{"title":"Weld Off-Road","description":null,"products":[{"product_id":"17x10-red-wheel-cinch-beadlock-5x5-24-w90570057450","title":"Cinch Beadlock Red | 17x10 | 5x5 -24mm Offset | W90570057450","description":"\u003cp\u003eBuilt for Jeep and Truck Platforms on 5x127\u003c\/p\u003e\u003cp\u003eJeep Wrangler owners (2007-2026) get a wheel sized and offset for serious off-road builds with the Weld Off-Road Cinch Beadlock. The 5x127 (5x5) bolt pattern also fits the Jeep Grand Cherokee (1999-2026), Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), with 10 additional verified platforms rounding out the fitment universe. The 87.1mm hub bore fits these 5x127 platforms. At 17x10 with a -24mm offset, the mounting surface sits rearward of centerline, pushing the wheel outward for an aggressive stance that suits lifted builds running larger tires.\u003c\/p\u003e\u003cp\u003eA Real Beadlock, Not a Simulation\u003c\/p\u003e\u003cp\u003eThe Cinch Beadlock is a functional beadlock wheel. The outer ring mechanically clamps the tire bead to the wheel, keeping the tire seated under the low-pressure airing-down conditions that serious off-road terrain demands. This is not a cosmetic ring or a simulated beadlock look: it is the real hardware, carrying Weld's racing-grade engineering into the off-road truck space. The exposed lug hardware sits in a circle around the hub bore at the center of the wheel face, visible and purposeful against the Candy Red finish.\u003c\/p\u003e\u003cp\u003eRotary Forged Construction\u003c\/p\u003e\u003cp\u003eWeld Off-Road builds the Cinch Beadlock using a rotary forged process, where the cast barrel is heated and spun under pressure, compressing and densifying the aluminum grain through the barrel wall. The result is a stronger, lighter barrel than standard casting alone. At 26 lbs, this 17-inch, 10-inch-wide wheel comes in below the typical weight for rotary forged wheels in this class, a meaningful advantage when unsprung weight matters on the trail. One-piece construction keeps the wheel structurally unified from hub to barrel.\u003c\/p\u003e\u003cp\u003eSplit Seven-Spoke Design in Candy Red\u003c\/p\u003e\u003cp\u003eThe Cinch Beadlock runs a split seven-spoke face in a bold Candy Red finish. Each of the seven split spokes carries visual depth without overcomplicating the face geometry, and the outer beadlock ring frames the design with a functional, aggressive profile. Backspacing measures 4.56 inches. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eFitment Across the Lineup\u003c\/p\u003e\u003cp\u003eThe Cinch Beadlock is also offered in additional sizes, widths, finishes, and bolt patterns to cover a range of builds beyond this specific combination.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-24 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.56\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eRed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eRotary Forged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e26 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Weld Off-Road","offers":[{"title":"Default Title","offer_id":68713216442649,"sku":"W90570057450","price":710.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/cinchbeadlock_red_white__32293.jpg?v=1794773528"},{"product_id":"18x9-bronze-black-wheel-ledge-6-w106-6x135-0-w10689089501","title":"Ledge 6 W106 Bronze Black | 18x9 | 6x135 0mm Offset | W10689089501","description":"\u003cp\u003eBuilt for the 6x135 Ford Platform\u003c\/p\u003e\u003cp\u003eFord F-150 owners (2004-2026) get a wheel sized and drilled for their platform right out of the box. The Weld Off-Road Ledge 6 W106 covers the full 6x135 Ford family: F-150, Expedition (2003-2027), Lincoln Navigator (2003-2027), F-150 Lightning (2022-2026), and Ford Bronco (2022-2026), with one additional verified platform in the lineup. The 87.10mm hub bore fits these Ford applications, and the 2,500-lb load rating supports the demands of a full-size truck build. A center cap is included.\u003c\/p\u003e\u003cp\u003eSplit Six-Spoke Design with Simulated Beadlock\u003c\/p\u003e\u003cp\u003eThe Ledge 6 runs a split six-spoke face with a concave profile that gives the wheel visual depth from any angle. Exposed lug hardware sits in a circle around the hub bore at the center of the face, keeping the mounting hardware visible as part of the design rather than hidden behind a cap. The simulated beadlock ring wraps the outer edge in black, framing the satin bronze face with a contrast detail that suits lifted Ford truck builds. The 18-inch diameter and 9-inch width land at a 0mm offset, placing the mounting surface exactly at the wheel's centerline for a balanced, flush stance.\u003c\/p\u003e\u003cp\u003eRotary Forged Construction\u003c\/p\u003e\u003cp\u003eWeld Off-Road brings its racing-derived manufacturing discipline to the Ledge 6 through rotary forging. The barrel is heated and spun under pressure, compressing and densifying the aluminum grain through the barrel wall for a stronger, stiffer structure than standard casting alone. At 29 lbs, the wheel carries that structural integrity without unnecessary mass, a result of the rotary forging process refining the barrel rather than relying on added material thickness. One-piece construction keeps the design clean and the build straightforward.\u003c\/p\u003e\u003cp\u003eFinish and Stance Details\u003c\/p\u003e\u003cp\u003eThe satin bronze finish covers the face and spokes, with the black simulated beadlock ring providing a sharp contrast at the outer edge. Satin bronze holds its character across seasons and road conditions without the upkeep demands of a polished or chrome surface. At 0mm offset with 5 inches of backspacing, the mounting surface sits centered in the barrel, giving the wheel a neutral outboard position that works across stock, leveled, and lifted setups on 6x135 Ford platforms. The Ledge 6 is also offered in additional sizes, widths, and finish options to suit a range of build directions.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x135\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBronze Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eRotary Forged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2500 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e29 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Weld Off-Road","offers":[{"title":"Default Title","offer_id":68713216508185,"sku":"W10689089501","price":360.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/ledge6_bronzeblack_white__56742.jpg?v=1794773528"},{"product_id":"17x9-bronze-black-wheel-swift-6x135-6x5-5-12-w18079098450","title":"Swift Bronze Black | 17x9 | 6x135\/6x5.5 -12mm Offset | W18079098450","description":"\u003cp\u003eFord and GM Truck Fitment in One Wheel\u003c\/p\u003e\u003cp\u003eThe Weld Off-Road Swift is dual-drilled for both 6x135 and 6x139.7 (6x5.5) bolt patterns, covering Ford F-150, Expedition, and Bronco platforms alongside Chevy Silverado 1500, GMC Sierra 1500, Tahoe, Yukon, and similar GM full-size applications. The 106.10mm hub bore fits these platforms, and the 2,500-lb load rating supports real-world truck use. One additional verified platform rounds out the fitment list beyond the five named here.\u003c\/p\u003e\u003cp\u003eSplit Eight-Spoke Design with Simulated Beadlock\u003c\/p\u003e\u003cp\u003eThe Swift's face runs eight split spokes in a concave profile, giving the wheel visual depth and a layered look that suits aggressive truck builds. The outer ring carries a satin black simulated beadlock treatment, framing the face with the rugged aesthetic Weld Off-Road is known for without the complexity of a functional beadlock setup. A center cap is included with this wheel, covering the lug hardware for a clean hub presentation. The satin bronze finish on the spoke faces pairs with the satin black ring for a two-tone contrast that holds its character across seasons and road conditions.\u003c\/p\u003e\u003cp\u003eRotary Forged Construction\u003c\/p\u003e\u003cp\u003eWeld Off-Road brings its racing-derived manufacturing discipline to the Swift through rotary forging. The barrel is heated and spun under pressure, compressing and densifying the aluminum grain structure for a stronger, stiffer barrel than standard casting delivers. That process is part of what lets Weld Off-Road carry its drag-strip engineering credibility into the off-road truck space, producing a wheel that holds up under the demands of lifted and loaded truck use. At 26 lbs, the Swift sits within the expected range for this size and construction.\u003c\/p\u003e\u003cp\u003eOffset and Fitment Details\u003c\/p\u003e\u003cp\u003eFord F-150 owners (2004-2026) and Bronco owners (2022-2026) get a wheel sized for trucks running leveling kits or lift kits, where the 17x9 footprint and -12mm offset position the mounting surface slightly rearward of centerline, pushing the wheel modestly outward for a more planted stance than stock. The 4.53 inches of backspacing and 5.47 inches of frontspacing reflect that outboard positioning. The same geometry applies across the Expedition (2003-2027), Lincoln Navigator (2003-2027), and F-150 Lightning (2022-2026) on the 6x135 side, and across GM full-size 6x139.7 platforms on the other. The Swift is also offered in additional sizes, finishes, and bolt-pattern options across the lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x135 \/ 6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.53\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBronze Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eRotary Forged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2500 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e26 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Weld Off-Road","offers":[{"title":"Default Title","offer_id":68713216672025,"sku":"W18079098450","price":325.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/swift_bronzeblack_white__72094.jpg?v=1794773528"},{"product_id":"18x9-gray-black-wheel-ledge-6-w107-6x135-0-w10789089501","title":"Ledge 6 W107 Gray Black | 18x9 | 6x135 0mm Offset | W10789089501","description":"\u003cp\u003eBuilt for the 6x135 Ford Platform\u003c\/p\u003e\u003cp\u003eFord F-150 owners (2004-2026) get a wheel sized and drilled for their platform right out of the box. The Weld Off-Road Ledge 6 W107 fits the 6x135 bolt pattern shared by the Ford F-150, Ford Expedition (2003-2027), Lincoln Navigator (2003-2027), Ford F-150 Lightning (2022-2026), and Ford Bronco (2022-2026), with one additional verified platform in the lineup. The 87.10mm hub bore fits these Ford applications, and the 5-inch backspacing at 0mm offset places the mounting surface exactly at the wheel's centerline, keeping the wheel positioned symmetrically within the fender arch. A center cap is included.\u003c\/p\u003e\u003cp\u003eSplit Six-Spoke Design with Simulated Beadlock\u003c\/p\u003e\u003cp\u003eThe Ledge 6 runs a split six-spoke layout with a concave face profile that gives the wheel visual depth from any angle. Exposed lug hardware sits in a circle around the hub bore at the center of the face, adding a purposeful, hardware-forward look that suits the off-road character of the design. The simulated beadlock ring wraps the outer edge in black, contrasting against the satin gunmetal gray finish across the face and spokes. The outer lip is visible behind the beadlock ring, completing the layered profile that defines this wheel's look on lifted Ford trucks.\u003c\/p\u003e\u003cp\u003eRotary Forged Construction\u003c\/p\u003e\u003cp\u003eWeld Off-Road brings its racing-derived manufacturing discipline to the Ledge 6 through rotary forging. The barrel is heated and spun under pressure, compressing and densifying the aluminum grain structure through the barrel wall for a stronger, more consistent result than standard casting alone. That process is part of what Weld has built its reputation on across both drag racing and off-road applications, and it shows up here in a wheel that weighs in at 29 lbs across an 18x9 footprint. The one-piece construction keeps the design clean and structurally unified from hub to barrel.\u003c\/p\u003e\u003cp\u003eFinish and Stance Details\u003c\/p\u003e\u003cp\u003eThe satin gunmetal gray finish covers the face and spokes with a subdued, non-reflective tone that holds its character in dusty, muddy, or wet conditions. The black simulated beadlock ring adds contrast at the outer edge without requiring the maintenance of a functional locking ring. At 18 inches in diameter and 9 inches wide with a 0mm offset, this wheel suits trucks running a leveling kit or lift kit where the centered mounting position and 18-inch diameter work well with larger tire fitments. The Ledge 6 is also offered in additional sizes, widths, finishes, and bolt patterns across the lineup.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x135\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eGray Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eRotary Forged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e29 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Weld Off-Road","offers":[{"title":"Default Title","offer_id":68713216835865,"sku":"W10789089501","price":360.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/ledge6_grayblack_white__13380.jpg?v=1794773530"},{"product_id":"17x9-red-wheel-cinch-beadlock-6x135-12-w90579098450","title":"Cinch Beadlock Red | 17x9 | 6x135 -12mm Offset | W90579098450","description":"\u003cp\u003eBuilt for the Ford 6x135 Platform\u003c\/p\u003e\u003cp\u003eFord F-150 owners (2004-2026) running the 6x135 bolt pattern have a wheel purpose-built for their platform in the Weld Off-Road Cinch Beadlock. The 106.10mm hub bore fits the F-150 and its platform siblings: the Ford Expedition (2003-2027), Lincoln Navigator (2003-2027), Ford F-150 Lightning (2022-2026), and Ford Bronco (2022-2026), plus one additional verified application. At 17x9 with a -12mm offset, the mounting surface sits rearward of centerline, pushing the wheel outward for a more aggressive stance than stock positioning delivers.\u003c\/p\u003e\u003cp\u003eSplit Seven-Spoke Design in Candy Red\u003c\/p\u003e\u003cp\u003eThe Cinch Beadlock runs a split seven-spoke layout that gives the face an open, angular look with visual depth between each paired spoke. The Candy Red finish is a bold, saturated color that stands apart from the standard black and machined options common across the truck wheel market. Exposed lug hardware sits in a circle around the hub bore at the center of the face, adding a raw, hardware-forward look that suits the wheel's off-road character. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eReal Beadlock, Not Simulated\u003c\/p\u003e\u003cp\u003eThe Cinch Beadlock is a functional beadlock wheel. The outer ring mechanically clamps the tire bead to the wheel, keeping the tire seated under low-pressure off-road conditions where a standard wheel would allow the bead to unseat. This is Weld Off-Road's drag racing engineering heritage applied to the off-road truck space: the same attention to structural integrity that defines Weld Racing's motorsport work carries into a wheel built for trucks that actually get used off-pavement.\u003c\/p\u003e\u003cp\u003eRotary Forged Construction\u003c\/p\u003e\u003cp\u003eWeld Off-Road builds the Cinch Beadlock using a rotary forged process: the cast barrel is heated and spun under pressure, compressing and densifying the aluminum grain structure through the barrel wall. The result is a stronger, lighter barrel than standard casting alone produces. At 26 lbs, this wheel lands at a competitive weight for its construction class, a meaningful number for a 17-inch beadlock wheel carrying the added mass of the locking ring. The one-piece structure keeps the design clean and the build straightforward.\u003c\/p\u003e\u003cp\u003eFitment Details\u003c\/p\u003e\u003cp\u003eThe 4.53 inches of backspacing and -12mm offset work together to position the wheel outward on the 6x135 platform, a combination suited to lifted F-150 builds where fender clearance opens up room for the wider wheel stance. The Cinch Beadlock is also offered in additional sizes, finishes, and bolt patterns across the lineup for builds with different fitment needs.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x135\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.53\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eRed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eRotary Forged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e26 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Weld Off-Road","offers":[{"title":"Default Title","offer_id":68713216868633,"sku":"W90579098450","price":685.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/cinchbeadlock_red_white__36802.jpg?v=1794773530"},{"product_id":"17x9-gloss-black-wheel-swift-8x170-12-w18479017450","title":"Swift Gloss Black | 17x9 | 8x170 -12mm Offset | W18479017450","description":"\u003cp\u003eBuilt for Ford Super Duty Platforms\u003c\/p\u003e\u003cp\u003eFord F-250 Super Duty and F-350 Super Duty owners running the 8x170 bolt pattern have a purpose-built option in the Weld Off-Road Swift. This 17x9 wheel covers the full 1999-2026 Super Duty generation span, along with one additional verified platform in the fitment lineup. The 125.1mm hub bore fits these Ford heavy-duty applications, and the 3,700-lb load rating is sized for the payload and towing demands that come with Super Duty ownership.\u003c\/p\u003e\u003cp\u003eSplit Eight-Spoke Design with Simulated Beadlock\u003c\/p\u003e\u003cp\u003eThe Swift runs a split eight-spoke layout with a concave face profile, giving the wheel visual depth and a forward-leaning stance that suits the scale of a heavy-duty truck. The outer ring carries a simulated beadlock treatment, adding the rugged, trail-ready aesthetic that Weld Off-Road is known for without the complexity of a functional locking ring. A center cap is included with this wheel, sitting over the hub area and keeping the lug hardware out of sight for a cleaner finished look. The gloss black finish runs across the entire face and simulated beadlock ring for a consistent, bold appearance.\u003c\/p\u003e\u003cp\u003eRotary Forged Construction\u003c\/p\u003e\u003cp\u003eWeld Off-Road brings its racing-derived manufacturing discipline to the Swift through rotary forging. The barrel is heated and spun under pressure, compressing and densifying the aluminum grain structure through the barrel wall for a stronger result than standard casting alone. That process is a natural fit for a wheel carrying the structural demands of a loaded Super Duty, and it delivers the combination of strength and weight efficiency that Weld has built its reputation on. At 26 lbs, the Swift comes in at a practical weight for a one-piece 17-inch heavy-duty truck wheel.\u003c\/p\u003e\u003cp\u003eFitment Details for the Super Duty Build\u003c\/p\u003e\u003cp\u003eThe F-250 and F-350 Super Duty are the anchor platforms for this wheel, and the 8x170 bolt pattern is exclusive to Ford's heavy-duty lineup. At -12mm offset, the mounting surface sits rearward of the wheel's centerline, pushing the wheel slightly outboard of a neutral position for a more planted, aggressive stance relative to stock. Backspacing measures 4.53 inches. This wheel is also offered in additional sizes and finishes across the Swift lineup for builds with different fitment targets.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e8x170\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.53\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e125.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eGloss Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eRotary Forged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e3700 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e26 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Weld Off-Road","offers":[{"title":"Default Title","offer_id":68713216901401,"sku":"W18479017450","price":325.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/swift_glossblack_8lug_white__68918.jpg?v=1794773530"},{"product_id":"20x9-bronze-black-wheel-ledge-6-6x135-0-w10609089500","title":"Ledge 6 Bronze Black | 20x9 | 6x135 0mm Offset | W10609089500","description":"\u003cp\u003eBuilt for Ford's 6x135 Platform\u003c\/p\u003e\u003cp\u003eThe Weld Off-Road Ledge 6 is a 20x9 wheel finished in Satin Bronze with a Black Simulated Beadlock ring, and it was built for Ford's 6x135 bolt pattern. That covers the F-150 (2004-2026), Expedition (2003-2027), Lincoln Navigator (2003-2027), F-150 Lightning (2022-2026), and Ford Bronco (2022-2026), plus one additional verified platform. The 87.1mm hub bore fits these Ford and Lincoln applications. At 0mm offset with 5 inches of backspacing, the mounting surface sits exactly at the wheel's centerline, positioning the barrel evenly between the hub face and the outer edge for a balanced, planted stance.