steering stabilizer that has been optimized to work in conjunction with our Griffin XD Attenuator. The Neutral action on this stabilizer works as a true damper, absorbing the resonance frequencies and jolts rather than exerting a force against the tie rod.\u003c\/p\u003e\u003cp\u003eWhile optimized for our Griffin XD, this damper is an effective upgrade from the stock stabilizer for all setups.\u003c\/p\u003e\u003cp\u003eSticker to be applied by you to ensure proper orientation that works best for your specific application\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2007-2018 Jeep Wrangler JK\u003c\/li\u003e\n\u003cli\u003eBlack\/Red\u003c\/li\u003e\n\u003cli\u003eEasy bolt-on installation.\u003c\/li\u003e\n\u003cli\u003eImproved damping for smoothing driving experience\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Steer Smarts","offers":[{"title":"Jeep Steering Stabilizer Yeti HDN For 07-18 Wrangler JK Black\/Red Steer Smarts","offer_id":68722783256857,"sku":"73011001","price":89.0,"currency_code":"USD","in_stock":false},{"title":"Jeep Steering Stabilizer Yeti HDN For 07-18 Wrangler JK Steer Smarts","offer_id":68722783289625,"sku":"73012001","price":99.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/73011001-GQSK.jpg?v=1794813459"},{"product_id":"jeep-drag-link-top-mount-assembly-high-steer-or-drilled-out-oe-knuckle-yeti-xd-for-18-24-wrangler-gladiator-steer-smarts","title":"Steer Smarts Jeep Drag Link Top Mount Assembly High Steer or Drilled-Out OE Knuckle Yeti XD For 18-24 Wrangler\/Gladiator | 78102001","description":"\u003cp\u003eYeti XD JL\/JT Drag Link Top Mount Assembly (High Steer or Drilled-Out OE Knuckle) JL; JT; Drilled Out Knuckles Only. Forged in the USA 30mm 1-1\/2 Ton ball joints designed specifically for the JL and JT.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e Steel on steel bearings provide exceptional ball joint wear resistance and robustness. \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePowder coat over E-coat for a long lasting appearance under harsh conditions.\u003c\/li\u003e\n\u003cli\u003eLarge 1 1\/4 inch rolled threads at tie rod adjuster and draglink ends provide significantly increased strength over the original equipment threads.\u003c\/li\u003e\n\u003cli\u003eAdjuster tube designed with right hand and left hand threads for quick and easy adjustment when installed on the vehicles\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Steer Smarts","offers":[{"title":"Default Title","offer_id":68722901287193,"sku":"78102001","price":475.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/78102001-GQSK.jpg?v=1794815211"},{"product_id":"jeep-drag-link-no-drill-top-mount-assembly-yeti-xd-for-07-18-wrangler-jk-steer-smarts","title":"Steer Smarts Jeep Drag Link No Drill Top Mount Assembly Yeti XD For 07-18 Wrangler JK | 78063001","description":"\u003cp\u003e2007-2018 Jeep Wrangler JK 2007-2018 Yeti XD JK Drag Link No Drill Top Mount Assembly JK A Minimum Lift Height of of 3-3.5 inch (And Correct bump stop) is required for a top mount Drag link.\u003c\/p\u003e\u003cp\u003eTrack Bar Relocation Bracket Required for Top mount Drag Link to maintain proper paralled geometry track bar and drag link.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eA minimum of 17 inch wheels is recommended.\u003c\/li\u003e\n\u003cli\u003e16 inch wheels with a maximum 4.5 back spacing might fit but not guaranteed.\u003c\/li\u003e\n\u003cli\u003ePatent Pending No Drill Reverse Taper Mount makes for a quick and easy installation without the need of drilling or altering your knuckle.\u003c\/li\u003e\n\u003cli\u003e30mm 2-1\/2 Ton ball joints designed specifically for the JL and JT.\u003c\/li\u003e\n\u003cli\u003eSteel on steel bearings provide exceptional ball joint wear resistance and robustness.