Gradient Black Machined | 24x14 | 8x170 -70mm Offset | W11244017475

Weld Off-RoadSKU: W11244017475

Specs at a glance

Size24x14
Bolt pattern8x170
Offset-70mm
Backspacing4.74"
Hub bore125.1mm
Load rating3700 lb
$680.00 each. Sold in sets of 4: $2,720.00 for the set.
Price:
Sale price$680.00

Minimum of 4

Check if this fits your vehicle Select your vehicle

Ford Super Duty Fitment, Built for Presence

Ford F-250 and F-350 Super Duty owners (1999-2026) running the 8x170 bolt pattern have a wheel sized for the platform's scale and stance demands. The Weld Off-Road Gradient arrives at 24x14 with a -70mm offset, placing the mounting surface well rearward of the wheel's centerline and pushing the wheel outward for an aggressive, wide-track stance. At 14 inches wide with a -70mm offset, this combination qualifies as genuinely aggressive fitment: the outboard positioning adds substantial visual width and poke to Super Duty builds running a lift kit. The 125.1mm hub bore fits F-250 and F-350 platforms, and the 3,700-lb load rating supports the payload and towing demands these trucks are built around. Backspacing measures 4.74 inches. One additional verified platform rounds out the fitment universe beyond the two Super Duty generations named here.

Split Eight-Spoke Design with Machined Detail

The Gradient's face runs eight split spokes in a concave profile, each spoke face machined to a brighter contrast against the satin black surfaces. The outer lip carries the same machined treatment, creating a clean two-tone effect that ties the face and the wheel's perimeter together. Exposed lug hardware sits in a circle around the hub bore at the center of the face, visible against the satin black finish and adding a purposeful, hardware-forward look to the design. A center cap is included with this wheel.

One-Piece Cast Alloy Construction

Weld Off-Road brings its racing-rooted build standards to the Gradient's one-piece cast alloy construction. Cast aluminum supports the Gradient's deep concave spoke profile and complex face geometry in a single continuous shape, maintaining structural integrity through the full load cycle without joints or fasteners between sections. At 51 lbs, the Gradient sits right at the typical weight for a 24-inch alloy truck wheel of this width, a result of the cast process carrying the full 14-inch barrel and concave face in one pour. The 3,700-lb load rating reflects the construction's capacity for Super Duty-class payloads.

A 24-Inch Show-Scale Statement

At 24 inches in diameter, the Gradient operates at show-scale proportions where visual presence is the point. The satin black finish across the spoke surfaces and barrel holds its character through road use without the upkeep demands of a polished or chrome finish, while the machined spoke faces and outer lip keep the wheel from reading as a single flat tone. The Gradient is also offered in additional sizes, widths, and finish options across the lineup for builds with different fitment targets.

Specifications

Diameter 24
Width 14
Bolt Pattern 8x170
Offset -70 mm
Backspacing 4.74"
Hub Bore 125.1 mm
Finish Black Machined
Material Alloy
Construction One Piece
Load Rating 3700 lbs
Weight 51 lbs

You may also like

Recently viewed