ReadyLift Suspension 69-6000 SST Mild Lift Kit for 07-18 Jeep Wrangler JK

The ReadyLift 69-6000 SST Mild Lift Kit will raise the front of your Jeep JK 3.0 inches and 2.0 inches in the rear. Rather than replace your proven OEM springs or shocks, ReadLift incorporated their proven spring spacer technology into this comprehensive package which allows you to retain your OEM coil springs which translates into retaining the stock ride quality. You don't need to have to deal with a rough ride from other kits that replace your springs and shocks. This kit has it all and is done RIGHT!

Check out the optional AEV ProCAL Module, a great finishing touch to any lift kit as it can reprogram your vehicles computer compensating for gear ratio and tire size changes after lift kit installation not to mention many other additional features.

Many states have laws that limit the maximum height of a lifted vehicle. Never exceed the legal height limit.

Additional Details

Tough powdercoated steel front and rear spring spacers provide the altitude adjustment while the panhard bar relocation bracket and shock extensions work together to keep that factory suspension and alignment geometry. That is very important if you want your Jeep JK to ride and handle properly. Front and rear bump stop extension brackets and included them in the kit to help maintain the OEM compression travel.

This rugged new Jeep SST Lift Kit comes with all necessary hardware and instructions, as well as a Lifetime Limited Warranty on our products. Installation of the ReadyLift 69-6000 Jeep JK Wrangler SST Lift Kit System allows for use of up to 35 inch tall tires. We rigorously tested this lift kit system using 35 inch tires on 18 inch wheels which proved to be a nice combination even when flexing the suspension during crawling trials

Installation Notes
Installation Difficulty:
Skill Level 3 -
Advanced
1. Drilling May Be Required.
Installation Time: 4-6 hours
Installation Instructions Available
Parts Included
Warranty
Limited Lifetime Warranty.

Specifications

• Shocks Included: Without Shocks
• Max Tire Size: 35
• Lift Height Range: 3 - 4.5 inch
• Included Parts: Bump Stop Extensions, Front Track Bar Bracket, Rear Track Bar Bracket, Shock Extensions
• Shipping Weight: 1lb
• Shipping Dimensions: 23in x 18in x 8in (L x W x H)

Fitment

• 2018 Jeep Wrangler 2-Door (JK)
• 2017 Jeep Wrangler 2-Door (JK)
• 2016 Jeep Wrangler 2-Door (JK)
• 2015 Jeep Wrangler 2-Door (JK)
• 2014 Jeep Wrangler 2-Door (JK)
• 2013 Jeep Wrangler 2-Door (JK)
• 2012 Jeep Wrangler 2-Door (JK)
• 2011 Jeep Wrangler 2-Door (JK)
• 2010 Jeep Wrangler 2-Door (JK)
• 2009 Jeep Wrangler 2-Door (JK)
• 2008 Jeep Wrangler 2-Door (JK)
• 2007 Jeep Wrangler 2-Door (JK)
• 2018 Jeep Wrangler Unlimited 4-Door (JK)
• 2017 Jeep Wrangler Unlimited 4-Door (JK)
• 2016 Jeep Wrangler Unlimited 4-Door (JK)
• 2015 Jeep Wrangler Unlimited 4-Door (JK)
• 2014 Jeep Wrangler Unlimited 4-Door (JK)
• 2013 Jeep Wrangler Unlimited 4-Door (JK)
• 2012 Jeep Wrangler Unlimited 4-Door (JK)
• 2011 Jeep Wrangler Unlimited 4-Door (JK)
• 2010 Jeep Wrangler Unlimited 4-Door (JK)
• 2009 Jeep Wrangler Unlimited 4-Door (JK)
• 2008 Jeep Wrangler Unlimited 4-Door (JK)
• 2007 Jeep Wrangler Unlimited 4-Door (JK)