\u003c\/p\u003e\u003cp\u003eSplit Six-Spoke Design with Simulated Beadlock\u003c\/p\u003e\u003cp\u003eThe Ledge 6 runs a split six-spoke face with a concave profile that draws the eye inward toward the hub. Lug hardware sits exposed around the hub bore, visible on the face as part of the design rather than hidden behind a cap. The Black Simulated Beadlock ring wraps the outer edge, giving the wheel the visual character of a beadlock build without the weight or complexity of a functional ring. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eRotary Forged Construction\u003c\/p\u003e\u003cp\u003eWeld Off-Road brings its racing engineering background to the Ledge 6 through rotary forging. The barrel is heated and spun under pressure, compressing and densifying the aluminum grain structure for a stronger, stiffer barrel than standard casting alone. That process is part of why Weld can deliver a wheel at this size with a 2,300-lb load rating while keeping the construction tight and consistent across the profile. At 37 lbs, the Ledge 6 sits right in line with what rotary forged 20-inch truck wheels typically weigh in this class.\u003c\/p\u003e\u003cp\u003eFinish and Visual Character\u003c\/p\u003e\u003cp\u003eThe Satin Bronze finish gives the face a warm, muted tone that works well against both dark and light truck exteriors. The Black Simulated Beadlock ring creates a strong contrast at the outer edge, framing the concave face and split spokes with a defined border. The exposed lug hardware around the hub adds another layer of visual detail that suits the off-road-influenced aesthetic Weld Off-Road is known for. The Ledge 6 is also offered in additional sizes, finishes, and bolt-pattern options across the lineup for builds with different fitment needs.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x135\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBronze Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eRotary Forged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2300 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e37 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Weld Off-Road","offers":[{"title":"Default Title","offer_id":68713217229081,"sku":"W10609089500","price":440.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/ledge6_bronzeblack_white__90316.jpg?v=1794773531"},{"product_id":"17x9-silver-machined-wheel-swift-8x170-12-w18579017450","title":"Swift Silver Machined | 17x9 | 8x170 -12mm Offset | W18579017450","description":"\u003cp\u003eBuilt for Ford Super Duty Platforms\u003c\/p\u003e\u003cp\u003eThe Ford F-250 and F-350 Super Duty (1999-2026) run the 8x170 bolt pattern, one of the most platform-specific fitments in the truck world. The Weld Off-Road Swift is drilled for exactly that pattern, with a 125.1mm hub bore that fits these Super Duty platforms. One additional verified application rounds out the fitment universe, making this a purpose-built wheel for heavy-duty Ford truck builds.\u003c\/p\u003e\u003cp\u003eSplit Eight-Spoke Design with Simulated Beadlock\u003c\/p\u003e\u003cp\u003eThe Swift carries a split eight-spoke face with a concave profile that gives the wheel visual depth from any angle. The spoke faces are machined to a brighter contrast against the gloss silver surfaces, creating a two-tone look that suits the aggressive character of a Super Duty build. A simulated beadlock ring runs the outer circumference, adding the rugged, off-road-ready aesthetic that Weld Off-Road is known for bringing from the racing world into the truck space. The center cap is included, sitting over the hub hardware for a clean, finished look at the center of the face.\u003c\/p\u003e\u003cp\u003eRotary Forged Construction\u003c\/p\u003e\u003cp\u003eWeld Off-Road's racing heritage shows up in how the Swift is built. The barrel is heated and spun under pressure during the rotary forging process, compressing and densifying the aluminum grain structure through the barrel wall. The result is a stronger, stiffer barrel than standard casting delivers, at a weight that reflects that process: this wheel comes in at 26 lbs. The one-piece construction keeps the face, barrel, and hub in a single continuous form, and the 3,700-lb load rating supports the payload and towing demands that Super Duty trucks are built around.\u003c\/p\u003e\u003cp\u003eOffset and Fitment Details\u003c\/p\u003e\u003cp\u003eAt 17x9 with a -12mm offset, the mounting surface sits rearward of the wheel's centerline, pushing the wheel outward for a more aggressive stance than stock positioning. The 4.53 inches of backspacing positions the wheel face outboard on the axle. This combination suits Super Duty builds running a lift kit, where the wider wheel position fills the fender arch with the planted, purposeful stance this size was designed for. The Swift is also offered in additional sizes, widths, and finishes across the lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e8x170\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.53\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e125.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSilver Machined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eRotary Forged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e3700 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e26 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Weld Off-Road","offers":[{"title":"Default Title","offer_id":68713217196313,"sku":"W18579017450","price":325.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/swift_silvermachined_8lug_white__17774.jpg?v=1794773531"},{"product_id":"17x9-red-black-wheel-cinch-w133-5x4-5-5x5-12-w13379026450","title":"Cinch W133 Red Black | 17x9 | 5x4.5\/5x5 -12mm Offset | W13379026450","description":"\u003cp\u003eSplit Seven-Spoke Design with Simulated Beadlock\u003c\/p\u003e\u003cp\u003eThe Weld Off-Road Cinch W133 brings Weld's racing-bred engineering to the off-road truck segment in a 17x9 format finished in Candy Red with a Satin Black simulated beadlock ring. Seven split spokes radiate from the hub in a clean, open pattern that gives the face visual depth without overcrowding the design. The simulated beadlock ring circles the outer edge in satin black, creating a sharp two-tone contrast against the candy red face. Exposed lug hardware sits in a ring around the hub bore, keeping the mounting hardware visible as part of the wheel's overall look. A center cap is included.\u003c\/p\u003e\u003cp\u003eRotary Forged Construction\u003c\/p\u003e\u003cp\u003eThe Cinch is built as a one-piece rotary forged wheel, a process that heats the cast barrel and spins it under pressure to compress and densify the aluminum grain structure. The result is a barrel that carries more structural integrity than standard low-pressure casting, with a weight that reflects the efficiency of the process. At 26 lbs, this 17-inch wheel lands right in the expected range for its construction class, making it a capable choice for trucks that see real off-road use without the premium of a fully forged piece.\u003c\/p\u003e\u003cp\u003eDual-Drilled for 5x114.3 and 5x127 Platforms\u003c\/p\u003e\u003cp\u003eThe Cinch is dual-drilled to cover two distinct bolt-pattern groups. The 5x114.3 (5x4.5) pattern fits platforms like the Toyota Tacoma (1995-2015), Ford Ranger (1983-2011), and Jeep Wrangler (1987-2006), among others. The 5x127 (5x5) pattern extends fitment to Jeep Cherokee (1974-2001) and similar applications. Across both patterns, the 78.10mm hub bore fits these platforms. The 4.53 inches of backspacing and -12mm offset place the mounting surface rearward of the wheel's centerline, pushing the wheel outward for a stance that sits wider than stock. At 9 inches wide with a -12mm offset, this combination sits at the threshold of outboard positioning, giving the build a more planted, aggressive look than a stock-width setup. Total verified fitment spans 162 applications across both bolt-pattern groups.\u003c\/p\u003e\u003cp\u003eFitment Details\u003c\/p\u003e\u003cp\u003eThe -12mm offset means the mounting surface sits behind the wheel's centerline, moving the wheel outward relative to the hub. On a 17x9 wheel, this produces a noticeable outboard position that suits trucks running a lift kit or leveling kit, where the added ride height and fender clearance complement the wider track. The Cinch is also offered in additional sizes, widths, and finishes across the W133 lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x114.3 \/ 5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.53\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e78.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eRed Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eRotary Forged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e26 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Weld Off-Road","offers":[{"title":"Default Title","offer_id":68713217261849,"sku":"W13379026450","price":370.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/cinch_redblack_white__65738.jpg?v=1794773531"},{"product_id":"20x12-brushed-wheel-vektor-xt-5x4-5-51-85d3-21254-517n","title":"Vektor XT Brushed | 20x12 | 5x4.5 -51mm Offset | 85D3-21254-517N","description":"\u003cp\u003eForged One-Piece Construction\u003c\/p\u003e\u003cp\u003eThe Weld Off-Road Vektor XT brings the brand's racing-derived forging heritage to the off-road truck space in a 20x12 package. One-piece forged construction means the wheel is shaped from a single billet of aluminum under high pressure, producing a denser, more consistent grain structure than casting alone. At 44.25 lbs for a 12-inch-wide forged 20-inch wheel, the Vektor XT comes in notably close to the typical weight for this class. The 2,600-lb load rating supports truck applications across the 5x114.3 (5x4.5) fitment universe, and the 73mm hub bore fits the platforms this wheel is built for.\u003c\/p\u003e\u003cp\u003eSplit Eight-Spoke Face With Exposed Hardware\u003c\/p\u003e\u003cp\u003eThe Vektor XT runs a split eight-spoke design, with each pair of spokes branching from the hub area and fanning outward across the face. Lug hardware sits exposed in a ring around the hub bore, visible on the face rather than hidden behind a center cap. Rivets accent the face as well, adding a detail layer that suits the wheel's off-road character. The overall face geometry is direct and purposeful, with the split spoke pattern giving the design visual depth without relying on machining or milling.\u003c\/p\u003e\u003cp\u003eBrushed Finish With Tinted Clear Coat\u003c\/p\u003e\u003cp\u003eThe finish is a brushed aluminum surface sealed under a tinted clear coat. The brushed texture gives the face a directional grain that shifts in appearance depending on the angle, while the tinted clear coat adds a subtle warmth over the raw aluminum and protects the surface from oxidation and road exposure. Backspacing measures 4.49 inches. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eAggressive Offset for a Wide Track\u003c\/p\u003e\u003cp\u003eAt -51mm, the mounting surface sits well rearward of the wheel's centerline, pushing the face and barrel outboard from the hub. Combined with the 12-inch width, this offset places the Vektor XT firmly in aggressive-fitment territory, with the wheel face sitting noticeably outside the fender plane on most builds. This is a setup that commits to a wide track and a pronounced stance, and it works best on trucks running a lift kit with appropriate clearance for the added width and outboard positioning.\u003c\/p\u003e\u003cp\u003eFitment Across 5x114.3 Platforms\u003c\/p\u003e\u003cp\u003eThe 5x114.3 (5x4.5) bolt pattern covers a wide range of trucks and SUVs. Verified fits include the Toyota Tacoma (1995-2015), Ford Ranger (1983-2011), Jeep Cherokee (1974-2001), Jeep Wrangler (1987-2006), and Toyota Pickup (1970-1995), with 10 additional verified platforms in the fitment universe. The Vektor XT is also offered in additional sizes and finishes across the lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x114.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-51 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.49\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e73 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBrushed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eForged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e44.25 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Weld Off-Road","offers":[{"title":"Default Title","offer_id":68713217556761,"sku":"85D3-21254-517N","price":1090.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/vektorxt_brushed_white__19404.jpg?v=1794773532"},{"product_id":"20x9-gray-black-wheel-ledge-6-6x135-0-w10709089500","title":"Ledge 6 Gray Black | 20x9 | 6x135 0mm Offset | W10709089500","description":"\u003cp\u003eBuilt for the 6x135 Ford Platform\u003c\/p\u003e\u003cp\u003eFord F-150 owners running the 6x135 bolt pattern have a deep lineup of verified fits here: the F-150 (2004-2026), F-150 Lightning (2022-2026), Expedition (2003-2027), Bronco (2022-2026), and Lincoln Navigator (2003-2027) all share this pattern, with one additional verified platform rounding out the fitment universe. The 87.1mm hub bore fits these Ford and Lincoln applications. At 20x9 with a 0mm offset, the mounting surface sits exactly at the wheel's centerline, placing the wheel in a neutral, balanced position relative to the fender.\u003c\/p\u003e\u003cp\u003eSplit Six-Spoke Design with Simulated Beadlock\u003c\/p\u003e\u003cp\u003eThe Ledge 6 carries Weld Off-Road's off-road identity in a split six-spoke layout with a concave face profile. Six split spokes radiate from the hub toward a black simulated beadlock ring at the outer edge, giving the wheel the visual character of a beadlock-capable off-road wheel without the added complexity. The satin gunmetal gray finish across the face contrasts cleanly against the black simulated beadlock ring, and the exposed lug hardware sits in a circle around the hub bore, visible on the face as part of the design. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eRotary Forged Construction\u003c\/p\u003e\u003cp\u003eWeld's racing heritage shapes how the Ledge 6 is built. The barrel is heated and spun under pressure in the rotary forging process, compressing and densifying the aluminum grain through the barrel wall for a stronger, more rigid structure than standard low-pressure casting alone. That process also trims weight relative to a fully cast barrel, and at 37 lbs this wheel lands at a competitive weight for its construction class. One-piece construction keeps the wheel's geometry consistent from hub to lip with no assembly joints.\u003c\/p\u003e\u003cp\u003eOffset and Backspacing Details\u003c\/p\u003e\u003cp\u003eThe 0mm offset puts the mounting surface at the wheel's true centerline, with 5 inches of backspacing. On a 9-inch-wide wheel, this positions the wheel in a neutral stance that works across stock, leveled, and lifted F-150 builds without pushing aggressively outboard or tucking inward. The 2,300-lb load rating supports the payload demands of full-size Ford truck and SUV applications. The Ledge 6 is also offered in additional sizes and finish options across the lineup for builds with different fitment targets.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x135\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eGray Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eRotary Forged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2300 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e37 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Weld Off-Road","offers":[{"title":"Default Title","offer_id":68713217589529,"sku":"W10709089500","price":440.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/ledge6_grayblack_white__92555.jpg?v=1794773532"},{"product_id":"17x9-gloss-black-wheel-cinch-5x4-5-5x5-0-w10579026500","title":"Cinch Gloss Black | 17x9 | 5x4.5\/5x5 0mm Offset | W10579026500","description":"\u003cp\u003eSplit Seven-Spoke Design with Simulated Beadlock Style\u003c\/p\u003e\u003cp\u003eThe Weld Off-Road Cinch brings the brand's racing-rooted engineering to a truck-ready 17x9 package. Seven split spokes radiate from the hub in a bold, open pattern, with milled spoke windows and accent details cutting through the gloss black finish for contrast and visual depth. The simulated beadlock ring wraps the outer edge, giving the wheel a rugged, trail-ready character without the weight or complexity of a functional beadlock setup. Rivets accent the beadlock ring, adding hardware detail that suits the off-road aesthetic. A center cap is included with this wheel, covering the lug hardware at the hub for a finished look.\u003c\/p\u003e\u003cp\u003eRotary Forged Construction\u003c\/p\u003e\u003cp\u003eThe Cinch is built using Weld's rotary forged process, where the cast barrel is heated and spun under pressure to compress and densify the aluminum grain structure through the barrel wall. That process is what lets Weld carry its drag racing engineering credibility into the off-road truck space: the result is a barrel that's stronger than standard low-pressure casting at a weight that makes sense for a 17-inch truck wheel. At 26 lbs, this wheel lands right at the typical weight for a rotary forged 17-inch truck wheel, reflecting the efficiency of the process. The one-piece alloy construction keeps the design clean and structurally unified from hub to barrel.\u003c\/p\u003e\u003cp\u003eFitment for 5x114.3 and 5x127 Platforms\u003c\/p\u003e\u003cp\u003eThe Cinch is dual-drilled, covering both the 5x114.3 (5x4.5) and 5x127 (5x5) bolt patterns in a single wheel. The 5x114.3 pattern fits platforms like the Toyota Tacoma (1995???2015), Ford Ranger (1983???2011), and Jeep Wrangler (1987???2006). The 5x127 pattern covers Jeep Grand Cherokee, Ram 1500 (pre-2019), and similar applications. Across both patterns, the Cinch fits 162 verified platforms, with the five primary fits above representing just a portion of that range. The 78.10mm hub bore fits these platforms, and the 2,200-lb load rating supports truck and SUV applications.\u003c\/p\u003e\u003cp\u003eOffset and Stance at 0mm\u003c\/p\u003e\u003cp\u003eAt 0mm offset on a 9-inch-wide wheel, the mounting surface sits exactly at the wheel's centerline, positioning the barrel evenly split between inboard and outboard. The 5-inch backspacing reflects that centered mount. This is a neutral, balanced offset that works across a wide range of builds without pushing aggressively outboard or tucking the wheel inward. The Cinch is also offered in additional sizes, finishes, and bolt-pattern options across the lineup for builds with different fitment targets.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x114.3 \/ 5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e78.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eGloss Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eRotary Forged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2200 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e26 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Weld Off-Road","offers":[{"title":"Default Title","offer_id":68713217753369,"sku":"W10579026500","price":325.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/cinch_glossblack_white__90280.jpg?v=1794773532"},{"product_id":"20x12-polished-wheel-vektor-xt-5x4-5-51-85a1-21254-510n","title":"Vektor XT Polished | 20x12 | 5x4.5 -51mm Offset | 85A1-21254-510N","description":"\u003cp\u003eForged One-Piece Construction With Racing Roots\u003c\/p\u003e\u003cp\u003eThe Weld Off-Road Vektor XT brings the brand's drag racing engineering heritage into the off-road truck space. This 20x12 wheel is forged as a single piece of aluminum, a process that compresses and aligns the grain structure of the metal for a stronger, denser result than casting alone. At 44.25 lbs in a 12-inch-wide, 20-inch-diameter forged wheel, the Vektor XT delivers the structural integrity that Weld's racing background demands. The one-piece construction means no welds, no seams, and no assembly joints to fatigue under repeated load.\u003c\/p\u003e\u003cp\u003eSplit Eight-Spoke Face and Polished Finish\u003c\/p\u003e\u003cp\u003eThe Vektor XT runs a split eight-spoke design, with each pair of spokes branching outward from the hub area to create an open, layered face. The full polished finish covers the entire wheel, giving the face and barrel a bright, mirror-like appearance that suits trucks where presence is the point. Exposed lug hardware sits in a circle around the hub bore, visible on the face and adding a purposeful, hardware-forward look to the center of the wheel. A center cap is included with this wheel. The wheel lip is a defined feature of the profile, consistent with the deep 12-inch barrel.