null
Exclusive Discounts! Add To Cart For Best Pricing!

Ford Bronco Guides

Everything we've learned fitting parts on 2021 and newer Ford Broncos: wheel and tire fitment, lift kits, bumpers, winches, lighting and performance, with specs checked against Ford data and 63 owner-reported Bronco builds.

Last Updated: Oct 4, 2026Vehicle: Ford Bronco (2021+)7 GuidesBy Austin, owner of Offroad Source

Quick Specs

The 2021+ Ford Bronco uses a 6x5.5 in (6x139.7 mm) bolt pattern, a 93.1 mm center bore and M12x1.5 lug nuts. The Bronco Raptor is different: 6x135 mm, 87.1 mm bore and M14x1.5 lugs. Sasquatch Broncos come on 35 inch tires (315/70R17) on 17x8.5, +30 offset wheels. Non-Sasquatch Broncos top out at 33s from the factory, and most owners add a leveling kit and lower-offset wheels for 35s. For 37s, plan on a 3 inch lift or more, plus trimming.

1. Ford Bronco Guides

2. Ford Bronco Wheel & Tire Specs

SpecFord Bronco (2021+)Bronco Raptor
Bolt pattern6x5.5 in (6x139.7 mm)6x135 mm
Center bore93.1 mm87.1 mm
Lug threadM12x1.5M14x1.5
Factory wheel16, 17 or 18 in by trim; +55 offset on non-Sasquatch wheels; Sasquatch 17x8.5, +30, beadlock capable17x8.5, +34 offset
Factory tires255/70R16 (about 30 in) up to 315/70R17 (about 34.4 in) on Sasquatch37x12.50R17
Most common aftermarket wheel in our build data17x8.5, 0 offset, followed by 17x9, -12Raptor-specific wheels only

Lug nut torque: use the spec in your owner's manual, and re-torque after the first 50 to 100 miles on new wheels. Full details are in the Wheel Fitment Guide.

3. Tire Size by Lift Height

This is the short version, from 63 owner-reported Bronco builds (2022 to 2025, Raptor not included). The Tire Size Guide has the full table.

Setup35 in tires37 in tires
Stock, SasquatchFactory size (315/70R17)Plan on lift and trimming
Stock, non-SasquatchNeeds lower-offset wheels; most owners level firstNot recommended
Leveling kitMost common route: 12 of 15 builds reported no rubbing, about half trimmed2 builds, no rubbing, 1 trimmed
2 to 2.5 in lift8 builds, no rubbing, 6 trimmed2 builds, both rubbed
3 in lift and up7 builds, 1 rubbedMost common route; expect some trimming

Lift height alone never guarantees a tire size: wheel offset, tire width and trimming all matter. 12.50 in wide tires are the clean choice; every 13.50 in wide build in our data rubbed or needed trimming. See the Lift Kit Guide.

4. Trims & Details That Change Fitment

Sasquatch vs non-Sasquatch

The Sasquatch package is the biggest factor in Bronco fitment. Sasquatch trucks come with 35s, 17x8.5 +30 wheels, a higher ride height and shorter gearing. Non-Sasquatch trucks sit lower, use +55 offset wheels that tuck the tire toward the suspension, and have taller gearing for 30 to 33 in tires. Wheels alone don't make a Sasquatch.

Bronco Raptor

The Raptor is its own platform: a different bolt pattern, a track about 8 in wider, 37s from the factory, HOSS 4.0 Fox Live Valve shocks and the 3.0L EcoBoost. Only buy parts listed for the Bronco Raptor.

HOSS suspension level

HOSS 1.0 uses twin-tube shocks, HOSS 2.0 Bilstein monotubes with piggyback reservoirs, HOSS 3.0 Fox 2.5 internal-bypass shocks, and HOSS 4.0 is Raptor only. If you have HOSS 3.0, a perch-collar lift keeps the Fox shocks. HOSS availability has changed by year, so check your window sticker.

Standard, Capable or Modular front bumper

Ford builds the Bronco with a plastic standard bumper, a steel Capable bumper and a steel Heavy-Duty Modular bumper. Only the Modular bumper is winch-ready. Your bumper also decides which fog lights fit. If you have adaptive cruise, pick a bumper with a radar relocation bracket.

Factory AUX switches

Broncos with the auxiliary switch package have up to six overhead switches with pre-run wiring. Owners report AUX 1 and 2 carry the most current, so put light bars there or run them through a relay. Winches connect straight to the battery, never to an AUX switch.

2.3L, 2.7L or Raptor 3.0L engine

Ford rates the 2.3L EcoBoost I-4 at 275 to 300 hp, the 2.7L EcoBoost V6 at 315 to 330 hp and the Raptor's 3.0L EcoBoost V6 at 418 hp. Tunes, intakes, intercoolers and exhausts don't interchange between engines, and some parts change by model year.

5. Where to Start: Build Paths

Daily driver

  1. A 2 inch leveling kit and 35s on 17x8.5, 0 offset wheels (Lift Kit Guide)
  2. LED headlights and interior lights (Lighting Guide)
  3. A tune or calibration to correct the speedometer for the new tire size (Performance Guide)

Weekend trail

  1. Better shocks or springs with 35s, or a 3 inch lift for 37s (Tire Size Guide)
  2. A steel winch bumper with adaptive cruise provision, or a winch on your Modular bumper (Bumper & Armor Guide)
  3. Rock sliders, skids and recovery gear (Winch & Recovery Guide)

Overland

  1. A lift with springs or a level that handles the added bumper and gear weight
  2. Front winch bumper, rear bumper with tire carrier and a 10,000 to 12,000 lb winch
  3. Modular bumper fog pocket lights and A-pillar ditch lights on the AUX switches (Lighting Guide)

Shop All Ford Bronco Parts →

6. Frequently Asked Questions

What is the Ford Bronco bolt pattern?

The 2021+ Ford Bronco uses a 6x5.5 inch (6x139.7 mm) bolt pattern with a 93.1 mm center bore and M12x1.5 lug nuts. The Bronco Raptor is different: 6x135 mm with an 87.1 mm bore and M14x1.5 lugs.

What is the biggest tire that fits a stock Ford Bronco?

Sasquatch Broncos run 35 inch tires (315/70R17) from the factory. Non-Sasquatch Broncos come on tires up to about 33 in, and most owners add a leveling kit and lower-offset wheels before going to 35s.

What size lift do I need for 37s on a Bronco?

Plan on a 3 inch lift or more. In our build data, 5 of 14 Broncos on 37s reported rubbing, so pair the lift with the right wheel offset and expect some trimming.

Do Bronco Raptor parts fit a regular Bronco?

Generally no. The Raptor has a different bolt pattern, a wider track, its own suspension and the 3.0L engine, so wheels, suspension and performance parts are Raptor-specific. Always check the listing for your exact model.

Can I put a winch on my factory Bronco bumper?

Only on the factory Heavy-Duty Modular bumper. The plastic standard bumper and the steel Capable bumper aren't winch-ready, so you'll need a winch bumper. A 10,000 lb winch like the WARN VR EVO 10-S covers most Broncos.

What are the AUX switches on a Bronco for?

They're factory switches with pre-run wiring for accessories like light bars, ditch lights and rock lights. Owners report AUX 1 and 2 carry the most current. Use a relay for large lights, and never wire a winch to them.

7. Sources & Technical References

Not sure what fits your Bronco? Call 419-670-3141 or email sales@offroadsource.info with your trim and package for a free fitment check.