Jeep and Truck Fitment on the 5x127 Pattern
Jeep Wrangler owners (2007-2026) get a wheel sized and offset specifically for lifted builds, and the Icon Alloys Rebound delivers exactly that. The 5x127 (5x5) bolt pattern also fits the Jeep Grand Cherokee (1999-2026), Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), and GMC Yukon (1992-1999), with 10 additional verified platforms rounding out a total of 32 verified fits. The 71.5mm hub bore fits these platforms, and the 2,750-lb load rating supports the demands of lifted truck and SUV use.
Eight-Spoke Concave Design with Simulated Beadlock
The Rebound's eight solid spokes extend to the outer edge of the face, creating a concave profile that gives the wheel visual depth from any angle. The bronze finish with black simulated beadlock ring adds a two-tone, trail-ready look that suits lifted Jeep and truck builds. Lug hardware is exposed and visible on the face, sitting in a circle around the hub bore where the wheel mounts to the vehicle. The outer face also features replaceable decorative bolts that serve a practical purpose: they absorb curb contact before the wheel itself does, so you can swap the bolts rather than the wheel after a close call on the trail. A center cap is included.
One-Piece Alloy Construction Built for Off-Road Use
Icon Alloys built the Rebound as a one-piece aluminum alloy wheel, and that construction suits the brand's off-road-first philosophy. Cast alloy supports the complex concave spoke geometry and the deep outer lip in a single continuous shape, keeping the structural integrity intact through repeated trail impacts and load cycles. At 37 lbs, the Rebound carries the weight you'd expect from a 20-inch alloy wheel built to handle real off-road conditions rather than just look the part.
Offset and Fitment Details
At -12mm offset, the mounting surface sits rearward of the wheel's centerline, pushing the wheel outward relative to the hub. On a 9-inch-wide wheel, this offset places the face in a more outboard position than a neutral or positive offset would, which works well with the lifted suspension setups the Rebound was designed around. Icon Alloys specifically engineered the offset to reduce scrub radius, supporting unhindered steering and suspension function on lifted platforms. The 4.53-inch backspacing reflects that outboard positioning. The Rebound is also offered in additional sizes from 17 to 20 inches, widths from 8.5 to 9 inches, and across 5-lug, 6-lug, and 8-lug bolt patterns in multiple finishes.
Specifications
| Diameter | 20 |
|---|---|
| Width | 9 |
| Bolt Pattern | 5x127 |
| Offset | -12 mm |
| Backspacing | 4.53" |
| Hub Bore | 71.5 mm |
| Finish | Bronze |
| Material | Alloy |
| Construction | One Piece |
| Load Rating | 2750 lbs |
| Weight | 37 lbs |
| Diameter | 20 |
|---|---|
| Width | 9 |
| Bolt pattern | 5x127 |
| Lug count | 5 |
| Offset | -12 |
| Backspacing | 4.53 |
| Bore | 71.5 |
| Finish | Bronze |
| Color | Bronze |
| Model | Rebound |
| Material | Alloy |
| Construction | One Piece |
| Spokes | 8 |
| Directional | No |
| Load rating | 2750 |
| Manufacturer part # | 1820907345BR |
Select your vehicle at the top of the page to confirm fitment.
Shop all ICON Alloys products.
Add your reviews app block to this section in the theme editor.


