FF20 Black Milled | 22x14 | 8x170 -76mm Offset | DE2022401745

FuelSKU: DE2022401745

Specs at a glance

Size22x14
Bolt pattern8x170
Offset-76mm
Backspacing4.51"
Hub bore125.1mm
$1,286.00 each. Sold in sets of 4: $5,144.00 for the set.
Price:
Sale price$1,286.00

Minimum of 4

Check if this fits your vehicle Select your vehicle

Built at the Top of the Fuel Lineup

The Fuel Forged FF20 is a one-piece forged wheel, and that construction distinction matters. Rather than casting molten aluminum into a mold, forging starts with a solid billet and applies extreme pressure to shape the wheel, aligning the grain structure of the aluminum for greater strength and density throughout. The result is a 22x14 wheel that comes in at 45 lbs, meaningfully under the typical weight for a forged 22-inch truck wheel in this width class. That weight advantage comes directly from the forged process, not from thinning the material.

Split Eight-Spoke Face with Milled Accents

The FF20 runs a split eight-spoke design with a black finish across the face and milled accents along the spokes. The milling removes a precise layer of the black surface to expose the raw aluminum beneath, creating a two-tone contrast that holds up without paint or plating on the machined areas. The lug hardware sits exposed on the face around the hub bore, visible in a circle at the center of the wheel. A center cap (1003-49B) is included and covers the hub area when installed. Backspacing measures 4.51 inches.

Offset and Stance at -76mm

At -76mm, the mounting surface sits well rearward of the wheel's centerline, pushing the face and barrel significantly outboard from the hub. On a 14-inch-wide wheel, that offset places the face well outside the fender plane on most Super Duty builds. This is an aggressive outboard position that commits the truck to a wide, dominant stance. The 125.1mm hub bore fits Ford F-250 and F-350 Super Duty platforms across the full 1999-2026 production run, along with one additional verified platform.

Fitment for Ford Super Duty Builds

The 8x170 bolt pattern is the Ford Super Duty standard, covering the F-250 and F-350 from 1999 through 2026. This is a purpose-built Super Duty wheel in a size and offset that suits builds running lift kits with room to run a wide tire under the fender. The FF20 is also offered in additional sizes, widths, and finishes across the Fuel Forged lineup for builds with different fitment targets.

Specifications

Diameter 22
Width 14
Bolt Pattern 8x170
Offset -76 mm
Backspacing 4.51"
Hub Bore 125.1 mm
Finish Black Milled
Material Forged
Construction One Piece
Weight 45 lbs

You may also like

Recently viewed