\u003c\/p\u003e\u003cp\u003eOffset and Stance at -51mm\u003c\/p\u003e\u003cp\u003eAt -51mm, the mounting surface sits well rearward of the wheel's centerline, pushing the face and barrel outward from the hub. On a 12-inch-wide wheel, that combination places the Vektor XT firmly in aggressive-fitment territory, with the face sitting noticeably outboard of the fender plane on most applications. The 4.49 inches of backspacing reflects how far the inner barrel extends toward the suspension. This is a wheel built for trucks running lift kits where clearance has been opened up to accommodate the width and outboard positioning.\u003c\/p\u003e\u003cp\u003eFitment Across 5x114.3 (5x4.5) Platforms\u003c\/p\u003e\u003cp\u003eThe 73mm hub bore fits 5x114.3 (5x4.5) platforms. Verified fitment includes the Toyota Tacoma (1995-2015), Ford Ranger (1983-2011), Jeep Cherokee (1974-2001), Jeep Wrangler (1987-2006), and Toyota Pickup (1970-1995), with 10 additional verified platforms in the fitment universe across 162 total verified applications. The 2,600-lb load rating is sized for truck use across this platform range. The Vektor XT is also offered in additional sizes and finishes for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x114.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-51 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.49\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e73 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePolished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eForged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e44.25 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Weld Off-Road","offers":[{"title":"Default Title","offer_id":68713217917209,"sku":"85A1-21254-510N","price":1090.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/vektorxt_polished_white__39523.jpg?v=1794773533"},{"product_id":"20x9-bronze-black-wheel-ledge-6-6x135-20-w10609089575","title":"Ledge 6 Bronze Black | 20x9 | 6x135 +20mm Offset | W10609089575","description":"\u003cp\u003eBuilt on Ford's 6x135 Platform\u003c\/p\u003e\u003cp\u003eThe Ford F-150 (2004-2026) is the anchor platform for the Weld Off-Road Ledge 6, and the 6x135 bolt pattern extends that fitment to the Ford Expedition (2003-2027), Lincoln Navigator (2003-2027), Ford F-150 Lightning (2022-2026), and Ford Bronco (2022-2026), with one additional verified platform in the lineup. The 87.1mm hub bore fits these Ford and Lincoln applications. At 20x9 with a +20mm offset, the mounting surface sits forward of the wheel's centerline, positioning the wheel closer to the face side and keeping the stance composed within the fender arch. Backspacing measures 5.79 inches. The 2,300-lb load rating supports the demands of full-size truck and SUV use.\u003c\/p\u003e\u003cp\u003eSplit Six-Spoke Design with Simulated Beadlock\u003c\/p\u003e\u003cp\u003eThe Ledge 6 runs a split six-spoke layout with a concave face profile, giving the wheel visual depth that suits the scale of full-size Ford platforms. The standout detail is the black simulated beadlock ring that circles the outer edge, a design cue drawn from Weld Racing's off-road engineering heritage. It delivers the aggressive, purpose-built look of a beadlock wheel without the weight or complexity of a functional locking ring. Lug hardware is exposed and visible on the face, sitting in a circle around the hub bore where the wheel mounts to the vehicle, adding to the raw, mechanical character of the design.\u003c\/p\u003e\u003cp\u003eRotary Forged Construction\u003c\/p\u003e\u003cp\u003eWeld Off-Road builds the Ledge 6 using a rotary forged process, where the cast barrel is heated and spun under pressure to compress and densify the aluminum grain structure through the barrel wall. The result is a barrel that carries more structural integrity than standard casting alone, at a weight that reflects that process: this wheel comes in at 37 lbs. One-piece construction keeps the design clean and the build straightforward.\u003c\/p\u003e\u003cp\u003eSatin Bronze with Black Simulated Beadlock Finish\u003c\/p\u003e\u003cp\u003eThe Satin Bronze with Black Simulated Beadlock finish pairs a warm, muted bronze tone across the face and spokes with a contrasting black beadlock ring at the outer edge. Satin bronze holds up well against brake dust and road grime without the high-maintenance demands of a polished or chrome surface, making it a practical choice for trucks that see regular use. A center cap is included with this wheel. The Ledge 6 is also offered in additional sizes and finish options across the lineup for builds with different fitment targets.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x135\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5.79\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBronze Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eRotary Forged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2300 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e37 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Weld Off-Road","offers":[{"title":"Default Title","offer_id":68713218015513,"sku":"W10609089575","price":440.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/ledge6_bronzeblack_white__15805.jpg?v=1794773533"},{"product_id":"17x9-satin-black-wheel-cinch-5x4-5-5x5-12-w10479026450","title":"Cinch Satin Black | 17x9 | 5x4.5\/5x5 -12mm Offset | W10479026450","description":"\u003cp\u003eSplit Seven-Spoke Design With Simulated Beadlock\u003c\/p\u003e\u003cp\u003eThe Weld Off-Road Cinch brings the brand's racing-rooted engineering to a truck-ready package built for classic sport-truck and SUV platforms. The face runs seven split spokes in a satin black finish with gloss black windows and accents, giving the design a two-tone contrast that suits the Cinch's off-road character. A simulated beadlock ring wraps the outer edge, adding the visual weight and rugged identity of a beadlock-style wheel without the dedicated hardware. Rivets accent the ring, keeping the look consistent with Weld Off-Road's signature aesthetic. Exposed lug hardware sits in a circle around the hub bore, visible on the face and adding to the purposeful, hardware-forward look. A center cap is included.\u003c\/p\u003e\u003cp\u003eRotary Forged Construction\u003c\/p\u003e\u003cp\u003eThe Cinch is rotary forged, a process where the cast barrel is heated and spun under pressure, compressing and densifying the aluminum grain through the barrel wall. The result is a stronger, lighter barrel than standard casting alone, and at 26 lbs this wheel lands at a competitive weight for its construction class. One-piece construction keeps the design clean and structurally continuous from hub to barrel, with no seams or hardware to manage over time.\u003c\/p\u003e\u003cp\u003eFitment for 5x114.3 (5x4.5) and 5x127 (5x5) Platforms\u003c\/p\u003e\u003cp\u003eThe Cinch is dual-drilled, covering both the 5x114.3 (5x4.5) and 5x127 (5x5) bolt patterns in a single wheel. The 5x114.3 pattern fits Toyota Tacoma (1995???2015), Ford Ranger (1983???2011), Jeep Cherokee (1974???2001), Jeep Wrangler (1987???2006), and Toyota Pickup (1970???1995), with 10 additional verified platforms across the two patterns bringing the total fitment universe to 162 applications. The 78.10mm hub bore fits these platforms. Backspacing measures 4.53 inches.\u003c\/p\u003e\u003cp\u003eOffset and Stance\u003c\/p\u003e\u003cp\u003eAt -12mm offset on a 9-inch-wide barrel, the mounting surface sits rearward of the wheel's centerline, pushing the wheel outward relative to the hub. The 2,200-lb load rating supports the payload demands of the sport-truck and SUV platforms this wheel is built for. The Cinch is also offered in additional sizes, widths, and finishes across the Weld Off-Road lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x114.3 \/ 5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.53\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e78.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSatin Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eRotary Forged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2200 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e26 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Weld Off-Road","offers":[{"title":"Default Title","offer_id":68713218179353,"sku":"W10479026450","price":325.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/cinch_satinblack_white__39391.jpg?v=1794773533"},{"product_id":"20x14-black-wheel-vektor-xt-5x4-5-76-85b2-21454-768n","title":"Vektor XT Black | 20x14 | 5x4.5 -76mm Offset | 85B2-21454-768N","description":"\u003cp\u003eWide Stance on a 5x114.3 Platform\u003c\/p\u003e\u003cp\u003eAt 20 inches in diameter and 14 inches wide with a -76mm offset, the Weld Off-Road Vektor XT is built for builds that commit to an aggressive outboard stance. A -76mm offset moves the mounting surface deep behind the wheel's centerline, pushing the face well outward from the hub and producing significant poke. Paired with a 14-inch barrel width, this is a wheel for trucks where presence is the priority. The 5x114.3 (5x4.5) bolt pattern covers a wide range of sport-truck and SUV platforms, including the Toyota Tacoma, Ford Ranger, Jeep Wrangler, and similar 5-lug applications across 162 verified fits. The 73mm hub bore fits these 5x114.3 platforms. Backspacing measures 4.51 inches.\u003c\/p\u003e\u003cp\u003eOne-Piece Forged Construction\u003c\/p\u003e\u003cp\u003eThe Vektor XT is a one-piece forged wheel, which means the entire structure starts as a solid aluminum billet and is shaped under high pressure rather than cast from molten metal. Forging aligns and densifies the grain structure of the aluminum throughout the wheel, producing a stronger, more consistent piece than casting alone. At 46.25 lbs in this 20x14 size, the weight reflects the forged construction and the substantial barrel width. The one-piece build eliminates any seams or joints between sections, keeping the structure unified from hub to barrel.\u003c\/p\u003e\u003cp\u003eSplit Eight-Spoke Face with Milled Windows\u003c\/p\u003e\u003cp\u003eThe Vektor XT runs a split eight-spoke design with milled spoke windows cut into the face between each pair of spokes. The Gloss Black finish covers the face and barrel, while the milled windows open up the disc with a contrasting machined surface that breaks up the black. The result is a face with visual depth and a two-tone character without adding a secondary finish to the outer surfaces. The lug hardware sits exposed on the face around the hub bore, visible in a circle at the center of the wheel. A center cap is included.\u003c\/p\u003e\u003cp\u003eFitment Details\u003c\/p\u003e\u003cp\u003eVerified fitment includes the Toyota Tacoma (1995-2015), Ford Ranger (1983-2011), Jeep Cherokee (1974-2001), Jeep Wrangler (1987-2006), and Toyota Pickup (1970-1995), with 10 additional verified platforms beyond those five. The 2,600-lb load rating is rated for truck applications in this class. The Vektor XT is also offered in additional sizes, widths, and finishes across the lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x114.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-76 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.51\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e73 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eForged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e46.25 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Weld Off-Road","offers":[{"title":"Default Title","offer_id":68713218310425,"sku":"85B2-21454-768N","price":1135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/vektorxt_black_white__43372.jpg?v=1794773533"},{"product_id":"20x9-gray-black-wheel-ledge-6-6x135-20-w10709089575","title":"Ledge 6 Gray Black | 20x9 | 6x135 +20mm Offset | W10709089575","description":"\u003cp\u003eFord's 6x135 Platform, One Wheel Family\u003c\/p\u003e\u003cp\u003eThe Ford F-150 is the anchor platform for the Weld Off-Road Ledge 6, and this 20x9 covers the full 2004-2026 generation alongside the Ford Expedition (2003-2027), Lincoln Navigator (2003-2027), Ford F-150 Lightning (2022-2026), and Ford Bronco (2022-2026), with one additional verified fit beyond those five. The 87.1mm hub bore fits these 6x135 platforms, and the 2,300-lb load rating supports the payload demands of full-size truck and SUV use. Backspacing measures 5.79 inches.\u003c\/p\u003e\u003cp\u003eSplit Six-Spoke Design with Simulated Beadlock\u003c\/p\u003e\u003cp\u003eThe Ledge 6 runs a split six-spoke face with a concave profile that gives the wheel visual depth from any angle. Each of the six split spokes draws the eye inward toward the hub, where the lug hardware sits exposed and visible in a circle around the hub bore. That exposed hardware is part of the design intent, not an afterthought. Surrounding the face, a black simulated beadlock ring frames the outer edge, giving the wheel the rugged, off-road-ready character Weld Off-Road is known for without the added complexity of a functional beadlock. The outer lip completes the profile. A center cap is included.\u003c\/p\u003e\u003cp\u003eRotary Forged Construction\u003c\/p\u003e\u003cp\u003eWeld Off-Road brings its racing engineering background to the Ledge 6 through rotary forged construction. The barrel is heated and spun under pressure, compressing and densifying the aluminum grain structure for a stronger, stiffer barrel than standard casting alone delivers. At 37 lbs, this wheel sits right at the typical weight for a rotary forged 20-inch truck wheel, reflecting the construction's known advantage: meaningful barrel strength without the cost of full forging.\u003c\/p\u003e\u003cp\u003eSatin Gunmetal Gray Finish\u003c\/p\u003e\u003cp\u003eThe finish is Satin Gunmetal Gray across the face and spokes, with the black simulated beadlock ring providing a sharp contrast at the outer edge. Satin gunmetal sits between matte and gloss, holding a subdued metallic tone that suits the Ledge 6's off-road character. The +20mm offset positions the mounting surface forward of the wheel's centerline, keeping the wheel tucked within the fender profile on these Ford platforms. The Ledge 6 is also offered in additional sizes and finish options across the lineup for builds with different fitment targets.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x135\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5.79\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eGray Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eRotary Forged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2300 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e37 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Weld Off-Road","offers":[{"title":"Default Title","offer_id":68713218474265,"sku":"W10709089575","price":440.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/ledge6_grayblack_white__88463.jpg?v=1794773534"},{"product_id":"17x9-red-black-wheel-cinch-w133-5x4-5-5x5-0-w13379026500","title":"Cinch W133 Red Black | 17x9 | 5x4.5\/5x5 0mm Offset | W13379026500","description":"\u003cp\u003eSplit Seven-Spoke Style with Simulated Beadlock\u003c\/p\u003e\u003cp\u003eThe Weld Off-Road Cinch W133 brings Weld's racing-bred engineering to the off-road truck world in a finish that makes a statement before the truck even moves. The Candy Red face pairs with a Satin Black simulated beadlock ring for a two-tone look that suits builds where presence is the point. Seven split spokes radiate from the hub, giving the face an open, layered profile that works with the beadlock ring's visual weight. Exposed lug hardware sits in a circle around the hub bore, adding another layer of intentional detail to the face. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eRotary Forged Construction\u003c\/p\u003e\u003cp\u003eWeld built its reputation on precision manufacturing, and the Cinch carries that forward with rotary forged construction. The barrel is heated and spun under pressure, compressing and densifying the aluminum grain structure for a stronger, stiffer barrel than standard casting alone delivers. At 26 lbs, the Cinch lands within the expected range for a 17x9 truck wheel while benefiting from the structural refinement that rotary forging adds to the barrel. One-piece construction keeps the design clean and the build straightforward.\u003c\/p\u003e\u003cp\u003eDual-Drilled for 5x114.3 and 5x127 Platforms\u003c\/p\u003e\u003cp\u003eThe Cinch is dual-drilled to cover two distinct bolt-pattern groups. The 5x114.3 (5x4.5) pattern fits Toyota Tacoma (1995-2015), Ford Ranger (1983-2011), Jeep Wrangler (1987-2006), Jeep Cherokee (1974-2001), Toyota Pickup (1970-1995), and similar applications across 15 total verified platforms. The 5x127 (5x5) pattern opens the wheel to Jeep Wrangler JK Rubicon, Grand Cherokee, Ram 1500 pre-2019, and comparable platforms. The 78.10mm hub bore fits both bolt-pattern groups. With 162 verified fitments across both patterns, the Cinch covers a wide range of trucks and SUVs.\u003c\/p\u003e\u003cp\u003eOffset and Fitment Details\u003c\/p\u003e\u003cp\u003eAt 0mm offset, the mounting surface sits exactly at the wheel's centerline, positioning the barrel evenly between the inner and outer edges. This neutral offset works across a broad range of truck and SUV builds without pushing the wheel aggressively outboard or tucking it inward. Backspacing measures 5 inches. The 2,500-lb load rating supports the payload demands of the platforms this wheel fits. The Cinch is also offered in additional sizes and finish options across the W133 lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x114.3 \/ 5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e78.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eRed Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eRotary Forged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2500 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e26 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Weld Off-Road","offers":[{"title":"Default Title","offer_id":68713218572569,"sku":"W13379026500","price":370.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/cinch_redblack_white__25346.jpg?v=1794773534"},{"product_id":"20x14-brushed-wheel-vektor-xt-5x4-5-76-85d3-21454-767n","title":"Vektor XT Brushed | 20x14 | 5x4.5 -76mm Offset | 85D3-21454-767N","description":"\u003cp\u003eForged One-Piece Construction\u003c\/p\u003e\u003cp\u003eThe Weld Off-Road Vektor XT brings the brand's racing-derived forging heritage to the off-road truck market in a 20x14 package. One-piece forged construction means the wheel is shaped from a single billet of aluminum under high pressure, producing a denser, more consistent grain structure than casting alone. At 46.25 lbs in a 14-inch-wide, 20-inch-diameter format, the Vektor XT sits right in line with what forged wheels of this size and width typically weigh. The 2,600-lb load rating supports truck applications across the 5x114.3 (5x4.5) bolt pattern universe.\u003c\/p\u003e\u003cp\u003eSplit Eight-Spoke Face With Exposed Hardware\u003c\/p\u003e\u003cp\u003eThe Vektor XT runs a split eight-spoke design, with each pair of spokes branching outward from the hub area to the outer barrel. Lug hardware sits exposed in a circle around the hub bore at the center of the face, visible once the center cap is removed. Rivets accent the face as well, adding a detail that ties into the wheel's off-road character. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eBrushed Finish With Tinted Clear Coat\u003c\/p\u003e\u003cp\u003eThe finish is a brushed aluminum surface protected by a tinted clear coat. The brushed texture gives the face a directional grain that contrasts with the darker tinted clear, keeping the look purposeful without going full polished or full matte. Backspacing measures 4.51 inches.\u003c\/p\u003e\u003cp\u003eAggressive Offset for a Wide Stance\u003c\/p\u003e\u003cp\u003eAt -76mm, the mounting surface sits well rearward of the wheel's centerline, pushing the face significantly outboard of the hub. Combined with the 14-inch width, this offset commits to a wide, aggressive stance. This is a fitment for builds that have been set up specifically for this level of outboard positioning, and it looks its best on trucks running a lift kit with appropriate clearance.\u003c\/p\u003e\u003cp\u003eFitment Across 5x114.3 Platforms\u003c\/p\u003e\u003cp\u003eThe 73mm hub bore fits 5x114.3 (5x4.5) platforms. Verified fitment includes the Toyota Tacoma (1995-2015), Ford Ranger (1983-2011), Jeep Cherokee (1974-2001), Jeep Wrangler (1987-2006), and Toyota Pickup (1970-1995), among 10 additional verified platforms. The Vektor XT is also offered in additional sizes, widths, and finishes to suit a range of builds across both 5-lug and 6-lug bolt patterns.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x114.