Skyjacker Rear ADX 2.0 Adventure Series Aluminum Reservoir Shock Absorber for 07-18 Jeep Wrangler JK

Skyjacker’s Rear ADX 2.0 Adventure Series Remote Reservoir Aluminum Monotube Shocks for Jeep Wrangler JK 2-Door & Wrangler JK Unlimited 4-Door with lift kits starting from 2.5-7" of lift provides consistent dampening, high-end performance, cooler running, more control, and improved driving comfort. Skyjacker’s ADX 2.0 shocks dampen out (control) the unwanted oscillation motion to improve handling and ride quality. ADX 2.0 will optimize your suspension by keeping your tires in contact with the terrain. This Shock is engineered for higher speed applications, but also the remote reservoir shocks still perform if your Jeep is at a crawl speed. The external remote reservoir separates the nitrogen gas from the oil with an Internal Floating Piston (IFP). ADX 2.0 constant controlled resistance performance prevents lag (decline) or fade (failure). The high-pressure nitrogen gas and IFP technology combine to create the fastest responding shock ever. The separate reservoir allows more room in the shock cylinder to increase the oil capacity. The large bore size design reacts quicker and creates the smoothest ride possible. The Teflon banded piston’s smooth reaction delivers a superior ride and adds stability on any terrain. Impact extruded CNC machined T6061-T6 aluminum monotube dissipates heat and runs cooler versus traditional steel-bodied shocks. The overall weight of the aluminum body and aluminum remote reservoir setup is lighter too. The superior construction of Skyjacker’s ADX 2.0 will conquer off-road and on-road challenges through all manner of terrain, obstacles, and extreme weather. Load up your Jeep with confidence on your next adventure to the far end of the trail and back again with the Skyjacker’s ADX 2.0 Adventure Series Remote Reservoir Aluminum Monotube Shocks.

Additional Details

Fitment: 2007-2018 Jeep Wrangler JK 4WD

A2067 Extended Length (in): 26.86

A2067 Collapsed Length (in): 16.49

A2087 Extended Length (in): 28.60

A2087 Collapsed Length (in): 17.49

Impact Extruded: CNC machined 6061-T6 aluminum with clear anodize finish.

Bore Size: Large 46mm (1.811 in.) bore size of the monotube and reservoir.

Pistons: Smooth reaction Teflon banded pistons

Controlled Resistance: ADX 2.0 shock technology provides constant controlled resistance performance.

Valve System: Factory set, vehicle-specific full displaced valve system and consistent dampening.

100% Bolt-on; Direct fit.

Corrosion Resistance: Provides superior corrosion resistance & heat dissipation.

Ride Performance: Reacts quicker & creates the smoothest ride possible and adds stability on various terrains.

Installation Notes
Installation Difficulty:
Skill Level 2 -
Intermediate
Installation Time: 1-2 hours
Parts Included
Qty (1) Shock (select for amount of lift)
Warranty
Limited Lifetime Warranty

Fitment

• 2018 Jeep Wrangler 2-Door (JK)
• 2017 Jeep Wrangler 2-Door (JK)
• 2016 Jeep Wrangler 2-Door (JK)
• 2015 Jeep Wrangler 2-Door (JK)
• 2014 Jeep Wrangler 2-Door (JK)
• 2013 Jeep Wrangler 2-Door (JK)
• 2012 Jeep Wrangler 2-Door (JK)
• 2011 Jeep Wrangler 2-Door (JK)
• 2010 Jeep Wrangler 2-Door (JK)
• 2009 Jeep Wrangler 2-Door (JK)
• 2008 Jeep Wrangler 2-Door (JK)
• 2007 Jeep Wrangler 2-Door (JK)
• 2018 Jeep Wrangler Unlimited 4-Door (JK)
• 2017 Jeep Wrangler Unlimited 4-Door (JK)
• 2016 Jeep Wrangler Unlimited 4-Door (JK)
• 2015 Jeep Wrangler Unlimited 4-Door (JK)
• 2014 Jeep Wrangler Unlimited 4-Door (JK)
• 2013 Jeep Wrangler Unlimited 4-Door (JK)
• 2012 Jeep Wrangler Unlimited 4-Door (JK)
• 2011 Jeep Wrangler Unlimited 4-Door (JK)
• 2010 Jeep Wrangler Unlimited 4-Door (JK)
• 2009 Jeep Wrangler Unlimited 4-Door (JK)
• 2008 Jeep Wrangler Unlimited 4-Door (JK)
• 2007 Jeep Wrangler Unlimited 4-Door (JK)