null
Exclusive Discounts! Add To Cart For Best Pricing!

Ford F-250 Super Duty Guides

Everything you need to plan parts for a 2023+ Ford F-250 Super Duty: wheel and tire fitment, leveling and lift kits, winch bumpers, heavy-duty winches, lighting and emissions-compliant performance, with specs checked against Ford's data and owner reports.

Last Updated: Oct 4, 2026Vehicle: Ford F-250 Super Duty (2023+)7 GuidesBy Austin, owner of Offroad Source

Quick Specs

The 2023+ Ford F-250 Super Duty uses an 8x170 mm bolt pattern with a 124.9 mm center bore. Factory wheels are 17x7.5, 18x8 or 20x8 at about +40 offset, on Load Range E tires from LT245/75R17 up to LT285/75R18 on the Tremor package. Owners commonly run 35s at stock height or with a 2 to 2.5 in leveling kit; Tremor owners report 37s with little or no modification. Ford lists F-250 GVWRs from 10,000 to about 11,400 lb, so a winch around 16,500 lb is the right size for most trucks.

1. Ford F-250 Super Duty Guides

2. Ford F-250 Super Duty Wheel, Tire & Engine Specs

SpecFord F-250 Super Duty (2023+)
Bolt pattern8x170 mm
Center bore124.9 mm
Lug thread and torqueCheck your owner's manual
Factory wheels17x7.5, 18x8, 20x8; about +40 offset
Factory tiresLT245/75R17 to LT285/75R18, Load Range E
Front suspension4x4: solid front axle (mono beam) on coils; 4x2: twin I-beam
Engines6.8L gas, 7.3L gas, 6.7L Power Stroke, 6.7L High Output Power Stroke
GVWR10,000 to about 11,400 lb depending on configuration
Upfitter switchesSix listed by Ford (equipment varies)

Full details are in the Wheel Fitment Guide and Performance Guide.

3. Tire Size by Setup

This is the short version, based on owner reports. The Tire Size Guide has the details.

Setup35 in tires37 in tires
Stock, non-TremorCommonly runOwners report rubbing at full lock
Stock, TremorFactory (LT285/75R18, about 34.8 in)Owners report 37x12.50R18 with little or no rubbing
2 to 2.5 in leveling kitFits with the right wheel specPossible; slight full-lock rubbing reported, depends on offset
4 to 6 in liftFitsCleanest route; maker specs list 37s on 9 in wheels

Leveling kits and lifts are engine- and package-specific on the F-250. See the Lift Kit Guide.

4. Trims & Details That Change Fitment

Tremor package

The Tremor sits higher in front and comes on LT285/75R18 all-terrains. That's why Tremors fit 37s more easily, and why many standard leveling kits either exclude the Tremor or give it much less lift. Buy Tremor-specific suspension parts.

Diesel vs gas

The 6.7L diesel puts much more weight on the front axle than the 6.8L or 7.3L gas engines. Spring-based leveling kits are often diesel-only or list a different lift for gas trucks, and the extra weight matters when you add a winch bumper. Performance parts are engine-specific, and diesel parts must be emissions-compliant.

4x4 vs 4x2

4x4 trucks use a solid front axle with radius arms and a track bar; 4x2 trucks use a twin I-beam front end. Most lift and leveling kits are 4x4-only.

Adaptive cruise, cameras and sensors

Depending on options, the front end can hold an adaptive cruise radar, front camera and parking sensors. Aftermarket bumpers handle these differently, and many need a radar relocation bracket. See the Bumper & Armor Guide.

Onboard Scale option

Trucks with Ford's Onboard Scale option may need a separate headlight bracket with some leveling kits. Check the kit's notes.

5. Where to Start: Build Paths

Tow rig

  1. Load Range E 35s on factory or 9 in wheels (Tire Size Guide)
  2. Reverse and bed lighting (Lighting Guide)
  3. A temperature monitor and brakes (Performance Guide)

Leveled daily driver

  1. A 2 to 2.5 in leveling kit listed for your engine (Lift Kit Guide)
  2. 35x12.50 tires on 9 in wheels, +25 to 0 offset (Wheel Fitment Guide)
  3. Headlight aim and an alignment

Ranch and trail

  1. A winch bumper with adaptive cruise provision (Bumper & Armor Guide)
  2. A 16,500 lb class winch and heavy-duty recovery gear (Winch & Recovery Guide)
  3. Springs rated for the weight, and 37s if your setup allows

Shop All F-250 Super Duty Parts →

6. Frequently Asked Questions

What is the bolt pattern on a 2023+ Ford F-250?

The 2023+ F-250 Super Duty uses an 8x170 mm bolt pattern with a 124.9 mm center bore. Check your owner's manual for lug thread size and torque.

What is the biggest tire that fits a stock F-250?

Owners commonly run 35s on stock non-Tremor trucks, and Tremor owners report 37x12.50R18 tires with little or no rubbing. Wheel width and offset change the result, so check before you buy.

What size leveling kit should I get for my F-250?

A 2 to 2.5 in front leveling kit is the most common. Make sure it's listed for your engine and package, since diesel, gas and Tremor trucks often need different kits.

What size winch does an F-250 need?

About 1.5 times GVWR. With Ford's F-250 GVWRs from 10,000 to about 11,400 lb, that's roughly 15,000 to 17,100 lb, so a 16,500 lb class winch suits most trucks.

Do you sell diesel delete parts?

No. We only sell emissions-compliant parts for the 6.7L Power Stroke that keep the factory emissions system in place.

Do 2017 to 2022 Super Duty parts fit a 2023 F-250?

Some do and many don't. The 2023 Super Duty was redesigned, so bumpers, lighting and many suspension and engine parts are specific to 2023+. Always check that a part lists your model year.

7. Sources & Technical References

Not sure what fits your F-250? Call 419-670-3141 or email sales@offroadsource.info for a free fitment check.