D620 Hardline Black | 18x9 | 8x6.5 +20mm Offset | D62018908257

FuelSKU: D62018908257

Specs at a glance

Size18x9
Bolt pattern8x165.1
Offset20mm
Backspacing5.79"
Hub bore125.2mm
Load rating3700 lb
$395.99 each. Sold in sets of 4: $1,583.96 for the set.
Price:
Sale price$395.99

Minimum of 4

Check if this fits your vehicle Select your vehicle

Ten Spokes, Gloss Black, Milled Detail

The Fuel Hardline D620 is an 18x9 one-piece alloy wheel finished in gloss black with milled spoke surfaces. The milling cuts through the gloss black to expose the raw aluminum beneath, creating a two-tone contrast across each spoke without adding a separate finish layer. Rivets accent the face, adding a hardware-forward detail consistent with Fuel's aggressive truck aesthetic. The lugs sit behind the included center cap, keeping the hub area clean and uncluttered. Backspacing measures 5.79 inches.

Concave Profile and Spoke Geometry

The Hardline runs a concave face, meaning the spoke plane recedes inward from the outer lip toward the hub. That geometry gives the wheel visual depth and a more dimensional profile compared to a flat-faced design. Ten spokes radiate from the hub, each carrying the milled finish treatment that defines the wheel's look. The outer lip frames the concave bowl and is a structural element of the one-piece cast construction.

One-Piece Alloy Construction

This wheel is cast as a single piece of aluminum alloy, with no welds or assembly joints between the face and barrel. The 3,700-lb load rating supports heavy-duty truck applications, including payload and towing use. At 35 lbs, the wheel is built to the weight expectations of an 18-inch HD truck wheel in this class. The 125.2mm hub bore fits 8x165.1 (8x6.5) platforms. A center cap is included.

Offset and Fitment Context

The +20mm offset places the mounting surface forward of the wheel's centerline, positioning the wheel slightly inboard relative to a zero-offset wheel of the same width. On a 9-inch-wide barrel, this keeps the wheel tucked within the fender line rather than pushing outboard. That positioning suits stock and leveled HD truck builds where clearance inside the wheel well is a consideration.

Verified HD Truck Fitment

The Hardline D620 fits the Ram 2500 (2011-2027) and Dodge Ram 2500 (1994-2010), along with the Chevrolet Silverado 2500 HD and GMC Sierra 2500 HD (both 2001-2010). It also fits the Dodge Ram 1500 (2006-2008), with 10 additional verified platforms beyond those five, covering 99 total fitment applications. The Hardline is also offered in additional sizes, widths, and finish options across the lineup for builds that need a different fit.

Specifications

Diameter 18
Width 9
Bolt Pattern 8x165.1
Offset 20 mm
Backspacing 5.79"
Hub Bore 125.2 mm
Finish Black
Material Alloy
Construction One Piece
Load Rating 3700 lbs
Weight 39 lbs

You may also like

Recently viewed