Description
This Jeep JK drag link flip kit was designed to correct steering geometry with a lifted Jeep Wrangler JK. The JK drag link flip kit was designed to be used with the Clayton Off Road 3.5 and 4.5-inch lift kits, and welding is required to install this kit. The Jeep JK drag link flip kit also raises the trackbar and will add clearance between the trackbar and differential cover.
It also strengthens the trackbar bracket by bolting our ¼ bracket and welding it to the front axle.
Note - This new ¼ trackbar bracket is designed to be bolted into the stock location, then welded for superior strength. It also incorporates a new relocated lower swaybar mount. This bracket was designed to be installed with the three (3) supplied 3/8 bolts and one (1) 9/16 bolt with spacer and allows for temporary driving without welding. You can drill and install this kit in your driveway, then drive to a certified welder, and have him weld both sides of the bracket.
Parts List:
Tools Required:
Product Features:
NOTE: 1. Drilling, cutting, and welding are required to install this kit.
Product Specifications
- Kit Package: Yes