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-76 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.51\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e73 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBrushed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eForged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e46.25 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Weld Off-Road","offers":[{"title":"Default Title","offer_id":68713218638105,"sku":"85D3-21454-767N","price":1135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/vektorxt_brushed_white__08111.jpg?v=1794773534"},{"product_id":"20x10-bronze-black-wheel-ledge-6-6x135-18-w10600089475","title":"Ledge 6 Bronze Black | 20x10 | 6x135 -18mm Offset | W10600089475","description":"\u003cp\u003eBuilt for Ford's 6x135 Platform\u003c\/p\u003e\u003cp\u003eThe Ford F-150 (2004???2026) is the anchor platform for the Weld Off-Road Ledge 6, and the 6x135 bolt pattern extends that fitment to the Ford Expedition (2003???2027), Lincoln Navigator (2003???2027), Ford F-150 Lightning (2022???2026), and Ford Bronco (2022???2026), with one additional verified platform in the lineup. The 87.1mm hub bore fits these Ford and Lincoln applications. At 20x10 with a -18mm offset, the mounting surface sits rearward of the wheel's centerline, pushing the wheel outward for a more aggressive stance than stock positioning delivers. Backspacing measures 4.79 inches. The 2,300-lb load rating supports the payload demands of full-size truck and SUV use.\u003c\/p\u003e\u003cp\u003eSplit Six-Spoke Design with Simulated Beadlock\u003c\/p\u003e\u003cp\u003eThe Ledge 6 runs a split six-spoke layout with a concave face profile, giving the wheel visual depth that suits the proportions of a 20-inch truck build. Lug hardware is exposed and visible on the face, sitting in a circle around the hub bore where the wheel mounts to the vehicle. The simulated beadlock ring wraps the outer edge in black, contrasting against the Satin Bronze finish across the face and spokes. That combination of warm bronze tones and the black beadlock ring gives the wheel a layered, intentional look without relying on chrome or machined accents. A center cap is included.\u003c\/p\u003e\u003cp\u003eRotary Forged Construction\u003c\/p\u003e\u003cp\u003eWeld Off-Road brings its racing-derived manufacturing discipline to the Ledge 6 through rotary forging. The barrel is heated and spun under pressure, compressing and densifying the aluminum grain structure through the barrel wall for a stronger result than standard casting alone. That process keeps the wheel at 37 lbs across a 10-inch-wide, 20-inch barrel, which is competitive for this construction class. The one-piece alloy build keeps the design clean and structurally continuous from hub to lip.\u003c\/p\u003e\u003cp\u003eFitment Details\u003c\/p\u003e\u003cp\u003eFord F-150 owners running a leveling kit or lift kit get the most out of this 20x10 at -18mm, where the outboard wheel position and wide barrel fill the fender arch with a planted, aggressive profile. The F-150 Lightning and Bronco fitment extends the Ledge 6's reach across Ford's current 6x135 lineup, and the Expedition and Navigator fitment covers the full-size SUV side of the same platform family. The Ledge 6 is also offered in additional sizes and finish options across the lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x135\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-18 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.79\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBronze Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eRotary Forged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2300 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e37 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Weld Off-Road","offers":[{"title":"Default Title","offer_id":68713218834713,"sku":"W10600089475","price":455.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/ledge6_bronzeblack_white__60606.jpg?v=1794773535"},{"product_id":"17x9-satin-black-wheel-cinch-5x4-5-5x5-0-w10479026500","title":"Cinch Satin Black | 17x9 | 5x4.5\/5x5 0mm Offset | W10479026500","description":"\u003cp\u003eSplit Seven-Spoke Design with Simulated Beadlock\u003c\/p\u003e\u003cp\u003eThe Weld Off-Road Cinch brings the brand's racing-bred engineering to the off-road truck market in a 17x9 satin black wheel built for platforms running 5x114.3 (5x4.5) and 5x127 (5x5). The face carries seven split spokes radiating from the hub, with gloss black windows and accents contrasting against the satin black finish. A simulated beadlock ring circles the outer edge, giving the Cinch the aggressive off-road aesthetic that defines Weld Off-Road's lineup. Rivets accent the simulated ring, and the lug hardware sits exposed on the face around the hub bore, visible and intentional. A center cap is included.\u003c\/p\u003e\u003cp\u003eRotary Forged Construction\u003c\/p\u003e\u003cp\u003eWeld Off-Road builds the Cinch using a rotary forged process, where the cast barrel is heated and spun under pressure to compress and densify the aluminum grain structure through the barrel wall. That process produces a stronger, lighter barrel than standard casting alone, and it suits a wheel designed to take real off-road punishment without the full cost of a billet-forged build. At 26 lbs, the Cinch lands at a competitive weight for a rotary forged 17-inch truck wheel, keeping unsprung mass in check across the platforms it fits.\u003c\/p\u003e\u003cp\u003eFitment for 5x114.3 and 5x127 Platforms\u003c\/p\u003e\u003cp\u003eToyota Tacoma owners (1995-2015) and Ford Ranger owners (1983-2011) running the 5x114.3 bolt pattern get a wheel sized and styled for their trucks. The 5x127 drilling opens the Cinch to Jeep Wrangler (1987-2006) and Jeep Cherokee (1974-2001) builds, along with Toyota Pickup (1970-1995) applications, covering 15 verified platforms in total. The 78.10mm hub bore fits these 5-lug platforms across both bolt-pattern groups.\u003c\/p\u003e\u003cp\u003eOffset and Stance\u003c\/p\u003e\u003cp\u003eAt 0mm offset, the mounting surface sits exactly at the wheel's centerline, positioning the barrel evenly between the inner and outer edges. The 5-inch backspacing places the wheel in a neutral stance relative to the hub, working across stock, leveled, and lifted setups on these platforms. The Cinch is also offered in additional sizes, finishes, and bolt-pattern options across the broader Weld Off-Road lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x114.3 \/ 5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e78.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSatin Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eRotary Forged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2200 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e26 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Weld Off-Road","offers":[{"title":"Default Title","offer_id":68713219031321,"sku":"W10479026500","price":325.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/cinch_satinblack_white__76156.jpg?v=1794773535"},{"product_id":"20x14-polished-wheel-vektor-xt-5x4-5-76-85a1-21454-760n","title":"Vektor XT Polished | 20x14 | 5x4.5 -76mm Offset | 85A1-21454-760N","description":"\u003cp\u003eForged One-Piece Construction\u003c\/p\u003e\u003cp\u003eThe Weld Off-Road Vektor XT brings the brand's racing-derived forging heritage to the off-road truck space in a 20x14 package. One-piece forged construction means the wheel is shaped from a single billet of aluminum under high pressure, producing a denser, more consistent grain structure than casting alone. At 46.25 lbs, the Vektor XT comes in close to the typical weight for a forged 20-inch truck wheel in this width class, reflecting what the forging process delivers in structural integrity at this scale.\u003c\/p\u003e\u003cp\u003eSplit Eight-Spoke Face and Polished Finish\u003c\/p\u003e\u003cp\u003eThe face runs a split eight-spoke layout, with each pair of spokes branching from a shared root before fanning outward toward the outer edge. Exposed lug hardware sits in a circle around the hub bore at the center of the face, keeping the mounting hardware visible as part of the design rather than concealing it behind a cap. The polished finish covers the entire wheel, giving the face and barrel a bright, mirror-like appearance that holds its reflective character across the full surface. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOffset and Stance\u003c\/p\u003e\u003cp\u003eAt -76mm, the mounting surface sits well rearward of the wheel's centerline, pushing the face and barrel significantly outboard of the hub. On a 14-inch-wide wheel, that combination produces an aggressive outboard stance with pronounced poke beyond the fender line. The 4.51-inch backspacing and 10.49-inch front spacing reflect how far the barrel extends in each direction from the mounting face. This is a purpose-built aggressive fitment wheel, and the offset is one of the most negative available in this diameter class.\u003c\/p\u003e\u003cp\u003eFitment Across 5x114.3 (5x4.5) Platforms\u003c\/p\u003e\u003cp\u003eThe 73mm hub bore and 5x114.3 (5x4.5) bolt pattern cover a wide range of truck and SUV platforms. Verified fits include the Toyota Tacoma (1995-2015), Ford Ranger (1983-2011), Jeep Cherokee (1974-2001), Jeep Wrangler (1987-2006), and Toyota Pickup (1970-1995), with 10 additional verified platforms in the fitment universe. The 2,600-lb load rating is sized for truck applications across this platform group. The Vektor XT is also offered in additional sizes and finishes for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x114.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-76 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.51\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e73 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePolished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eForged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e46.25 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Weld Off-Road","offers":[{"title":"Default Title","offer_id":68713218998553,"sku":"85A1-21454-760N","price":1135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/vektorxt_polished_white__30276.jpg?v=1794773535"},{"product_id":"20x12-bronze-black-wheel-ledge-6-6x135-44-w10602089475","title":"Ledge 6 Bronze Black | 20x12 | 6x135 -44mm Offset | W10602089475","description":"\u003cp\u003eBuilt for Ford's 6x135 Platform\u003c\/p\u003e\u003cp\u003eFord F-150 owners (2004-2026) get a wheel sized for aggressive truck fitment, and the Weld Off-Road Ledge 6 delivers exactly that. The 6x135 bolt pattern covers the full F-150 lineup across those model years, along with the Ford Expedition (2003-2027), Lincoln Navigator (2003-2027), Ford F-150 Lightning (2022-2026), and Ford Bronco (2022-2026), plus one additional verified platform. The 87.1mm hub bore fits these Ford and Lincoln applications. At 20x12 with a -44mm offset, the mounting surface sits well rearward of the wheel's centerline, pushing the wheel outward for a wide, aggressive stance that suits lifted truck builds running this platform.\u003c\/p\u003e\u003cp\u003eSplit Six-Spoke Design with Simulated Beadlock\u003c\/p\u003e\u003cp\u003eThe Ledge 6 runs a split six-spoke face with a concave profile that adds visual depth to the design. Lug hardware is exposed and visible around the hub area, sitting in a circle at the center of the face where the wheel mounts to the vehicle. The Black simulated beadlock ring wraps the outer edge, giving the wheel the rugged, off-road character Weld Off-Road is known for without the complexity of a functional beadlock setup. The Satin Bronze finish across the face and spokes contrasts sharply against the black ring for a two-tone look that suits lifted Ford builds. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eRotary Forged Construction\u003c\/p\u003e\u003cp\u003eWeld Off-Road brings its racing-derived manufacturing discipline to the Ledge 6 through rotary forging. The barrel is heated and spun under pressure, compressing and densifying the aluminum grain structure through the barrel wall for a stronger, stiffer result than standard casting alone. That process keeps the wheel at 37 lbs across a 12-inch-wide, 20-inch barrel, which is competitive weight for its construction class. The one-piece build integrates the face and barrel into a single continuous structure, and the 2,300-lb load rating supports the demands of a full-size Ford truck.\u003c\/p\u003e\u003cp\u003eOffset and Fitment Details\u003c\/p\u003e\u003cp\u003eThe -44mm offset on this 12-inch-wide wheel places the mounting surface deep behind centerline, moving the wheel outward relative to the hub. On a lifted F-150 or Bronco, that outboard positioning fills the fender arch with a planted, wide-track stance. Backspacing measures 4.77 inches. The Ledge 6 is also offered in additional sizes, widths, and finish options across the lineup for builds with different fitment targets.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x135\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-44 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.77\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBronze Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eRotary Forged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2300 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e37 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Weld Off-Road","offers":[{"title":"Default Title","offer_id":68713219326233,"sku":"W10602089475","price":485.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/ledge6_bronzeblack_white__54381.jpg?v=1794773536"},{"product_id":"22x12-brushed-wheel-vektor-xt-5x4-5-51-85d3-22254-517n","title":"Vektor XT Brushed | 22x12 | 5x4.5 -51mm Offset | 85D3-22254-517N","description":"\u003cp\u003eForged One-Piece Construction from Weld Off-Road\u003c\/p\u003e\u003cp\u003eThe Weld Off-Road Vektor XT brings the brand's drag racing engineering heritage into the off-road truck space. This 22x12 wheel is forged as a single piece of aluminum, meaning the entire structure is shaped from one billet rather than cast in a mold or assembled from multiple sections. Forging aligns and densifies the aluminum grain structure throughout the wheel, producing a stronger, more consistent piece than low-pressure casting. At 53.38 lbs, the weight reflects the 22-inch diameter and 12-inch width of a full-size forged truck wheel.\u003c\/p\u003e\u003cp\u003eSplit Eight-Spoke Face with Exposed Hardware\u003c\/p\u003e\u003cp\u003eThe Vektor XT runs a split eight-spoke design with exposed lug hardware sitting in a circle around the hub bore at the center of the face. The lugs are visible and on display rather than hidden behind a center cap, giving the face an intentional, hardware-forward look. Rivets accent the wheel as well, adding another layer of visual detail to the face. The 73mm hub bore fits 5x114.3 (5x4.5) platforms across the verified fitment range.\u003c\/p\u003e\u003cp\u003eBrushed Finish with Tinted Clear Coat\u003c\/p\u003e\u003cp\u003eThe finish is a brushed aluminum surface sealed under a tinted clear coat. The brushed texture gives the face a directional, metallic character, and the tinted clear coat deepens the tone while protecting the surface from oxidation and road exposure. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOffset and Stance at -51mm\u003c\/p\u003e\u003cp\u003eAt -51mm, the mounting surface sits well rearward of the wheel's centerline, pushing the face outboard from the hub. On a 12-inch-wide barrel, that combination places the wheel significantly outside the stock track, which is the defining stance move for builds running leveling kits or lift kits on 5x114.3 platforms. This is an aggressive outboard position that commits the build to a wider, more dominant stance.\u003c\/p\u003e\u003cp\u003eFitment Across 5x114.3 Platforms\u003c\/p\u003e\u003cp\u003eThe Vektor XT in this size fits Toyota Tacoma (1995-2015), Ford Ranger (1983-2011), Jeep Cherokee (1974-2001), Jeep Wrangler (1987-2006), and Toyota Pickup (1970-1995), with 10 additional verified platforms in the fitment range, covering 162 total verified applications. The Vektor XT is also offered in additional sizes, widths, and finishes to suit other builds and bolt-pattern groups.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x114.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-51 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.49\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e73 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBrushed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eForged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e53.38 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Weld Off-Road","offers":[{"title":"Default Title","offer_id":68713219359001,"sku":"85D3-22254-517N","price":1185.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/vektorxt_brushed_white__81018.jpg?v=1794773536"},{"product_id":"17x10-satin-black-wheel-cinch-5x4-5-5x5-25-w10470026450","title":"Cinch Satin Black | 17x10 | 5x4.5\/5x5 -25mm Offset | W10470026450","description":"\u003cp\u003eSplit Seven-Spoke Design with Simulated Beadlock\u003c\/p\u003e\u003cp\u003eThe Weld Off-Road Cinch brings the brand's racing-rooted engineering to a truck-focused wheel built for aggressive off-road style. The split seven-spoke face is finished in satin black, with gloss black windows and accents adding contrast across the face. A simulated beadlock ring runs the outer circumference, giving the Cinch the visual character of a full beadlock build without the weight penalty. Rivets accent the beadlock ring, and the exposed lug hardware sits in a circle around the hub bore where the wheel mounts to the vehicle, keeping the mechanical look consistent across the face. A center cap is included.\u003c\/p\u003e\u003cp\u003eRotary Forged Construction\u003c\/p\u003e\u003cp\u003eThe Cinch is built using Weld's rotary forged process, where the cast barrel is heated and spun under pressure, compressing and densifying the aluminum grain through the barrel wall. That process is what lets Weld carry its drag-strip engineering DNA into the off-road space: a stronger, stiffer barrel than standard casting, at a weight that makes sense for a 17x10 truck wheel. At 26 lbs, the Cinch delivers the structural integrity the 2,500-lb load rating demands without unnecessary bulk. One-piece alloy construction keeps the design clean and the build straightforward.\u003c\/p\u003e\u003cp\u003eFitment for 5x114.3 (5x4.5) and 5x127 (5x5) Platforms\u003c\/p\u003e\u003cp\u003eThe Cinch is dual-drilled, covering two distinct bolt-pattern groups in a single wheel. The 5x114.3 (5x4.5) pattern fits Toyota Tacoma (1995-2015), Ford Ranger (1983-2011), Jeep Wrangler (1987-2006), Jeep Cherokee (1974-2001), Toyota Pickup (1970-1995), and similar sport-truck and SUV platforms. The 5x127 (5x5) pattern opens fitment to Jeep Wrangler JK Rubicon, Grand Cherokee, Ram 1500 pre-2019, and comparable platforms. The 78.10mm hub bore fits both bolt-pattern groups across these applications, covering 162 verified fitments in total.\u003c\/p\u003e\u003cp\u003eOffset and Stance\u003c\/p\u003e\u003cp\u003eAt 17x10 with a -25mm offset, the mounting surface sits rearward of the wheel's centerline, pushing the face outward for a wider, more aggressive stance than stock. With a 10-inch width and a -25mm offset, this combination qualifies as a genuinely wide fitment: expect outboard wheel positioning and visible poke on most applications. Backspacing measures 4.52 inches. This wheel is a strong fit for trucks running a lift kit, where the added clearance lets the wider track work without compromise.\u003c\/p\u003e\u003cp\u003eAdditional Sizes and Finishes\u003c\/p\u003e\u003cp\u003eThe Weld Off-Road Cinch is offered across additional sizes, widths, and finishes beyond this satin black 17x10, including both 6-lug and 8-lug bolt patterns for a broader range of truck platforms.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x114.3 \/ 5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-25 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.52\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e78.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSatin Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eRotary Forged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2500 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e26 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Weld Off-Road","offers":[{"title":"Default Title","offer_id":68713219522841,"sku":"W10470026450","price":340.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/cinch_satinblack_white__84256.jpg?v=1794773536"},{"product_id":"17x9-bronze-black-wheel-ledge-6-w106-6x5-5-12-w10679084450","title":"Ledge 6 W106 Bronze Black | 17x9 | 6x5.5 -12mm Offset | W10679084450","description":"\u003cp\u003eBuilt on Weld's Racing Heritage\u003c\/p\u003e\u003cp\u003eThe Weld Off-Road Ledge 6 W106 brings the engineering discipline of Weld Racing's drag-strip roots into the off-road truck space. This 17x9 wheel arrives in a Satin Bronze finish with a Black Simulated Beadlock ring, giving it the rugged, trail-ready look of a true beadlock without the added complexity. The exposed lug hardware sits in a circle around the hub bore at the center of the face, adding a purposeful, hardware-forward detail that suits the wheel's off-road character. A center cap is included.