Built for Ford's 6x135 Platform
Ford F-150 owners (2004-2026) have one of the most recognized 6x135 platforms in the segment, and the Icon Alloys Rebound is sized and offset specifically for it. The 87.1mm hub bore fits the F-150, Ford Expedition (2003-2027), Lincoln Navigator (2003-2027), Ford F-150 Lightning (2022-2026), and Ford Bronco (2022-2026), covering six verified fitment applications across Ford's full-size and off-road lineup. At 18x9 with a +6mm offset, the mounting surface sits just forward of the wheel's centerline, keeping the wheel position close to stock geometry while the 9-inch width adds presence without pushing the wheel outboard aggressively.
Eight-Spoke Concave Design with Simulated Beadlock
The Rebound's eight solid spokes extend to the outer edge of the face, creating a concave profile that gives the wheel visual depth from any angle. The Satin Black finish keeps the look purposeful and low-maintenance, holding up to trail dust, brake residue, and seasonal road grime without demanding constant attention. A simulated beadlock ring runs the outer face, adding the rugged, trail-ready aesthetic that fits the Rebound's off-road character. The exposed lug hardware sits in a circle around the hub bore at the center of the face, visible and intentional as part of the overall design. A center cap is included with this wheel.
One-Piece Alloy Construction, Off-Road Capable
Icon Alloys built the Rebound as a one-piece cast aluminum wheel, and the construction suits what the wheel was designed to do. Cast aluminum supports the Rebound's deep spoke profile and concave geometry in a single continuous shape, maintaining structural integrity through the kind of load cycles that come with lifted suspension and off-road use. At 29 lbs, this wheel comes in noticeably under the typical weight for an 18-inch alloy truck wheel in this class. The 2,750-lb load rating supports full-size truck payloads across the verified fitment range.
Caliper Clearance and Scrub Radius, Dialed In
Icon Alloys approached the Rebound with suspension clearance as a primary concern, not an afterthought. The offset and backspacing (5.24 inches) were chosen to maximize caliper clearance and reduce scrub radius, which translates to more natural steering feel and unobstructed suspension travel. These are the kinds of details that matter when the wheel is paired with a lift kit, where geometry changes can introduce handling compromises if the wheel offset is not accounted for. The Rebound's replaceable decorative bolts along the outer face also serve a practical purpose: they absorb curb contact before the wheel itself does, and can be swapped out rather than leaving the wheel with permanent damage.
Fitment Across the Lineup
The Rebound is offered across multiple sizes from 17 to 20 inches in diameter, with 5-lug, 6-lug, and 8-lug bolt patterns and offset options ranging from -12mm to +25mm, so there are configurations available for a range of builds beyond this specific 18x9 setup.
Specifications
| Diameter | 18 |
|---|---|
| Width | 9 |
| Bolt Pattern | 6x135 |
| Offset | 6 mm |
| Backspacing | 5.24" |
| Hub Bore | 87.1 mm |
| Finish | Black |
| Material | Alloy |
| Construction | One Piece |
| Load Rating | 2750 lbs |
| Weight | 29 lbs |
| Diameter | 18 |
|---|---|
| Width | 9 |
| Bolt pattern | 6x135 |
| Lug count | 6 |
| Offset | 6 |
| Backspacing | 5.24 |
| Bore | 87.1 |
| Finish | Black |
| Color | Black |
| Model | Rebound |
| Material | Alloy |
| Construction | One Piece |
| Spokes | 8 |
| Directional | No |
| Load rating | 2750 |
| Manufacturer part # | 1818906352SB |
Select your vehicle at the top of the page to confirm fitment.
Shop all ICON Alloys products.
Add your reviews app block to this section in the theme editor.


