GMC Sierra 2500 HD Tire Size Guide
Factory tire sizes by trim, 35s vs 37s, the AT4 and AT4X baselines, and load range for the 2020+ GMC Sierra 2500 HD, with owner-reported fitment from heavy-duty GM trucks.
Quick Answer
Factory Sierra 2500 HD tires run from about 31.5 in (245/75R17) to about 34.1 in (275/65R20 on AT4, Denali and Denali Ultimate). The AT4X comes on 35 in Goodyear Territory MT tires. Narrow 35s like 35x11.50R20 (LT295/65R20) are the easy upgrade: owners report them at stock height with at most slight full-lock rubbing. 35x12.50s usually want a 2 in level and the right offset. 37s are typically a lift build, or a kit build on the AT4X AEV Edition. Stick with Load Range E or higher on a 3/4-ton truck.
Table of Contents
- What You Need to Know First
- Which Option Is Right for You?
- Tire Size by Setup
- AT4, AT4X and Denali Baselines
- How Tire Size Affects Your Sierra HD
- Supporting Parts You May Need
- Common Mistakes
- Recommended Setup Paths
- Real Build Data: Tire Size by Suspension
- Real GMC Sierra 2500 HD Builds
- Frequently Asked Questions
- Related Guides
- Sources & Technical References
1. What You Need to Know First
GMC builds the Sierra 2500 HD on 17, 18 and 20 in wheels, plus the 35 in AT4X package. Your trim sets your starting point; your suspension, wheel offset and tire width decide how far you can go.
| Trim | Factory Wheel | Factory Tire | Approx. Height |
|---|---|---|---|
| Pro, SLE | 17x7.5 | 245/75R17 or 265/70R17 | 31.5 or 31.6 in |
| SLT | 18x8 | 275/70R18 | 33.2 in |
| AT4, Denali, Denali Ultimate | 20x8.5 | 275/65R20 | 34.1 in |
| AT4X | 18 in | 35 in Goodyear Territory MT (owners list LT305/70R18) | 34.8 in |
Equipment varies by year and option package, so check the tire placard on your driver's door jamb. Tire labels aren't exact: a 295/65R20 is sold as a 35x11.50R20 and one owner measured his at about 35.4 in tall and 11.8 in wide. Always compare the real measured size, not the name.
2. Which Option Is Right for You?
3. Tire Size by Setup
These are owner reports from 2020+ GM 2500 and 3500 HD trucks, not guarantees. Rubbing depends on the exact tire, wheel offset and how hard you turn and flex.
| Setup | 295/65R20 (35x11.50) | 35x12.50 | 37x12.50 |
|---|---|---|---|
| Stock height, factory 20s | Owners report a fit; one reported slight rubbing at full lock in reverse, another tied back the fender liner | Measure at full lock; owners warn about shock and control arm contact with factory offset | Not recommended |
| 2 to 3 in level with UCAs | Fits | A leveled 2021 Sierra 2500 HD runs 35x12.50R18 on 18x8 +18 wheels | Some try it; expect trimming and full-lock contact |
| 4 in lift and up | Fits | Fits | The usual route; follow the kit's wheel spec |
| AT4X AEV Edition with AEV kit | – | – | AEV lists 37x12.50 on factory wheels; 37x13.50 needs Salta XD wheels |
What the reports say: width matters as much as height. Narrow 35s clear far more easily than 12.50 in wide tires on a Sierra HD, which is why 295/65R20 and 35x11.50 sizes are so popular with owners who tow.
4. AT4, AT4X and Denali Baselines
AT4
The AT4 comes on 20 in gloss-black wheels with the Off-Road Suspension Package (Rancho shocks and skid plates) at about 34 in of factory tire. It's a natural candidate for 295/65R20s on the factory wheels; one owner of a 2024 3500 AT4 reported them with no rubbing after tying back the fender liner.
AT4X
The AT4X starts where most builds end: 35 in Goodyear Territory MT tires, a 1.5 in factory lift and DSSV dampers. Going to 37s is mostly about tire width and the front bumper. AEV's clearance kit (brackets, trim templates and closeouts) is listed for 2024+ AT4X AEV Edition trucks and requires the AEV front bumper; the standard AT4X bumper and flares are different.
Denali and Denali Ultimate
Both run 20 in wheels and 275/65R20 tires from the factory. If you want to keep a Denali's ride and road manners, a narrow 35 like 295/65R20 on the factory wheels is the least invasive upgrade.
5. How Tire Size Affects Your Sierra HD
Load Range
A 3/4-ton truck needs tires rated for its axle weights, especially a Duramax with a trailer. Load Range E is the usual minimum, and some owners choose Load Range F for heavy towing. Check the load index against your door placard's axle ratings.
Air Pressure
Big flotation sizes don't always need factory pressures. One owner on 37x12.50R20s saw center wear at 55 psi and moved lower after chalk testing. Use the tire maker's load chart for your actual axle weights, and go back up when towing.
Gearing
Taller tires act like taller gears. The Duramax hides it better than the 6.6L gas V8, but both feel it with a trailer. Call us before choosing a gear ratio.
Speedometer
Bigger tires throw off the speedometer and odometer. Owners of 2024+ trucks report that ECU-based recalibration is limited on GM's newer electrical architecture and that an in-line module is one of the few options. Dealers may also be able to help; ask.