\u003c\/li\u003e\n\u003cli\u003ePowder coat over E-coat for a long lasting appearance under harsh conditions.\u003c\/li\u003e\n\u003cli\u003eLarge 1 1\/4 inch rolled threads at tie rod adjuster and draglink ends provide significantly increased strength over the original equipment threads.\u003c\/li\u003e\n\u003cli\u003eAdjuster tube designed with right hand and left hand threads for quick and easy adjustment when installed on the vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Steer Smarts","offers":[{"title":"Default Title","offer_id":68723036029209,"sku":"78063001","price":475.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/78063001-GQSK.jpg?v=1794817739"},{"product_id":"ram-upgraded-drag-link-adjuster-sleeve-yeti-xd-for-13-18-ram-2500-3500-stock-drag-link-steer-smarts","title":"Steer Smarts RAM Upgraded Drag Link Adjuster Sleeve Yeti XD For 13-18 RAM 2500\/3500 Stock Drag Link | 07141001","description":"\u003cp\u003e2013-2018 RAM 2500 \/ 3500 Yeti XD Upgraded Drag Link Adjuster Sleeve (Stock Drag Link) Stock Drag Link The YETI XD Adjuster Sleeve is a proper fix for the recalled 2013-2018 RAM drag link adjuster sleeve.\u003c\/p\u003e\u003cp\u003eThis Adjuster Sleeve utilizes clamps instead of jam nuts and eliminates the need to tack-weld the factory jam nuts to retain steering alignment.\u003c\/p\u003e\u003cp\u003eThe YETI XD adjuster sleeve is a direct bolt-on and Installs just minutes with no need to modify or alter your RAM. Engineered for proper clearance to other chassis components to eliminate interferences.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTie Rod adjuster is manufactured from large diameter 1\/4 inch thick wall high strength 4130 Chromoly steel tubing for maximum buckling strength.\u003c\/li\u003e\n\u003cli\u003eAdjuster clamps assure proper clamp force using conventional tools without the possible risk of loosening like large jam nuts.\u003c\/li\u003e\n\u003cli\u003eDesigned with right hand and left hand threads for quick and easy adjustment when installed on the vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Steer Smarts","offers":[{"title":"Default Title","offer_id":68723048120601,"sku":"07141001","price":145.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/07141001-GQSK.jpg?v=1794818041"},{"product_id":"2018-2026-jeep-wrangler-jl-gladiator-jt-romr-2-5-inch-jl-jt-front-bump-stop-kit-steer-smarts","title":"Steer Smarts 2018-2026 Jeep Wrangler JL\/Gladiator JT RoMR 2.5 Inch JL\/JT Front Bump Stop Kit | 74002007","description":"\u003cp\u003eRoMR 2.5 inch JL Wrangler\/Gladiator JT Front Bump Stop Kit includes front bump stop extensions that allow you to bump your RoMR 2.5 inch JL Wrangler\/Gladiator JT Suspension Systems properly, but will likely work for other suspension kits.\u003c\/p\u003e\u003cp\u003eThe front bump stop is 2.125 inch tall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures and Benefits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMade from high-quality UHMW\u003c\/li\u003e\n\u003cli\u003eMagnicoated Grade 8 Hardware Included\u003c\/li\u003e\n\u003cli\u003eEasy bolt-in installation\u003c\/li\u003e\n\u003cli\u003eLimited Lifetime Warranty\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cb\u003eDetails:\u003c\/b\u003e\u003cul\u003e\n\u003cli\u003eFit Note: JL\/JT Models with 2.5 Inch Lift Kit\u003c\/li\u003e\n\u003cli\u003eMaterial: Uhmw\u003c\/li\u003e\n\u003cli\u003eLocation: Front\u003c\/li\u003e\n\u003cli\u003eLift Height: 2.5 Inch\u003c\/li\u003e\n\u003cli\u003eColor: Black\u003c\/li\u003e\n\u003cli\u003eSeries: RoMR\u003c\/li\u003e\n\u003cli\u003eWarranty: Lifetime\u003c\/li\u003e\n\u003cli\u003eMount Style: Bolt In\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Steer Smarts","offers":[{"title":"Default Title","offer_id":68723132498201,"sku":"74002007","price":75.