XF Offroad XF-246 Wheels | 5x5

Dual-Drilled for Jeep and Classic Truck Platforms The XF Offroad XF-246 covers two distinct bolt-pattern groups in a single wheel: 5x127 (5x5) and 5x139.7 (5x5.5). That dual-drilled setup opens fitment to Jeep Wrangler (2007-2026), Jeep Grand Cherokee (1999-2026), Chevrolet Tahoe (1995-1999), Chevrolet C1500 (1988-1999), GMC Yukon (1992-1999), and 10 additional verified platforms across both patterns. The 78.10mm hub bore fits these applications, and the 0mm offset places the mounting surface exactly at the wheel's centerline, keeping the wheel positioned squarely within the fender arch. At 20x9 inches with 5 inches of backspacing, this is a well-proportioned size for builds running leveling kits or moderate lifts across these platforms. Split Eight-Spoke Design with Milled Edges The XF-246 runs a split eight-spoke layout with a concave face profile. Each pair of spokes fans outward from the hub in a split pattern, giving the face visual depth and a layered look that suits the scale of a 20-inch wheel. The spoke edges are milled to a bright contrast against the gloss black finish, creating a two-tone effect that adds definition without relying on chrome or polished surfaces. The concave dish pulls the face inward, adding shadow and dimension to the overall profile. A center cap is included with this wheel, covering the lug hardware for a clean, finished look at the hub. One-Piece Alloy Construction XF Offroad built the XF-246 as a one-piece cast alloy wheel, a construction that supports the complex spoke geometry and concave face profile in a single continuous shape. Cast alloy handles the deep spoke contours and the inward dish without requiring assembly joints, keeping the structural integrity of the design intact across the full load cycle. At 41.67 lbs, the wheel carries the mass appropriate for a 20-inch one-piece alloy at this size. XF Offroad's advanced casting process, developed since the brand's founding in 2017, supports the detailed spoke geometry the XF-246 demands. Fitment Across 5x127 and 5x139.7 Applications Jeep Wrangler JK and JL owners running the 5x127 bolt pattern get a 20x9 at 0mm offset, a neutral position that works across stock, leveled, and lifted setups without pushing the wheel aggressively outboard. The same wheel covers 5x139.7 (5x5.5) platforms including classic Ford F-150, Dodge Ram 1500 (pre-2002), Jeep Wagoneer, Cherokee XJ, and similar five-lug truck applications. With 32 total verified fits across both patterns, the XF-246 serves a wide range of builds. The wheel is also offered in additional sizes, widths, and finish options across the XF-246 lineup for builds with different fitment needs.