Synergy MFG Suspension Systems use a synergistic approach, meaning the combined effect of the components is greater than the sum of the individual parts. The overall performance of the system is the most important factor when we are designing components to work together. Synergy MFG Suspension Systems are complete systems for your vehicle and include all necessary components for the lift height and performance advertised.
The Jeep Gladiator JT Starter System is a coil spring 2-inch lift designed around 37-inch tires for Rubicon models and 35-inch tires for non-Rubicon models. This system is designed to be the most capable performance coil spring lift on a budget, with room to upgrade as funds allow.
Benefits:
Budget coil spring suspension system to easily fit larger tires Improved off road and on road performance Includes all components necessary to get you on the trail Complete Bolt-on System for easy install Compatible with OEM wheels No maintenance required for all included components Lifetime Warranty on all hard parts Fully upgradeable to higher level systems
Features:
Multi-rate, progressively wound coil springs increase lift height to 1 & 2 inches over stock. Front and rear coil springs are all new and have been designed specifically for the JT platform. Like OEM, the coil springs are unique lengths for each corner of the vehicle to compensate for weight distribution and prevent leaning. Longest in class free length prevents coil springs from coming unseated at full articulation and coil spring block height has been designed around optimal bump stop spacing for the lift height and tire size. Industry first "closed and ground" front coil springs ensure perfect fitment with the included front lower coil spring isolators. Our coil springs are guaranteed to resist bowing and have a lifetime guarantee against sagging/breakage. Front and rear bump stop spacer kits are included to provide the necessary clearance required for larger tires. front bump stop spacing is adjustable from 2-4 inches in 1-inch increments without having to remove any hardware. Front and Rear sway bar link relocation brackets maintain factory sway bar geometry to allow full articulation of the suspension and maintain compatibility with stock wheels. Suspension components feature an abrasion-resistant powder coat finish for maximum durability and corrosion resistance. 100% bolt on components assure an easy, trouble free installation with the use of basic hand tools.
Notes:
If using Stock Shocks, this kit MUST be used with JT Shock Relocation Brackets. If installing on a DIESEL Jeep Gladiator, Synergy Jeep Gladiator Rear Sway Bar Links MUST be used Instead of rear Sway Bar Drop Brackets. Synergy MFG coil springs lift the vehicle the advertised height over stock based on a fully loaded JT Rubicon. Other JT models will see more lift over stock. These coil springs do not lift taller than advertised. The stock rake based off the Rubicon model is kept retaining its load carrying capacity. If you prefer the vehicle to sit level when unloaded, we recommend adding a small coil spacer to the front (up to 3/4 inch without affecting up travel or causing coil bind). Synergy MFG is not responsible for maintaining finish of products. Environmental factors will affect rate of corrosion and wear for items advertised to be corrosion resistant. We recommend using protective coatings for all items that will see extended outdoor and off-road use. We have had great experience with the Fluid Film product and recommend it and similar products for any items susceptible to damage from corrosion. It is great for keeping double adjuster assemblies working like new and protecting shock bodies from the elements.
Product Specifications