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/74002007-GQSK.png?v=1794819599"},{"product_id":"jeep-aluminum-damper-bracket-replacement-hardware-kit-07-24-wrangler-jk-jl-gladiator-steer-smarts","title":"Jeep Aluminum Damper Bracket Replacement Hardware Kit 07-24 Wrangler JK\/JL\/Gladiator Steer Smarts","description":"\u003cp\u003e2007-2024 Jeep Wrangler JK\/JL Gladiator Jt Aluminum Damper Bracket Replacement Hardware Kit Yeti Xd Stabilizer Clamp 41046001, 41056001, Or 41061001 Required Aluminum Damper Bracket Replacement Hardware Kit\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKit Includes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1X M12 - 1.75 X 55 Hex Bolt\u003c\/li\u003e\n\u003cli\u003e1X M12 Flat Washer\u003c\/li\u003e\n\u003cli\u003e4X 5\/16-18 X 1-1\/4 Allen Stud\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Steer Smarts","offers":[{"title":"Default Title","offer_id":68723182534937,"sku":"79031001","price":26.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/79031001-GQSK.jpg?v=1794820105"},{"product_id":"jeep-pro-series-aluminum-tie-rod-assembly-yeti-xd-for-07-18-wrangler-jk-steer-smarts","title":"Steer Smarts Jeep Pro-Series Aluminum Tie Rod Assembly Yeti XD For 07-18 Wrangler JK | 78094001","description":"\u003cp\u003e2007-2018 Jeep Wrangler JK Pro-Series Aluminum Tie Rod Assembly. Engineered for proper clearance to other chassis components to eliminate interferences.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e30mm 2-1\/2 Ton ball joints designed specifically for the JK. Steel on steel bearings provide exceptional ball joint wear resistance and robustness.\u003c\/li\u003e\n\u003cli\u003ePowder coat over E-coat for a long lasting appearance under harsh conditions.\u003c\/li\u003e\n\u003cli\u003eLarge 1 1\/4 inch rolled threads at tie rod adjuster and draglink ends provide significantly increased strength over the original equipment threads.\u003c\/li\u003e\n\u003cli\u003e1-3\/4 inch Solid aluminum adjuster tube designed with right hand and left hand threads for quick and easy adjustment when installed on the vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Steer Smarts","offers":[{"title":"Default Title","offer_id":68723489997081,"sku":"78094001","price":599.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/78094001-GQSK.jpg?v=1794822837"},{"product_id":"jeep-outer-drag-link-service-end-bottom-mount-yeti-xd-for-07-18-wrangler-jk-steer-smarts","title":"Steer Smarts Jeep Outer Drag Link Service End Bottom Mount Yeti XD For 07-18 Wrangler JK | 77056002","description":"\u003cp\u003eYeti XD JK Outer Drag Link Service End (Bottom Mount) Yeti XD Drag Link Only Replacement Yeti XD Outer Drag Link End (Bottom Mount).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2007-2018 Jeep Wrangler JK\u003c\/li\u003e\n\u003cli\u003eBlack\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Steer Smarts","offers":[{"title":"Default Title","offer_id":68723646857497,"sku":"77056002","price":210.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/77056002-GQSK.png?v=1794824380"},{"product_id":"jeep-rear-adjustable-track-bar-yeti-xd-for-20-24-gladiator-jt-steer-smarts","title":"Steer Smarts Jeep Rear Adjustable Track Bar Yeti XD For 20-24 Gladiator JT Red | 17742501","description":"\u003cp\u003e2020 - 2024 Jeep Gladiator JT Yeti XD Rear Adjustable Track Bar - Red Rear Only. Track Bar cannot be guaranteed to fit with all aftermarket diff covers\u003c\/p\u003e\u003cp\u003eThe YETI XD Rear Adjustable Track Bar is fully adjustable on the vehicle and is designed to be the strongest rear track bar available for the Jeep Gladiator JT. Works on stock height (no lift) up to 6.5 inch lift E-coated and powder coated for a long-lasting appearance under harsh conditions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRed\u003c\/li\u003e\n\u003cli\u003eEngineered for proper clearance to other chassis components to eliminate interferences.