Spare Tire
The spare hangs under the bed. A larger, heavier spare may not fit the factory carrier or may hang low; measure before you buy a full matching set.
6. Supporting Parts You May Need
7. Common Mistakes
- Going wide when narrow would do. 35x11.50s fit with far less work than 35x12.50s.
- Trusting the label. Compare measured height and width, not the name on the sidewall.
- Dropping load range. A light-duty tire on a towing HD is a safety problem.
- Ignoring the fender liner. Liner contact is common and fixable; it's different from hitting the control arm or shock.
- Skipping the speedometer fix. Your odometer and speed readings will be off.
8. Recommended Setup Paths
Simple tow-rig upgrade
- Factory suspension
- Factory 20s
- LT295/65R20 (35x11.50), Load Range E
Full 35s
- 2 in leveling kit with UCAs
- Wheels around +18 offset
- 35x12.50 tires
37s
- 4 in lift kit or more
- Wheels to the kit's spec
- 37x12.50R20 and a gearing plan
9. Real Build Data: Tire Size by Suspension
This table summarizes 138 owner-reported GMC Sierra 2500 HD builds (2020 to 2026), counted by suspension and tire size. "Rubbed" includes slight rubbing at full steering lock; "trimmed" covers any trimming, from plastic liner trimming to cutting metal.
| Suspension | 33 in | 34 in | 35 in | 37 in | 38 in and up |
|---|---|---|---|---|---|
| Stock | 12 builds · 4 rubbed, 3 trimmed | 6 builds · 2 rubbed, 3 trimmed | 20 builds · 8 rubbed, 9 trimmed | 2 builds · 1 rubbed, 2 trimmed | – |
| Leveling kit | 6 builds · 5 rubbed, 4 trimmed | 2 builds · 1 rubbed, 2 trimmed | 34 builds · 17 rubbed, 22 trimmed | 1 build · 1 rubbed | – |
| 2 to 3 in lift | 2 builds · 2 rubbed, 2 trimmed | 1 build · 1 rubbed, 1 trimmed | 11 builds · 6 rubbed, 7 trimmed | 3 builds · 1 rubbed, 3 trimmed | – |
| 3.5 to 4.5 in lift | – | – | 4 builds · 2 rubbed, 3 trimmed | 3 builds · 1 rubbed, 3 trimmed | – |
| 5 to 6.5 in lift | – | – | 7 builds · 3 rubbed, 7 trimmed | 11 builds · 4 rubbed, 10 trimmed | 1 build · no rubbing, 1 trimmed |
| 7 in lift and up | – | – | 3 builds · 1 rubbed, 3 trimmed | 5 builds · 3 rubbed, 5 trimmed | 2 builds · 1 rubbed, 1 trimmed |
Across these builds, the most common combination is 35 in tires on a leveling kit setup. 47% reported some rubbing, mostly slight rubbing at full lock, and 67% did some trimming. Lift height alone doesn't decide fit: wheel offset, tire width and how hard you turn and flex matter just as much.
10. Real GMC Sierra 2500 HD Builds
Real GMC Sierra 2500 HD builds from our wheel and tire gallery. Each shows the exact wheel, offset, tire size and suspension, plus whether it rubbed or needed trimming.
11. Frequently Asked Questions
What size tires come on a GMC Sierra 2500 HD?
Factory sizes run from 245/75R17 and 265/70R17 on Pro and SLE, to 275/70R18 on SLT, to 275/65R20 on AT4, Denali and Denali Ultimate. The AT4X comes on 35 in Goodyear Territory MT tires. Check your door placard for your exact size.
Will 35s fit a stock Sierra 2500 HD?
Narrow 35s often do. Owners report LT295/65R20 (35x11.50R20) tires on stock-height HD trucks with at most slight full-lock rubbing or liner contact. Wider 35x12.50s usually need a level and lower-offset wheels.
What tire size does the Sierra 2500 HD AT4 have?
The AT4 rides on 20 in wheels with 275/65R20 tires, about 34.1 in tall. Many AT4 owners step to 295/65R20 on the factory wheels.
Can a Sierra HD AT4X run 37s?
The AT4X AEV Edition can with AEV's 37 in clearance kit and AEV front bumper; AEV lists 37x12.50 on factory wheels and 37x13.50 on Salta XD wheels. A standard AT4X needs more planning around its bumper and flares.
Should I run 35x11.50 or 35x12.50 on my Sierra HD?
If you tow or want the least work, 35x11.50. It fits at or near stock height. 35x12.50s look bigger but need more room, usually a level and wheels with less offset.
What load range do I need on a Sierra 2500 HD?
Load Range E is the usual minimum for a 3/4-ton truck. Some owners who tow heavy pick Load Range F. Match the load index to the axle ratings on your door placard.
12. Related Guides
13. Sources & Technical References
- Build data: 138 owner-reported GMC Sierra 2500 HD builds, 2020 to 2026 model years, compiled by Offroad Source.
- Factory wheel and tire sizes: TireWheelGuide, 2024 GMC Sierra 2500HD and GMC Sierra HD
- 295/65R20 on stock-height HD trucks: GM-Trucks.com
- 35x11.50 and 35x12.50 on factory 20s: GM-Trucks.com
- AT4X factory tire size: GM-Trucks.com
- 37 in clearance kit for AT4X AEV Edition: GM Authority
Not sure what fits your Sierra HD? Call 419-670-3141 or email sales@offroadsource.info for a free fitment check.





