Jeep Wrangler JL Guides
Everything we've learned fitting parts on Jeep Wrangler JLs: wheel and tire fitment, lift kits, bumpers, winches, lighting and performance, with specs checked against factory data and real owner builds.
Quick Specs
The Jeep Wrangler JL (2018 to present) uses a 5x5 in (5x127 mm) bolt pattern, a 71.5 mm center bore and M14x1.5 lug nuts torqued to 130 ft-lb. Sport and Rubicon factory wheels are 17x7.5 with a +44.45 mm offset. Rubicons commonly run 35s on stock suspension for street and mild trail use; Sport, Sahara and Willys models usually need a lift and lower-backspacing wheels for 35s. A 10,000 lb winch covers most JLs, with 12,000 lb for heavy 4xe and 392 builds.
Table of Contents
1. Jeep Wrangler JL Guides
2. Jeep Wrangler JL Wheel, Tire & Engine Specs
| Spec | Jeep Wrangler JL (2018+) |
|---|---|
| Bolt pattern | 5x5 in (5x127 mm) |
| Center bore | 71.5 mm |
| Lug thread | M14x1.5 |
| Lug nut torque | 130 ft-lb |
| Factory wheel, Sport and Rubicon | 17x7.5, +44.45 mm offset |
| Factory tire, Rubicon | 285/70R17 (about 32.7 in) |
| Factory tire, Xtreme Recon and Moab 392 | 315/70R17 (about 34.4 in) |
| GVWR range (2025) | 5,100 lb (Sport 2-door) to 6,600 lb (Rubicon 4xe) |
| Engines | 2.0L turbo (270 hp), 3.6L V6 (285 hp), 4xe plug-in hybrid (375 hp), 6.4L V8 392 (470 hp) |
Full details are in the Wheel Fitment Guide, Tire Size Guide and Performance Guide.
3. Tire Size by Lift Height
This is the short version. A lift height never guarantees a tire fits: wheel backspacing, tire width and how hard you flex still decide rubbing.
| Setup | 35 in tires | 37 in tires |
|---|---|---|
| Stock, Rubicon | Common for street and mild trail; check full lock and full flex | Not the usual route |
| Stock, Xtreme Recon | Factory size | Many owners run them; some report liner contact at full flex |
| Stock, Sport, Sahara or Willys | Usually needs a lift and wheel changes | Not recommended |
| Leveling kit / 1 to 2 in | Rubicons; 33s on other trims | – |
| 2.5 in lift | Any trim, with the right wheels | Some Rubicons |
| 3.5 in lift | Fits | The usual route, with control arms, track bars and bump stops |
See the Lift Kit Guide for supporting parts.
4. Trims & Details That Change Fitment
Sport, Sahara and Willys vs Rubicon
Rubicons have more fender clearance, so they run 35s with less lift. Sport, Sahara and Willys models sit lower in the fenders and usually need a lift for 35s. Trim also changes weight, which matters when you size a winch.
Xtreme Recon
The Xtreme Recon package adds 35s on 17x8 beadlock-capable wheels, a small factory lift, a spare tire relocation kit and tailgate hinge reinforcement. Many XR owners step up to 37s.
Plastic vs steel front bumper
Many JLs have a plastic front bumper that can't carry a winch by itself; the factory steel bumper can. The two bumpers also use different fog lights. A steel bumper and winch can drop the front about an inch, so plan springs for the weight.
Blind-spot sensors in the tail lights
The JL's blind-spot sensors sit inside the factory tail lights. Pick aftermarket tail lights built to hold them and move the sensors over during install.
2.0L, 3.6L, 4xe and 392
Each engine uses its own performance parts, and the 4xe and 392 are heavier with their own suspension, so check that lift kits, skid plates and exhausts list your exact model. The 3.0L EcoDiesel (2020 to 2023) uses its own parts too.
5. Where to Start: Build Paths
Daily driver
- 33s, or 35s on a Rubicon, with a leveling kit if needed (Tire Size Guide)
- LED headlights (Lighting Guide)
- Speedometer calibration for the bigger tires (Performance Guide)
Weekend trail
- A 2.5 in lift with 35s on 17x8.5 or 17x9 wheels (Lift Kit Guide)
- A winch on the factory steel bumper or a stubby winch bumper (Bumper & Armor Guide)
- Rock sliders, skids and recovery gear (Winch & Recovery Guide)
37s and overland
- A 3.5 in lift with springs rated for the extra weight
- Steel bumpers, a rear tire carrier, winch and full recovery kit
- Regear and brakes for the tire size (Performance Guide)
Shop All Jeep Wrangler JL Parts →
6. Frequently Asked Questions
What is the Jeep Wrangler JL bolt pattern?
The Wrangler JL uses a 5x5 inch (5x127 mm) bolt pattern with a 71.5 mm center bore and M14x1.5 lug nuts torqued to 130 ft-lb.
What is the biggest tire that fits a stock Jeep Wrangler JL?
It depends on trim. Rubicons commonly run 35s on stock suspension for street and mild trail use, Xtreme Recon trucks come on 35s and many owners step up to 37s, and Sport, Sahara and Willys models usually top out around 33s without a lift.
What size lift do I need for 37s on a JL?
About 2.5 in on many Rubicons for street and trail, and around 3.5 in for articulation-heavy builds, along with adjustable track bars, control arms, bump stop extensions and the right wheel backspacing.
What size winch do I need for a Jeep Wrangler JL?
A 10,000 lb winch covers most JLs by the 1.5 times GVWR rule. The heavier 4xe and 392 land just under 10,000 lb at stock GVWR, so 12,000 lb makes sense once they're built up.
Can I put a winch on the factory JL bumper?
On the factory steel bumper, yes. The plastic bumper needs a winch plate or a replacement winch bumper. Expect about an inch of front sag from a steel bumper and winch.
Do Jeep Gladiator parts fit the Wrangler JL?
Some do. The JL and Gladiator share wheels, headlights and many front-end parts, but the Gladiator's longer frame, bed and rear suspension mean lift kits, rear bumpers and tail lights are often vehicle-specific. Always check that a part lists the Wrangler JL.
7. Sources & Technical References
- Wheel, tire, lift and armor details: our Wheel Fitment, Tire Size, Lift Kit and Bumper & Armor guides, each with its own source list
- Engine ratings and factory tire sizes: Stellantis 2026 Jeep Wrangler specifications
- 2025 curb weights and GVWR: iSeeCars
- Xtreme Recon package contents: TFLcar
Not sure what fits your Wrangler JL? Call 419-670-3141 or email sales@offroadsource.info for a free fitment check.