D666 Shok Bronze | 18x9 | 5x150 +20mm Offset | D66618905657

FuelSKU: D66618905657

Specs at a glance

Size18x9
Bolt pattern5x150
Offset20mm
Backspacing5.79"
Hub bore110.2mm
Load rating2500 lb
$370.99 each. Sold in sets of 4: $1,483.96 for the set.
Price:
Sale price$370.99

Minimum of 4

Check if this fits your vehicle Select your vehicle

Built for the Toyota 5x150 Platform

Toyota Tundra owners from 2007 through 2021 get a wheel sized and drilled for their platform with the Fuel Shok D666. The 5x150 bolt pattern is Toyota's full-size signature, shared across the Tundra, Sequoia, Land Cruiser 200, and Lexus LX 570, and this 18x9 fits all of them. The 110.20mm hub bore fits these Toyota platforms, and the 2,500-lb load rating supports the demands of a full-size truck build. At 5.79 inches of backspacing, the mounting surface positions the wheel with a measured inboard bias suited to the Tundra's factory fender geometry. Four additional verified fits round out the platform coverage beyond the Tundra.

Six-Spoke Design with Fuel's Signature Details

The Shok carries six solid spokes in a concave profile that gives the face visual depth without overcomplicating the design. One spoke features embossed Fuel branding, a detail that signals the brand's confidence in what they put out. The outer lip includes an indented pattern along its edge, adding a layer of texture that breaks up the profile at the wheel's perimeter. Lug hardware sits exposed around the hub bore, visible on the face as part of the design rather than hidden behind a cap. A Fuel-branded center cap is included.

One-Piece Cast Aluminum Construction

The Shok is cast in one piece from aluminum alloy, a construction that supports the concave spoke geometry and the detailed lip edge in a single continuous form. Cast aluminum's ability to hold complex shapes through the mold process is exactly what a design like this demands: the concave depth, the embossed spoke detail, and the indented lip pattern all come out of the same pour. At 29 lbs, the wheel carries the structural integrity for full-size truck use across on-road and off-road terrain.

Matte Bronze Finish

The matte bronze finish gives the Shok a warm, earthy tone that suits the Tundra's proportions and pairs well with both factory and lifted builds. Matte surfaces hold their character through trail dust and road film without the upkeep demands of a polished or machined finish, making this a practical choice for trucks that see real use. The finish is consistent across the face, spokes, and lip, with no machined contrast.

Fitment Details

At 18x9 with a +20mm offset, the mounting surface sits forward of the wheel's centerline, positioning the face closer to the vehicle. This offset keeps the wheel within the Tundra's fender envelope across stock and leveled setups. The Shok is also offered in additional sizes, widths, and finishes across the lineup, including matte black and anthracite options, with both 5-lug and 6-lug bolt patterns available for other platform fits.

Specifications

Diameter 18
Width 9
Bolt Pattern 5x150
Offset 20 mm
Backspacing 5.79"
Hub Bore 110.2 mm
Finish Bronze
Material Alloy
Construction One Piece
Load Rating 2500 lbs
Weight 33 lbs

You may also like

Recently viewed