LT265/60R20 Razr AT All-Terrain Tire Load Range E | TL00070100

MaxxisSKU: TL00070100

Specs at a glance

SizeLT265/60R20
Load range / plyE / 10-ply
Load index / speed121/118S
Max load3197 lb
Tread depth15/32"
TreadAll-Terrain
$342.41 each. Sold in sets of 4: $1,369.64 for the set.
Price:
Sale price$342.41

Minimum of 4

Check if this fits your vehicle Select your vehicle

A Capable All-Terrain Tire Built for Four Seasons The Maxxis Razr AT is a light truck all-terrain tire built to handle everything from daily commutes to unpaved back roads without flinching when winter arrives. In LT265/60R20, it pairs a 265mm section width with a 60-series aspect ratio on a 20-inch wheel, giving your truck a proportional, planted stance that suits lifted and leveled builds alike. The Razr AT carries Maxxis's global engineering depth into a tire that works year-round, not just in fair weather. Three-Peak Certification for Real Winter Conditions The Razr AT holds the Three-Peak Mountain Snowflake certification, which means it has passed standardized testing for severe snow traction. That certification matters in northern climates where all-terrain tires are expected to pull through deep snow and icy conditions without swapping to dedicated winter rubber. This is a tire you can run through the full calendar year with confidence, not just through the dry months. Tread Pattern and All-Terrain Performance The Razr AT's tread pattern is built around open, aggressive blocks with shoulder lugs that extend into the sidewall for added grip when the surface gets loose. Stone ejectors between the tread blocks keep debris from embedding and wearing the tread unevenly. On pavement, the pattern stays composed and predictable. On gravel, dirt, and light mud, the shoulder lugs and tread block spacing give the tire something to bite into. The treadwear rating reflects a tire built for longevity across mixed surfaces, holding up through the kind of varied use that all-terrain tires are actually put through. Load Capacity and Construction Load Range E with 10-ply construction backs a load index of 121 (single) and 118 (dual), translating to 3,197 pounds per tire at 80 psi in single application. That puts the Razr AT firmly in heavy half-ton and three-quarter-ton territory, with enough capacity to handle a loaded bed or a serious tow setup without pushing the rating. The 10-ply construction also reinforces the sidewall against punctures and cuts, which matters when you're running off-pavement regularly. Sidewall Finish and Fitment The sidewall carries raised black lettering, a molded relief finish that keeps the look intentional and refined without the high-contrast of white lettering. It suits builds where the wheel face is doing the visual work and the tire stays clean and understated. At 57.73 pounds per tire, the weight reflects the 10-ply construction and LT-rated reinforcement that make this tire capable under load. A manufacturer warranty applies. The Razr AT is also offered across a wide range of sizes, so if your build calls for a different diameter or aspect ratio, the line has options worth exploring.

Specifications

Size LT265/60R20
Load Range E
Load Index 121/118
Speed Rating S
Section Width 265
Aspect Ratio 60
Rim Diameter 20"
Overall Diameter 32.5"
Tread Depth 15/32"
Sidewall Raised Black Lettering
Weight 57.73 lbs

You may also like

Recently viewed