\u003c\/p\u003e\u003cp\u003eSplit Six-Spoke Design with Concave Depth\u003c\/p\u003e\u003cp\u003eThe Ledge 6 runs a split six-spoke layout with a concave face profile, giving the wheel visual depth and a forward-leaning stance that works well on lifted truck builds. The simulated beadlock ring traces the outer edge of the face in black, contrasting cleanly against the satin bronze spokes and adding a layered, intentional look to the overall design. The outer lip is present and visible, contributing to the wheel's depth when viewed from the front.\u003c\/p\u003e\u003cp\u003eRotary Forged One-Piece Construction\u003c\/p\u003e\u003cp\u003eWeld builds the Ledge 6 as a one-piece rotary forged wheel. The barrel is heated and spun under pressure, compressing and densifying the aluminum grain structure through the barrel section for a stronger, stiffer result than standard low-pressure casting alone. That process also trims weight without sacrificing structural integrity, and at 26 lbs this wheel delivers the kind of long-term durability Weld's reputation is built on. The 4.53 inches of backspacing rounds out the structural picture.\u003c\/p\u003e\u003cp\u003eFitment Across the 6x139.7 Platform\u003c\/p\u003e\u003cp\u003eThe Chevrolet Silverado 1500 (1999-2026) and GMC Sierra 1500 (2000-2026) are natural homes for this wheel, and it also fits the Toyota Tacoma (1995-2026), Toyota Tundra (2000-2026), and Chevrolet K1500 (1988-1999), among 114 total verified fits across the 6x139.7 (6x5.5) bolt pattern. The 106.10mm hub bore fits these platforms. At -12mm offset, the mounting surface sits just rearward of the wheel's centerline, positioning the face slightly outboard of stock for a more assertive stance. The Ledge 6 is also offered in additional sizes, widths, and finish options across the lineup for builds with different fitment needs.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.53\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBronze Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eRotary Forged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e26 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Weld Off-Road","offers":[{"title":"Default Title","offer_id":68713219752217,"sku":"W10679084450","price":325.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/ledge6_bronzeblack_white__85002.jpg?v=1794773537"},{"product_id":"22x14-black-wheel-vektor-xt-5x4-5-76-85b2-22454-768n","title":"Vektor XT Black | 22x14 | 5x4.5 -76mm Offset | 85B2-22454-768N","description":"\u003cp\u003eForged One-Piece Construction\u003c\/p\u003e\u003cp\u003eThe Weld Off-Road Vektor XT is built from a single forged aluminum billet. In the forging process, aluminum is compressed under high pressure, aligning the grain structure throughout the wheel for a denser, stronger result than casting alone. That structural integrity carries through the full 22-inch diameter and 14-inch width, supporting a 2,600-lb load rating in a one-piece form with no welds or seams. At 55.38 lbs, this is a substantial wheel for its class, which reflects the forged construction and the wide 14-inch barrel. Backspacing measures 4.51 inches.\u003c\/p\u003e\u003cp\u003eSplit Eight-Spoke Face with Milled Windows\u003c\/p\u003e\u003cp\u003eThe Vektor XT runs a split eight-spoke layout with milled spoke windows cut into each spoke. The milling opens up the face between the split spoke pairs, creating contrast between the gloss black surfaces and the brighter milled areas. Lug hardware is exposed and visible on the face, sitting in a circle around the 73mm hub bore where the wheel mounts to the vehicle. A center cap is included with this wheel, though the exposed lug hardware remains the defining visual detail of the face.\u003c\/p\u003e\u003cp\u003eOffset and Stance\u003c\/p\u003e\u003cp\u003eAt -76mm, the mounting surface sits well rearward of the wheel's centerline, pushing the face significantly outboard from the hub. On a 14-inch-wide wheel, that offset places the face well outside the fender plane on most truck platforms, producing a pronounced outboard stance. This is an aggressive fitment spec, suited to builds running lift kits where fender clearance accommodates the extra track width.\u003c\/p\u003e\u003cp\u003eFitment Across 5x114.3 (5x4.5) Platforms\u003c\/p\u003e\u003cp\u003eThe 5x114.3 (5x4.5) bolt pattern and 73mm hub bore fit a wide range of truck and SUV platforms. Verified fitment includes the Toyota Tacoma (1995-2015), Ford Ranger (1983-2011), Jeep Cherokee (1974-2001), Jeep Wrangler (1987-2006), and Toyota Pickup (1970-1995), with 10 additional verified platforms in the fitment universe of 162 total applications. The Vektor XT is also offered in additional sizes, widths, and finishes across the lineup to cover other bolt-pattern groups and build targets.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x114.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-76 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.51\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e73 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eForged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e55.38 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Weld Off-Road","offers":[{"title":"Default Title","offer_id":68713219719449,"sku":"85B2-22454-768N","price":1250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/vektorxt_black_white__80774.jpg?v=1794773537"},{"product_id":"17x9-satin-bronze-wheel-cinch-w115-5x4-5-5x5-0-w11579026500","title":"Cinch W115 Satin Bronze | 17x9 | 5x4.5\/5x5 0mm Offset | W11579026500","description":"\u003cp\u003eSplit Seven-Spoke Design with Simulated Beadlock\u003c\/p\u003e\u003cp\u003eThe Weld Off-Road Cinch W115 brings Weld's racing-bred engineering to the off-road truck segment in a 17x9 Satin Bronze finish. The split seven-spoke face gives the wheel an open, aggressive look, and the satin black simulated beadlock ring around the outer edge adds visual weight and off-road character without the complexity of a functional locking ring. Lug hardware sits exposed on the face around the hub bore, visible in a circle at the center of the wheel where it mounts to the vehicle. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eRotary Forged Construction\u003c\/p\u003e\u003cp\u003eThe Cinch is built using Weld's rotary forged process, which starts with a cast blank that is then heated and spun under pressure. That spinning step compresses and densifies the aluminum grain through the barrel, producing a stronger, stiffer barrel than standard casting alone at a weight that reflects the process. At 26 lbs, this 17-inch wheel lands right at the typical weight for its construction class, a result of the rotary forged barrel doing more structural work with less material. One-piece construction keeps the design clean and the build straightforward.\u003c\/p\u003e\u003cp\u003eOffset and Stance at 0mm\u003c\/p\u003e\u003cp\u003eAt 0mm offset on a 9-inch width, the mounting surface sits exactly at the wheel's centerline, placing the barrel evenly split between inboard and outboard. The 5 inches of backspacing matches the 5 inches of frontspacing, so the wheel sits centered in the fender arch rather than pushed outboard or tucked inward. This is a balanced, neutral stance that works across a wide range of truck builds, from stock-height setups to lifted trucks where the wider tire clearance opens up more room to run this size comfortably. The 78.1mm hub bore fits the 5x114.3 and 5x127 platforms this wheel is drilled for.\u003c\/p\u003e\u003cp\u003eFitment for 5x114.3 (5x4.5) and 5x127 (5x5) Platforms\u003c\/p\u003e\u003cp\u003eThe Cinch is dual-drilled to cover two distinct bolt-pattern groups. The 5x114.3 (5x4.5) pattern fits Toyota Tacoma (1995-2015), Ford Ranger (1983-2011), Jeep Cherokee (1974-2001), Jeep Wrangler (1987-2006), and Toyota Pickup (1970-1995), among 10 additional verified platforms. The 5x127 (5x5) pattern extends fitment to Jeep Wrangler JK Rubicon, Grand Cherokee, Ram 1500 pre-2019, and similar applications. Combined, this wheel covers 162 verified fitments across both bolt-pattern groups, making it a practical choice for a broad range of trucks and SUVs in the off-road segment.\u003c\/p\u003e\u003cp\u003eAvailable Across the Cinch Lineup\u003c\/p\u003e\u003cp\u003eThe Cinch W115 is offered in additional sizes, widths, finishes, and bolt-pattern options beyond this specific 17x9 Satin Bronze setup, so there are configurations to suit different build directions within the same wheel family.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x114.3 \/ 5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e78.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSatin Bronze\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eRotary Forged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e26 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Weld Off-Road","offers":[{"title":"Default Title","offer_id":68713219948825,"sku":"W11579026500","price":325.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/cinch_satinbronze_white__48637.jpg?v=1794773538"},{"product_id":"22x14-brushed-wheel-vektor-xt-5x4-5-76-85d3-22454-767n","title":"Vektor XT Brushed | 22x14 | 5x4.5 -76mm Offset | 85D3-22454-767N","description":"\u003cp\u003eForged One-Piece Construction from Weld Off-Road\u003c\/p\u003e\u003cp\u003eThe Weld Off-Road Vektor XT brings the brand's racing-derived forging heritage to the off-road truck space in a 22x14 package. Rather than casting aluminum into a mold, forging compresses and works the aluminum billet under high pressure, aligning the grain structure throughout the wheel for a denser, stronger result. At 55.38 lbs in this 22-inch, 14-inch-wide format, the weight reflects the demands of the platform: a forged one-piece wheel at this scale carries the structural integrity to handle the stresses of aggressive truck use.\u003c\/p\u003e\u003cp\u003eSplit Eight-Spoke Face with Exposed Hardware\u003c\/p\u003e\u003cp\u003eThe Vektor XT runs a split eight-spoke design across the face, with each spoke dividing as it moves outward from the hub. Lug hardware sits exposed in a circle around the hub bore, visible on the face where the wheel mounts to the vehicle. Rivets accent the design, adding visual detail consistent with Weld Off-Road's off-road aesthetic. The wheel is non-directional, so mounting orientation is not a concern.\u003c\/p\u003e\u003cp\u003eBrushed Finish with Tinted Clear Coat\u003c\/p\u003e\u003cp\u003eThe finish is a brushed aluminum surface protected by a tinted clear coat. The brushed texture gives the face a linear, metallic character, and the tinted clear coat adds depth while shielding the surface from the elements. This is a finish that suits builds where a clean, industrial look is the goal rather than a high-gloss or chrome presentation. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOffset, Dimensions, and Fitment\u003c\/p\u003e\u003cp\u003eAt -76mm offset, the mounting surface sits well rearward of the wheel's centerline, pushing the face significantly outboard. Combined with the 14-inch width, this is an aggressive outboard stance that places the wheel face well outside the hub. Backspacing measures 4.51 inches. The 73mm hub bore fits 5x114.3 (5x4.5) platforms. Verified fitment includes the Toyota Tacoma (1995-2015), Ford Ranger (1983-2011), Jeep Cherokee (1974-2001), Jeep Wrangler (1987-2006), and Toyota Pickup (1970-1995), among 15 total verified platforms. The load rating is 2,600 lbs.\u003c\/p\u003e\u003cp\u003eThe Vektor XT is also offered in additional sizes and finish options across the lineup, covering both 6-lug and other 5-lug bolt patterns for a range of truck and SUV applications.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x114.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-76 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.51\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e73 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBrushed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eForged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e55.38 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Weld Off-Road","offers":[{"title":"Default Title","offer_id":68713220079897,"sku":"85D3-22454-767N","price":1250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/vektorxt_brushed_white__11262.jpg?v=1794773538"},{"product_id":"17x9-red-black-wheel-ledge-6-w134-6x5-5-12-w13479084450","title":"Ledge 6 W134 Red Black | 17x9 | 6x5.5 -12mm Offset | W13479084450","description":"\u003cp\u003eBuilt on Weld's Off-Road Heritage\u003c\/p\u003e\u003cp\u003eThe Weld Off-Road Ledge 6 W134 brings the brand's racing-rooted engineering to the 6x139.7 (6x5.5) truck platform in a finish that makes a statement before the truck even moves. Candy Red with a Gloss Black simulated beadlock ring gives this wheel a two-tone look that suits builds where color and stance are part of the plan. At 17x9 with a -12mm offset, the mounting surface sits rearward of centerline, pushing the wheel outward for a more aggressive stance than stock. The 106.10mm hub bore fits the 6x139.7 platform, and the 4.53 inches of backspacing positions the wheel appropriately for lifted truck applications.\u003c\/p\u003e\u003cp\u003eSplit Six-Spoke Design with Simulated Beadlock\u003c\/p\u003e\u003cp\u003eThe Ledge 6 runs a split six-spoke face with a concave profile that draws the eye inward toward the hub. Exposed lug hardware sits in a circle around the hub bore, visible on the face and adding a functional, hardware-forward look to the design. The Gloss Black simulated beadlock ring wraps the outer edge, giving the wheel the visual character of a beadlock build without the weight or complexity of a true locking ring. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eRotary Forged Construction\u003c\/p\u003e\u003cp\u003eWeld built the Ledge 6 using a rotary forged process, which starts with a cast blank that is then heated and spun under pressure. That spinning step compresses and densifies the aluminum grain through the barrel, producing a stronger, lighter barrel than standard casting alone. At 26 lbs, the Ledge 6 delivers the structural integrity Weld's off-road lineup is known for, with the barrel refinement that rotary forging adds over a conventional cast process. One-piece construction keeps the design clean and the build straightforward.\u003c\/p\u003e\u003cp\u003eFitment Across the 6x139.7 Platform\u003c\/p\u003e\u003cp\u003eThe Chevrolet Silverado 1500 (1999-2026) and GMC Sierra 1500 (2000-2026) are natural homes for this wheel, along with the Toyota Tacoma (1995-2026), Toyota Tundra (2000-2026), and Chevrolet K1500 (1988-1999). In total, this wheel fits 114 verified platforms across the 6x139.7 bolt pattern, covering a wide range of full-size and mid-size truck applications. The Ledge 6 is also offered in additional sizes, widths, and finishes across the lineup for builds that need a different fit.\u003c\/p\u003e\u003cp\u003eColor and Stance Details\u003c\/p\u003e\u003cp\u003eThe Candy Red finish covers the spoke faces and inner wheel surfaces, while the Gloss Black simulated beadlock ring frames the outer edge in a sharp contrast. The concave spoke profile adds visual depth to the face, and the split spoke geometry gives the design an open, layered look that works well on lifted truck builds. At -12mm offset on a 9-inch width, this wheel sits outboard of a stock position, giving the truck a wider, more planted appearance at the fender.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.53\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eRed Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eRotary Forged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e26 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Weld Off-Road","offers":[{"title":"Default Title","offer_id":68713220243737,"sku":"W13479084450","price":335.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/ledge6_redblack_white__03767.jpg?v=1794773538"},{"product_id":"20x9-gloss-black-wheel-cinch-w105-5x5-0-w10509057501","title":"Cinch W105 Gloss Black | 20x9 | 5x5 0mm Offset | W10509057501","description":"\u003cp\u003eBuilt for the 5x127 Platform\u003c\/p\u003e\u003cp\u003eJeep Wrangler owners (2007-2026) and Jeep Grand Cherokee drivers (1999-2026) are the natural home for the Weld Off-Road Cinch W105. The 5x127 (5x5) bolt pattern also fits Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), with 10 additional verified platforms rounding out the fitment universe. The 87.10mm hub bore fits these applications, and the 5-inch backspacing puts the mounting surface exactly at the wheel's centerline with a 0mm offset, positioning the wheel squarely in the fender arch.\u003c\/p\u003e\u003cp\u003eSplit Seven-Spoke Design with Milled Windows\u003c\/p\u003e\u003cp\u003eThe Cinch runs a split seven-spoke layout with milled spoke windows that open up the face and add visual depth without overcomplicating the design. The gloss black finish covers the face and barrel, while the milled windows introduce a contrasting brightness along each spoke. A simulated beadlock ring circles the outer edge, giving the wheel the aggressive, trail-ready character Weld Off-Road is known for without the added complexity of a functional locking ring. Lug hardware sits exposed on the face around the hub bore, visible in a circle at the center of the wheel. A center cap is included.\u003c\/p\u003e\u003cp\u003eRotary Forged Construction\u003c\/p\u003e\u003cp\u003eWeld Off-Road brings its racing-derived manufacturing discipline to the Cinch through rotary forging. The barrel is heated and spun under pressure, compressing and densifying the aluminum grain structure for a stronger, stiffer barrel than standard casting alone. That process is part of what lets Weld deliver a wheel at this size and weight that holds up to the demands of lifted truck and Jeep builds. At 37 lbs in a 20x9 one-piece form, the Cinch carries the structural integrity the platform needs.\u003c\/p\u003e\u003cp\u003eFitment Details\u003c\/p\u003e\u003cp\u003eAt 20 inches in diameter and 9 inches wide with a 0mm offset, the Cinch sits centered in the fender with the mounting surface at the wheel's midpoint. This geometry works across stock, leveled, and lifted setups on the 5x127 platforms listed above. The 0mm offset keeps the wheel face and inner barrel in equal balance, a neutral stance that suits a wide range of tire and lift combinations on Wrangler and Grand Cherokee builds. The Cinch is also offered in additional sizes, widths, and finishes across the lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eGloss Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eRotary Forged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e37 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Weld Off-Road","offers":[{"title":"Default Title","offer_id":68713220309273,"sku":"W10509057501","price":440.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/cinch_glossblack_white__64392.jpg?v=1794773538"},{"product_id":"24x12-black-wheel-vektor-xt-5x4-5-51-85b2-24254-518n","title":"Vektor XT Black | 24x12 | 5x4.5 -51mm Offset | 85B2-24254-518N","description":"\u003cp\u003eForged One-Piece Construction at 24 Inches\u003c\/p\u003e\u003cp\u003eThe Weld Off-Road Vektor XT is built on the same forged aluminum foundation that made Weld Racing a name in motorsport, brought to the off-road truck space in a 24x12 format. One-piece forged construction means the wheel is shaped from a single billet of aluminum under extreme pressure, refining the grain structure throughout the barrel and face for a stronger, denser result than casting alone can achieve. At 57.38 lbs, the Vektor XT carries the weight you'd expect from a forged 24-inch wheel at 12 inches wide. The 2,600-lb load rating supports full-size truck and SUV applications, and backspacing comes in at 4.49 inches.\u003c\/p\u003e\u003cp\u003eSplit Eight-Spoke Face with Milled Windows\u003c\/p\u003e\u003cp\u003eThe Vektor XT runs a split eight-spoke layout with milled spoke windows cut into each spoke. The milling opens up the face between the split sections, creating contrast between the gloss black surfaces and the brighter milled aluminum exposed in each window. Lug hardware sits exposed around the hub bore, visible on the face in a circle at the center of the wheel. A center cap is included and covers the hub area when installed. The outer lip adds depth to the profile on this 24-inch diameter wheel, which carries the visual presence you'd expect from a show-scale build.