Description
TeraFlex JK Front Tera30 Replacement Axle Housings include a heavy-duty housing with axle tubes, bracketry, and forged inner knuckles, pre-installed inner seals and upper control arm bushings as well as ARB air locker, Spicer ring & pinion, Spicer bearings and install kits, TeraFlex HD ball joints, and factory yoke.
Simply swap over axle shafts, outer knuckles, outer axle assembly, unit bearings, brakes and sensors. The comprehensive assembly makes swapping axle housing a true DIY process!
TeraFlex heavy-duty JK Front Tera30 Replacement Axle Housings are perfect for replacing bent, broken, or damaged front axles in JK Wrangler and Rubicon vehicles. Can also be used as a direct bolt-on upgrade for JK Wrangler owners looking to beef up the front axle’s weak areas.
LIFT HEIGHT: 0-3”
WIDTH: 67” WMS-WMS (stock)
AXLE TUBE: 3.25” x 0.25”
RING & PINION: 4.10
Includes:
Features & Benefits:
Notes:
Below is a list of Requirements & Recommendations for TeraFlex axle housings as budget and build preference allows.
Questions? Stop scratching your head and contact us! We know our axles AND we’re here to help!
Requirements & Recommendations:
CONTROL ARM UPGRADE
• 0-3” LIFT: This axle is a direct bolt-on upgrade! Although stock control arms will work at this lift height, aftermarket flexarms may be used if desired – highly recommended w/ a 3” lift.
Front upper (# 1252200) & front lower (# 1252000) TeraFlex JK Sport Flexarms will work w/ 2.5-3” lifts.
Front upper (# 1415520) & front lower (# 1415500) TeraFlex JK adjustable Alpine Flexarms will work w/ 2.5-4” lifts.
Front upper (# 1315520) & front lower (# 1315500) TeraFlex JK adjustable Alpine Long Flexarms will work w/ 3-6” lifts.
AXLE SHAFT UPGRADE
• 0-6” LIFT: High-quality aftermarket axle shafts will enhance your set up. We recommend “RCV” or “TEN Factory” high-end shafts. Stock Rubicon axle shafts may also be reused.
AXLE SHAFT TUBE SEAL UPGRADE
• 0-6” LIFT: Get serious with HD 0.5” wall seals (# 4354050) or keep it real with standard 0.25” wall seals (# 4354025). Stock seals may also be reused.
STEERING SYSTEM UPGRADE
• 0-3” LIFT: The JK HD Tie Rod & Drag Link Steering Kit (# 1853900) will do the trick, though the stock steering system may be reused.
BRAKE UPGRADE
• 0-6” LIFT: Experience a notable difference w/ a TeraFlex Big Brake Kit (# 4303400 or # 4303420) or JK Big Rotor Kit (# 4303480 or # 4303490).
Product Specifications
- Axle Type: Dana 30
- Ratio: 4.10
- Tubing Diameter: 3.25in
- Width: 67in
