Evo Manufacturing King Shocks Steering Stabilizer

King Shocks Steering Stabilizer Features:

Stabilizer bodies are bored and honed after cadmium plating

Highly developed "balanced flow" port designs on 6061 aluminum alloy piston

Heat treated stainless alloy valve shims

Wear bands are made from a Rulon composite

Special long wearing urethane seals

Large 3/4" or 7/8" diameter shafts, depending on the stabilizer length, have a tensile strength of 100,000 pounds per square inch

Replaceable Teflon lined stainless steel spherical bearings

The King Shocks Steering Stabilizer Allows you to Run Oversized Tires with an Aggressive Tread Pattern With oversized off-road tires, you get a lot more grip to the surfaces that you come in contact with, especially when you air-down, that could the tire to be unstable on uneven terrain. With the King Shocks Steering Stabilizer you can aid these stability issues that come with running oversized tires and aggressive tread patterns. Taking on challenging trails can bring unwanted forces to your steering system that could cause damage and wear down your tires or vital steering components. Steering stabilizers will offer you the necessary damping performance and adjustability for running oversized off-road tires on your Jeep Wrangler JL or Jeep Gladiator JT. Tensile Strength of 100,000lb per Square Inch The King Shocks Steering Stabilizer provides a tried-and-tested steering stabilizer upgrade to replace your factory Jeep Wrangler JL or Jeep Gladiator JT unit. You will get enhance valve function from a bored and honed, cadmium plated stabilizer body that ensures cylindricity and an effective piston seal. These pistons are constructed 6061 aluminum alloy with a "balanced-flow" port design to provide superior damping that you would expect from an aftermarket stabilizer. For a consistent fade free performance, the stainless alloy valve shims are heat treated so that they do not fracture and resist deformation at higher temperatures. Each stabilizer includes wear bands that also contribute to the low deformation especially under high compressive forces. To make sure you are getting product worth your money, each stabilizer has special long wearing urethane seals that have been tested to last 450,000 miles without failure on 18-wheeler semi-trucks.

Fitment:

Jeep Wrangler JL

Jeep Gladiator JT

Important Note: If you have a 2021 mid-year or newer model Wrangler or Gladiator, with the long square necked mounting bolt, you will need to use the older short square neck mounting bolt, Mopar part number MPR6510774AA