Split 948M Black Milled | 20x9 | 6x5.5 0mm Offset | 948M-29060-00

RacelineSKU: 948M-29060-00

Specs at a glance

Size20x9
Bolt pattern6x139.7
Offset0mm
Backspacing5"
Hub bore106.1mm
Load rating2500 lb
$399.00 each. Sold in sets of 4: $1,596.00 for the set.
Price:
Sale price$399.00

Minimum of 4

Check if this fits your vehicle Select your vehicle

Built for the 6x139.7 Platform

The Raceline Split 948M lands on some of the most popular 6-lug truck platforms on the road. Verified fitment covers the Chevrolet Silverado 1500 (1999???2026), GMC Sierra 1500 (2000???2026), Toyota Tacoma (1995???2026), Toyota Tundra (2000???2026), and Chevrolet K1500 (1988???1999), with 10 additional verified platforms across the 6x139.7 (6x5.5) bolt pattern universe. The 106.10mm hub bore fits these platforms, and the 2,500-lb load rating supports the demands of a full-size truck build. At 20x9 with a 0mm offset and 5 inches of backspacing, the mounting surface sits exactly at the wheel's centerline, positioning the barrel evenly between the hub face and the outer edge for a balanced, tucked-to-flush stance.

Split Eight-Spoke Design with Milled Edges

The Split 948M carries a split eight-spoke face with milled spoke edges that cut a bright contrast against the gloss black finish. Each pair of spokes branches outward from the hub area, giving the face an open, layered look with visual depth that suits the scale of a full-size truck. The exposed lug hardware sits in a circle around the hub bore at the center of the face, adding a purposeful, hardware-forward detail to the overall look. A center cap is included with this wheel.

One-Piece Cast Construction

Raceline builds the Split 948M as a one-piece cast alloy wheel, a construction that supports the complex split-spoke geometry and deep spoke profile this design demands. Cast molds carry undercuts, branching spoke shapes, and contoured lips in a single continuous form, keeping the design's structural integrity intact across the full load cycle. At 40 lbs, the weight is consistent with what one-piece cast alloy delivers at this diameter and width, and the construction brings the proven long-haul reliability that has made cast the most-used method in aftermarket wheel manufacturing.

Finish and Fitment Details

The gloss black finish covers the face, spokes, and barrel, while the milled spoke edges are machined to a brighter, reflective contrast that breaks up the dark surface and adds definition to each spoke. The outer lip is present and visible, framing the face with a clean edge. This 20x9 wheel is also offered in additional sizes, widths, and finishes across the Split lineup, giving you options if this specific combination does not match your build.

Specifications

Diameter 20
Width 9
Bolt Pattern 6x139.7
Offset 0 mm
Backspacing 5"
Hub Bore 106.1 mm
Finish Black Milled
Material Alloy
Construction One Piece
Load Rating 2500 lbs
Weight 40 lbs

You may also like

Recently viewed