LT245/75R16 Klever AT All-Terrain Tire Load Range E | KEN280022

KendaSKU: KEN280022

Specs at a glance

SizeLT245/75R16
Load range / plyE / 10-ply
Load index / speed120/116Q
Max load3086 lb
Tread depth15.5/32"
TreadAll-Terrain
$205.87 each. Sold in sets of 4: $823.48 for the set.
Price:
Sale price$205.87

Minimum of 4

Check if this fits your vehicle Select your vehicle

A Capable All-Terrain Tire Built for Four Seasons The Kenda Klever AT is a light truck all-terrain tire built for drivers who need traction across pavement, gravel, dirt, and winter conditions without swapping rubber when the weather turns. In LT245/75R16, it mounts on a 16-inch wheel and carries a 75-series aspect ratio that gives the sidewall enough height to absorb rough terrain without feeling vague on the highway. This is a tire tuned for year-round versatility on trucks that see real use. Tread Pattern and All-Season Capability The Klever AT runs an open, aggressive tread pattern with shoulder lugs that extend into the sidewall for added grip when the surface gets loose. Stone ejectors between the tread blocks keep debris from embedding in the grooves and wearing the tread unevenly. The tread channels are wide enough to clear mud and slush, and the Klever AT carries Three-Peak Mountain Snowflake certification, meaning it has been tested and confirmed for severe snow service. That certification matters for northern climates and mountain driving where a standard all-season tire falls short. This is a tire you can run through a full winter without compromising traction on packed snow or icy roads. Load Capacity for Working Trucks Load Range E with a 120/116 dual load index and 10-ply construction puts the Klever AT in the heavy half-ton to three-quarter-ton tier. At 80 psi, each tire is rated to 3,086 pounds, giving a four-tire setup over 12,000 pounds of total carrying capacity. That rating backs trucks that haul regularly, tow on weekends, or carry payload that would stress a lighter-rated tire. Sidewall Finish and Mounting Options The Klever AT carries outlined white lettering on the sidewall. Because this tire is non-directional, you can mount the lettered side outward for a classic truck look or flip it inboard to show the clean black inner sidewall. Either way, the finish suits the character of a lifted or leveled truck running an aggressive stance. Warranty and Size Availability A manufacturer warranty applies to the Klever AT. The Klever AT line is offered across a wide range of sizes, so if your build calls for a different diameter or section width, other configurations are available to match your setup.

Specifications

Size LT245/75R16
Load Range E
Load Index 120/116
Speed Rating Q
Section Width 245
Aspect Ratio 75
Rim Diameter 16"
Overall Diameter 30.5"
Tread Depth 15.5/32"
Sidewall Outlined White Lettering

You may also like

Recently viewed