null
Exclusive Discounts! Add To Cart For Best Pricing!

Ford Ranger Guides

Everything we've learned fitting parts on 2024 and newer Ford Rangers: wheel and tire fitment, leveling and lift kits, bumpers, winches, lighting and performance, with the 2.3L, 2.7L and Ranger Raptor kept separate and specs checked against Ford data and owner builds.

Last Updated: Oct 4, 2026Vehicle: Ford Ranger (2024+)7 GuidesBy Austin, owner of Offroad Source

Quick Specs

The 2024+ Ford Ranger uses a 6x139.7 mm (6x5.5 in) bolt pattern, a 93.1 mm center bore and M12x1.5 lug threads. XL, XLT and Lariat trucks come on 17x7.5 or 18x7.5 wheels with a +55 offset and about 31 in tires; the Ranger Raptor comes on 17x8.5 +30 wheels and LT285/70R17 tires (about 32.7 in) on a wider track. Standard trucks have limited tire clearance, so owners usually level and change offset for 32 to 33 in tires, while Raptor owners commonly step to 35s. Engines are the 2.3L EcoBoost (270 hp), 2.7L EcoBoost V6 (315 hp) and Raptor 3.0L twin-turbo V6 (405 hp).

1. Ford Ranger Guides

2. Ford Ranger Wheel, Tire & Weight Specs

SpecFord Ranger (2024+)
Bolt pattern6x139.7 mm (6x5.5 in), all trims including Raptor
Center bore93.1 mm
Lug threadM12x1.5
Lug nut torqueSee your owner's manual
Factory wheels, standard trucks17x7.5 or 18x7.5, +55 offset
Factory wheels, Raptor17x8.5, +30 offset
Factory tires, standard trucks255/70R17 or 255/65R18 (about 31 in)
Factory tires, RaptorLT285/70R17 (about 32.7 in)
Track width63.8 in standard; 67.3 in Raptor
GVWR6,050 to 6,170 lb (2.3L and 2.7L); 6,790 lb (Raptor)

Full details, including an offset chart, are in the Wheel Fitment Guide. Your exact GVWR and tire size are on the door-jamb stickers.

3. Tire Size by Setup

This is the short version, based on Ford specs and owner reports. The Tire Size Guide has the details.

Setup32 to 33 in tires35 in tires
Standard or FX4, stock32-class sizes are the usual first step; width and offset decide rubbingNot recommended
Standard or FX4, leveled with lower-offset wheelsCommonly run; check full lock for fender liner, bumper cover and mud flap contactNot recommended without major work
Raptor, stockFactory 285/70R17 (about 32.7 in)Owners commonly step up; check clearance
Raptor with small spacersFitsOne owner build runs 315/70R17 on +35 wheels with no trimming reported

Lift height never guarantees a tire fits. Tire width and wheel offset decide rubbing as much as height. See the Lift Kit Guide.

4. Trims & Details That Change Fitment

XL, XLT and Lariat

Standard trucks use an independent front suspension with coil-over struts and a leaf-sprung rear axle. XL and XLT come on 17s; Lariat comes on 18s. Equipment like fog lights, front parking sensors, the front camera and adaptive cruise radar varies by trim and package and changes which bumpers and lights fit.

FX4 Off-Road Package

FX4 adds off-road-tuned shocks, Trail Control, an electronic locking rear differential, all-terrain tires and a steel bash plate. Most parts fit FX4 and non-FX4 trucks alike, but shock-replacing lift kits should list FX4.

Ranger Raptor

The Raptor has FOX 2.5 in internal-bypass Live Valve shocks, forged aluminum front A-arms, a Watts-link coil rear, a wider track, 10.7 in of ground clearance and six overhead upfitter switches. Lift kits, bumpers, skids and performance parts are Raptor-specific.

2.3L vs 2.7L vs Raptor 3.0L

The 2.3L EcoBoost (270 hp, 310 lb-ft) is standard on XL, XLT and Lariat; the 2.7L EcoBoost V6 (315 hp, 400 lb-ft) is available on XLT and Lariat; the 3.0L twin-turbo V6 (405 hp, 430 lb-ft) is Raptor-only. Tunes, intakes, intercoolers and exhausts are engine-specific. See the Performance Guide.

2024+ vs earlier Rangers

This guide set covers the current generation that arrived for 2024 in the U.S. Don't assume a part for a 2019 to 2023 Ranger fits; check that it lists the 2024+ truck.

5. Where to Start: Build Paths

Daily driver

  1. A front leveling kit and a 32-class all-terrain tire (Lift Kit Guide)
  2. SAE fog lights, reverse lights and a headlight re-aim (Lighting Guide)
  3. The Ford Performance calibration on 2.3L trucks, plus speedometer correction (Performance Guide)

FX4 trail truck

  1. Coilovers and lower-offset 17 in wheels with 33-class tires (Wheel Fitment Guide)
  2. A hidden winch mount or winch bumper with a 10,000 lb winch (Bumper & Armor Guide)
  3. Skids, rock sliders and recovery gear (Winch & Recovery Guide)

Raptor desert build

  1. Raptor spacers, upper control arms and 35s on 17x8.5 wheels
  2. Aluminum winch bumper, skids and sliders
  3. A light bar and ditch lights on the factory upfitter switches

Shop All Ford Ranger Parts →

6. Frequently Asked Questions

What is the Ford Ranger bolt pattern?

The 2024+ Ford Ranger uses a 6x139.7 mm (6x5.5 in) bolt pattern with a 93.1 mm center bore and M12x1.5 lug threads. The Raptor uses the same pattern.

What is the biggest tire that fits a stock Ford Ranger?

Standard Rangers come on about 31 in tires and have limited clearance, so owners usually level and change wheel offset before going to 33-class sizes. The Raptor comes on 285/70R17s (about 32.7 in), and owners commonly step to 35s.

Do standard Ranger parts fit the Ranger Raptor?

Wheels with the same 6x139.7 pattern do, but lift kits, bumpers, skid plates and performance parts are Raptor-specific. Always check that a part lists the Raptor.

What size winch do I need for a Ranger?

About 1.5 times your GVWR. A 10,000 lb winch covers 2.3L and 2.7L Rangers; the Raptor works out to about 10,200 lb, so some owners step up to 12,000 lb for margin.

Does the Ranger have upfitter switches?

The Ranger Raptor has six upfitter switches in the overhead console. For other trims, check your truck; if it has none, wire lights through a fused relay harness and switch.

Do 2019 to 2023 Ranger parts fit a 2024+ Ranger?

Don't assume they do. The 2024 Ranger is a new generation, so check that every part lists the 2024+ model.

7. Sources & Technical References

Not sure what fits your Ranger? Call 419-670-3141 or email sales@offroadsource.info for a free fitment check.