XF Offroad XF-239 Wheels | 5x5

Dual-Pattern Fitment for Classic and Modern Platforms The XF Offroad XF-239 is a 22x10 truck wheel drilled for two distinct bolt-pattern groups: 5x127 (5x5) and 5x139.7 (5x5.5). The 5x127 pattern covers Jeep Wrangler (2007-2026), Jeep Grand Cherokee (1999-2026), and older Chevrolet half-ton platforms including the Tahoe (1995-1999), C1500 (1988-1999), and GMC Yukon (1992-1999). The 5x139.7 pattern opens the XF-239 to older Ford F-150, Bronco, and E-Series trucks, pre-2002 Dodge Ram 1500, Jeep Wagoneer and Cherokee XJ, and similar classic 5-lug truck applications, among 32 total verified fits across both patterns. The 78.10mm hub bore fits these platforms, and the 4.79 inches of backspacing positions the mounting surface for the -18mm offset this wheel runs. Gloss Black with Milled Spoke Accents The finish is a gloss black base with milled spoke accents that cut through to the raw aluminum beneath, creating a two-tone contrast across the face. The milling is precise and intentional, tracing the spoke geometry to highlight the wheel's structure rather than covering it. Exposed lug hardware sits in a circle around the hub bore, visible on the face and adding a functional, hardware-forward look to the overall design. The directional face geometry gives the wheel a sense of motion even at rest, and the outer lip adds depth to the profile when viewed from the side. Concave Face, Multi-Spoke Design The XF-239 runs a concave face, pulling the spoke plane inward and pushing the outer lip forward for a deep, dimensional look. The multi-spoke layout distributes the visual weight across the face without crowding the design, keeping the milled accents readable against the gloss black. At 22 inches in diameter and 10 inches wide, the wheel has the scale to fill out a full-size truck or Wrangler build without relying on extreme proportions to make its presence felt. One-Piece Alloy Construction XF Offroad builds the XF-239 as a one-piece alloy wheel, a construction that suits the complex concave geometry and milled spoke detail this design demands. One-piece casting supports the deep spoke profile and contoured face in a single continuous shape, keeping the structural integrity intact across the full diameter. At 46.98 lbs, the wheel carries the weight appropriate for a 22-inch one-piece alloy at this scale. A center cap is included. Offset and Stance The -18mm offset places the mounting surface rearward of the wheel's centerline, pushing the face outward for a more aggressive, outboard stance than a neutral or positive offset would produce. On a 10-inch-wide wheel at 22 inches, this combination delivers a planted, wide-track look suited to lifted Wrangler and full-size truck builds. The XF-239 is also offered in additional sizes, finishes, and bolt-pattern options across the XF Offroad lineup for builds with different fitment requirements.