\u003c\/p\u003e\u003cp\u003eOffset and Stance at -51mm\u003c\/p\u003e\u003cp\u003eA -51mm offset places the mounting surface well rearward of the wheel's centerline, pushing the face and barrel outboard from the hub. On a 12-inch-wide wheel, that combination puts the Vektor XT firmly in aggressive-fitment territory, with the face sitting noticeably outside the fender plane on most applications. The 73mm hub bore fits 5x114.3 (5x4.5) platforms across the verified fitment range.\u003c\/p\u003e\u003cp\u003eFitment Across 5x114.3 Platforms\u003c\/p\u003e\u003cp\u003eThe 5x114.3 (5x4.5) bolt pattern covers a wide range of trucks and SUVs. Verified fitment includes the Toyota Tacoma (1995-2015), Ford Ranger (1983-2011), Jeep Cherokee (1974-2001), Jeep Wrangler (1987-2006), and Toyota Pickup (1970-1995), with 10 additional verified platforms in the fitment universe of 162 total applications. The Vektor XT is also offered in additional sizes and configurations across the lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x114.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-51 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.49\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e73 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eForged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e57.38 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Weld Off-Road","offers":[{"title":"Default Title","offer_id":68713220374809,"sku":"85B2-24254-518N","price":1290.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/vektorxt_black_white__87973.jpg?v=1794773539"},{"product_id":"17x9-satin-black-wheel-ledge-6-w108-6x5-5-12-w10879084450","title":"Ledge 6 W108 Satin Black | 17x9 | 6x5.5 -12mm Offset | W10879084450","description":"\u003cp\u003eBuilt for the 6x139.7 Platform\u003c\/p\u003e\u003cp\u003eThe Weld Off-Road Ledge 6 lands squarely in the 6x139.7 (6x5.5) bolt pattern universe, covering Chevrolet Silverado 1500 (1999-2026), GMC Sierra 1500 (2000-2026), Toyota Tacoma (1995-2026), Toyota Tundra (2000-2026), and Chevrolet K1500 (1988-1999), with 10 additional verified platforms beyond those five. The 106.10mm hub bore fits these applications. At 17x9 with a -12mm offset, the mounting surface sits rearward of centerline, pushing the wheel outward for a more aggressive stance than stock. Backspacing measures 4.53 inches.\u003c\/p\u003e\u003cp\u003eSplit Six-Spoke Design with Simulated Beadlock\u003c\/p\u003e\u003cp\u003eThe Ledge 6 carries Weld Off-Road's signature look: six split spokes radiate from the hub in a concave profile, giving the face visual depth and a purposeful, off-road-ready character. The simulated beadlock ring wraps the outer edge, delivering the rugged aesthetic of a beadlock-equipped wheel without the added weight or maintenance of a functional ring. Exposed lug hardware sits in a circle around the hub bore, visible on the face and adding to the wheel's mechanical, no-nonsense appearance. A center cap is included. The satin black finish ties the whole design together with a low-glare, matte-adjacent surface that holds its look through trail dust and road film alike.\u003c\/p\u003e\u003cp\u003eRotary Forged Construction\u003c\/p\u003e\u003cp\u003eWeld's drag racing roots run through everything the brand builds, and the Ledge 6 reflects that manufacturing discipline. The barrel is heated and spun under pressure, compressing and densifying the aluminum grain structure through the barrel wall. That process produces a stronger, lighter barrel than standard casting alone, and it does so at a price point that makes the construction accessible for truck builds that demand real-world durability. One-piece construction keeps the wheel's geometry consistent from hub to lip, and the 26-lb weight sits comfortably within the range for this class.\u003c\/p\u003e\u003cp\u003eFitment Details\u003c\/p\u003e\u003cp\u003eThe Silverado 1500 and Sierra 1500 are the natural home for this wheel, and the Tacoma and Tundra fitment extends the Ledge 6's reach across both domestic and import full-size and mid-size truck platforms. The -12mm offset positions the wheel outboard of stock, which suits lifted builds where the wider wheel position fills the fender arch with intention. The Ledge 6 is also offered in additional sizes, finishes, and bolt patterns across the lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.53\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSatin Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eRotary Forged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e26 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Weld Off-Road","offers":[{"title":"Default Title","offer_id":68713220636953,"sku":"W10879084450","price":325.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/ledge6_satinblack_white__71959.jpg?v=1794773539"},{"product_id":"20x9-satin-black-wheel-cinch-w104-5x5-0-w10409057501","title":"Cinch W104 Satin Black | 20x9 | 5x5 0mm Offset | W10409057501","description":"\u003cp\u003eBuilt for Jeep and Truck Platforms\u003c\/p\u003e\u003cp\u003eJeep Wrangler owners (2007-2026) get a wheel sized and drilled for their platform right out of the box. The Weld Off-Road Cinch W104 also fits Jeep Grand Cherokee (1999-2026), Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), with 10 additional verified platforms rounding out the 5x127 (5x5) fitment universe. The 87.1mm hub bore fits these platforms, and the 0mm offset places the mounting surface exactly at the wheel's centerline, splitting the 9-inch barrel evenly between inboard and outboard. Backspacing comes in at 5 inches. At 20 inches in diameter, this is a wheel sized for trucks and Jeeps running lift kits where the extra diameter fills the arch with presence.\u003c\/p\u003e\u003cp\u003eSplit Seven-Spoke Design with Simulated Beadlock\u003c\/p\u003e\u003cp\u003eThe Cinch runs a split seven-spoke layout with gloss black windows and accents set against the satin black face, giving the design visual contrast without adding hardware. The simulated beadlock ring wraps the outer edge, delivering the rugged, trail-ready look of a beadlock wheel without the weight or complexity of a functional locking ring. Exposed lug hardware sits in a circle around the hub bore at the center of the face, keeping the mounting hardware visible as part of the design rather than hiding it behind a cap. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eRotary Forged One-Piece Construction\u003c\/p\u003e\u003cp\u003eWeld Off-Road brings its racing engineering background to the Cinch through rotary forging. The cast barrel is heated and spun under pressure, compressing and densifying the aluminum grain through the barrel wall for a stronger, stiffer structure than standard low-pressure casting alone. That process is a natural fit for Weld's off-road lineup, where the brand's drag racing roots translate into a demand for structural integrity under load. The one-piece construction keeps the wheel as a single continuous unit from hub to barrel. This wheel weighs 37 lbs.\u003c\/p\u003e\u003cp\u003eFinish Details\u003c\/p\u003e\u003cp\u003eThe satin black finish covers the face and spokes with a low-sheen surface that holds up to trail dust, brake film, and seasonal road exposure without demanding constant attention. Gloss black windows and accents add depth to the split-spoke design, and the simulated beadlock ring ties the whole look together with a purposeful off-road character that suits lifted Jeep and truck builds. The Cinch is also offered in additional sizes and configurations across the W104 lineup for builds with different fitment needs.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSatin Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eRotary Forged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e37 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Weld Off-Road","offers":[{"title":"Default Title","offer_id":68713220768025,"sku":"W10409057501","price":440.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/cinch_satinblack_white__55388.jpg?v=1794773540"},{"product_id":"24x12-brushed-wheel-vektor-xt-5x4-5-51-85d3-24254-517n","title":"Vektor XT Brushed | 24x12 | 5x4.5 -51mm Offset | 85D3-24254-517N","description":"\u003cp\u003eForged One-Piece Construction at 24 Inches\u003c\/p\u003e\u003cp\u003eThe Weld Off-Road Vektor XT is a one-piece forged wheel, and that process matters. Forging starts with a solid billet of aluminum that is pressed under extreme pressure to shape the wheel, aligning the grain structure of the metal throughout the piece rather than relying on a cast pour. The result is a denser, stronger wheel than casting alone produces. At 24 inches in diameter and 12 inches wide, this is a show-presence wheel with the structural integrity to back it up. The 2,600-lb load rating reflects that forged foundation.\u003c\/p\u003e\u003cp\u003eBrushed Finish with Tinted Clear Coat\u003c\/p\u003e\u003cp\u003eThe finish on the Vektor XT is brushed aluminum with a tinted clear coat applied over the surface. The brushed texture gives the face a directional grain that shifts in appearance depending on the angle and light, while the tinted clear coat adds depth and protects the aluminum from oxidation and road exposure. This is a finish that rewards a clean truck and holds its character over time without requiring the upkeep of a polished or chrome surface.\u003c\/p\u003e\u003cp\u003eSplit Eight-Spoke Face and Exposed Hardware\u003c\/p\u003e\u003cp\u003eThe Vektor XT runs a split eight-spoke design, with each spoke branching as it moves outward from the hub toward the outer barrel. The face carries exposed lug hardware, sitting in a circle around the hub bore where the wheel mounts to the vehicle. That hardware is visible and intentional, adding a machined, industrial character to the face. Rivets accent the design as well. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eOffset and Stance at -51mm\u003c\/p\u003e\u003cp\u003eAt -51mm offset, the mounting surface sits well rearward of the wheel's centerline, pushing the face and barrel outboard from the hub. On a 12-inch-wide wheel, that combination places the wheel significantly outside the stock track width, which is the kind of aggressive outboard positioning that suits builds running leveling kits or lift setups. The 4.49-inch backspacing and 73mm hub bore fit the 5x114.3 (5x4.5) bolt pattern platforms this wheel is drilled for.\u003c\/p\u003e\u003cp\u003eFitment Across 5x114.3 Platforms\u003c\/p\u003e\u003cp\u003eThe 5x114.3 (5x4.5) bolt pattern covers a wide range of truck and SUV applications. Verified fits include the Toyota Tacoma (1995-2015), Ford Ranger (1983-2011), Jeep Cherokee (1974-2001), Jeep Wrangler (1987-2006), and Toyota Pickup (1970-1995), with 10 additional verified platforms in the fitment universe. The Vektor XT is also offered in additional sizes, widths, and finishes across the lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x114.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-51 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.49\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e73 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBrushed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eForged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e57.38 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Weld Off-Road","offers":[{"title":"Default Title","offer_id":68713220702489,"sku":"85D3-24254-517N","price":1290.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/vektorxt_brushed_white__83091.jpg?v=1794773539"},{"product_id":"17x9-bronze-black-wheel-ledge-6-w106-6x5-5-0-w10679084500","title":"Ledge 6 W106 Bronze Black | 17x9 | 6x5.5 0mm Offset | W10679084500","description":"\u003cp\u003eBuilt on Weld's Racing Heritage\u003c\/p\u003e\u003cp\u003eThe Weld Off-Road Ledge 6 W106 carries the engineering DNA of Weld Racing into the off-road truck space. The split six-spoke layout pairs a concave face with a satin bronze finish and a black simulated beadlock ring, giving the wheel a layered, purposeful look that suits lifted truck builds. At 17x9 with a 0mm offset, the mounting surface sits exactly at the wheel's centerline, placing the barrel evenly between the hub face and the outer edge. The 106.1mm hub bore fits the 6x139.7 (6x5.5) bolt pattern platforms this wheel was built for.\u003c\/p\u003e\u003cp\u003eSatin Bronze Finish and Simulated Beadlock Detail\u003c\/p\u003e\u003cp\u003eThe finish is satin bronze across the face and spokes, with the simulated beadlock ring finished in black for a two-tone contrast that frames the outer edge. The six split spokes carry a concave profile, adding visual depth to the face without overcomplicating the design. Lug hardware sits exposed around the hub bore, visible on the face as part of the wheel's overall look. A center cap is included and covers the hub area when installed. The outer lip is present and contributes to the wheel's overall depth from face to barrel.\u003c\/p\u003e\u003cp\u003eRotary Forged One-Piece Construction\u003c\/p\u003e\u003cp\u003eWeld builds the Ledge 6 as a one-piece rotary forged wheel. The process starts with a cast blank that is then heated and spun under pressure, compressing and densifying the aluminum grain through the barrel for a stronger, stiffer structure than standard casting alone. The result is a wheel that holds up to the demands of lifted truck use at a weight of 26 lbs per wheel. One-piece construction keeps the design clean and structurally continuous from hub to barrel.\u003c\/p\u003e\u003cp\u003eFitment Across the 6x139.7 Platform\u003c\/p\u003e\u003cp\u003eThe Chevrolet Silverado 1500 (1999-2026) and GMC Sierra 1500 (2000-2026) are natural homes for this wheel, along with the Toyota Tacoma (1995-2026), Toyota Tundra (2000-2026), and Chevrolet K1500 (1988-1999). The 6x139.7 (6x5.5) bolt pattern covers 114 verified fits in total, with 10 additional verified platforms beyond those listed here. At 0mm offset with 5 inches of backspacing, this wheel positions the barrel symmetrically around the hub centerline, working well across stock, leveled, and lifted setups on these platforms.\u003c\/p\u003e\u003cp\u003eAdditional Configurations Available\u003c\/p\u003e\u003cp\u003eThe Ledge 6 is offered across additional sizes, finishes, and bolt patterns beyond this specific setup, so there are options to match different build directions within the lineup.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBronze Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eRotary Forged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e26 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Weld Off-Road","offers":[{"title":"Default Title","offer_id":68713221161241,"sku":"W10679084500","price":325.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/ledge6_bronzeblack_white__57762.jpg?v=1794773541"},{"product_id":"24x12-polished-wheel-vektor-xt-5x4-5-51-85a1-24254-510n","title":"Vektor XT Polished | 24x12 | 5x4.5 -51mm Offset | 85A1-24254-510N","description":"\u003cp\u003eForged One-Piece Construction at 24 Inches\u003c\/p\u003e\u003cp\u003eThe Weld Off-Road Vektor XT is a one-piece forged wheel, and that process matters at this size. A single billet of aluminum is pressed and shaped under high force, aligning the grain structure throughout the wheel rather than relying on a cast pour. The result is a wheel that carries a 2,600-lb load rating in a 24x12 package that weighs 57.38 lbs, consistent with what forged construction delivers at this diameter and width. Weld's drag racing engineering heritage carries directly into this off-road line, and the Vektor XT reflects that background in how the wheel is built rather than just how it looks.\u003c\/p\u003e\u003cp\u003eSplit Eight-Spoke Face With Exposed Lugs\u003c\/p\u003e\u003cp\u003eThe Vektor XT runs a split eight-spoke face, with each spoke dividing as it moves outward from the hub. The lug hardware sits exposed in a circle around the hub bore at the center of the face, visible and part of the wheel's overall look rather than hidden behind a cap. A center cap is included with this wheel. The polished finish covers the entire wheel, giving the face, spokes, and barrel a bright, reflective surface that suits the scale of a 24-inch diameter. Backspacing measures 4.49 inches.\u003c\/p\u003e\u003cp\u003eOffset and Stance at -51mm\u003c\/p\u003e\u003cp\u003eAt -51mm, the mounting surface sits well rearward of the wheel's centerline, pushing the face and barrel outboard from the hub. On a 12-inch-wide wheel, that combination positions the wheel significantly outside the factory track width. This is an aggressive outboard stance, and it suits builds where presence and visual width are the priority. The 73mm hub bore fits 5x114.3 (5x4.5) platforms across the verified fitment range.\u003c\/p\u003e\u003cp\u003eFitment Across 5x114.3 (5x4.5) Platforms\u003c\/p\u003e\u003cp\u003eThe Vektor XT in this size fits Toyota Tacoma (1995-2015), Ford Ranger (1983-2011), Jeep Cherokee (1974-2001), Jeep Wrangler (1987-2006), and Toyota Pickup (1970-1995), with 10 additional verified platforms beyond those five, covering 162 total fitments across the 5x114.3 (5x4.5) universe. The Vektor XT is also offered in additional sizes, widths, and finishes across the lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x114.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-51 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.49\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e73 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePolished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eForged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e57.38 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Weld Off-Road","offers":[{"title":"Default Title","offer_id":68713221128473,"sku":"85A1-24254-510N","price":1290.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/vektorxt_polished_white__13568.jpg?v=1794773540"},{"product_id":"20x10-gloss-black-wheel-cinch-w105-5x5-5x5-5-18-w10500057476","title":"Cinch W105 Gloss Black | 20x10 | 5x5\/5x5.5 -18mm Offset | W10500057476","description":"\u003cp\u003eDual-Pattern Fitment for Jeep and Classic Truck Platforms\u003c\/p\u003e\u003cp\u003eThe Weld Off-Road Cinch W105 is a 20x10 wheel drilled for two distinct bolt patterns: 5x127 (5x5) and 5x139.7 (5x5.5). The 5x127 pattern covers Jeep Wrangler (2007-2026), Jeep Grand Cherokee (1999-2026), and older Chevy half-ton platforms including the Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999). The 5x139.7 pattern opens fitment to older Ford F-150 and Bronco applications, pre-2002 Dodge Ram 1500, Jeep Wagoneer and Cherokee XJ, and similar classic 5-lug truck platforms. In total, the Cinch covers 32 verified fitment applications across both patterns. The 87.1mm hub bore fits these platforms, and the 2,500-lb load rating supports the demands of lifted truck and Jeep builds.\u003c\/p\u003e\u003cp\u003eSplit Seven-Spoke Design with Milled Detail\u003c\/p\u003e\u003cp\u003eThe Cinch carries a split seven-spoke layout with milled spoke windows and milled accents that open up the face and add visual contrast against the gloss black finish. The simulated beadlock ring runs the outer circumference, giving the wheel the rugged, trail-ready character Weld Off-Road is known for without the weight penalty of a functional beadlock setup. Lug hardware sits exposed on the face around the hub area, visible and intentional as part of the overall design. The outer lip adds depth to the profile, and the 4.79 inches of backspacing positions the mounting surface to work with lifted setups where clearance and stance both matter.\u003c\/p\u003e\u003cp\u003eRotary Forged Construction\u003c\/p\u003e\u003cp\u003eWeld Off-Road brings its racing engineering heritage to the Cinch through rotary forging. The barrel is heated and spun under pressure, compressing and densifying the aluminum grain structure for a stronger, stiffer barrel than standard casting delivers. That process is a natural fit for a wheel built around Weld's performance roots: the Cinch carries the structural integrity the brand's drag racing background demands, translated into a design built for off-road truck and Jeep applications. At 37 lbs, the wheel sits within the expected range for this size and construction.\u003c\/p\u003e\u003cp\u003eOffset and Stance at -18mm\u003c\/p\u003e\u003cp\u003eAt -18mm offset on a 10-inch barrel, the Cinch's mounting surface sits rearward of the wheel's centerline, pushing the face outward for a wider, more aggressive stance than stock positioning. This combination of 10-inch width and -18mm offset qualifies as a genuinely wide fitment, with the outboard wheel position and poke that lifted Jeep and truck builds are built around. The Cinch is also offered in additional sizes, widths, and finishes across the lineup for builds with different fitment targets.