FF10 Polished | 20x9 | 8x170 +1mm Offset | DF1020901750L

FuelSKU: DF1020901750L

Specs at a glance

Size20x9
Bolt pattern8x170
Offset1mm
Backspacing5.04"
Hub bore125.1mm
$892.00 each. Sold in sets of 4: $3,568.00 for the set.
Price:
Sale price$892.00

Minimum of 4

Check if this fits your vehicle Select your vehicle

Built From a Single Billet of Aluminum

The Fuel Forged FF10 starts as a solid aluminum billet and is forged under high pressure, compressing and aligning the grain structure throughout the entire piece. That process produces a wheel that is measurably stronger than a cast equivalent at the same dimensions. At 37 lbs in a 20x9 forged format, the FF10 comes in notably light for its class, where comparable forged 20-inch truck wheels typically run closer to 45 lbs. One-piece construction means no seams, no bonded joints, and no multi-piece hardware to maintain.

Six-Spoke Design With Exposed Lug Hardware

Six spokes radiate from the hub to the outer barrel, keeping the face open and the profile clean. The lug hardware sits exposed in a circle around the hub bore, visible on the face rather than hidden behind a center cap. That detail is a deliberate design choice: the hardware becomes part of the visual. A center cap is included with this wheel. The 5.04 inches of backspacing and +1mm offset place the mounting surface nearly at the wheel's centerline, positioning the wheel close to the hub without pulling it inboard or pushing it outboard.

Polished Finish on a Forged Face

The FF10 carries a full polished finish across the face, spokes, and barrel. Polished aluminum reflects light directly off the machined surface rather than through a paint or powdercoat layer, giving the wheel a bright, mirror-like appearance that suits the clean spoke geometry. Maintaining a polished finish takes more attention than a painted or matte surface, but the result is a depth of shine that no painted wheel can replicate.

Fitment for Ford Super Duty Platforms

The 8x170 bolt pattern and 125.10mm hub bore fit the Ford F-250 Super Duty and F-350 Super Duty from 1999 through 2026, along with one additional verified platform. The FF10 is also offered in additional sizes, widths, and finishes across the Fuel Forged lineup for builds with different fitment requirements.

Specifications

Diameter 20
Width 9
Bolt Pattern 8x170
Offset 1 mm
Backspacing 5.04"
Hub Bore 125.1 mm
Finish Polished
Material Forged
Construction One Piece
Weight 37 lbs

You may also like

Recently viewed