\u003c\/li\u003e\n\u003cli\u003eForged steel ends for greater buckling, impact, and fatigue strength.\u003c\/li\u003e\n\u003cli\u003eDesigned to correct Track Bar geometry and center the rear axle on the Jeep Gladiator JT\u003c\/li\u003e\n\u003cli\u003eFully adjustable on the vehicle\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Steer Smarts","offers":[{"title":"Jeep Rear Adjustable Track Bar Yeti XD For 20-24 Gladiator JT Red Steer Smarts","offer_id":68724294222105,"sku":"17742501","price":330.0,"currency_code":"USD","in_stock":false},{"title":"Jeep Rear Adjustable Track Bar Yeti XD For 20-24 Gladiator JT Black Steer Smarts","offer_id":68724294254873,"sku":"17742502","price":330.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/17742501-GQSK.jpg?v=1794826435"},{"product_id":"jeep-aluminum-tie-rod-adjuster-sleeve-yeti-xd-pro-series-for-18-24-jeep-wrangler-jl-gladiator-jt-non-rubicon-trim-steer-smarts","title":"Steer Smarts Jeep Aluminum Tie Rod Adjuster Sleeve Yeti XD Pro-Series For 18-24 Jeep Wrangler JL\/Gladiator JT Non Rubicon Trim | 07127002","description":"\u003cp\u003e2018-2024 Jeep Wrangler JL; Gladiator JT Non Rubicon Yeti XD JL\/JT Pro-Series Aluminum Tie Rod Adjuster Sleeve (Non Rubicon Trim) Yeti XD Tie Rod Only The YETI XD Tie Rod is a direct bolt-on Upgrade for any JK Wrangler with the YETI XD Tie Rod.\u003c\/p\u003e\u003cp\u003eThe YETI XD Installs just minutes and there is no need to modify or alter your Jeep.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNon Rubicon\u003c\/li\u003e\n\u003cli\u003eEngineered for proper clearance to other chassis components to eliminate interferences.\u003c\/li\u003e\n\u003cli\u003eTie Rod adjuster is manufactured from large 1-3\/4 inch diameter solid high strength 7075 Aluminum for maximum strength.\u003c\/li\u003e\n\u003cli\u003ePro-Series Adjuster clamps assure proper clamp force using conventional tools without the possible risk of loosening like large jam nuts.\u003c\/li\u003e\n\u003cli\u003eDesigned with right-hand and left-hand threads for quick and easy adjustment when installed on the vehicle.\u003c\/li\u003e\n\u003cli\u003eDirect replacement for Yeti XD Tie Rod with Chromoly adjuster tube\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Steer Smarts","offers":[{"title":"Default Title","offer_id":68724311130393,"sku":"07127002","price":299.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/07127002-GQSK.jpg?v=1794826872"},{"product_id":"jeep-aluminum-tie-rod-adjuster-sleeve-yeti-xd-pro-series-for-18-24-jeep-wrangler-jl-gladiator-jt-rubicon-trim-steer-smarts","title":"Steer Smarts Jeep Aluminum Tie Rod Adjuster Sleeve Yeti XD Pro-Series For 18-24 Jeep Wrangler JL\/Gladiator JT Rubicon Trim | 07129002","description":"\u003cp\u003e2018-2024 Jeep Wrangler JL; Gladiator JT Non Rubicon Yeti XD JL\/JT Pro-Series Aluminum Tie Rod Adjuster Sleeve Rubicon Trim Yeti XD Tie Rod Only The YETI XD Tie Rod is a direct bolt-on Upgrade for any JK Wrangler with the YETI XD Tie Rod.\u003c\/p\u003e\u003cp\u003eThe YETI XD Installs just minutes and there is no need to modify or alter your Jeep.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRubicon\u003c\/li\u003e\n\u003cli\u003eEngineered for proper clearance to other chassis components to eliminate interferences.\u003c\/li\u003e\n\u003cli\u003eTie Rod adjuster is manufactured from large 1-3\/4 inch diameter solid high strength 7075 Aluminum for maximum strength.