Ram 1500 Wheel Fitment Guide
Bolt pattern, center bore, factory offsets and the aftermarket wheel setups that work on the 2019+ Ram 1500 (DT), with an offset chart showing how far wheels stick out and why the Ram 1500 Classic is a different fitment.
Quick Answer
The 2019+ Ram 1500 (DT) uses a 6x139.7 mm (6x5.5 in) bolt pattern, a 77.8 mm center bore and M14x1.5 lug threads on every trim, including the Rebel, TRX and RHO. Factory wheels are 18x8, 20x9 or 22x9 at a +19 mm offset; the TRX and RHO use 18x9 +19. The older Ram 1500 Classic is 5x139.7 and does not share wheels with the DT. For bigger tires, owners commonly move to wheels around 0 offset, which push the tire out for clearance at the cost of more poke. Always judge offset together with wheel width.
Table of Contents
- What You Need to Know First
- Ram 1500 Wheel Specs
- Factory Wheels by Trim
- Offset Chart: How Far Will It Stick Out?
- Offset, Width & Rubbing
- Supporting Parts You May Need
- Common Mistakes
- Common Owner Configurations
- Real Build Data: Popular Wheel Setups
- Real Ram 1500 Builds
- Frequently Asked Questions
- Related Guides
- Sources & Technical References
1. What You Need to Know First
- DT vs Classic. The new-body DT (2019+) is 6-lug. The older-body Ram 1500 Classic, sold alongside it, is 5-lug. Wheels, lug nuts and spacers don't cross over.
- Same pattern on every DT trim. Tradesman through Tungsten, plus the Rebel, TRX and RHO, all use 6x139.7 with a 77.8 mm bore.
- Offset is tight from the factory. At +19 mm, factory wheels tuck the tire in. Going to a lower offset moves the tire out, which helps clear the suspension but can push it into the fender liner or bumper at full lock.
- Load rating. A half-ton that tows needs wheels rated for its weight. Check the wheel's load rating against your axle ratings on the door placard.
2. Ram 1500 Wheel Specs
| Spec | Ram 1500 DT (2019+) |
|---|---|
| Bolt pattern | 6x139.7 mm (6x5.5 in), all trims |
| Center bore | 77.8 mm |
| Lug thread | M14x1.5 |
| Lug nut torque | See your owner's manual |
| Factory offset | +19 mm |
| Ram 1500 Classic (for comparison) | 5x139.7 mm, 77.8 mm bore; not interchangeable |
3. Factory Wheels by Trim
| Trim / Configuration | Factory Wheel | Factory Tire |
|---|---|---|
| Tradesman, Big Horn (and similar base trims) | 18x8 +19 or 20x9 +19 | 275/65R18 or 275/55R20 |
| Laramie, Limited, Longhorn | 20x9 +19 or 22x9 +19 | 275/55R20 or 285/45R22 |
| Tungsten (2025+) | 22x9 +19 | 285/45R22 |
| Rebel (all years), Warlock (2025+) | 18x8 +19 | 275/70R18 |
| TRX (2021 to 2024) | 18x9 +19 | 325/65R18 |
| RHO (2025+) | 18x9 +19 | 325/65R18 |
Exact availability varies by year and package; your door placard lists your factory size.
4. Offset Chart: How Far Will It Stick Out?
Compared against a factory 20x9 +19 wheel. Backspacing is calculated from width and offset. Positive numbers mean the wheel face moves outward.
| Wheel | Backspacing (approx.) | Outer Edge vs Stock | Inner Edge vs Stock |
|---|---|---|---|
| 20x9 +19 (factory) | 5.75 in | – | – |
| 18x8.5 +0 | 4.75 in | About 0.6 in further out | About 0.9 in more clearance |
| 20x9 +0 | 5.0 in | About 0.75 in further out | About 0.75 in more clearance |
| 20x9 +18 | 5.7 in | About the same | About the same |
| 20x10 -18 | 4.8 in | About 2 in further out | About 1 in more clearance |
| 20x10 -24 | 4.55 in | About 2.2 in further out | About 1.2 in more clearance |
Lower offsets give the tire more room from the upper control arm and suspension, but a wider tire pushed further out is more likely to touch the fender liner, bumper or mud flap at full lock. More poke also throws more mud and road spray onto the body.
Shop Ram 1500 Wheels → Shop Wheels by Size →
5. Offset, Width & Rubbing
Offset & Width
Offset tells you where the mounting face sits, but width decides how far each edge moves. Going 1 in wider adds about half an inch on each side. That's why a 20x10 -18 sticks out far more than a 20x9 +0 even though the offsets are only 18 mm apart.
Inner vs Outer Rubbing
Inner rubbing happens when a wide tire on a high-offset wheel touches the upper control arm or suspension parts. Outer rubbing happens at the fender liner, bumper or mud flap, usually at full lock or when the suspension compresses. Lower offset fixes the first and can cause the second.
Wheel Diameter
18 in wheels allow taller sidewalls for off-road use and a softer ride. 20 in wheels are the most common street size, with plenty of 33 and 35 in tire options. 22 in wheels look clean but leave little sidewall for trail use.
