JKS Manufacturing JKSOGS159 Rear Adjustable Trackbar for 07-18 Jeep Wrangler JK with 0-6" Lift

The JKS Adjustable Trackbar is an essential upgrade to any lifted Jeep® still using the OE trackbar. The length is easily adjusted to perfectly center the axle housing beneath the vehicle. Unlike relocation brackets, our Adjustable Trackbar is compatible with virtually any suspension system and allows constant changes as vehicle modifications require.

Additional Details

The ends of each JKS Adjustable Trackbar feature bushings specifically chosen to provide maximum off-road performance while minimizing the transfer of road noise and vibrations. A Johnny Joint® spherical polyurethane (2.0" or 2.5"), Dura-Thane™ performance polyurethane or OE rubber bushing is used, depending on each application's requirements. Manufactured from 1.25" x 0.250" DOM tubing, JKS Adjustable Trackbars are bent to OE specifications for proper geometry and clearance. A zinc plating and durable powdercoat finish provide excellent protection from corrosion and trail debris. The trackbar controls lateral movement of the axle housing... It is attached to the chassis and axle on opposite sides of the vehicle with flexible mounting points to accommodate suspension travel. Unfortunately, the fixed length of the OE trackbar won't accommodate ride height adjustments. Changing the distance between mounting points forces the axle housing out of alignment with the rest of the vehicle. Unless corrected, this condition will place unnecessary stress on related suspension and steering components, create alignment problems, and prevent proper suspension & swaybar disconnect operation.

Properly aligns axle housing with chassis on coil sprung Jeeps. Prevents undue stress on related components and centers swaybar for proper disconnect operation. Ultra-strong, DOM tube construction features OE bends for correct geometry and clearance. Zinc plated and powder coated for excellent protection from corrosion and debris. Robust threaded design enables user to position axle in 1/16" increments for extremely precise control.

Installation Notes
Installation Difficulty:
Skill Level 3 -
Advanced
1. Compatible with Rubicon and Unlimited models. 2. Rear Trackbar Brace is strongly recommended to reinforce weak factory trackbar mount on axle.
Installation Time: 1-2 hours
Installation Instructions Available
Parts Included

Specifications

• Shipping Weight: 12lb
• Shipping Dimensions: 50in x 4in x 4in (L x W x H)

Fitment

• 2018 Jeep Wrangler 2-Door (JK)
• 2017 Jeep Wrangler 2-Door (JK)
• 2016 Jeep Wrangler 2-Door (JK)
• 2015 Jeep Wrangler 2-Door (JK)
• 2014 Jeep Wrangler 2-Door (JK)
• 2013 Jeep Wrangler 2-Door (JK)
• 2012 Jeep Wrangler 2-Door (JK)
• 2011 Jeep Wrangler 2-Door (JK)
• 2010 Jeep Wrangler 2-Door (JK)
• 2009 Jeep Wrangler 2-Door (JK)
• 2008 Jeep Wrangler 2-Door (JK)
• 2007 Jeep Wrangler 2-Door (JK)
• 2018 Jeep Wrangler Unlimited 4-Door (JK)
• 2017 Jeep Wrangler Unlimited 4-Door (JK)
• 2016 Jeep Wrangler Unlimited 4-Door (JK)
• 2015 Jeep Wrangler Unlimited 4-Door (JK)
• 2014 Jeep Wrangler Unlimited 4-Door (JK)
• 2013 Jeep Wrangler Unlimited 4-Door (JK)
• 2012 Jeep Wrangler Unlimited 4-Door (JK)
• 2011 Jeep Wrangler Unlimited 4-Door (JK)
• 2010 Jeep Wrangler Unlimited 4-Door (JK)
• 2009 Jeep Wrangler Unlimited 4-Door (JK)
• 2008 Jeep Wrangler Unlimited 4-Door (JK)
• 2007 Jeep Wrangler Unlimited 4-Door (JK)