FT100 Red Black | 18x9 | 5x5 0mm Offset | FT100-18905127Q00RTB

Fittipaldi OffroadSKU: FT100-18905127Q00RTB

Specs at a glance

Size18x9
Bolt pattern5x127
Offset0mm
Backspacing5"
Hub bore71.5mm
Load rating2500 lb
$297.00 each. Sold in sets of 4: $1,188.00 for the set.
Price:
Sale price$297.00

Minimum of 4

Check if this fits your vehicle Select your vehicle

Jeep and Truck Fitment on the 5x127 Pattern

Jeep Wrangler owners (2007-2026) and Jeep Grand Cherokee owners (1999-2026) are the natural home for the Fittipaldi Offroad FT100, and the 5x127 (5x5) bolt pattern covers both platforms with authority. The 71.5mm hub bore fits these Jeep applications along with older GM full-size platforms including the Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), with 10 additional verified fits across the lineup. At 18x9 with a 0mm offset, the mounting surface sits exactly at the wheel's centerline, placing the wheel in a neutral, balanced position that works across stock, leveled, and lifted setups alike. Backspacing is 5 inches, and the 2,500-lb load rating supports the demands of full-size Jeep and truck builds.

Full-Face Design with Exposed Lugs

The FT100 runs a full-face design, meaning the disc spans the entire front of the wheel without traditional open spokes breaking up the surface. The face carries a machined finish with a red tint overlay, giving the surface a metallic depth that the color accent sharpens. A black lip ring frames the outer edge, creating a clean contrast between the machined face and the barrel. Lug hardware sits exposed on the face in a circle around the hub bore, visible against the machined surface and adding a purposeful, hardware-forward look that suits off-road builds. A center cap is included with this wheel.

One-Piece Alloy Construction

The FT100 is cast in one-piece alloy, a construction that supports the full-face design's continuous geometry from hub to outer edge without seams or assembly points. Cast alloy handles the complex surface transitions that a full-face disc demands, keeping the machined finish consistent across the face. At 38.8 lbs, the wheel carries the structural integrity for the Jeep and truck applications it was built for.

Finish Details That Define the Look

The Machined with Red Tint and Black Lip Ring finish is the FT100's defining visual statement. The machined surface catches the red tint across the face, while the black lip ring grounds the outer edge in a contrasting dark band. This combination suits builds that want a color-accented wheel without going full custom paint, and the machined surface holds up to the road and trail exposure that Wrangler and truck builds put it through. The FT100 is also offered in additional sizes, finishes, and bolt-pattern options across the Fittipaldi Offroad lineup for builds with different fitment needs.

Specifications

Diameter 18
Width 9
Bolt Pattern 5x127
Offset 0 mm
Backspacing 5"
Hub Bore 71.5 mm
Finish Red Black
Material Alloy
Construction One Piece
Load Rating 2500 lbs
Weight 38.8 lbs

You may also like

Recently viewed