JKS Manufacturing JKSOGS924 Steering Stabilizer Tie Rod Mount for 07-18 Jeep Wrangler JK

The factory mounting location of the steering stabilizer on Wrangler JK models is highly vulnerable to impact damage. It only takes one encounter with a trail obstacle to render the damper useless. This is exactly why JKS Manufacturing developed the Steering Stabilizer Relocation Bracket, which raises the mounting point on the axle to a much safer location. But what about the factory mounting point on the tie rod... is there a better alternative available? There is now.

Additional Details

The Steering Stabilizer Tie Rod Mount from JKS is a direct replacement for the light-duty and awkwardly shaped factory part. Unlike the original mount which only accommodates the factory mounting position, the new JKS mount offers as many as six unique mounting configurations. So no matter how your stabilizer is positioned, the angle of the mounting stud will match. This prevents any binding when mounted, and eliminates stress at the stabilizer shaft which is one of the leading causes of premature wear and failure. The Steering Stabilizer Tie Rod Mount is also much stronger and more compact than the factory part. The low-profile base has been designed to clear all aftermarket differential covers with room to spare, whereas the original part would interfere with most oversized covers. Unlike conventional U-bolts, JKS supplies special high-torque U-bolt straps that clamp to the tie rod with a tenacious grip. As a result, the mounting position will never creep when subjected to extreme steering forces. To prevent corrosion, a protective zinc finish covers the Tie Rod Mount and U-bolt straps. Premium quality hardware and fine thread fasteners ensure a secure attachment. Installation is a quick and simple bolt-on process and can be accomplished in just a few minutes with basic hand tools.

The Steering Stabilizer mount can be installed in various configuration based on your individual requirements. Illistrated below are just two of the most common configurations.

Product Features Eliminates binding of steering stabilizer shaft caused by misaligned mounting points Precisely positions installation point on tie rod to accommodate original or relocated axle mount High-torque U-bolt straps and fine-threaded fasteners greatly increase grip on tie rod Up to six unique configurations ensure maximum mounting versatility Low-profile design easily clears aftermarket and oversized differential covers Easy bolt-on solution to leading cause of premature steering damper failure

Installation Notes
Installation Difficulty:
Skill Level 2 -
Intermediate
1. Not compatible with OE steering stabilizer. Requires aftermarket stabilizer with 5/8" ID bushing.
Installation Time: Less than an hour
Installation Instructions Available
Parts Included

Specifications

• Shipping Weight: 3lb
• Shipping Dimensions: 9in x 5in x 5in (L x W x H)

Fitment

• 2018 Jeep Wrangler 2-Door (JK)
• 2017 Jeep Wrangler 2-Door (JK)
• 2016 Jeep Wrangler 2-Door (JK)
• 2015 Jeep Wrangler 2-Door (JK)
• 2014 Jeep Wrangler 2-Door (JK)
• 2013 Jeep Wrangler 2-Door (JK)
• 2012 Jeep Wrangler 2-Door (JK)
• 2011 Jeep Wrangler 2-Door (JK)
• 2010 Jeep Wrangler 2-Door (JK)
• 2009 Jeep Wrangler 2-Door (JK)
• 2008 Jeep Wrangler 2-Door (JK)
• 2007 Jeep Wrangler 2-Door (JK)
• 2018 Jeep Wrangler Unlimited 4-Door (JK)
• 2017 Jeep Wrangler Unlimited 4-Door (JK)
• 2016 Jeep Wrangler Unlimited 4-Door (JK)
• 2015 Jeep Wrangler Unlimited 4-Door (JK)
• 2014 Jeep Wrangler Unlimited 4-Door (JK)
• 2013 Jeep Wrangler Unlimited 4-Door (JK)
• 2012 Jeep Wrangler Unlimited 4-Door (JK)
• 2011 Jeep Wrangler Unlimited 4-Door (JK)
• 2010 Jeep Wrangler Unlimited 4-Door (JK)
• 2009 Jeep Wrangler Unlimited 4-Door (JK)
• 2008 Jeep Wrangler Unlimited 4-Door (JK)
• 2007 Jeep Wrangler Unlimited 4-Door (JK)