\u003c\/li\u003e\n\u003cli\u003ePro-Series Adjuster clamps assure proper clamp force using conventional tools without the possible risk of loosening like large jam nuts.\u003c\/li\u003e\n\u003cli\u003eDesigned with right-hand and left-hand threads for quick and easy adjustment when installed on the vehicle.\u003c\/li\u003e\n\u003cli\u003eDirect replacement for Yeti XD Tie Rod with Chromoly adjuster tube\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Steer Smarts","offers":[{"title":"Default Title","offer_id":68724422476057,"sku":"07129002","price":299.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/07129002-GQSK.jpg?v=1794828677"},{"product_id":"jeep-front-sway-bar-end-link-kit-yeti-xd-fits-2-5-3-5-inch-lift-for-07-24-wrangler-jk-jl-gladiator-steer-smarts","title":"Steer Smarts Jeep Front Sway Bar End Link Kit Yeti XD Black Fits 2.5- 3.5 Inch Lift For 07-24 Wrangler JK\/JL\/Gladiator | 74009002","description":"\u003cp\u003e2007-2024 Jeep Wrangler JK \/ JL Gladiator JT Yeti XD JK\/JL\/JT Front Sway Bar End Link Kit (Black) - (Fits 2.5 inch- 3.5 inch Lift) 2 inch - 3.5 inch Lift Only The YETI XD JK\/JL Sway Bar End Link Kit was designed to work with Jeep Wrangler's currently running a 2 inch- 3.5 inch lift.\u003c\/p\u003e\u003cp\u003eConstructed from high-quality aluminum, these end links utilize a unique truss-style design for added strength and rigidity.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBlack\u003c\/li\u003e\n\u003cli\u003eYou will notice a decrease in body roll and an overall improvement in handling and drivability when adding this kit to your Jeep.\u003c\/li\u003e\n\u003cli\u003eAdditionally, the end links have been hard-coat anodized for maximum corrosion resistance.\u003c\/li\u003e\n\u003cli\u003eHigh-Quality Aluminum Construction\u003c\/li\u003e\n\u003cli\u003eUnique truss-style design for added strength and rigidity Fits JK and JL Jeep Wranglers equipped with a 2 inch- 3.5 inch lift (links are 9 inch center to center)\u003c\/li\u003e\n\u003cli\u003eHard-coat anodized for maximum corrosion resistance\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Steer Smarts","offers":[{"title":"Default Title","offer_id":68724603257113,"sku":"74009002","price":189.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/74009002-GQSK.jpg?v=1794830922"},{"product_id":"jeep-replacement-high-friction-taper-sleeve-xd-tie-rod-and-drag-links-yeti-xd-for-18-24-wrangler-gladiator-steer-smarts","title":"Steer Smarts Jeep Replacement High Friction Taper Sleeve XD Tie Rod and Drag Links Yeti XD For 18-24 Wrangler\/Gladiator | 47055002","description":"\u003cp\u003e2018-2024 Jeep Wrangler JL Gladiator JT Yeti XD JL\/JT Replacement High Friction Taper Sleeve - XD Tie Rod and Drag Links Yeti XD Drag Link and Tie Rod Only\u003c\/p\u003e","brand":"Steer Smarts","offers":[{"title":"Default Title","offer_id":68724677902617,"sku":"47055002","price":30.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/47055002-GQSK.jpg?v=1794831889"},{"product_id":"jeep-single-post-stabilzer-bracket-1-5-8-aluminum-yeti-xd-for-07-24-wrangler-jk-jl-gladiator-steer-smarts","title":"Steer Smarts Jeep Single Post Stabilzer Bracket 1 5\/8 Aluminum Yeti XD For 07-24 Wrangler JK\/JL\/Gladiator | 41046001","description":"\u003cp\u003e2007-2024 Jeep Wrangler JK \/ JL Gladiator JT Yeti XD JK\/JL\/JT Single Post Stabilzer Bracket 1 3\/4 (Alum) 1-5\/8 inch Tie Rod Only The YETI HD Aluminum steering stabilizer \/ damper brackets are engineered to fit a wide variety of applications including our YETI XD Tie Rods, YETI XD Pro-Series Aluminum Tie Rods, Stock JL Tie Rods and will also fit most aftermarket Tie Rods.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe Yeti XD damper bracket was designed to fit a standard steering stabilizer without any modification.