Description
ICON Vehicle Specific (V.S.) 2.5 Aluminum Series shocks with CDEV are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. For piggyback and specific remote reservoir applications, ICON'S unique use of a 6061 billet aluminum manifold a few inches below the top cap of the shock creates an internal Bump Zone that when used creates an additional 20% of damping force. This additional force helps prevent harsh bottom outs and controls the suspension when compressing at high velocity. This RXT rear shock features a side-mount eyelet making it shorter in collapsed length, longer at extension, and still fit in the factory mounting location, allowing for additional wheel travel when paired with ICON Multi-Rate Leaf Springs. Like all ICON'S Shock Absorbers, V.S. 2.5 Aluminum Series shocks with CDEV are 100% rebuildable and 100% revalveable.
2014-2021 TUNDRA RXT REAR 2.5 VS REMORE RESERVOIR WITH CDEV SHOCK PAIR
TECH NOTE: Also requires installation of IIC kit (Part # 53506) and CDEV front coilovers (Part # 58750E)
- ICON's CDE Valve technology allows for in vehicle adjustment of compression damping settings and active adjustment via the ICON Intelligent Control (IIC)
- One-piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- ICON’s internal “Bump Zone” increases damping by 20% to provide more control as the shock approaches full compression
- One-piece, hard anodized, impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- Remote reservoir design improves heat dissipation to reduce shock fade during prolonged use
- PTFE lined spherical bearings and application specific mounting hardware
- 7/8” diameter induction hardened, chrome plated shock shaft
- Nitrogen charged monotube design with piggyback reservoir
- 6061 aircraft grade aluminum CNC machined components
- 100% Revalveable
- 100% Rebuildable
Fitment:
Toyota Tundra 1794 Edition 2014
Toyota Tundra 1794 Edition 2015
Toyota Tundra 1794 Edition 2016
Toyota Tundra 1794 Edition 2017
Toyota Tundra 1794 Edition 2018
Toyota Tundra 1794 Edition 2019
Toyota Tundra 1794 Edition 2020
Toyota Tundra 1794 Edition 2021
Toyota Tundra Limited 2014
Toyota Tundra Limited 2015
Toyota Tundra Limited 2016
Toyota Tundra Limited 2017
Toyota Tundra Limited 2018
Toyota Tundra Limited 2019
Toyota Tundra Limited 2020
Toyota Tundra Limited 2021
Toyota Tundra Nightshade 2021
Toyota Tundra Platinum 2014
Toyota Tundra Platinum 2015
Toyota Tundra Platinum 2016
Toyota Tundra Platinum 2017
Toyota Tundra Platinum 2018
Toyota Tundra Platinum 2019
Toyota Tundra Platinum 2020
Toyota Tundra Platinum 2021
Toyota Tundra SR 2014
Toyota Tundra SR 2015
Toyota Tundra SR 2016
Toyota Tundra SR 2017
Toyota Tundra SR 2018
Toyota Tundra SR 2019
Toyota Tundra SR 2020
Toyota Tundra SR 2021
Toyota Tundra SR5 2014
Toyota Tundra SR5 2015
Toyota Tundra SR5 2016
Toyota Tundra SR5 2017
Toyota Tundra SR5 2018
Toyota Tundra SR5 2019
Toyota Tundra SR5 2020
Toyota Tundra SR5 2021
Toyota Tundra Trail 2021
Toyota Tundra TRD Pro 2015
Toyota Tundra TRD Pro 2016
Toyota Tundra TRD Pro 2017
Toyota Tundra TRD Pro 2019
Toyota Tundra TRD Pro 2020
Toyota Tundra TRD Pro 2021
Additional Information
air_freight_prohibited: |
false |
not_carb_approved: |
false |
ltl_freight_required: |
false |
prop_65: |
Y |
part_type: |
automotive |
epa: |
N/A |
carb_acknowledgement_required: |
false |
regular_stock: |
false |
