A Capable All-Terrain Tire Built for Year-Round Duty The Kenda Klever AT2 is an all-terrain tire built for light trucks that need confident traction across mixed surfaces without giving up daily-drive manners. In LT225/75R16, the 75-series aspect ratio delivers a substantial sidewall profile that absorbs road imperfections and holds up on rougher terrain. The tread pattern is designed to handle wet pavement, gravel, dirt, and light off-road conditions with equal composure, making it a strong choice for trucks that split time between the highway and unpaved roads. Three-Peak Mountain Snowflake Certified The Klever AT2 carries the Three-Peak Mountain Snowflake certification, which means it has been independently tested and verified to meet severe snow traction standards. That certification matters for trucks operating in northern climates or anywhere winter conditions are a regular reality. Deep snow, packed ice, and cold-weather surfaces are within this tire's tested capability, so you can run an all-terrain tire year-round without swapping to a dedicated winter set. Load Range E Construction for Real Work With a 10-ply Load Range E build and a load index of 115, each tire is rated to carry 2,833 pounds at 80 psi. That capacity puts the Klever AT2 squarely in the loaded half-ton and light three-quarter-ton tier, backing up trucks that regularly carry weight in the bed or tow on a regular basis. The 10-ply construction also reinforces the sidewall against punctures and cuts when the road surface gets rough. Sidewall Finish and Mileage Backing The sidewall carries raised black lettering, a molded relief finish that keeps the look intentional and clean against the wheel face. The Klever AT2 is backed by a 50,000-mile treadwear warranty, reflecting Kenda's confidence in the tire's long-term wear consistency across the mixed-surface use it was built for. The treadwear rating supports extended service life, making this a practical choice for trucks that put on real miles across varied conditions. Fitment and Available Configurations This LT225/75R16 mounts on 16-inch wheels. The Klever AT2 line spans a wide range of sizes, so if your build calls for a different diameter or section width, the model is available in numerous configurations to match.
Specifications
| Size | LT225/75R16 |
|---|---|
| Load Range | E |
| Load Index | 115 |
| Speed Rating | S |
| Section Width | 225 |
| Aspect Ratio | 75 |
| Rim Diameter | 16" |
| Overall Diameter | 29.5" |
| Tread Depth | 15/32" |
| Sidewall | Raised Black Lettering |
| Weight | 36.78 lbs |
| Size | LT225/75R16 |
|---|---|
| Size format | Metric |
| Width | 225 |
| Aspect ratio | 75 |
| Rim | 16 |
| Diameter | 29.5 |
| Load index | 115 |
| Speed rating | S |
| Load range | E |
| Ply | 10 |
| Load capacity | 2679 |
| Model | Klever AT2 |
| Tread type | All-Terrain |
| Tread depth | 15 |
| Sidewall | Raised Black Lettering |
| Weight | 36.78 |
| Run flat | No |
| Manufacturer part # | KEN628006 |
Select your vehicle at the top of the page to confirm fitment.
Shop all Kenda products.
Add your reviews app block to this section in the theme editor.