\u003c\/li\u003e\n\u003cli\u003eSized for 1 5\/8 Fully CNC machined.\u003c\/li\u003e\n\u003cli\u003eM12x1.75 hole for mounding a standard steering stabilizer.\u003c\/li\u003e\n\u003cli\u003eHard coated for lasting appearance under harsh conditions.\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Steer Smarts","offers":[{"title":"Default Title","offer_id":68724893352217,"sku":"41046001","price":90.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/41046001-GQSK.jpg?v=1794832983"},{"product_id":"2012-2024-ram-2500-3500-yeti-xd-front-adjustable-track-bar-steer-smarts","title":"Steer Smarts 2012-2024 RAM 2500\/3500 Yeti XD Front Adjustable Track Bar-Red | 75062001","description":"\u003cp\u003e2012-2024 RAM 2500\/3500 Yeti XD Front Adjustable Track Bar-Red.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWorks on stock height (no lift) up to a 6.5 inch lift\u003c\/li\u003e\n\u003cli\u003eE-coated and powder coated for a long lasting appearance under harsh conditions\u003c\/li\u003e\n\u003cli\u003eEngineered for proper clearance to other chassis components to eliminate interferences Forged solid steel ends for greater buckling, impact, and fatigue strength\u003c\/li\u003e\n\u003cli\u003eFully adjustable on the vehicle\u003c\/li\u003e\n\u003cli\u003eMade In The USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eTrack Bar cannot be guaranteed to fit with all aftermarket diff covers.\u003c\/li\u003e\u003c\/ul\u003e","brand":"Steer Smarts","offers":[{"title":"2012-2024 RAM 2500\/3500 Yeti XD Front Adjustable Track Bar-Red Steer Smarts","offer_id":68724945387801,"sku":"75062001","price":440.0,"currency_code":"USD","in_stock":false},{"title":"2012-2024 RAM 2500\/3500 Yeti XD Front Adjustable Track Bar-Black Steer Smarts","offer_id":68724945420569,"sku":"75062003","price":440.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/75062001-GQSK.png?v=1794833900"},{"product_id":"jeep-pro-series-front-adjustable-track-bar-yeti-xd-for-07-18-wrangler-jk-steer-smarts","title":"Steer Smarts Jeep Pro-Series Front Adjustable Track Bar Yeti XD Red For 07-18 Wrangler JK | 75039001","description":"\u003cp\u003e2007-2018 Yeti XD JK Pro-Series Front Adjustable Track Bar Red JK Track Bar cannot be guaranteed to fit with all aftermarket diff covers.\u003c\/p\u003e\u003cp\u003eThe Pro-Series comes with our polyurethane bushing rather than rubber, which is a harder durometer, limiting the amount of deflection allowed by the bushing.\u003c\/p\u003e\u003cp\u003eWorks on stock height (no lift) up to a 6.5 inch lift E-coated and powder coated for a long lasting appearance under harsh conditions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eForged from 2 inch Steel for greater buckling, impact, and fatigue strength.\u003c\/li\u003e\n\u003cli\u003eDesigned to correct Track Bar geometry on the 07-18 Jeep Wrangler JK\u003c\/li\u003e\n\u003cli\u003ePolyurethane Pro-Series Bushing Fully adjustable on the vehicle\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Steer Smarts","offers":[{"title":"Jeep Pro-Series Front Adjustable Track Bar Yeti XD Red For 07-18 Wrangler JK Steer Smarts","offer_id":68724959379737,"sku":"75039001","price":345.0,"currency_code":"USD","in_stock":false},{"title":"Jeep Pro-Series Front Adjustable Track Bar Yeti XD Black For 07-18 Wrangler JK Steer Smarts","offer_id":68724959412505,"sku":"75039002","price":345.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/75039001-GQSK.jpg?v=1794834301"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/collections\/api8qn7ma0lj3302z1q3jo__30180.jpg?v=1794865686","url":"https:\/\/offroadsource.com\/collections\/steer-smarts.oembed","provider":"Offroad Source","version":"1.0","type":"link"}