\u003c\/p\u003e\u003cp\u003eCenter Cap Included\u003c\/p\u003e\u003cp\u003eA center cap is included with this wheel, covering the hub hardware for a finished look on the street or at the show.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127 \/ 5x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-18 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.79\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eGloss Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eRotary Forged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2500 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e37 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Weld Off-Road","offers":[{"title":"Default Title","offer_id":68713221226777,"sku":"W10500057476","price":455.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/cinch_glossblack_white__14776.jpg?v=1794773541"},{"product_id":"24x14-black-wheel-vektor-xt-5x4-5-76-85b2-24454-768n","title":"Vektor XT Black | 24x14 | 5x4.5 -76mm Offset | 85B2-24454-768N","description":"\u003cp\u003eForged One-Piece Construction at 24 Inches\u003c\/p\u003e\u003cp\u003eThe Weld Off-Road Vektor XT is a one-piece forged wheel, and that process matters at this size. Forging starts with a solid billet of aluminum that is pressed under extreme pressure into shape, aligning the grain structure of the metal throughout the wheel rather than leaving the random crystalline pattern of a cast piece. The result is a wheel that handles the stresses of truck use at a 24-inch diameter without the added mass that casting typically requires at this scale. At 59.38 lbs, the Vektor XT sits in the expected range for a forged 24-inch wheel at 14 inches wide.\u003c\/p\u003e\u003cp\u003eGloss Black with Milled Spoke Windows\u003c\/p\u003e\u003cp\u003eThe finish is Gloss Black with milled spoke windows, a two-texture approach that works the contrast between the deep gloss black surfaces and the bright aluminum revealed by the milling process. Each of the eight split spokes carries a milled window that opens up the face and introduces a machined brightness against the surrounding gloss. The exposed lug hardware sits in a circle around the hub bore at the center of the face, visible and intentional rather than hidden behind a cap. A center cap is included with this wheel. Backspacing measures 4.51 inches.\u003c\/p\u003e\u003cp\u003eAggressive Offset for a Wide Track\u003c\/p\u003e\u003cp\u003eAt -76mm, the Vektor XT's mounting surface sits well rearward of the wheel's centerline, pushing the face and barrel outboard from the hub. Combined with the 14-inch width, this is a genuinely aggressive outboard position that commits the build to a wide track and significant poke beyond the fender line. This offset is built for trucks running lift kits where fender clearance has been opened up to accommodate the extra width and outboard positioning.\u003c\/p\u003e\u003cp\u003eFitment Across 5x114.3 (5x4.5) Platforms\u003c\/p\u003e\u003cp\u003eThe 5x114.3 (5x4.5) bolt pattern and 73mm hub bore cover a wide range of truck and SUV platforms. Verified fitment includes the Toyota Tacoma (1995-2015), Ford Ranger (1983-2011), Jeep Cherokee (1974-2001), Jeep Wrangler (1987-2006), and Toyota Pickup (1970-1995), with 10 additional verified platforms in the fitment universe of 162 total applications. The Vektor XT is also offered in additional sizes, widths, and finishes across the lineup to suit different builds and bolt-pattern needs.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x114.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-76 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.51\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e73 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eForged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e59.38 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Weld Off-Road","offers":[{"title":"Default Title","offer_id":68713221521689,"sku":"85B2-24454-768N","price":1340.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/vektorxt_black_white__53162.jpg?v=1794773541"},{"product_id":"17x9-gray-black-wheel-ledge-6-w107-6x5-5-0-w10779084500","title":"Ledge 6 W107 Gray Black | 17x9 | 6x5.5 0mm Offset | W10779084500","description":"\u003cp\u003eBuilt on the 6x139.7 (6x5.5) Platform\u003c\/p\u003e\u003cp\u003eThe Silverado 1500, Sierra 1500, Toyota Tacoma, Toyota Tundra, and Chevrolet K1500 are the anchor platforms for the Weld Off-Road Ledge 6 W107, and the 6x139.7 (6x5.5) bolt pattern opens this wheel to 10 additional verified fits beyond those five. The 106.10mm hub bore fits these GM and Toyota full-size and mid-size truck platforms. At 17x9 with a 0mm offset, the mounting surface sits exactly at the wheel's centerline, placing the barrel evenly split between inboard and outboard. That centered position works across stock, leveled, and lifted setups without pushing the wheel aggressively outward or tucking it inward.\u003c\/p\u003e\u003cp\u003eSplit Six-Spoke Design with Simulated Beadlock\u003c\/p\u003e\u003cp\u003eThe Ledge 6 carries a split six-spoke face with a concave profile that draws the spokes back from the outer edge, giving the wheel visual depth. The exposed lug hardware sits in a circle around the hub bore at the center of the face, adding an intentional, hardware-forward look that suits the off-road character of the wheel. The simulated beadlock ring runs the outer circumference in black, contrasting against the Satin Gunmetal Gray finish across the face and spokes. That ring is cosmetic, delivering the rugged beadlock aesthetic without the weight or complexity of a functional locking ring. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eRotary Forged One-Piece Construction\u003c\/p\u003e\u003cp\u003eWeld Off-Road brings its racing-derived manufacturing discipline to the Ledge 6 through rotary forging. The barrel is heated and spun under pressure, compressing and densifying the aluminum grain through the barrel wall for a stronger, stiffer structure than standard casting alone. That process is part of what lets Weld Off-Road hold the tolerances and structural integrity their off-road truck lineup demands. The one-piece construction keeps the wheel as a single continuous unit from hub to barrel, and the 26-lb weight reflects the efficiency of the rotary forged process.\u003c\/p\u003e\u003cp\u003eFinish and Backspacing Details\u003c\/p\u003e\u003cp\u003eThe Satin Gunmetal Gray finish gives the face a muted, low-sheen tone that holds up against trail grime and road film without demanding constant attention. The black simulated beadlock ring provides a sharp contrast at the outer edge. Backspacing on this wheel is 5 inches, with the mounting surface centered in the barrel. The Ledge 6 is also offered in additional sizes, finishes, and bolt patterns across the lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eGray Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eRotary Forged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e26 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Weld Off-Road","offers":[{"title":"Default Title","offer_id":68713221554457,"sku":"W10779084500","price":325.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/ledge6_grayblack_white__98112.jpg?v=1794773541"},{"product_id":"20x10-satin-black-wheel-cinch-w104-5x5-5x5-5-18-w10400057476","title":"Cinch W104 Satin Black | 20x10 | 5x5\/5x5.5 -18mm Offset | W10400057476","description":"\u003cp\u003eJeep and Classic Truck Fitment Across Two Bolt Patterns\u003c\/p\u003e\u003cp\u003eThe Weld Off-Road Cinch W104 is a dual-drilled 20x10 wheel covering both the 5x127 (5x5) and 5x139.7 (5x5.5) bolt patterns, opening fitment to a wide range of platforms. The 5x127 pattern fits Jeep Wrangler (2007-2026), Jeep Grand Cherokee (1999-2026), and older GM half-ton platforms including the Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999). The 5x139.7 pattern extends coverage to older Ford F-150 and Bronco applications, pre-2002 Dodge Ram 1500, Jeep Wagoneer and Cherokee XJ, and similar classic 5-lug truck platforms. Across both patterns, the Cinch covers 32 verified fitment applications. The 87.10mm hub bore fits these platforms, and the 2,500-lb load rating supports real-world truck and SUV use.\u003c\/p\u003e\u003cp\u003eSplit Seven-Spoke Design with Simulated Beadlock\u003c\/p\u003e\u003cp\u003eThe Cinch carries a split seven-spoke face with gloss black windows and accents set against the satin black finish, giving the wheel visual contrast and depth without relying on machined or milled surfaces. The simulated beadlock ring runs the outer circumference, delivering the aggressive off-road aesthetic of a beadlock-style wheel. Exposed lug hardware sits in a circle around the hub bore, visible on the face and adding to the purposeful, hardware-forward look. The outer lip adds profile depth to the overall stance. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eRotary Forged Construction\u003c\/p\u003e\u003cp\u003eWeld Off-Road brings its racing-derived manufacturing approach to the Cinch through rotary forging. The barrel is heated and spun under pressure, compressing and densifying the aluminum grain structure for a stronger barrel than standard casting alone. That process is a natural fit for a wheel built to carry Jeeps and full-size trucks through demanding use, and it reflects Weld's commitment to building off-road wheels with the same engineering discipline behind their drag racing lineup. At 37 lbs, the Cinch sits within the expected range for a 20x10 rotary forged wheel of this design.\u003c\/p\u003e\u003cp\u003eOffset and Stance Details\u003c\/p\u003e\u003cp\u003eAt -18mm offset, the mounting surface sits rearward of the wheel's centerline, pushing the wheel outward for a more aggressive stance than stock positioning. On a 10-inch-wide barrel, that combination qualifies as a genuinely wide, outboard fitment: the wheel will poke beyond the fender line on most builds, and a lift kit will open up the clearance to run this size cleanly. Backspacing measures 4.79 inches. The Cinch is also offered in additional sizes, widths, and finishes across the W104 lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127 \/ 5x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-18 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.79\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSatin Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eRotary Forged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2500 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e37 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Weld Off-Road","offers":[{"title":"Default Title","offer_id":68713221619993,"sku":"W10400057476","price":455.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/cinch_satinblack_white__01054.jpg?v=1794773542"},{"product_id":"24x14-brushed-wheel-vektor-xt-5x4-5-76-85d3-24454-767n","title":"Vektor XT Brushed | 24x14 | 5x4.5 -76mm Offset | 85D3-24454-767N","description":"\u003cp\u003eForged One-Piece Construction at 24 Inches\u003c\/p\u003e\u003cp\u003eThe Weld Off-Road Vektor XT is a one-piece forged wheel, and that process matters. Rather than casting molten aluminum into a mold, forging compresses and shapes solid aluminum billet under extreme pressure, aligning the grain structure throughout the wheel for a denser, stronger result. At 24 inches in diameter and 14 inches wide, this is a show-presence wheel built on Weld Racing's engineering heritage, carrying that drag-strip precision into the off-road truck space. The 2,600-lb load rating reflects the structural integrity that forging delivers at this scale.\u003c\/p\u003e\u003cp\u003eBrushed Finish with Tinted Clear Coat\u003c\/p\u003e\u003cp\u003eThe finish is a brushed aluminum surface protected by a tinted clear coat. The brushing process draws fine, consistent lines across the aluminum, giving the face a satin-metallic character that differs from both polished and painted surfaces. The tinted clear coat deepens the tone slightly while shielding the brushed texture from oxidation and road exposure. It's a finish that suits builds where the wheel is meant to be noticed without relying on chrome or gloss paint to do the work.\u003c\/p\u003e\u003cp\u003eSplit Eight-Spoke Face with Exposed Lugs and Rivets\u003c\/p\u003e\u003cp\u003eThe Vektor XT runs a split eight-spoke design: each of the eight spokes divides as it moves outward from the hub, creating a layered, open design with visual depth. Lug hardware sits exposed in a circle around the hub bore, visible on the face rather than hidden behind a cap. Rivets accent the wheel as well, adding a detail element consistent with Weld Off-Road's off-road truck aesthetic. A center cap is included. Backspacing measures 4.51 inches.\u003c\/p\u003e\u003cp\u003eOffset and Stance at -76mm\u003c\/p\u003e\u003cp\u003eAt -76mm, this is one of the most aggressive offsets available in a production forged wheel. The mounting surface sits far rearward of the wheel's centerline, pushing the face and barrel significantly outboard of the hub. On a 14-inch-wide wheel at this diameter, that offset produces substantial outboard positioning: the wheel face will sit well outside the fender plane on most platforms, making this a fitment choice for builds specifically built around maximum stance width. This is not a subtle adjustment from stock; it's a deliberate commitment to an outboard-heavy fitment.\u003c\/p\u003e\u003cp\u003eFitment for 5x114.3 (5x4.5) Platforms\u003c\/p\u003e\u003cp\u003eThe 73mm hub bore and 5x114.3 (5x4.5) bolt pattern cover a wide range of truck and SUV platforms. Verified fits include the Toyota Tacoma (1995-2015), Ford Ranger (1983-2011), Jeep Cherokee (1974-2001), Jeep Wrangler (1987-2006), and Toyota Pickup (1970-1995), with 10 additional verified platforms in the fitment universe. The Vektor XT is also offered in additional sizes, widths, and finishes across the lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x114.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-76 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.51\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e73 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBrushed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eForged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e59.38 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Weld Off-Road","offers":[{"title":"Default Title","offer_id":68713222013209,"sku":"85D3-24454-767N","price":1340.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/vektorxt_brushed_white__76565.jpg?v=1794773546"},{"product_id":"17x9-red-black-wheel-ledge-6-w134-6x5-5-0-w13479084500","title":"Ledge 6 W134 Red Black | 17x9 | 6x5.5 0mm Offset | W13479084500","description":"\u003cp\u003eBuilt on a 6x139.7 Platform\u003c\/p\u003e\u003cp\u003eThe Silverado 1500, Sierra 1500, Toyota Tacoma, and Toyota Tundra are the core of the 6x139.7 (6x5.5) universe, and the Weld Off-Road Ledge 6 W134 was made for exactly these platforms. Chevrolet K1500 owners (1988-1999) are covered as well, and the wheel spans 114 verified fits in total across 10 additional platforms beyond those named here. The 106.10mm hub bore fits these GM and Toyota applications, and the 5-inch backspacing at 0mm offset places the mounting surface at the wheel's centerline for a balanced, symmetrical stance.\u003c\/p\u003e\u003cp\u003eRotary Forged Construction\u003c\/p\u003e\u003cp\u003eWeld Off-Road brings its racing-derived manufacturing discipline to this wheel through rotary forging. The cast barrel is heated and spun under pressure, compressing and densifying the aluminum grain structure through the barrel wall. That process produces a stronger, stiffer barrel than standard casting alone, and it does so at a weight that makes sense for a 17x9 truck wheel. At 26 lbs, the Ledge 6 sits comfortably within the expected range for this class. One-piece construction keeps the wheel as a single continuous unit from hub to barrel, with no seams or hardware to manage over time.\u003c\/p\u003e\u003cp\u003eSplit Six-Spoke Design with Simulated Beadlock\u003c\/p\u003e\u003cp\u003eThe Ledge 6 runs a split six-spoke layout with a concave face, giving the wheel visual depth and a profile that suits lifted truck builds. Six split spokes radiate outward from the hub, and the exposed lug hardware sits in a circle around the hub bore at the center of the face, visible and intentional rather than hidden behind a cap. The gloss black simulated beadlock ring wraps the outer edge, adding a rugged, off-road-ready look that complements the Candy Red finish across the face. The outer lip is present and visible, framing the concave profile. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eFitment Details\u003c\/p\u003e\u003cp\u003eAt 17x9 with a 0mm offset, the Ledge 6 positions the wheel face flush with the centerline of the hub, a neutral stance that works across stock, leveled, and lifted setups on these 6x139.7 platforms. Silverado 1500 and Sierra 1500 owners running a lift kit will find this offset works well with the wider track those builds typically run. Tacoma and Tundra builds get the same balanced positioning. The Ledge 6 is also offered in additional sizes, widths, and finishes across the lineup for builds that need a different fit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eRed Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eRotary Forged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e26 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Weld Off-Road","offers":[{"title":"Default Title","offer_id":68713221947673,"sku":"W13479084500","price":370.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/ledge6_redblack_white__55385.jpg?v=1794773543"},{"product_id":"22x10-satin-bronze-wheel-cinch-w115-5x5-5x5-5-18-w11520057475","title":"Cinch W115 Satin Bronze | 22x10 | 5x5\/5x5.5 -18mm Offset | W11520057475","description":"\u003cp\u003eDual-Drilled for Jeep and Classic Truck Platforms\u003c\/p\u003e\u003cp\u003eJeep Wrangler owners (2007-2026) and Grand Cherokee builds (1999-2026) are the natural home for the Weld Off-Road Cinch W115, and the dual-drilled 5x127 (5x5) and 5x139.7 (5x5.5) bolt patterns extend that reach to classic GM platforms including the Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), among 15 total verified fits. The 87.1mm hub bore fits these platforms, and the 2,600-lb load rating supports the demands of full-size Jeep and truck builds.\u003c\/p\u003e\u003cp\u003eSplit Seven-Spoke Design with Simulated Beadlock\u003c\/p\u003e\u003cp\u003eThe Cinch runs a split seven-spoke face with a satin bronze finish and a satin black simulated beadlock ring that traces the outer edge of the wheel. The contrast between the warm bronze spokes and the blacked-out ring gives the face a layered, purposeful look that suits lifted Jeep and truck builds. Exposed lug hardware sits in a circle around the hub bore, visible on the face and adding to the tactical character of the design. A center cap is included. The outer lip adds further depth to the profile, and the non-directional pattern works on any corner of the vehicle.\u003c\/p\u003e\u003cp\u003eRotary Forged Construction\u003c\/p\u003e\u003cp\u003eWeld Off-Road brings its racing-derived manufacturing discipline to the Cinch through rotary forging: the barrel is heated and spun under pressure, compressing and densifying the aluminum grain structure for a stronger, stiffer barrel than standard casting alone. That process is part of what Weld has built its reputation on, and it carries through to the off-road lineup. At 45 lbs for a 22-inch wheel, the construction delivers the structural integrity this size and application demand. Backspacing measures 4.79 inches.\u003c\/p\u003e\u003cp\u003eOffset and Stance at 22x10\u003c\/p\u003e\u003cp\u003eAt -18mm, the mounting surface sits rearward of the wheel's centerline, pushing the wheel outward for a wider, more aggressive stance than stock positioning. On a 10-inch-wide, 22-inch-diameter wheel, that outboard positioning is a deliberate fitment choice for builds that want presence and width. The Cinch is also offered in additional sizes, widths, and finishes across the lineup for builds with different fitment targets.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e5x127 \/ 5x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-18 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.79\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e87.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSatin Bronze\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eRotary Forged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e45 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Weld Off-Road","offers":[{"title":"Default Title","offer_id":68713222144281,"sku":"W11520057475","price":540.