RockJock's Adjustable Sway Bar End Link Set features 14 in. long link rods and their high-end sealed rod ends. The rods feature 4 1/4 in. of 1/2 in.-20 LH thread and 2 5/8 in. of 1/2 in.-20 RH thread, providing adjustment as-is and extra thread, allowing you to cut them shorter as deemed necessary by your application. Link sets are included in their Antirock Sway Bar Kits but can be used universally in many applications to replace non-adjustable sway bar links.
Additionally, if you have changed the lift amount on your vehicle you may need a different length of sway bar links to accommodate your new lift. You can simply buy a completely new link set to accommodate your needs. The rod ends in this kit feature 12mm-1.75 RH thread studs and locking nuts and jam nuts are included. These links and sealed rod ends are a direct replacement for link sets that feature heim joints.
Kit Fits:
(Compatible with) Jeep JL Wrangler Rear Antirock Sway Bar Kits – All (Compatible with) Jeep TJ Wrangler and Unlimited (LJ) Rear Antirock Sway Bar Kits - All (Compatible with) Universal Antirock Sway Bar Kits - All Universal Use Kit Includes:
(2) 14 in. End Link Rods (gold) (2) 1/2 in.-20 LH Sealed Rod Ends (2) 1/2 in.-20 RH Sealed Rod Ends (2) 1/2 in.-20 LH Jam Nuts (2) 1/2 in.-20 RH Jam Nuts Gold Rod Specs.:
14 in. Long 1/2 in. Diameter 1/2 in.-20 LH Threads – 2 5/8 in. Long 1/2 in.-20 RH Threads – 4 1/4 in. Long Center Smooth Area – 7 1/8 in. Long Adjustment Range:
Closed – At maximum trimming of this rod (15/16 in. of thread left on each side and the ends and jam nuts screwed on til they meet the smooth area of the rod), C-C is 12.640 in. Extended – Uncut rods with ends installed safely adjust out to 17.640 in. C-C Notes:
These are optional, upgraded links that are compatible with our JL, TJ and LJ rear Antirock Sway Bar Kits Wrench flats: gold rods - 11mm wrench, sealed rod ends – 18mm wrench, jam nuts - 3/4 in. wrench
