Description
Fabtech's Crawler long arm coil systems replace all eight of the link arms with extended length units to allow for smooth operation at extreme angles. The link arms are mounted up high on the frame to increase ground clearance without the need to bend the Links as with other long arm systems on the market. Construction of the link arms is nothing short of the best heavy duty units you can buy. Each lower link is built from 2'' OD .313 thick wall DOM that is so strong Fabtech provides a warranty against bending. Link arms are internally threaded to accept the ground breaking Fabtech 5 Ton Joint that is guaranteed never to wear out. Weld on 1/4'' thick steel Track Bar brackets provide the proper roll center front and rear and will not fail leaving you stranded. This system utilizes Fabtech's Standard coil springs that are a single rate design and provide great all around suspension performance. Factory load carrying capacities are retained in these quality springs. Includes 8 Long Arm Links & Mounts, Standard Travel Coil Springs Front & Rear, Sway Bar Links Front & Rear, Adjustable Track Bar Front, Track Bar Bracket Rear, Brake Lines Front & Rear, E Brake Bracket, Front Bump Stop Extensions, Rear Bump Stop Brackets and Dirt Logic 2.25 shocks.
Crawler Lift System w/DLSS Shocks; 3 in. Lift; w/Dirt Logic 2.25 Non Resi Shocks;
TIRE SIZE - 35/12.50R17 WHEEL - 17X9 W/4 1/2" BS W/MINOR TRIMMING; TIRE SIZE - 35/12.50R18 WHEEL - 18X9 W/4 1/2" BS W/MINOR TRIMMING; TIRE SIZE - 35/12.50R20 WHEEL - 20X9 W/5" BS W/MINOR TRIMMING; TIRE SIZE - 37/12.50R18 WHEEL - 18X9 W/4 1/2" BS W/CUTTING; TIRE SIZE - 37/12.50R20 WHEEL - 20X9 W/5" BS W/CUTTING; W/TUBE FENDERS: TIRE SIZE - 37/12.50R17 WHEEL - 17X9 W/4 1/2" BS W/CUTTING; TIRE SIZE - 325/60R20 WHEEL - 20X9 W/5" BS W/MINOR TRIMMING; TIRE SIZE - 325/65R18 WHEEL - 18X9 W/4 1/2" BS W/MINOR TRIMMING; 50. INSTALLATION REQUIRES WELDING.; 120. EXHAUST MODIFICATION REQUIRED ON ALL 2012-2018 JEEP WRANGLERS ORDER FTS94060 LOOP DELETE PIPE.; 153. REQUIRES DRIVESHAFTS FOR 4 DOOR MODEL 07-11 (FRONT FTS94057) (REAR FTS94052); 154. REQUIRES DRIVESHAFTS FOR 4 DOOR MODEL 12-18 (FRONT FTS94057) (REAR FTS94059)
Fitment:
Jeep Wrangler JK Rubicon 2018
Jeep Wrangler JK Sahara 2018
Jeep Wrangler JK Sport 2018
Jeep Wrangler JK Unlimited Rubicon 2018
Jeep Wrangler JK Unlimited Sahara 2018
Jeep Wrangler JK Unlimited Sport 2018
Jeep Wrangler Unlimited 70th Anniversary 2011
Jeep Wrangler Unlimited 75th Anniversary 2016
Jeep Wrangler Unlimited Rubicon 2007
Jeep Wrangler Unlimited Rubicon 2008
Jeep Wrangler Unlimited Rubicon 2009
Jeep Wrangler Unlimited Rubicon 2010
Jeep Wrangler Unlimited Rubicon 2011
Jeep Wrangler Unlimited Rubicon 2012
Jeep Wrangler Unlimited Rubicon 2013
Jeep Wrangler Unlimited Rubicon 2014
Jeep Wrangler Unlimited Rubicon 2015
Jeep Wrangler Unlimited Rubicon 2016
Jeep Wrangler Unlimited Rubicon 2017
Jeep Wrangler Unlimited Sahara 2007
Jeep Wrangler Unlimited Sahara 2008
Jeep Wrangler Unlimited Sahara 2009
Jeep Wrangler Unlimited Sahara 2010
Jeep Wrangler Unlimited Sahara 2011
Jeep Wrangler Unlimited Sahara 2012
Jeep Wrangler Unlimited Sahara 2013
Jeep Wrangler Unlimited Sahara 2014
Jeep Wrangler Unlimited Sahara 2015
Jeep Wrangler Unlimited Sahara 2016
Jeep Wrangler Unlimited Sahara 2017
Jeep Wrangler Unlimited Sport 2010
Jeep Wrangler Unlimited Sport 2011
Jeep Wrangler Unlimited Sport 2012
Jeep Wrangler Unlimited Sport 2013
Jeep Wrangler Unlimited Sport 2014
Jeep Wrangler Unlimited Sport 2015
Jeep Wrangler Unlimited Sport 2016
Jeep Wrangler Unlimited Sport 2017
Jeep Wrangler Unlimited Sport S 2016
Jeep Wrangler Unlimited X 2007
Jeep Wrangler Unlimited X 2008
Jeep Wrangler Unlimited X 2009
Jeep Wrangler Unlimited X 2010
Additional Information
air_freight_prohibited: |
false |
not_carb_approved: |
false |
ltl_freight_required: |
false |
prop_65: |
Y |
part_type: |
automotive |
epa: |
N/A |
carb_acknowledgement_required: |
false |
clearance_item: |
t |
regular_stock: |
false |
