An All-Terrain Tire Built for the Full Fuel Package The Fuel Gripper AT is an all-terrain tire built for truck builds that demand capability on and off the pavement. In 285/65R18, it pairs directly with 18-inch wheels and brings Fuel Off-Road's aggressive identity into the rubber itself. The 285mm section width and 65-series aspect ratio give the tire a tall, substantial sidewall profile that suits lifted trucks and fills out the wheel well with the proportions the Gripper AT was shaped around. The sidewall carries a clean black finish with no raised lettering, keeping the look focused on the wheel face and the overall stance of the build. Load Range E Construction The Gripper AT runs 10-ply construction with a Load Range E rating. At 80 psi, each tire is rated to carry 3,640 pounds, putting this squarely in HD truck territory. That capacity backs serious payload and towing work without straining the rating. The reinforced 10-ply construction also adds sidewall stiffness and puncture resistance across rough terrain, which matters when the build leaves pavement behind. Tread Pattern and All-Terrain Performance The Gripper AT's tread pattern is built for mixed-surface use: open enough to clear mud and loose material, structured enough to stay composed on highway miles. Shoulder lugs extend the biting edges toward the sidewall for grip when the truck is off-camber or working through loose terrain. The tread blocks are spaced to channel debris and water away from the contact patch, keeping traction consistent across wet roads and light off-road conditions. This is an all-terrain tire tire built for drivers who split time between daily driving and trail use without wanting to compromise either. Weight and Build Character At 70.5 pounds per tire, the Gripper AT reflects what 10-ply construction and a deep all-terrain tread profile weigh in at this size. The reinforced sidewall and aggressive tread depth account for the mass, and the result is a tire that holds up under the demands of a loaded truck on rough roads. Fitment and Availability The 285/65R18 Gripper AT is designed for 18-inch wheels and carries a manufacturer warranty. The Gripper AT line is offered across a range of sizes, so if your build calls for a different diameter or sidewall height, other configurations are available to match.
Specifications
| Size | 285/65R18 |
|---|---|
| Load Range | E |
| Load Index | 125 |
| Speed Rating | S |
| Section Width | 285 |
| Aspect Ratio | 65 |
| Rim Diameter | 18" |
| Overall Diameter | 32.5" |
| Tread Depth | 17/32" |
| Sidewall | Black Side Wall |
| Weight | 70.5 lbs |
| Size | 285/65R18 |
|---|---|
| Size format | Metric |
| Width | 285 |
| Aspect ratio | 65 |
| Rim | 18 |
| Diameter | 32.5 |
| Load index | 125 |
| Speed rating | S |
| Load range | E |
| Ply | 10 |
| Load capacity | 3638 |
| Model | Gripper AT |
| Tread type | All-Terrain |
| Tread depth | 17 |
| Sidewall | Black Side Wall |
| Weight | 70.5 |
| Run flat | No |
| Manufacturer part # | RFAT28565R18 |
Select your vehicle at the top of the page to confirm fitment.
Shop all Fuel products.
Add your reviews app block to this section in the theme editor.

