Shield Black | 20x9 | 5x150 +16mm Offset | 1020905556SB

ICON AlloysSKU: ico1020905556SB

Specs at a glance

Size20x9
Bolt pattern5x150
Offset16mm
Backspacing5.63"
Hub bore110.1mm
Load rating3700 lb
$328.04 each. Sold in sets of 4: $1,312.16 for the set.
Price:
Sale price$328.04

Minimum of 4

Check if this fits your vehicle Select your vehicle

Built for the 5x150 Platform

Toyota Tundra owners (2007-2021) have one of the most distinctive bolt patterns in the full-size truck segment, and the Icon Alloys Shield is sized specifically for it. The 5x150 pattern is shared across the Tundra, Sequoia, Land Cruiser 200, Lexus LX 570, and similar Toyota full-size platforms, and the 110.1mm hub bore fits these applications. With a 3,700-lb load rating, the Shield handles the payload and towing demands that come with full-size truck ownership.

Six-Spoke Design with Exposed Hardware

The Shield runs six spokes with a clean, purposeful geometry that suits the off-road character Icon Alloys is known for. Lug hardware sits exposed around the hub bore at the center of the face, adding a functional, hardware-forward look that fits the brand's trail-ready identity. The outer lip gives the wheel a defined profile, and the Satin Black finish holds its appearance through the kind of use these trucks see. Satin Black resists the glare of high-gloss finishes while staying sharp against the bodywork of a Tundra or Sequoia. A center cap is included.

One-Piece Cast Alloy Construction

Icon Alloys builds the Shield as a one-piece cast alloy wheel, a construction that supports the complex spoke geometry and deep face profile this design calls for. Cast molds allow the spoke shape, hub detail, and outer lip to come out of a single continuous pour, keeping the structural integrity intact across the full wheel. At 37 lbs, the Shield comes in under the typical weight for a 20-inch alloy truck wheel in this class, a practical advantage for a platform that already carries significant unsprung weight.

Fitment Details

At 20x9 with a +16mm offset, the mounting surface sits slightly forward of the wheel's centerline, positioning the face closer to the fender opening. The 5.63 inches of backspacing keeps the inner barrel clear of suspension components across the Tundra's fitment range. This offset works across stock, leveled, and lifted Tundra builds, giving you a planted, proportional stance without pushing the wheel aggressively outboard. The Shield is also offered in additional sizes and finishes across the lineup for builds that need a different fit.

Specifications

Diameter 20
Width 9
Bolt Pattern 5x150
Offset 16 mm
Backspacing 5.63"
Hub Bore 110.1 mm
Finish Black
Material Alloy
Construction One Piece
Load Rating 3700 lbs
Weight 37 lbs

You may also like

Recently viewed