Lug Nuts & TPMS
Use M14x1.5 lug nuts with the seat type the wheel maker specifies; aftermarket wheels often need different lugs than factory. Move your factory TPMS sensors to the new wheels, or buy a second set.
Spacers
Wheel spacers lower effective offset on factory wheels. Use hub-centric, 6x139.7 spacers rated for a full-size truck, and torque them to the maker's spec. They add the same poke and liner rubbing risk as a low-offset wheel.
6. Supporting Parts You May Need
7. Common Mistakes
- Buying a 5x5.5 wheel. That's the Ram 1500 Classic and older Ram pattern. The DT is 6x5.5.
- Looking at offset without width. A wider wheel moves both edges.
- Going too low on offset with wide tires. It trades inner clearance for liner and bumper rubbing.
- Ignoring load rating. Match it to your axle ratings if you tow or haul.
- Reusing the wrong lug nuts. Seat type has to match the wheel.
8. Common Owner Configurations
Clean street look
- 20x9 around +18
- Factory or 33 in tire
- Factory suspension or level
35s on 18s
- 18x8.5 or 18x9 around 0 offset
- 35x11.50R18 or similar
- About 3 in of lift; one owner reported no rubbing on 18x8.5 +0
Aggressive stance
- 20x10 in the -18 to -24 range
- 33x12.50R20 or 35x12.50R20
- Level or lift, plus trimming or flares as needed
9. Real Build Data: Popular Wheel Setups
The most common wheel setups across 786 owner-reported Ram 1500 builds (2019 to 2025). Backspacing is calculated from width and offset. "Rubbed" includes slight rubbing at full steering lock.
| Wheel | Offset (mm) | Backspacing | Builds | Tire Sizes Run | Result |
|---|---|---|---|---|---|
| 20x10 | -18 | about 4.8 in | 114 | 32 in and under, 33 in, 34 in, 35 in, 37 in | 30 of 114 rubbed |
| 18x9 | -12 | about 4.5 in | 73 | 32 in and under, 33 in, 34 in, 35 in | 15 of 73 rubbed |
| 22x12 | -44 | about 4.8 in | 72 | 32 in and under, 33 in, 35 in, 37 in | 43 of 72 rubbed |
| 20x10 | -24 | about 4.6 in | 61 | 32 in and under, 33 in, 34 in, 35 in, 37 in | 14 of 61 rubbed |
| 20x9 | +1 | about 5.0 in | 55 | 33 in, 34 in, 35 in, 37 in | 6 of 55 rubbed |
| 20x10 | -19 | about 4.8 in | 51 | 32 in and under, 33 in, 34 in, 35 in, 37 in | 13 of 51 rubbed |
| 22x10 | -18 | about 4.8 in | 43 | 32 in and under, 33 in, 35 in, 37 in | 11 of 43 rubbed |
| 20x12 | -44 | about 4.8 in | 32 | 32 in and under, 33 in, 35 in, 37 in | 27 of 32 rubbed |
423 of 786 builds run 20 in wheels. Rubbing depends on the whole setup, so use these as starting points and call us to confirm yours.
10. Real Ram 1500 Builds
Real Ram 1500 builds from our wheel and tire gallery. Each shows the exact wheel, offset, tire size and suspension, plus whether it rubbed or needed trimming.
11. Frequently Asked Questions
What is the Ram 1500 bolt pattern?
The 2019+ Ram 1500 (DT) uses a 6x139.7 mm (6x5.5 in) bolt pattern with a 77.8 mm center bore and M14x1.5 lug threads. The older Ram 1500 Classic uses 5x139.7 mm.
Do Ram 1500 Classic wheels fit a 2019+ Ram 1500?
No. The Classic is 5-lug and the DT is 6-lug, so wheels don't interchange.
What offset are factory Ram 1500 wheels?
Factory DT wheels are +19 mm offset in 18x8, 20x9 and 22x9 sizes. The TRX and RHO use 18x9 +19.
Do TRX wheels fit a regular Ram 1500?
They share the 6x139.7 pattern and 77.8 mm bore, so they bolt on. The 18x9 wheel and 325/65R18 tire are a bigger package than standard trims come with, so clearance on a standard truck isn't guaranteed. Check before you buy.
What wheel offset is best for 35s on a Ram 1500?
Owners commonly run around 0 offset for 35s, often with a lift. One 2026 Big Horn ran 35x11.50R18 on 18x8.5 +0 with a 3 in lift and reported no rubbing. Wider tires and more negative offsets raise the risk of liner rubbing.
12. Related Guides
13. Sources & Technical References
- Build data: 786 owner-reported Ram 1500 builds, 2019 to 2025 model years, compiled by Offroad Source.
- Bolt pattern, center bore, thread and factory sizes: TireWheelGuide, 2025 Ram 1500 and 2019 Ram 1500
- TRX and RHO wheels: TireWheelGuide, 2021 TRX and 2025 RHO
- Ram 1500 Classic bolt pattern: TireWheelGuide, 2022 Ram 1500 Classic
- Factory tire sizes by trim: TireSize.com, 2025 Ram 1500
- 35s on 18x8.5 +0 wheels: RamForum.com owner discussion
Not sure which wheels fit your Ram? Call 419-670-3141 or email sales@offroadsource.info for a free fitment check.





