Rough Country 4in Suspension Lift Kit for 07-18 Jeep Wrangler JK

Gain additional ground clearance and off-road ability with the Rough Country 4in Suspension Lift Kit. This easy to install lift kit will allow you to fit 35x12.50 tires on your two door Jeep Wrangler JK. Rough Country tunes their coil springs to the OEM spring rate, for a lift that rides like a factory Jeep. Rough Country includes either their N3 or Vertex remote reservoir shocks with this kit. The twin-tube nitrogen-charged N3 shocks provide smooth a smooth ride with 10-stage variable valving. For additional versatility, Vertex Remote Reservoir shocks are fully adjustable. They are equally at home on the highway and on the trail, and you can optimize compression at the twist of a knob. Rough County's V2 shocks feature a monotube design that separates the shock oil from high-pressure nitrogen. This reduces cavitation and fade, and makes for a high-performing off-road shock.

Many states have laws that limit the maximum height of a lifted vehicle. Never exceed the legal height limit.

Additional Details

Shock Options: Select from Rough Country’s N3 shocks, V2 Shocks, or their Vertex Remote Reservoir shocks. Shock relocation brackets allow you to run your factory shocks with this lift. N3 shocks provide smooth performance with nitrogen-charged 10-stage variable valving. Vertex shocks feature 8-stage adjustability, and a nitrogen-charged monotube design. The remote reservoir increases fluid capacity, and reduces fade by dissipating heat. The Rough Country V2 shocks feature an aluminum body with a high-pressure monotube construction.

Wrangler JK: The Rough Country 4in Suspension Lift Kit designed for use with two door Jeeps. The coil springs were specifically tuned for the Wrangler JK, and this kit is not compatible with four door models. If your Jeep is a 2012 or newer with a 3.6L engine, then you will need exhaust spacers to avoid interference with the front driveshaft.

Run Larger Wheels and Tires: The Rough Country 4in Suspension Lift Kit allows you to fit 35x12.50 on your two door Jeep. You will also need between 4.5” and 4.75” of backspacing, so if you are using factory wheels, then you will need 1.5” wheel spacers.

Installation Notes
Installation Difficulty:
Skill Level 3 -
Advanced
Drilling Required for Installation Rough Country Recommends 4.5-4.75in of Backspacing Factory Wheels will Require 1.5in Wheel Spacers Wranglers with 3.6L Engines Require Exhaust Spacers
Installation Time: 4-5 hours
Installation Instructions Available
Parts Included
Front Coil Spring Pair
Rear Coil Spring Pair
Rear Coil Spring Correction Plate Pair
Front N3 Shocks or Vertex Remote Reservoir Shocks (Select from Dropdown Menu)
Rear N3 Shocks or Vertex Remote Reservoir Shocks (Select from Dropdown Menu)
Pitman Arm
Front Brake Like Relocation Brackets
Rear Brake Line Relocation Brackets
Front Track Bar Drop Bracket
Rear Track Bar Drop Bracket
Rear Sway Bar End Link Pair
Installation Hardware
Warranty
Limited Lifetime Warranty

Specifications

• Features: Short Arm
• Shocks Included: With Shocks
• Max Tire Size: 35
• Lift Height Range: 3 - 4.5 inch
• Included Parts: Brake Line Brackets, Coil Spacer, Coil Springs, Front Track Bar Bracket, Hardware, Pitman Arm, Rear Track Bar Bracket, Sway Bar Drop Brackets or Brake Line Brackets, Coil Spacer, Coil Springs, Front Track Bar Bracket, Hardware, Pitman Arm, Rear Track Bar Bracket, Sway Bar Endlinks

Fitment

• 2018 Jeep Wrangler 2-Door (JK)
• 2017 Jeep Wrangler 2-Door (JK)
• 2016 Jeep Wrangler 2-Door (JK)
• 2015 Jeep Wrangler 2-Door (JK)
• 2014 Jeep Wrangler 2-Door (JK)
• 2013 Jeep Wrangler 2-Door (JK)
• 2012 Jeep Wrangler 2-Door (JK)
• 2011 Jeep Wrangler 2-Door (JK)
• 2010 Jeep Wrangler 2-Door (JK)
• 2009 Jeep Wrangler 2-Door (JK)
• 2008 Jeep Wrangler 2-Door (JK)
• 2007 Jeep Wrangler 2-Door (JK)