Ford's 6x135 Platform, Covered
The Ford F-150 (2004-2026) is the anchor platform for the Icon Alloys Shield, and the 6x135 bolt pattern extends that fitment across the Ford Expedition (2003-2027), Lincoln Navigator (2003-2027), Ford F-150 Lightning (2022-2026), and Ford Bronco (2022-2026), plus one additional verified platform. The 87.1mm hub bore fits these Ford and Lincoln applications, and the 2,500-lb load rating supports the payload demands of full-size truck and SUV use.
Six-Spoke Design with Exposed Hardware
The Shield runs a clean six-spoke layout with a satin black finish across the face and barrel. Lug hardware sits exposed in a circle around the hub bore, visible on the face and adding a purposeful, hardware-forward look that suits the off-road character Icon Alloys is known for. The outer lip gives the wheel a defined profile, and the satin black finish holds up to trail dust, road film, and seasonal grime without demanding constant attention. A center cap is included.
One-Piece Cast Alloy Construction
Icon Alloys built the Shield as a one-piece cast alloy wheel, a construction that supports the deep spoke geometry and outer lip profile in a single continuous form. Cast alloy carries proven long-haul strength at a value point that makes it the most widely used construction in aftermarket truck wheels, and the Shield's 26-lb weight comes in slightly under the typical 28-lb benchmark for 17-inch alloy truck wheels in this class. The one-piece form keeps the structure intact through repeated trail and road loads without the complexity of multi-piece assembly.
Offset and Fitment Details
At +6mm offset on an 8.5-inch-wide barrel, the Shield's mounting surface sits just forward of centerline, keeping the wheel positioned close to the factory track width. The 4.99 inches of backspacing places the inner edge of the barrel with clearance in mind for these Ford platforms. This is a truck-scaled fitment that works on stock-height builds and leveled setups alike, with the six-spoke satin black design carrying the visual weight of Icon's function-first off-road identity.
The Shield is also offered in additional sizes and finish options across the lineup, covering a range of bolt patterns for other truck platforms.
Specifications
| Diameter | 17 |
|---|---|
| Width | 8.5 |
| Bolt Pattern | 6x135 |
| Offset | 6 mm |
| Backspacing | 4.99" |
| Hub Bore | 87.1 mm |
| Finish | Black |
| Material | Alloy |
| Construction | One Piece |
| Load Rating | 2500 lbs |
| Weight | 26 lbs |
| Diameter | 17 |
|---|---|
| Width | 8.5 |
| Bolt pattern | 6x135 |
| Lug count | 6 |
| Offset | 6 |
| Backspacing | 4.99 |
| Bore | 87.1 |
| Finish | Black |
| Color | Black |
| Model | Shield |
| Material | Alloy |
| Construction | One Piece |
| Spokes | 6 |
| Directional | No |
| Load rating | 2500 |
| Manufacturer part # | 1017856350SB |
Select your vehicle at the top of the page to confirm fitment.
Shop all ICON Alloys products.
Add your reviews app block to this section in the theme editor.