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/cinch_satinbronze_white__40373.jpg?v=1794773543"},{"product_id":"17x9-satin-black-wheel-ledge-6-w108-6x5-5-0-w10879084500","title":"Ledge 6 W108 Satin Black | 17x9 | 6x5.5 0mm Offset | W10879084500","description":"\u003cp\u003eBuilt on Weld's Racing Heritage\u003c\/p\u003e\u003cp\u003eThe Weld Off-Road Ledge 6 brings the engineering discipline of Weld Racing's drag-strip roots into the off-road truck space. This 17x9 wheel arrives in a satin black finish with a simulated beadlock ring, giving it the rugged, purpose-built look that suits lifted truck builds without the complexity of a functional beadlock setup. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eSplit Six-Spoke Design with Exposed Lugs\u003c\/p\u003e\u003cp\u003eThe Ledge 6 runs a split six-spoke layout with a concave face profile, giving the design visual depth and a forward-leaning stance. Lug hardware sits exposed around the hub bore at the center of the face, adding to the utilitarian, no-nonsense character of the wheel. The simulated beadlock ring wraps the outer edge, reinforcing the off-road aesthetic with a detail that mirrors functional beadlock designs used in serious trail applications.\u003c\/p\u003e\u003cp\u003eRotary Forged One-Piece Construction\u003c\/p\u003e\u003cp\u003eWeld builds the Ledge 6 as a one-piece rotary forged wheel, a process that heats the cast barrel and spins it under pressure, compressing and densifying the aluminum grain through the barrel section. The result is a stronger, stiffer barrel than standard casting delivers, at a weight that reflects the construction's efficiency. At 26 lbs, this wheel carries the structural integrity the process is known for. The one-piece build keeps the design clean and the construction consistent from hub to lip.\u003c\/p\u003e\u003cp\u003eFitment Across the 6x139.7 Platform\u003c\/p\u003e\u003cp\u003eChevrolet Silverado 1500 and GMC Sierra 1500 owners running this 6x139.7 (6x5.5) bolt pattern are the natural home for the Ledge 6, with verified fitment spanning the 1999-2026 Silverado 1500 and 2000-2026 Sierra 1500. Toyota Tacoma (1995-2026) and Tundra (2000-2026) owners share the same bolt pattern, and the Chevrolet K1500 (1988-1999) rounds out the primary verified platforms. The 106.10mm hub bore fits these 6x139.7 applications, and the 5-inch backspacing pairs with the 0mm offset, placing the mounting surface at the wheel's centerline for a balanced, symmetrical position relative to the hub. Fitment spans 114 verified applications across the 6x139.7 universe, including 10 additional platforms beyond those named here.\u003c\/p\u003e\u003cp\u003eSize and Offset Details\u003c\/p\u003e\u003cp\u003eAt 17 inches in diameter and 9 inches wide with a 0mm offset, the Ledge 6 sits the mounting surface exactly at centerline. This is a truck-scaled combination that works across stock, leveled, and lifted setups on the platforms this wheel fits. The Ledge 6 is also offered in additional sizes, widths, and finishes across the lineup for builds with different fitment targets.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSatin Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eRotary Forged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e26 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Weld Off-Road","offers":[{"title":"Default Title","offer_id":68713222340889,"sku":"W10879084500","price":325.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/ledge6_satinblack_white__47436.jpg?v=1794773543"},{"product_id":"17x9-gloss-black-wheel-cinch-6x135-6x5-5-12-w10579098450","title":"Cinch Gloss Black | 17x9 | 6x135\/6x5.5 -12mm Offset | W10579098450","description":"\u003cp\u003eFord and GM Truck Fitment in One Wheel\u003c\/p\u003e\u003cp\u003eThe Weld Off-Road Cinch is a dual-drilled 17x9 wheel covering both the 6x135 and 6x139.7 (6x5.5) bolt patterns, making it a strong fit for Ford F-150, Expedition, Navigator, F-150 Lightning, and Bronco owners, along with Chevy Silverado 1500, GMC Sierra 1500, Tahoe, Suburban, Yukon, and similar 6x139.7 platforms. The 106.10mm hub bore fits these platforms, and the 2,200-lb load rating supports real-world truck use. One wheel covers both bolt-pattern groups, which is a genuine advantage when you want a consistent look across a mixed-platform fleet or are building a truck that sits between the two ecosystems.\u003c\/p\u003e\u003cp\u003eSplit Seven-Spoke Design with Milled Detail\u003c\/p\u003e\u003cp\u003eThe Cinch runs a split seven-spoke layout with milled spoke windows and accents that open up the face and add contrast against the gloss black finish. The simulated beadlock ring around the outer edge brings Weld Off-Road's signature off-road aesthetic to the design without the added complexity of a functional beadlock. Rivets accent the beadlock ring, and the exposed lug hardware sits in a circle around the hub bore, visible on the face and adding to the purposeful, off-road-ready look. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eRotary Forged Construction\u003c\/p\u003e\u003cp\u003eWeld Off-Road brings its racing engineering heritage to the Cinch through rotary forging. The barrel is heated and spun under pressure, compressing and densifying the aluminum grain structure for a stronger, stiffer barrel than standard casting delivers. At 26 lbs, the Cinch lands right at the typical weight for a rotary forged 17-inch truck wheel, reflecting the efficiency the process is known for. The one-piece construction keeps the design clean and structurally unified from hub to barrel.\u003c\/p\u003e\u003cp\u003eOffset and Stance Details\u003c\/p\u003e\u003cp\u003eAt -12mm offset on a 9-inch-wide wheel, the mounting surface sits rearward of the wheel's centerline, pushing the face outward relative to stock positioning. The 4.53 inches of backspacing positions the wheel appropriately for trucks running leveling kits or modest lift kits, where the outboard placement fills the fender arch with a planted, intentional stance. Verified fitment covers Ford F-150 (2004???2026), Expedition (2003???2027), Navigator (2003???2027), F-150 Lightning (2022???2026), and Bronco (2022???2026), plus one additional verified platform. The Cinch is also offered in additional sizes, widths, and finish options across the lineup for builds that need a different spec.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x135 \/ 6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.53\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eGloss Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eRotary Forged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2200 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e26 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Weld Off-Road","offers":[{"title":"Default Title","offer_id":68713222570265,"sku":"W10579098450","price":325.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/cinch_glossblack_white__40498.jpg?v=1794773544"},{"product_id":"18x9-gray-black-wheel-ledge-6-w107-6x5-5-12-w10789084451","title":"Ledge 6 W107 Gray Black | 18x9 | 6x5.5 -12mm Offset | W10789084451","description":"\u003cp\u003eBuilt on the 6x139.7 Platform\u003c\/p\u003e\u003cp\u003eThe Weld Off-Road Ledge 6 W107 is a split six-spoke, 18x9 truck wheel finished in Satin Gunmetal Gray with a Black Simulated Beadlock ring. The 106.10mm hub bore fits the 6x139.7 (6x5.5) bolt pattern, covering platforms like the Chevrolet Silverado 1500 (1999-2026), GMC Sierra 1500 (2000-2026), Toyota Tacoma (1995-2026), Toyota Tundra (2000-2026), and Chevrolet K1500 (1988-1999), with 10 additional verified fits across 114 total fitments. The 2,500-lb load rating supports full-size truck payloads, and the 4.53 inches of backspacing positions the mounting surface for a clean, outboard stance on these platforms.\u003c\/p\u003e\u003cp\u003eSplit Six-Spoke Design with Exposed Hardware\u003c\/p\u003e\u003cp\u003eThe Ledge 6 carries a concave split six-spoke face that gives the wheel visual depth without overcomplicating the design. Each pair of spokes tapers toward the hub, framing the center and drawing the eye inward. Lug hardware sits exposed around the hub bore, visible on the face in a circle at the center of the wheel where it mounts to the vehicle. The simulated beadlock ring wraps the outer edge in black, adding the rugged, off-road-ready character that defines the Ledge 6's look without the weight or complexity of a functional beadlock. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eRotary Forged Construction\u003c\/p\u003e\u003cp\u003eWeld Off-Road brings its racing-derived manufacturing discipline to the Ledge 6 through rotary forging. The barrel is heated and spun under pressure, compressing and densifying the aluminum grain structure for a stronger, stiffer barrel than standard casting alone delivers. That process keeps the wheel at 29 lbs while maintaining the structural integrity a loaded truck demands. One-piece construction means the face, barrel, and hub are formed as a continuous unit, eliminating the seams and hardware of multi-piece assemblies.\u003c\/p\u003e\u003cp\u003eOffset and Stance\u003c\/p\u003e\u003cp\u003eAt -12mm offset, the Ledge 6's mounting surface sits rearward of the wheel's centerline, pushing the face outward for a more aggressive, outboard stance than a zero or positive offset wheel. On a 9-inch-wide barrel, this offset positions the wheel with a noticeable outboard presence that suits lifted truck builds running the 6x139.7 pattern. The Ledge 6 is also offered in additional sizes and finish options across the lineup for builds with different fitment targets.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.53\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eGray Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eRotary Forged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2500 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e29 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Weld Off-Road","offers":[{"title":"Default Title","offer_id":68713222701337,"sku":"W10789084451","price":360.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/ledge6_grayblack_white__98356.jpg?v=1794773545"},{"product_id":"17x9-satin-black-wheel-cinch-6x135-6x5-5-12-w10479098450","title":"Cinch Satin Black | 17x9 | 6x135\/6x5.5 -12mm Offset | W10479098450","description":"\u003cp\u003eFord and GM 6-Lug Platforms, One Wheel\u003c\/p\u003e\u003cp\u003eThe Weld Off-Road Cinch covers two of the most popular 6-lug truck bolt patterns in a single dual-drilled wheel. The 6x135 pattern fits Ford F-150 (2004-2026), Ford Expedition (2003-2027), Lincoln Navigator (2003-2027), Ford F-150 Lightning (2022-2026), and Ford Bronco (2022-2026), with one additional verified platform rounding out the fitment list. The 6x139.7 (6x5.5) pattern opens the Cinch to GM full-size trucks and SUVs, including Silverado 1500, Sierra 1500, Tahoe, Suburban, Yukon, and Escalade, as well as Toyota Tundra, 4Runner, Tacoma, Nissan Titan, and similar applications. The 106.10mm hub bore fits across these platforms. At 17x9 with a -12mm offset, the mounting surface sits rearward of the wheel's centerline, pushing the wheel outward for a more aggressive stance than stock positioning.\u003c\/p\u003e\u003cp\u003eSplit Seven-Spoke Design with Simulated Beadlock\u003c\/p\u003e\u003cp\u003eThe Cinch runs a split seven-spoke layout with gloss black windows and accents contrasting against the satin black finish. Exposed lug hardware sits in a ring around the hub bore, visible on the face and adding a purposeful, hardware-forward look to the build. Rivets accent the simulated beadlock ring, giving the Cinch the visual character of a full beadlock setup without the added complexity. The outer lip adds depth to the profile, and the satin black finish holds its appearance through trail dust, road film, and seasonal exposure without demanding constant upkeep. A center cap is included.\u003c\/p\u003e\u003cp\u003eRotary Forged Construction\u003c\/p\u003e\u003cp\u003eWeld's drag racing engineering roots run through the Off-Road lineup, and the Cinch reflects that heritage in how it's built. The barrel is heated and spun under pressure in the rotary forging process, compressing and densifying the aluminum grain structure for a stronger, stiffer barrel than standard casting alone delivers. The result is a one-piece alloy wheel that weighs in at 26 lbs, right in line with what rotary forged construction achieves at this diameter, and carries a 2,200-lb load rating suited for truck applications.\u003c\/p\u003e\u003cp\u003eFitment Details for the Build\u003c\/p\u003e\u003cp\u003eThe Cinch's dual-drilled pattern makes it a practical anchor for builds that cross platforms or for buyers who want flexibility without sacrificing wheel quality. The -12mm offset places the face outward of center, adding visual width to the stance on both Ford and GM full-size platforms. Backspacing measures 4.53 inches. The Cinch is also offered in additional sizes, finishes, and bolt-pattern options across the lineup for builds with different clearance or stance targets.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x135 \/ 6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.53\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSatin Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eRotary Forged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eLoad Rating\u003c\/th\u003e\n\u003ctd\u003e2200 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e26 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Weld Off-Road","offers":[{"title":"Default Title","offer_id":68713222930713,"sku":"W10479098450","price":325.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/cinch_satinblack_white__08785.jpg?v=1794773545"},{"product_id":"18x9-satin-black-wheel-ledge-6-w108-6x5-5-12-w10889084451","title":"Ledge 6 W108 Satin Black | 18x9 | 6x5.5 -12mm Offset | W10889084451","description":"\u003cp\u003eBuilt for the 6x139.7 Platform\u003c\/p\u003e\u003cp\u003eThe Chevrolet Silverado 1500, GMC Sierra 1500, Toyota Tacoma, Toyota Tundra, and Chevrolet K1500 are the core platforms for the Weld Off-Road Ledge 6, covering fitment from 1988 through 2026 across 114 verified applications. The 106.10mm hub bore fits these 6x139.7 (6x5.5) platforms, and the wheel is also offered in additional bolt-pattern options for buyers on other platforms.\u003c\/p\u003e\u003cp\u003eSplit Six-Spoke Design with Simulated Beadlock\u003c\/p\u003e\u003cp\u003eThe Ledge 6 runs a split six-spoke layout with a concave face profile that gives the wheel visual depth from any angle. Each of the six split spokes flows from the hub outward, and the concave geometry pulls the face inward relative to the outer lip, creating a layered look that suits the scale of full-size and mid-size truck builds. The outer ring carries a simulated beadlock treatment, a signature Weld Off-Road design element that brings the aggressive aesthetic of a true beadlock ring without the added weight or complexity. Lug hardware sits exposed around the hub bore, visible on the face and adding to the purposeful, hardware-forward character of the design. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eRotary Forged Construction\u003c\/p\u003e\u003cp\u003eWeld's racing heritage runs through the Ledge 6's construction. The barrel is heated and spun under pressure, compressing and densifying the aluminum grain structure through the barrel wall for a stronger, stiffer result than standard low-pressure casting alone. That process lets Weld Off-Road deliver a wheel that weighs in at 29 lbs while maintaining the structural integrity the brand's performance background demands. The satin black finish is applied across the face and barrel, with the simulated beadlock ring carrying the same satin treatment for a cohesive, matte-toned look that holds up through trail dust and road grime.\u003c\/p\u003e\u003cp\u003eOffset and Fitment Details\u003c\/p\u003e\u003cp\u003eAt -12mm offset on a 9-inch-wide barrel, the mounting surface sits rearward of the wheel's centerline, positioning the face slightly outboard of stock. The 4.53 inches of backspacing places the inner edge of the wheel with clearance in mind for lifted truck builds. This is a wheel sized and offset for trucks running a lift kit, where the outboard positioning and concave face profile work with the added ride height to fill the fender arch with presence. The Ledge 6 is also available in additional sizes, widths, and finishes across the lineup for builds with different fitment targets.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.53\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSatin Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eRotary Forged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e29 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Weld Off-Road","offers":[{"title":"Default Title","offer_id":68713223029017,"sku":"W10889084451","price":360.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/ledge6_satinblack_white__11456.jpg?v=1794773546"},{"product_id":"17x9-satin-bronze-wheel-cinch-w115-6x135-6x5-5-12-w11579098450","title":"Cinch W115 Satin Bronze | 17x9 | 6x135\/6x5.5 -12mm Offset | W11579098450","description":"\u003cp\u003eFord and GM 6-Lug Platforms, One Wheel\u003c\/p\u003e\u003cp\u003eThe Weld Off-Road Cinch W115 is dual-drilled for both 6x135 and 6x139.7 (6x5.5) bolt patterns, covering Ford F-150 (2004-2026), Ford Expedition (2003-2027), Lincoln Navigator (2003-2027), Ford F-150 Lightning (2022-2026), and Ford Bronco (2022-2026), plus GM 6-lug platforms running 6x139.7 and one additional verified application. The 106.10mm hub bore fits these platforms, and the 2,600-lb load rating supports truck-duty use. At 17x9 with a -12mm offset, the mounting surface sits rearward of centerline, pushing the wheel slightly outboard of stock positioning for a more planted, assertive stance.\u003c\/p\u003e\u003cp\u003eSplit Seven-Spoke Design with Simulated Beadlock\u003c\/p\u003e\u003cp\u003eSeven split spokes radiate from the hub in a clean, open pattern that gives the Cinch a purposeful, trail-ready character. The satin bronze finish across the face and spokes is paired with a satin black simulated beadlock ring at the outer edge, creating a two-tone look that suits builds going for a rugged, off-road-ready aesthetic without the complexity of a functional beadlock setup. Exposed lug hardware sits in a circle around the hub bore, visible on the wheel face and adding to the no-nonsense, hardware-forward appearance. A center cap is included with this wheel.\u003c\/p\u003e\u003cp\u003eRotary Forged Construction\u003c\/p\u003e\u003cp\u003eWeld Off-Road brings its racing-derived manufacturing discipline to the Cinch through rotary forging. The barrel is heated and spun under pressure, compressing and densifying the aluminum grain structure through the barrel wall. The result is a stronger, stiffer barrel than standard low-pressure casting delivers, and at 26 lbs this wheel lands right in the expected weight range for a rotary forged 17-inch truck wheel. That combination of barrel integrity and controlled weight reflects Weld's approach to off-road builds: engineered for real-world demands, not just visual impact.\u003c\/p\u003e\u003cp\u003eFitment Across Ford and GM 6-Lug Trucks\u003c\/p\u003e\u003cp\u003eFord F-150 owners running the 6x135 bolt pattern get a direct fit here, as do Expedition and Navigator buyers on the same pattern. The dual-drill also opens this wheel to the 6x139.7 universe, which includes Chevy Silverado 1500, GMC Sierra 1500, Tahoe, Suburban, Yukon, and Escalade platforms, among others. Backspacing measures 4.53 inches. The Cinch W115 is also offered in additional sizes, finishes, and bolt-pattern options across the lineup for builds with different fitment requirements.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBolt Pattern\u003c\/th\u003e\n\u003ctd\u003e6x135 \/ 6x139.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eOffset\u003c\/th\u003e\n\u003ctd\u003e-12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eBackspacing\u003c\/th\u003e\n\u003ctd\u003e4.53\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eHub Bore\u003c\/th\u003e\n\u003ctd\u003e106.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSatin Bronze\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eRotary Forged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne Piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth align=\"left\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e26 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Weld Off-Road","offers":[{"title":"Default Title","offer_id":68713223323929,"sku":"W11579098450","price":325.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/files\/cinch_satinbronze_white__66511.jpg?v=1794773546"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8094\/9273\/collections\/images_20_2819_29_1789175707__24549.png?v=1794865782","url":"https:\/\/offroadsource.com\/collections\/weld-off-road.oembed?page=4","provider":"Offroad Source","version":"1.0","type":"link"}