KM722 Technic Anthracite | 18x9 | 6x5.5 +18mm Offset | KM72289068418

KMCSKU: KM72289068418

Specs at a glance

Size18x9
Bolt pattern6x139.7
Offset18mm
Backspacing5.71"
Hub bore106.1mm
Load rating2500 lb
$424.99 each. Sold in sets of 4: $1,699.96 for the set.
Price:
Sale price$424.99

Minimum of 4

Check if this fits your vehicle Select your vehicle

Built for the 6x139.7 Platform

The KMC KM722 Technic lands on one of the most widely shared 6-lug truck bolt patterns in the aftermarket: 6x139.7 (6x5.5). Verified fitment covers the Chevrolet Silverado 1500 (1999-2026), GMC Sierra 1500 (2000-2026), Toyota Tacoma (1995-2026), Toyota Tundra (2000-2026), and Chevrolet K1500 (1988-1999), with 10 additional verified platforms beyond those five. The 106.1mm hub bore fits these platforms, and the 2,500-lb load rating supports the demands of full-size and mid-size truck use.

Split Ten-Spoke Mesh Design

The KM722 Technic runs a split ten-spoke mesh layout with a concave face profile, giving the wheel visual depth and a layered look that suits the scale of a full-size truck. The exposed lug hardware sits in a circle around the hub bore at the center of the face, adding a purposeful, hardware-forward detail to the overall look. A center cap is included with this wheel. The outer lip frames the concave face and adds to the wheel's dimensional presence. Anthracite finish gives the face a dark, muted tone that holds its character across seasons and road conditions without demanding constant upkeep.

One-Piece Cast Alloy Construction

KMC builds the Technic as a one-piece cast alloy wheel, a construction that has made cast the most-used method in aftermarket wheel manufacturing for good reason. Cast molds support complex geometry, including the split-spoke mesh layout and concave face profile that define this design, in a single continuous shape. At 29.7 lbs, the Technic comes in below the typical weight for an 18-inch alloy truck wheel in this class, delivering reliable long-haul value with the structural integrity the 6x139.7 platform demands.

Offset and Fitment Details

At 18x9 with a +18mm offset, the mounting surface sits forward of the wheel's centerline, positioning the wheel closer to the vehicle's face side. This keeps the wheel tucked within the fender arch for a clean, controlled stance on stock and leveled trucks alike. Backspacing measures 5.71 inches. The +18mm offset suits daily-driven builds where clearance and a composed stance take priority. The Technic is also offered in additional sizes and finishes across the KM722 lineup, so other bolt-pattern groups and build targets are covered within the model family.

Specifications

Diameter 18
Width 9
Bolt Pattern 6x139.7
Offset 18 mm
Backspacing 5.71"
Hub Bore 106.1 mm
Finish Anthracite
Material Alloy
Construction One Piece
Load Rating 2500 lbs
Weight 33.7 lbs

You may also like

Recently viewed