XF Offroad XF-239 Wheels | 8x6.5

Heavy-Duty Bolt Patterns, One Aggressive Wheel The Ram 2500 and heavy-duty GM and Ford platforms that run 8-lug bolt patterns have a wheel built specifically for them in the XF Offroad XF-239. This 20x10 is dual-drilled for both 8x165.1 (8x6.5) and 8x170, covering Ram 2500 owners from 1994 through current 2027 models, Chevrolet Silverado 2500 HD and GMC Sierra 2500 HD (2001-2010), and Ford Super Duty F-250 and F-350 (1999-present) on the 8x170 side. The 125.2mm hub bore fits these heavy-duty platforms, and the 4.56 inches of backspacing positions the mounting surface for proper clearance on these applications. Verified fitment spans 99 platforms in total, with 10 additional verified fits beyond the primary list. Gloss Black with Red Machined Spoke Faces The finish on the XF-239 is a Gloss Black with Red Machined Spoke Faces. The spoke faces are machined down to a bright, contrasting red accent that cuts through the gloss black surrounding surfaces, giving the wheel a two-tone look that is sharp and intentional on dark or color-matched truck builds. The concave face adds visual depth, pulling the spoke faces inward and giving the wheel a layered profile when viewed from the front. Exposed lug hardware sits in a circle around the hub bore at the center of the face, adding a functional, hardware-forward detail to the overall look. A center cap is included with this wheel. Directional Cast Construction XF Offroad built the XF-239 as a one-piece alloy casting, a construction that supports the complex concave geometry and multi-spoke design without compromising structural integrity across the load demands of heavy-duty truck platforms. Cast alloy handles the deep spoke profiles and contoured face geometry in a single continuous form, keeping the design's visual depth intact through every load cycle. At 37 lbs, the wheel sits within the expected range for this size and construction. The XF-239 is also a directional wheel, meaning the spoke sweep is oriented for a specific rotational direction, so left and right side fitment matters when mounting. Fitment for 8x165.1 and 8x170 Platforms At -24mm offset, the mounting surface sits rearward of the wheel's centerline, pushing the wheel outward for a more aggressive, outboard stance than a neutral or positive offset would produce. On a 10-inch-wide barrel, that combination qualifies as a genuinely wide, aggressive fitment that fills the fender arch on lifted heavy-duty trucks. The XF-239 is also offered in additional sizes, widths, and finishes across the XF Offroad lineup, covering a range of bolt patterns and build goals for truck owners who need a different fit.