null
Exclusive Discounts! Add To Cart For Best Pricing!

Jeep Gladiator Performance Guide

Brakes, gearing, tuners, exhaust and intakes for the Jeep Gladiator: what actually makes a 3.6L Gladiator perform better, what's mostly sound, and where to spend first.

Last Updated: Oct 2, 2026Vehicle: Jeep Gladiator JT (2020+)Topic: PerformanceBy Austin, owner of Offroad Source

Quick Answer

Honestly, there isn't much bolt-on horsepower to gain on a 3.6L Gladiator. Exhausts and intakes mostly change the sound. The upgrades you'll actually feel are brakes and gearing, especially once you're on 35s or 37s. Start with a brake kit like the PowerStop Z36, regear for your tire size, and recalibrate the speedometer after any tire change.

1. What You Need to Know First

Most Gladiators run the 3.6L Pentastar V6, rated at 285 hp and 260 lb-ft. It's a solid engine, but it's naturally aspirated, so bolt-on parts add very little power. What does change how a Gladiator drives is everything around the engine: bigger tires add weight and rotating mass, which makes the truck slower to accelerate and slower to stop. That's why we point most owners to brakes and gearing before anything else.

UpgradeWhat You'll Notice on a 3.6LInstall Difficulty
BrakesBig: shorter stops, no fade on long gradesModerate: bolt-on pads and rotors
Gearing & DrivelineBig: restores acceleration and shifting on 35s and 37sInvolved: professional install recommended
Tuners & GaugesCorrect speedometer and shift points after a tire changeEasy: plugs into the OBD-II port
ExhaustMostly sound, a small low-end gainModerate: 2 to 3 hours
Cold Air IntakeMostly intake sound, small gainEasy
CoolingLower temps when towing or crawling in heatEasy to moderate

From 2021 to 2023, the Gladiator was also offered with the 3.0L EcoDiesel. Engine parts like exhausts, intakes and tunes are different between the two engines, so check fitment for your engine before ordering.

2. Brakes

Brakes are the performance upgrade we recommend most for the Gladiator. Bigger, heavier tires take more effort to stop, and a loaded bed or a trailer adds even more. The factory brakes can fade on long downhill grades and on steep off-road descents. A truck-and-tow brake kit fixes that.

Our Pick: PowerStop Extreme Z36 Truck & Tow Brake Kit (K8509-36)

  • Fits 2020 to 2026 Jeep Gladiator JT, front and rear
  • Drilled and slotted rotors for better heat dissipation when towing and off-roading
  • Carbon-fiber ceramic pads: severe-duty stopping with low dust
  • Stainless-steel hardware included, bolt-on install

"The PowerStop Z36 rotors and HD pads helped out a LOT on mountain roads AND Windrock. No brake fade on long 7-9% grades, and brakes held while navigating downforce off-roading."

Customer feedback on the Z36 kit
Drilled and slotted brake rotor with red caliper on a Jeep front axle, with upgraded coil springs and control arms, installed at Offroad Source
Drilled and slotted rotors on one of our builds.

After installing new pads and rotors, bed them in by following the instructions in the kit. It's how the pads reach full stopping power.

Shop Gladiator Brakes →

3. Gearing & Driveline

If your Gladiator feels sluggish after going to bigger tires, gearing is the fix. A taller tire acts like a taller gear, so the engine works harder to get the truck moving and the transmission hunts between gears on the highway. Regearing the axles brings back the acceleration and shifting the truck had on stock tires. It matters more on 37s than on 35s, and more on trims with taller factory gears.

The right ratio depends on your trim, axle, tire size and how you drive, so there's no one answer for every Gladiator. Call us at 419-670-3141 with your trim and tire size and we'll help you pick the right gears. Regearing is precise work, so we recommend a professional install.

Shop Gladiator Driveline →

4. Tuners & Speedometer Calibration

Any time you change tire size, the Gladiator's speedometer and odometer read wrong, and transmission shift points no longer match the truck. A tuner or programmer lets you enter your new tire size so the speedometer reads correctly again. Some also let you turn certain factory features on or off. Gauges and monitors are useful for watching temperatures when towing or crawling.

Shop Gladiator Tuners & Gauges →

5. Exhaust

A cat-back exhaust is the most popular engine upgrade for the 3.6L Gladiator, but be realistic: you're buying it for the sound. Expect a deeper tone and a small low-end gain, not a big jump in power.

Our Pick: Gibson Elite Series Single Exit Cat-Back Exhaust (617409)

  • Fits 2020 to 2026 Jeep Gladiator JT with the 3.6L
  • 3 in T-304 stainless steel mandrel-bent tubing
  • Moderate tone with an aggressive outside sound, while keeping drone down in the cab
  • Single driver-side exit with a 4 in slash-cut stainless tip
  • 2 to 3 hour install, no modifications needed
  • Limited lifetime warranty

Shop Gladiator Exhaust →

6. Cold Air Intakes

A cold air intake swaps the factory airbox for a less restrictive filter and tube. On the 3.6L, the real gains are a stronger intake sound and a reusable filter. Like the exhaust, don't expect much added power. If you take your Gladiator through deep water, check where the intake draws air before you buy.

Shop Gladiator Intakes →

7. Engine Performance & Cooling

Engine performance parts cover service and replacement items like spark plugs, coils and filters. Fresh parts keep the 3.6L running the way it should. Cooling upgrades help when you're towing, hauling or crawling slowly in summer heat, when there's less air moving through the radiator.

Shop Gladiator Engine Performance → Shop Gladiator Cooling →

8. Frequently Asked Questions

How much horsepower does a cold air intake or exhaust add to a 3.6L Gladiator?

Not much. The 3.6L Pentastar is rated at 285 hp and 260 lb-ft, and because it's naturally aspirated, intakes and exhausts mostly change the sound. Buy them for the tone, not for big power gains.

What is the best performance upgrade for a Jeep Gladiator?

For most owners, it's brakes and gearing. Bigger tires make the Gladiator slower to stop and slower to accelerate. A brake kit like the PowerStop Z36 and the right gear ratio for your tire size make the biggest difference you'll feel.

Do I need to regear my Gladiator for 35 or 37 inch tires?

It depends on your trim's factory gears and how you drive. On 37s, most Gladiators feel sluggish without a regear; on 35s, many owners are fine. Call us at 419-670-3141 with your trim and tire size for a recommendation.

Do I need to recalibrate my speedometer after bigger tires?

Yes. Bigger tires make the speedometer and odometer read low and throw off transmission shift points. A tuner or programmer lets you enter the new tire size so everything reads correctly.

Are the PowerStop Z36 brakes worth it on a Gladiator?

If you tow, haul, run bigger tires or drive mountain grades, yes. The Z36 kit replaces the front and rear pads and rotors with drilled and slotted rotors and carbon-fiber ceramic pads built to resist fade under heavy use.

How long does a Gibson cat-back exhaust take to install on a Gladiator?

About 2 to 3 hours. The Gibson Elite single exit bolts on with no cutting or modifications.

Do 3.6L performance parts fit the Gladiator EcoDiesel?

Usually not. The 3.0L EcoDiesel (2021 to 2023) uses different exhaust, intake and tuning parts than the 3.6L. Always check fitment for your engine.

10. Sources & Technical References

Not sure where to start with your Gladiator? Call 419-670-3141 or email sales@offroadsource.info.